Related
Hi guys. I am in desperate need of your help.
I have a Sony Xperia V LT25i which used to have a CyanogenMod Rom 12.1 up and running and TWRP 2.8.
I decided to update TWRP from the Bootloader, hoping I could update it to later on to CyanogenMod 13.0, and stupidly picked it to update on boot instead of recovery and now my phone is bricked. it does nothing but load the "Sony" logo, then dim.
I tried fastboot from the computer, it does not detect my phone. I tried Sony Mobile Flasher, it does not detect my phone, i.e. I managed to flash most of the files from a factory rom except system.sin.
I can't get into recovery(Volume up + power button). I am able to get into fastboot and bootloader mode over the phone (blue and green lights), however, my computer does not detect it at all (I tried all the drivers I found on the internet, but not success).
Any suggestions? Please?
mrainman said:
Hi guys. I am in desperate need of your help.
I have a Sony Xperia V LT25i which used to have a CyanogenMod Rom 12.1 up and running and TWRP 2.8.
I decided to update TWRP from the Bootloader, hoping I could update it to later on to CyanogenMod 13.0, and stupidly picked it to update on boot instead of recovery and now my phone is bricked. it does nothing but load the "Sony" logo, then dim.
I tried fastboot from the computer, it does not detect my phone. I tried Sony Mobile Flasher, it does not detect my phone, i.e. I managed to flash most of the files from a factory rom except system.sin.
I can't get into recovery(Volume up + power button). I am able to get into fastboot and bootloader mode over the phone (blue and green lights), however, my computer does not detect it at all (I tried all the drivers I found on the internet, but not success).
Any suggestions? Please?
Click to expand...
Click to collapse
Which operating system are you running on your PC? Did you currently update it to windows 10, or a newer windows 10 version? If so you'll have to disable driver signature and install the drivers again.
St.Jimmy90 said:
Which operating system are you running on your PC? Did you currently update it to windows 10, or a newer windows 10 version? If so you'll have to disable driver signature and install the drivers again.
Click to expand...
Click to collapse
I am running windows 10 with its latest updates, and had had it for a while. I did disable driver signature and reinstalled the drivers but that did not fix it.
I am currently able to identify my device in fastboot as
PSDN: CB5A1WUDZ0&ZLP fastboot
I tried to flash a recovery.img to it, but it says it fails with
(bootloader) Flash of partition 'recovery' requested
FAILED (remote: "Partition not found" ).
finished. total time: 0.693s
Click to expand...
Click to collapse
any other advice, please?
mrainman said:
I am running windows 10 with its latest updates, and had had it for a while. I did disable driver signature and reinstalled the drivers but that did not fix it.
I am currently able to identify my device in fastboot as
PSDN: CB5A1WUDZ0&ZLP fastboot
I tried to flash a recovery.img to it, but it says it fails with
any other advice, please?
Click to expand...
Click to collapse
What happens if you extract to boot.img from your current 12.1 and try to flash it as boot.img?
St.Jimmy90 said:
What happens if you extract to boot.img from your current 12.1 and try to flash it as boot.img?
Click to expand...
Click to collapse
you are reading my thoughts. I just did that, and I have a bit of progress (I guess). I am in cyanogenmod recovery mode. however, I do not know how to proceed from here. I have the cyanogenmod 13.0 archive on my sdcard, however when I try to install it it says
install failed.
install /storage/540D-CA26/cm-13.0-20160920-nightly-tsubasa.zip finding update package.....
verifying update package....
installing update....
user data unifier tool
sdcard partition still contains files.
please copy your data from internal sdcard. do not format the partition yourself.
if you are sure you want to remove sdcard, and accept the losses, flash this zip again.
the device needs to be converted to unified userdata partition.
please read the information above.
failed to install /sideload/package.zip
please take note of all the above lines for report.
installation aborted.
Click to expand...
Click to collapse
I tried flashing it again, it kicks the same error.
mrainman said:
you are reading my thoughts. I just did that, and I have a bit of progress (I guess). I am in cyanogenmod recovery mode. however, I do not know how to proceed from here. I have the cyanogenmod 13.0 archive on my sdcard, however when I try to install it it says
I tried flashing it again, it kicks the same error.
