I am from South Africa and for a living i do IT i drive fait 500x with 6.5 uconnect botched update now radio is stuck in boot loop looking for help as update failed and said i need RW version firmware and not EU.
Also need help to get google working on Huawei phone
Thanks all
Related
where i can find this firmare 21.11.22.titan_retla.retla.en.01 iusmx? i flashed with USA version but a i don have service on the cel.
nomo2008 said:
where i can find this firmare 21.11.22.titan_retla.retla.en.01 iusmx? i flashed with USA version but a i don have service on the cel.
Click to expand...
Click to collapse
i have the same problem, unlocked bootloader, flAshed Kitkat XT1063 global single sim version on fastboot then upgraded to Lollipop global single sim also, everything worked but the "no network" and an error when searching for one. i have downgraded to stock Kitkat, relocked bootloader, still no network service... any help on fixing that?
You can try the Retail Latin America version:
i Suggest this two (if the first doesn't work, try whit the second):
First: http://www.filefactory.com/file/6967yytqrjv3/RETLA_XT1063_4.4.4_KXB21.85-22_cid12_CFC_SVC.xml.zip
Second: http://www.filefactory.com/file/4q2qr0gw8trj/RETLA_XT1063_4.4.4_KXB21.85-14_cid12_CFC_SVC.xml.zip
Tell me how goes you whit this.
Glad I waited before flashing any stock rom. I just got the same phone, just from Telcel. Hope to have some secure way to flash lollipop soon.
i flashed mine succesully but softbricked it while downgrading because i had no network, after some research i got lollipop working again, you just have to flash the Latin american modems from the correct firmware for your phone, mine was retail latin america single sim, thats how you get a perfect working moto g 5.0 in mexico, ill provide the link if asked for
Please do.
[/COLOR]Hasta abajo de este tutorial viene el link del modem.
Saludos.
https://getmovil.com/motorola/root-moto-g-2014-android-lollipop/
Hello , I'm from Brazil so I apologize for bad English, I was in official soak test was 5.1 and install the final version of 5.1 that came out here in Brazil , only this procedure gave error and my phone is stuck in fastboot mode, tried downgrade but my cell phone was not unlocked bootloader , the system recovery eventually version, and when I try to reinstall or spend ZIP OTA he ends up giving error , in short, someone got there the version of recovey 23.32-14 on img or can extract it? I am in need of urgent help if will not have to take it in technical assistance .
Hi,
Can you help me with a stock p9 plus firmware VIE-09 that contains system.img, boot. img...etc. I need to install a firmware from fastboot.
I tried to install twrp after I unlocked my phone, it doesn't work. So I am stuck right now.
Thanks
Hello all,
Recently purchased a P9 Plus with this firmware loaded (VIE-AL10C00B390). Having trouble with all the preloaded chinese settings and not being able to use google apps. Also, unable to find a global firmware for VIE-AL10. Any help would be greatly appreciated
thequez said:
Hello all,
Recently purchased a P9 Plus with this firmware loaded (VIE-AL10C00B390). Having trouble with all the preloaded chinese settings and not being able to use google apps. Also, unable to find a global firmware for VIE-AL10. Any help would be greatly appreciated
Click to expand...
Click to collapse
here maybe!
hello everybody
i have a canadian p20 pro, i debrand it to c432 hw europe
all is good
my phone find 9.0 update, i do it but when i start my phone , french simcard is not detected.
i can do anything , i just can restore it to previous version 8.1 only when i put canadian simcard
when i go back 8.1 french simcard is ok
what happen please ?
problem with version ? problem with sim activation ?
very Strange problem….
thanks a lot for your help
Hi guys,
I'm thinking about change my Note 9 (Brazilian version) firmware for a non carrier branded firmware in order to get rid of the carrier's bloatwares and also to get more often and recent updates.
Currently my device is running the following configuration: Current Version (when I try OTA update) N9600ZHS1ASB2/N9600OWA1ARK1/N9600ZCU1ARK1, Baseband N9600ZCU1ARK1, Build Number M1AJQ.N9600ZHS1ASB2, Service Provider Sw ver SAOMC_SM-N9600_OWA_ZTA_00_0025 ZTA/ZTA, ZTA/ZTA.
