Hi,
My brother and his wife share the same house phone number.
When I call my brother, the phone shows her contact information.
The same happens to other contacts. When I call my wife at home, my contact info shows up during the "call".
People with the same phone numner:
Jan Nissens
Nadine Van den Abbeele
Tom Nissens
Yasmine Nissens
With default Dialer from TyTN II:
When I call Jan at home, it dials Tom
When I call Nadine at home, it dials Tom
When I call Yasmine at home, it dials Tom
When I call Tom at home, it dials Tom
Doe someone else experience this?
Or even better: who has the solution to this problem?
Patrick
You have stored the same nr. on youre brother and hes wife, you need to change what is the main nr. Like now its the house nr. So when you call youre brother, he got the same nr. as youre brothers wife.
Give the troubled contact order to call cell nr. as default instead.
I don't understand your solution. Can you be more specific?
Patrick
nissensp said:
I don't understand your solution. Can you be more specific?
Patrick
Click to expand...
Click to collapse
You have saved more than one contact on the same phone number. When you want to dial one of them the other shows as contact as they share the same number.
Indeed, that is the problem. And do you have a solution?
Patrick
he already stated his solution
you have x listed as same number as home
you need to make y the same number but not save it as their home number.
two diff contacts, same number, save one as home and the other contact as something else like "pager, work2, etc...
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
nissensp said:
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
Click to expand...
Click to collapse
SPB are the ones you want to ask to improve the interface if the solution works normally as stated with WM, to be honest i would just put a contact as say Mat & Shaz if they lived together or as you have since my brain would communicate to me and say they live together and i know who i'm calling...
Merging them into 1 contact isn't a good idea:
- I can't store the birthday for each of the contacts
- They have 2 kids, so there is a total of 4 persons with 1 home phone number
- I want to be able to know who i called before (I tap on the corresponding person to call the home number).
Patrick
nissensp said:
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
Click to expand...
Click to collapse
They are not going to adapt to SPB Anyways, make contacts like this then:
Wife Home, Wife Work, Brother Home, Brother Work. Yeah you will have more contacts instead of all numbers in one, but you will not have problem calling them.
nissensp said:
Or even better: who has the solution to this problem?
Click to expand...
Click to collapse
Given that HTCs default Sim Manager/Contacts program automatically labels all of my imported from the SIM phone numbers, as Cell Phone numbers (even landline ones) and there seems to be no way to correct this during a batch import (I'm not going to go in and edit each one), I'd have little faith in a software solution but you could dictate to your friends that they all install multiple numbers at their homes and have them individually assigned for your ease of identification
Seriously though, if you want them still to be friends, there's no simple way to get around this problem as the Caller ID information that comes into your phone specifies a phone number and that number is tied to a contact (or several in your case). How is the phone to know which contact is on the other end of the phoneline actually making the call? HTC hasn't developed a crystal ball plugin
@Flying Kiwi
I'm not referring to incoming calls, but to outgoing calls.
Patrick
HTC bugs
nissensp said:
@Flying Kiwi
I'm not referring to incoming calls, but to outgoing calls.
Click to expand...
Click to collapse
Sorry for misunderstanding you. Although your post is titled with 'calling', I just couldn't see where the real problem lay as you already know who you're calling because you looked it up in your contacts and tapped it. Although another name may subsequently be displayed on the phone, that's one of the problems with HTCs software (along with incorrectly assuming all imported sim contacts are cell phone numbers). Short of re-writing that code yourself, I know of no way to fix it. You'll be better off keeping all your birthdates and 'finer details' elsewhere IMO. Personally, although I dabbled in using the 'onboard' contacts, I now only use sim contacts.
The other people who have posted here look to have provided plenty of workarounds but it's HTC (or spb) that would need to fix the software to get things exactly how you want it. I suggest that you report this to them and see what they have to say about it.
I have a fix for this; hopefully this will work in your country too.
For my sister I store the home number as 0123456789p1
For my brother-in-law I store the number as 0123456789p2
The "p" tells the dialer to pause and this is then treated like a different number. the number after the "p" is (in the UK) ignored and so can be any number you like.
Unfortunately, on my TyTN II it doesn't work.
My wife and myself have the same home phone number. I added "p1" to my home number and "p2" to my wife's.
But when I call my wife at home, it still shows my contact while dialing!
I also softreset the TyTN II, but it didn't work.
That's sad, and it means it's HTC which cannot handle "p1" and "p2".
Patrick
Workaround works for me
nissensp said:
Unfortunately, on my TyTN II it doesn't work.
My wife and myself have the same home phone number. I added "p1" to my home number and "p2" to my wife's.
Click to expand...