Click to expand...
Click to collapse
Ok, your phone is recovered. I guess you're trying a CM13 nightly. It should work at the 2nd or 3rd time, though I'm not quite sure. Otherwise you could try to boot up to your Cm12.1 and install TWRP via a terminal emulator and the dd command. To me TWRP is way better than the CM recovery
St.Jimmy90 said:
Ok, your phone is recovered. I guess you're trying a CM13 nightly. It should work at the 2nd or 3rd time, though I'm not quite sure. Otherwise you could try to boot up to your Cm12.1 and install TWRP via a terminal emulator and the dd command. To me TWRP is way better than the CM recovery
Click to expand...
Click to collapse
It does not boot to my CM12.1. It simply freezes to "Sony" logo. however, if I hold volume up + power button it goes into recovery mode. should I keep on trying on installing 13.0? I tried about 4-5 times, still kicks the same error.
mrainman said:
It does not boot to my CM12.1. It simply freezes to "Sony" logo. however, if I hold volume up + power button it goes into recovery mode. should I keep on trying on installing 13.0? I tried about 4-5 times, still kicks the same error.
Click to expand...
Click to collapse
You could also try Cm14, it runs pretty good on my Xperia T. Unifying will wipe your internal storage though, so be aware. If you still got data on it you should try to flash CM12.1 again and safe your data
St.Jimmy90 said:
You could also try Cm14, it runs pretty good on my Xperia T. Unifying will wipe your internal storage though, so be aware. If you still got data on it you should try to flash CM12.1 again and safe your data
Click to expand...
Click to collapse
I was able to boot a TWRP from an unofficial CyanogenMod 12.1. I think I got it from here. I do not own an Xpire T, so my latest version of Cyanogen would be 13 ? (I Guess)
Thank you so much for your help!
mrainman said:
I was able to boot a TWRP from an unofficial CyanogenMod 12.1. I think I got it from here. I do not own an Xpire T, so my latest version of Cyanogen would be 13 ? (I Guess)
Thank you so much for your help!
Click to expand...
Click to collapse
Awesome!
Here you go for CM14:
http://forum.xda-developers.com/xperia-t-v/v-development/rom-cyanogenmod-14-0-xperia-t3461746
St.Jimmy90 said:
Awesome!
Here you go for CM14:
http://forum.xda-developers.com/xperia-t-v/v-development/rom-cyanogenmod-14-0-xperia-t3461746
Click to expand...
Click to collapse
Cheers! Your support means a lot!
mrainman said:
Cheers! Your support means a lot!
Click to expand...
Click to collapse
No worries mate, everyone runs into trouble once in a time and needs assistance I'm really glad it worked out
Hi, I've got a problem regarding TWRP and the recovery partition.
I have downloaded and flashed TWRP following the guide in the development section, but everytime I boot into recovery I get a black screen and the notification led glows white.
If I use the "fastboot boot" command I can access TWRP, but that's only temporary and won't work for me. I've tried flashing from fastboot in windows and flashing from the temporarily booted TWRP on the phone. If the custom recovery won't work at all, I'd at least like to get back to stock recovery.
Thx for your help!
lspflr said:
Hi, I've got a problem regarding TWRP and the recovery partition.
I have downloaded and flashed TWRP following the guide in the development section, but everytime I boot into recovery I get a black screen and the notification led glows white.
If I use the "fastboot boot" command I can access TWRP, but that's only temporary and won't work for me. I've tried flashing from fastboot in windows and flashing from the temporarily booted TWRP on the phone. If the custom recovery won't work at all, I'd at least like to get back to stock recovery.
Thx for your help!
Click to expand...
Click to collapse
i had this problem did you update to 3.5.3 version? or you are still on 3.5.1
btouareg said:
i had this problem did you update to 3.5.3 version? or you are still on 3.5.1
Click to expand...
Click to collapse
Still on 3.5.1
lspflr said:
Still on 3.5.1
Click to expand...