I've noticed at Sammobile that the Brazilian not carrier branded version of Android 9 Pie was just released two days ago.
As I run every one of my devices in English, the language of the firmware doesn't matter to much.
I would like to know what firmware versions I can put on my device without messing with the Knox "fuse". Can the ZTO version available in Sammobile be flashed on my device without any problems with Knox?
There are any other country firmware that I can flash on my device without messing with Knox and that could bring me OTA updates more often and in a more timely manner?
If any of the above mentioned options is viable, can someone help me with flashing in order to me get it done right? I already used Odin in the past, so, I think that just a brief explanation of what files are needed and if exists some kind of think that I need to pay special attention on the process (for example, found somewhere on internet someone that says that there are differences is the device is wiped or factory reseted after the update or not).
I really appreciate if someone could help me.
athanazio said:
Hi guys,
I'm thinking about change my Note 9 (Brazilian version) firmware for a non carrier branded firmware in order to get rid of the carrier's bloatwares and also to get more often and recent updates.
Currently my device is running the following configuration: Current Version (when I try OTA update) N9600ZHS1ASB2/N9600OWA1ARK1/N9600ZCU1ARK1, Baseband N9600ZCU1ARK1, Build Number M1AJQ.N9600ZHS1ASB2, Service Provider Sw ver SAOMC_SM-N9600_OWA_ZTA_00_0025 ZTA/ZTA, ZTA/ZTA.
I've noticed at Sammobile that the Brazilian not carrier branded version of Android 9 Pie was just released two days ago.
As I run every one of my devices in English, the language of the firmware doesn't matter to much.
I would like to know what firmware versions I can put on my device without messing with the Knox "fuse". Can the ZTO version available in Sammobile be flashed on my device without any problems with Knox?
There are any other country firmware that I can flash on my device without messing with Knox and that could bring me OTA updates more often and in a more timely manner?
If any of the above mentioned options is viable, can someone help me with flashing in order to me get it done right? I already used Odin in the past, so, I think that just a brief explanation of what files are needed and if exists some kind of think that I need to pay special attention on the process (for example, found somewhere on internet someone that says that there are differences is the device is wiped or factory reseted after the update or not).
I really appreciate if someone could help me.
Click to expand...
Click to collapse
Pode fazer que não dá problema nenhum em trocar pra ZTO.. lá no sammobile do lado direito da pagina de download da firmware, tem os passo a passo do Odin.
athanazio said:
Hi guys,
I'm thinking about change my Note 9 (Brazilian version) firmware for a non carrier branded firmware in order to get rid of the carrier's bloatwares and also to get more often and recent updates.
Currently my device is running the following configuration: Current Version (when I try OTA update) N9600ZHS1ASB2/N9600OWA1ARK1/N9600ZCU1ARK1, Baseband N9600ZCU1ARK1, Build Number M1AJQ.N9600ZHS1ASB2, Service Provider Sw ver SAOMC_SM-N9600_OWA_ZTA_00_0025 ZTA/ZTA, ZTA/ZTA.
I've noticed at Sammobile that the Brazilian not carrier branded version of Android 9 Pie was just released two days ago.
As I run every one of my devices in English, the language of the firmware doesn't matter to much.
I would like to know what firmware versions I can put on my device without messing with the Knox "fuse". Can the ZTO version available in Sammobile be flashed on my device without any problems with Knox?
There are any other country firmware that I can flash on my device without messing with Knox and that could bring me OTA updates more often and in a more timely manner?
If any of the above mentioned options is viable, can someone help me with flashing in order to me get it done right? I already used Odin in the past, so, I think that just a brief explanation of what files are needed and if exists some kind of think that I need to pay special attention on the process (for example, found somewhere on internet someone that says that there are differences is the device is wiped or factory reseted after the update or not).
I really appreciate if someone could help me.
Click to expand...
Click to collapse
I´m Brazilian too...
You can install Pie rom ZTO from sammobile using HOME_CSC if you dont want to loose your files, but I never use HOME_CSC when I change to another Android version...
You will not to loose nothing.