Click to collapse
Did you add the p1 or p2 etc at the end of the number? I tried this on mine and it worked perfectly. Yes the HTC software has its bugs but this seems to be a good workaround as long as your network copes with the p1 etc. If it's dialling out ok then that's a very good sign. Perhaps your ROM may have different abilities but my standard setup copes with the rjcb23 workaround perfectly - just a shame I have no need to use it!
I managed to find another trick.
I replaced p1 and p2 into #1 and #2
A big thank you to rjcb23 for giving the hint for adding p1 and p2!
Patrick
hi, I am using cm-10.0 with my Samsung Galaxy i9000. I am living outside my home country, so I use Skype for all international call back home country and normal phone call to local numbers.
I know, there is option to make phone or Skype as default call handler. but what I need is when I call international number, Skype should handle it and when I make a local call my phone should handle it. I know, its difficult, but is there any way or app which will let me do this. currently when I get a call from home and i need to make international calls I open skype and make a call. but if somehow I get this going I can just reply it back from log and Skype will take it.
Use Case:
1. Call a conference call number eg: WebEx
2. You are asked to enter the meeting number
3. You press the numbers but no tones are played
Had a tech support call with Samsung just now.
Firstly they say this isn't a feature on EU Note 8s (WTF!)
Then say it should work out of the box and my phone is faulty so take it to a Samsung centre for evaluation / exchange
I reckon this is a software bug. Can someone else in the EU dial any number and when you're connected to the call, press a number on the dial pad and tell me if you hear the tone played?
Im not in EU, but in the states it works fine, i have many conference calls daily and it always works for me entering my codes to get into the call. It should be working fine on your model as well, possible a issue with the carrier side of things or its turned off in the hidden settings.
Edit:
Try ##DATA#, if it brings up a menu, put in 000000 as your msl, then go to More, then go to DTMF SET. See if its off or not set at all? US model has a option here for this at least.
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
joebongo said:
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
Click to expand...
Click to collapse
I have a Galaxy N950N and I have this same issue. Did you ever get this working? I can't seem to find a secret service menu to enable it, and I know I'm doing something wrong here.
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
joebongo said:
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
Click to expand...
Click to collapse
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
ajm786 said:
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
Click to expand...
Click to collapse
Figured it out. It's the CSC. Apparently, it doesn't work properly with the N950N (at the least the one I had installed, which was default with the Renovate ROM). I had to use the Flashable CSC Selection V1.2.5 from Tkkg1994, manually add the greatlte line into it, and once flashed, I got all the options in the dialer for TTY (I think which relates to DTMF), and most importantly, sound feedback when pressing the dialpad while in-call.
Solution
Go to settings -> sound and vibration -> uncheck the the dialling keypad tones(if checked).
Hope this helps!
this works. Go figure... you disable the dialling keypad tones and you can now use the keypad tones. Thanks for the help. This has infuriated me for months
I had not payed any attention to this, as I used some services that require you to input numeric options during call, and all worked fine, but, yes, no tones heard, but the tones are sent anyway
What worked for me was dialing the original number manually - not from the phone memory or contacts!
I use a Gigaset HC450 Doorbell that is able to divert a call.
This is a rare device, check ebay, it is a DECT phone on a Siemens Gigaset IP Base Station with a SIP provider configured)
So if someone presses the doorbell button on the Gigaset HC450 and status is set to AWAY
then the configured SIP provider inside the BASE station does an external call to my mobile because I set up my mobile number inside the HC450 Menu for Diversion
So my mobile is a Samsung Note 8, at the moment i run Stock Hungarian unbranded firmware N950F
When there is a call from the doorbell, there is a sentence said by a female voice: "Doorbell is ringing, to connect press 1, to stop press hash"
I cannot proceed by pressing 1, neither with Dialpad tones activated nor deactivated, and also a 3rd party DTMF tone generator does not work
Someone in this thread said it was fixed by flashing different CSC, which i think is not true because many said that they got webex fixed by simpy DEACTIVATING dialpad tones
I am greatful for all ideas that you have in order to get this working, its a new challange and I found this thread so I posted my topic here, too
Thank you very much for reading
Hello,
I'm using Samsung Note and Blackberry. It's so stupid. The dialer app did not show Contact's Company when i receive their incoming call. I got too many contact with same name but different company. I can not recognize anyone when i receive their call.
Please think about it. Please release a new application with that feature: Let user choose which contact information can be displayed when phone got incoming calls.
Many thanks.
LMAO. Really? Won't happen bud. Go download a different dialer app and contact app.bye.
Hello, does anyone have the call apk from a call record area? Israel, Indonesia etc.
Thank you.
Hello, just install Home CSC, which is from the same production number that you need to do.