Click to collapse
that's why you have this problem
download 3.5.3 and flash it manually
try to open twrp via fastboot
then do a clean flash for 3.5.3
then everything will work normally
btouareg said:
that's why you have this problem
download 3.5.3 and flash it manually
try to open twrp via fastboot
then do a clean flash for 3.5.3
then everything will work normally
Click to expand...
Click to collapse
Ok, I ended up dirty flashing 3.5.3 via booted TWRP and then it worked! I'm just wondering what the rom version has to do with the recovery partition, as they - from my understanding - are two separate things and shouldn't interfere with each other.
My problem is solved though so thank you for your help!
lspflr said:
Ok, I ended up dirty flashing 3.5.3 via booted TWRP and then it worked! I'm just wondering what the rom version has to do with the recovery partition, as they - from my understanding - are two separate things and shouldn't interfere with each other.
My problem is solved though so thank you for your help!
Click to expand...
Click to collapse
Cool!! enjoy your new op3t and im glad that i helped you
Huawei P smart TWRP 3.2.1-0 EMUI 8.0FIG-LX1
Features:
Decryption DATA = works
• MTP and OTG = working
• Backup and Recovery = works
Note:
If you ask for a password to decrypt data
pin-code or password (it's worth it) to enter the screen you need to enter.
fastboot flash recovery_ramdisk twrp_p_smart.img
Автор: @Pretoriano80 XDA
@Pretoriano80 XDA
New TWRP 05.06.2018
fixed mounting problems, I corrected it (added images for firmware, including and here, added sections for wipe and backup).
Download New 05.06.2018
https://drive.google.com/file/d/1U68vtVbVwf4y1EELlOigLS6Wemc0A_P6/view?usp=drivesdk
Download
Stock recovery
https://drive.google.com/file/d/1dFFjCG2xeg9E08SZFA7jC9y21iX1sJgD/view?usp=drivesdk
Installation instructions for twrp
Preliminarily you must enable the factory unlock and unlock the loader.
ADB P SMART is allocated to the disk C better than one files with the image twrp, then start the search in Windows, the command line open from the administrator, then enter the command, but the phone must be in fastboot on the switched off phone, press the volume swing - and connect the cable install drivers, then on the command line write fastboot flash recovery_ramdisk twrp_p_smart.img Enter wait as all the settings, fastboot reboot. Reboot to the system there by clicking the volume swing + should get into TWRP.
DOWNLOAD ADB TWRP
https://drive.google.com/file/d/1GDUfPmDPf6Rp1o0dwdNoSeUC74JZGCiy/view?usp=drivesdk[\HIDE]
DOWNLOAD DRIVERS
[url]https://yadi.sk/d/YTsmimThu5nNK[/url][\HIDE]
Is this the same twrp a reported by ChinHon here?
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705
andymore said:
Is this the same twrp a reported by ChinHon here?
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705
Click to expand...
Click to collapse
This is a new, updated Recovery TWRP, not as if it's not about ChinHon it. Here, almost everything works, except for the erecovery section.
andymore said:
Is this the same twrp a reported by ChinHon here?
Click to expand...
Click to collapse
This is a new, updated Recovery TWRP, not as if it's not about ChinHon it. Here, almost everything works, except for the erecovery section.
Are there any issues performing wipes / factory resets with this version?
mwarner said:
Are there any issues performing wipes / factory resets with this version?
Click to expand...
Click to collapse
Problems were not observed, reset settings, formatting is working.
with the old Twrp from ChincHon I had many problems FCs but with these I have no problems with AoKP and Ressurection Remix super finally a useful Recovery Thank you for that
Dude, THANK YOU. Every other guide I read for installing TWRP on the P Smart just said to run fastboot flash recovery <filename> and it never worked. Following your instructions has gotten the recovery installed.
Saying that though; I've booted into recovery and all I've got is TWRP splash page. Anyone else had that issue?
noobstyle1337 said:
with the old Twrp from ChincHon I had many problems FCs but with these I have no problems with AoKP and Ressurection Remix super finally a useful Recovery Thank you for that
Click to expand...
Click to collapse
Not at all, if any problems write to me.
Trism said:
Dude, THANK YOU. Every other guide I read for installing TWRP on the P Smart just said to run fastboot flash recovery <filename> and it never worked. Following your instructions has gotten the recovery installed.
