Hello
Unable to flash magisk with any gsi img file. I transfer the img to Android device and with the latest magisk 24.1. I patch to file, but fails on each img which so far has been.
Pixel Experience
ProtonAOSP
Dot OS
AOSP
ProtonAOSP
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
No TWRP on any of the devices that want to install Magisk.
The error is Unsupported/Unknown Image format.
thanks
Related
I don't know if boot.img is same for oxygen and hydrogen OS. But if its different than u can root Hydrogen OS with this method.
What I Did :-
I Flashed Hydrogen OS Just To See The Difference B/w Oxygen And Hydrogen
Than Updated To Hydrogen OS 9.5.3.GM21 And Saved Full Zip.
Extracted payload.bin Using payload_dumper.
Copied boot.img To Mobile And Patched It With Magisk.
So What U Have To Do To Root Hydrogen OS 9.5.3 :-
1:- Download Patched Boot Image From Here
2:- Use This Command To Boot Into patched boot
fastboot boot magiskpatchedhydrogen.img
Click to expand...
Click to collapse
(U Can Rename The Image And Use That Instead)
Remember Don't Flash This Image Otherwise Safety Net Check Will Not Pass. But Yes Everything Else Will Work Fine
3:-Now It'll Boot Into System. Now Goto Magisk And Install Magisk Again By Clicking Direct Install.
That's It. Now U Can Install EdXposed. For Instructions See This Thread Here
Hi I Have .img files of precompiled oxygen 10.3.7 OSs that I want to share.
I use a dual boot from Orangefox
The actual firmware came from Oneplus.com
I also used Smurf kernel and xXx NoLimits ☆ for OnePlus
Installation is easy
1. Boot into a twrp
2. Flash Orangefox dual boot (partition I used is a-96gb b-96gb with a C-of 32gb.
3. Flash the .img files to the correct Partitions.
4. Flash orangefox twrp agian updating the filesystem to how you programmed it
5. Enjoy I also recommend updating magisk.
I'll be posting more quick image files of precompiled OSs soon. Mainly off original Oxygen 10.3.7.
Let know if theirs anything to fix or build. This is a quick way to not have to switch slots and get an OS on your phone.
https://mega.nz/folder/qno2HCQa#i9lYlnSOyj7RZe2kNDBCNA
also if you setup Your OS how you want it and make a twrp backup of the data. than you can do the above procedure and also restore your setting and hooks after.
Can You please explain what exactly it is?
spheady said:
Hi I Have .img files of precompiled oxygen 10.3.7 OSs that I want to share.
I use a dual boot from Orangefox
The actual firmware came from Oneplus.com
I also used Smurf kernel and xXx NoLimits ☆ for OnePlus
Installation is easy
1. Boot into a twrp
2. Flash Orangefox dual boot (partition I used is a-96gb b-96gb with a C-of 32gb.
3. Flash the .img files to the correct Partitions.
4. Flash orangefox twrp agian updating the filesystem to how you programmed it
5. Enjoy I also recommend updating magisk.
I'll be posting more quick image files of precompiled OSs soon. Mainly off original Oxygen 10.3.7.
Let know if theirs anything to fix or build. This is a quick way to not have to switch slots and get an OS on your phone.
https://mega.nz/folder/qno2HCQa#i9lYlnSOyj7RZe2kNDBCNA
also if you setup Your OS how you want it and make a twrp backup of the data. than you can do the above procedure and also restore your setting and hooks after.
Click to expand...
Click to collapse
Sorry I the project was not what I expected. Mainly going to make a fastboot installer pakackage for 10.3.7 and another flasher package for if I scew up and get stuck on my bootloader, with the files. I am not able to setup a PC for long right now so it would be wise. The smali thing turned out not working. The twrp can install into The New beta 11 that people are trying to root with boot.img's on another post
REQUIRED CONDITION: YOUR PHONE MUST SUPPORT Project Treble
(if you don't know if your phone supports project treble , download Treble Check on Play Market)
i installed android 12 gsi on my A70 (a70q)
1) download GSI https://developer.android.com/topic/generic-system-image/releases, choose the version you need (gms-google services)
2)open your .zip archive и extract the file system.img to your SD card
3)download permissiver_v5.zip https://androidfilehost.com/?fid=6006931924117940902, and copy to SD card
4)reboot your phone in download mode
5)flash twrp and vbmeta via odin(bootloader must be unlocked)
6)reboot to recovery twrp
7)on twrp- wipe->advanced wipe->select Dalvik, Cache, System, Data
8)install-select storage(your sd)->install image (select system.img) and swipe
9)reboot-power off
10)boot in twrp
11)mount-select Vendor
12)advanced-file manager->vendor/overlay and select delete this folder
13)install-permissiver_v5.zip
14)reboot system
hello, I wanted to know if the fingerprint works when installing android 12, the truth is that I am interested in installing android 12 gsi I have a samsung A70MN
Its working
Disclaimer:
volte won't work
You know, unfortunately, some websites and applications do not work in lineageos 18.1, today I will tell you the solution of this error.
first we need certain files they are boot image and vendor image you can download from the link below
Files:
Crdroid vendor
Boot.img
How to install:
first we go to twrp, click install and print img from the bottom, then we flash the boot.img file
then we flash the crdroid vendor file and finish it
and reboot enjoy
if it doesn't work clear app data
kozlu14 said:
Disclaimer:
volte won't work
You know, unfortunately, some websites and applications do not work in lineageos 18.1, today I will tell you the solution of this error.
first we need certain files they are boot image and vendor image you can download from the link below
Files:
Crdroid vendor
Boot.img
How to install:
first we go to twrp, click install and print img from the bottom, then we flash the boot.img file
then we flash the crdroid vendor file and finish it
and reboot enjoy
if it doesn't work clear app data
Click to expand...
Click to collapse
thanks buddy
Hi guys,
I'm trying to install Magisk v25.2 on my old Google Pixel (sailfish) that's on the latest Android 10 stock ROM. My bootloader is unlocked, and I tried to install TWRP unsuccessfully, and then I read that the new Magisk v25.2 can be installed directly from the app. Is that true? If so, how?
Thanks.
Well, you should follow this tutorial right here: https://topjohnwu.github.io/Magisk/install.html
The "complicated" part is getting an image file you need from your device. For example, on my phone, the OP6 I have two possibilities: I need the boot partition, so I can do two things. Either extract the latest version of the ROM I'll be using and extract the payload.bin using a program to get the boot.img, or, through some CLI magic, I can boot TWRP and inside of its terminal get the boot image file right from the currently installed system using `dd`.
All of this depends on your device and what the Magisk app initially reports to you.