Saying that though; I've booted into recovery and all I've got is TWRP splash page. Anyone else had that issue?
Click to expand...
Click to collapse
You put on the official firmware p smart? With the modified kernel, there are some problems with the twrp input.
mak6021 said:
You put on the official firmware p smart? With the modified kernel, there are some problems with the twrp input.
Click to expand...
Click to collapse
Ah, good point. I installed AOSP 8.1 first, then installed TWRP. Any advice on what I can do to get around this? Is there a different version of TWRP I could try?
Trism said:
Ah, good point. I installed AOSP 8.1 first, then installed TWRP. Any advice on what I can do to get around this? Is there a different version of TWRP I could try?
Click to expand...
Click to collapse
I updated twrp in the post look at the beginning of the second link to download. Maybe it will do
.Try in erecovery to install twrp
where do i find the stock recovery if i want to restore it ???
where do i find the stock recovery for the p smart fig la1 if i want to restore it ???
ilyes9999 said:
where do i find the stock recovery for the p smart fig la1 if i want to restore it ???
Click to expand...
Click to collapse
Download
Stock recovery
https://drive.google.com/file/d/1dFFjCG2xeg9E08SZFA7jC9y21iX1sJgD/view?usp=drivesdk
[/QUOTE]
with Resurrection Remix everything works best no Fcs everything top only load lasts 4 hours
fig la1 ?
does it work for fig la1
noobstyle1337 said:
with Resurrection Remix everything works best no Fcs everything top only load lasts 4 hours
Click to expand...
Click to collapse
Honestly I do not know what this download is 4 hours is not very good.
And where to download Resurrection Remix for Huawei P Smart or enjoy 7s?
ilyes9999 said:
does it work for fig la1
Click to expand...
Click to collapse
Yes it works.
mak6021 said:
Honestly I do not know what this download is 4 hours is not very good.
And where to download Resurrection Remix for Huawei P Smart or enjoy 7s?
Click to expand...
Click to collapse
Oh sorry for my Bad english ..Batterie loading is 4 hours it is a bit slow
test assembly, it is possible to solve some problems.
If something does not work, write here.
Download.
https://drive.google.com/file/d/1PSbZCc6UdelMag56kTKVebpajItGtWnM/view?usp=drivesdk
When I restart my redmi 9 it opens automatically recovery mod even if I choose to reboot system it goes back to recovery mod once more plz help
I think there is a problem on the power button
I
Sleep04 said:
I think there is a problem on the power button
Click to expand...
Click to collapse
I doubt it it's working fine
farahi said:
When I restart my redmi 9 it opens automatically recovery mod even if I choose to reboot system it goes back to recovery mod once more plz help
Click to expand...
Click to collapse
I think your system get correpted.try to wape your data when you are in recovery mood.it should fix your device.if not follow next steps
is your bootloader unlocked and is you can go fastboot mood?if both answere is yes then download fastboot rom which version is you currently use then just flash it with miflash tool
Shas45558 said:
I think your system get correpted.try to wape your data when you are in recovery mood.it should fix your device.if not follow next steps
is your bootloader unlocked and is you can go fastboot mood?if both answere is yes then download fastboot rom which version is you currently use then just flash it with miflash tool
Click to expand...
Click to collapse
No mybootloader is not unlocked
I don't know why that happened I didn't flash twrp nor a custom rom
farahi said:
No mybootloader is not unlocked
I don't know why that happened I didn't flash twrp nor a custom rom
Click to expand...
Click to collapse
Ok format your userdata from recovery...
farahi said:
When I restart my redmi 9 it opens automatically recovery mod even if I choose to reboot system it goes back to recovery mod once more plz help
Click to expand...
Click to collapse
I faced this issue in the morning and just kept choosing Reboot system until it booted normally.
Jaberbenet said:
I faced this issue in the morning and just kept choosing Reboot system until it booted normally.
Click to expand...
Click to collapse
I fixed it I think it's because of a theme I applied
I successfully installed a Custom ROM called pixel plus ui android 12 in redmi 9. then i noticed a bug that few minutes later my device gets into a state that looks it turned OFF automatically . But it's not OFF then i have to use manual reboot to turn it on...................Any solutions????Thanks Advance.
I don't know if there's a fix for that
It was still happening in Ppui android 11 roms
Help I have the bootloader unlocked but still can't seem to install twrp it's been a while since I've rooted a phone I need a step by step ..kingroot and others don't work
Please elaborate, What happens when fastboot flash recovery TWRP.img?
jjgvv said:
Please elaborate, What happens when fastboot flash recovery TWRP.img?
Click to expand...
Click to collapse
I can't seem to get the flash
I need a really good detailed step by step how to do it
Drc123 said:
I need a really good detailed step by step how to do it
Click to expand...
Click to collapse
That answer isn't going to get you anywhere. Before you ask someone to write YOU a really detailed walkthrough because YOU aren't willing to search . . . How about you lay out exactly what you've done and exactly what's happening when you try to boot?
The first one to answwer your Q was helping you, in that they wondered what happens when you run that command through FASTBOOT. That is the exact command you would run to flash your TWRP.img
So . . .
Globalrebel said:
The first one to answwer your Q was helping you, in that they wondered what happens when you run that command through ADB. That is the exact command you would run to flash your TWRP.img
So . . .
Click to expand...
Click to collapse
fastboot
Fixed (But as an aside: isn't the command Fastboot, but the shell ADB?I haven't looked it all up in a while.
flashing twrp it says invalid partition name recovery failed
To let everyone know you cannot install twrp you can only do a boot to it through fastboot. they have it security blocked on the z3 play so it cant be installed yet. but if you do want a differnt recovery for it use magisk i have it installed on mine and it works great.
paulhauth25 said:
To let everyone know you cannot install twrp you can only do a boot to it through fastboot. they have it security blocked on the z3 play so it cant be installed yet. but if you do want a differnt recovery for it use magisk i have it installed on mine and it works great.
Click to expand...
Click to collapse
So question, I'm currently trying to boot into TWRP, however when I send the command "./fastboot boot twrp-3.5.0_9-0-beckham.img" it basically just sits there, it says sending boot.img but nothing happens. I've let it sit there for a while and nothing still. thanks
UPDATE: used a different computer and it worked perfectly my guess the USB port had some issue
manuss said:
So question, I'm currently trying to boot into TWRP, however when I send the command "./fastboot boot twrp-3.5.0_9-0-beckham.img" it basically just sits there, it says sending boot.img but nothing happens. I've let it sit there for a while and nothing still. thanks
UPDATE: used a different computer and it worked perfectly my guess the USB port had some issue
Click to expand...
Click to collapse
Yeah that would have a lot to do with the issues that you were having I have been using a usb 3.0 port on a laptop and haven't seen any issues with it. Also I have installed the new ASOP Pixelrom and is a awsome rom if i were you i would give it a try.
paulhauth25 said:
Yeah that would have a lot to do with the issues that you were having I have been using a usb 3.0 port on a laptop and haven't seen any issues with it. Also I have installed the new ASOP Pixelrom and is a awsome rom if i were you i would give it a try.
Click to expand...
Click to collapse
Running it now, so far it's brought that phone back to life, I was in the process of trying to install it when I posted yesterday lol.
Anyone here that is running a custom rom wanting a custom boot logo let know I'm gonna attempt to make some and I am looking for some ideas. also to let everyone know the custom logo gets rid of the pesky boot locked screen.
paulhauth25 said:
To let everyone know you cannot install twrp you can only do a boot to it through fastboot. they have it security blocked on the z3 play so it cant be installed yet. but if you do want a differnt recovery for it use magisk i have it installed on mine and it works great.
Click to expand...
Click to collapse
You cant flash recovery on Z3 not just because of security but there's no recovery partition.
paulhauth25 said:
To let everyone know you cannot install twrp you can only do a boot to it through fastboot. they have it security blocked on the z3 play so it cant be installed yet. but if you do want a differnt recovery for it use magisk i have it installed on mine and it works great.
Click to expand...
Click to collapse
how can i install the same custom recovery as you?
weldersb said:
how can i install the same custom recovery as you?
Click to expand...
Click to collapse
You side install it with twrp boot