Related
UPDATED: Updated V4A flash file to Viper4Android v2.4.0.1 and added notes about the TabS AOSP Marshmallow custom ROM compatibility by Schischu.
The obligatory warning:
"I take no responsibility for what happens to your device if you follow this guide. This procedure works with multiple Audio/Video apps. It should work for any Samsung device, but I can't confirm, so feedback please if it works for your device."
- 3DSammy
Root with SuperSU is required either using a standard rooting method that trips KNOX or following this guide "[GUIDE] How to root without tripping knox - Kitkat and Lollipop, Locked bootloader" by ashyx. Having SuperSU installed and functioning is essential to get around Viper4Android's need for SELinux permissive mode which is not possible when you are using the Samsung stock firmware.
As of June 8th maximumentropy posted a method to use SuperSU to work around Viper4Android's need for SELinux permissive mode. This requirement was problematic on Samsung devices where the SELinux mode changer app did not work with the Samsung stock firmware.
The instructions and flash files below will allow both custom ROM and rooted stock ROM devices to install Viper4Android, an amazing audio replacement.
Note: V4A and the included flash file works with the AOSP Marshmallow custom ROM compatibility by Schischu. Any of the SoundAlive comments below can be ignored for this custom ROM.
Steps:
1) Download the two flash files "ViPER4Android-supolicy.zip" and "LolliViPER_TAB_S.zip" (at the bottom of this post)
2) Flash ViPER4Android-supolicy.zip and LolliViPER_TAB_S.zip with FlashFire or a Custom Recovery (e.g. TWRP) of your choice.
3) If you want Spotify to work and maybe other audio/video apps then Samsung's "SoundAlive" must be removed or disabled. Options:
Backup then freeze or delete "SoundAlive 2.0" with Titanium Backup
Backup then delete the "/system/priv-app/SoundAlive_Tablet_20" directory with a File Manager that has RW "/system" privileges
Remove "SoundAlive" with an app like "System Remover app" found on the Playstore
4) Reboot your device and then start Viper4AndroidFX and install its drivers when prompted then reboot once more
5) Start the Viper4AndroidFX app and configure audio for the device speakers/headset/bluetooth as desired. Please refer to Viper4Android XDA forum for details about the extensive options.
NOTES:
Be aware that if you do not disable/remove SoundAlive then Spotify will disable V4A until the next device reboot. Causing confusion about whether V4A is actually working reliably. Other audio apps may also demonstrate this tendency.
If you check the V4A driver status and audio is not playing the status will show "Processing: No" that should change to "Yes" when audio is playing and V4A is working correctly.
A Rule-of-Thumb with V4A is to make sure to turn off any Audio/Video player app's specific equalizers, gain controls, audio effects, ... etc, as they interfere with Viper4Android. If you still cannot get Viper4Android working with a specific app, that's not listed in this thread, then search first then if necessary ask on the V4A's XDA forum.
So far the following Audio/Video apps have been successfully tested with V4A:
Neutron audio player (Settings and uncheck Equalizer;Sound Sound;DSP-Effects->Surround Sound;Relay Gain;Normalization)
MX Player Pro (Settings->Audio->Volume Boost unchecked)
Spotify (If it is working properly the Spotify->Settings->Equalizer will directly display the V4A app)
TuneIn Radio
Google Music Player
PowerAmp (PowerAmp Settings->Advanced->Uncheck everything)
YouTube
ViralPro (a YouTube alternative)
Apps that do not work with V4A (likely due to the removal of "SoundAlive"):
Samsung's "Music" app (still plays audio but not by utilizing V4A processing)
Please post any apps not mentioned here, which you either get working or that have problems with after checking the V4A XDA forum.
If you have SuperSU working and have never tried V4A do so and you ears with thank you!
Credits:
zhuhang: For developing Viper4Android in the first place
Chainfire: For developing SuperSu and FlashFire
ashyx: For providing the "How to root without tripping knox - Kitkat and Lollipop, Locked bootloader" guide
maximumentropy: For posting the method and flash file to work around V4A's need for SELinux
AndrasLOHF: Who's post is where I grabbed the original V4A install script.
Schischu: For AOSP Marshmallow custom ROM
Zip file(s):
V4A install for a Tab S
Thanks worked like a charm. Been trying to figure it out for about a week
+1! Stable viper performance with LP, great sound, thank you so much!
Best, maris
Thanks man, It works like a champ and beats my Bose speakers same as S6
Brilliant job mate...
PS. I spent almost a week to switch between KK snd LP. Even S6 was easies with V4A
Worked great. Thanks
works great on my sm-T700 thanks..
Works great on my MOAR S5
will try on the tab s t705c.
3DSammy said:
Flash ViPER4Android-supolicy.zip and LolliViPER_TAB_S.zip
Click to expand...
Click to collapse
Hi and thanks a lot for helping others out with the notoriously difficult to install viper app.
I presume the supolicy zip is intended as an alternative to setting selinux permissive. Any negatives to using one method over the other?
Also, can you please explain what your application zip does exactly. Does it just install the original viper as a system application or did you make any other modifications?
Thanks!
schiphol said:
Hi and thanks a lot for helping others out with the notoriously difficult to install viper app.
I presume the supolicy zip is intended as an alternative to setting selinux permissive. Any negatives to using one method over the other?
Also, can you please explain what your application zip does exactly. Does it just install the original viper as a system application or did you make any other modifications?
Thanks!
Click to expand...
Click to collapse
Either method of getting V4A permissive mode will work but if you rooted and maintained KNOX the stock bootloader blocks SELinux from setting permissive mode so the supolicy is your only alternative. Besides I read a comment from Chainfire who indicates that using permissive mode system wide is poor security practice. On my Nexus 5 which is running marshmallow I found all I needed was two supolicies to get all my root apps running and they were for V4A and stickmount.
The supplied V4A flash file installs V4A in /system/priv-app, sets permissions and attempts to delete two apps that the stock Samsung firmware does not have. Those audio apps are in the Google stock firmware and do no harm as there is nothing to delete. The flash file is based off one for V4A on a Nexus 5. I choose to not delete the Samsung audio app as some people may want to back it up, besides I documented three ways to deal with that app.
I hope you enjoy V4A.
Sent from my SM-T800 using XDA Premium HD app
Dr.Ketan V4A fix for stock touchwiz android 5.0.2 work like a charm on my Tab S T705
Simple as install normal apk, one tap. Done. Here http://forum.xda-developers.com/showpost.php?p=61858278&postcount=3079
This thread is impressive it work !!!!
Thanks. Tried this on my tab S. Works.
RocketPlayer is another music app that works with V4A.
Wow, I wish I had seen this thread sooner. Maybe I can fix the sucky Bluetooth performance in my tab now! Can't wait to try it. Thanks!
Working perfectly in Galaxy Alpha (g850m - Exynos) with enabled root and native kernel, including the Mix Radio (without special settings).
Thank you so much you saved my travels to work !!!
Does V4A not work on KitKat? I decided to downgrade back to KitKat but can't get it to work.
noxarcana said:
Does V4A not work on KitKat? I decided to downgrade back to KitKat but can't get it to work.
Click to expand...
Click to collapse
Yes the app works on KitKat but the directory structure for apps on /system changed. I'd suggest going to the ViPER4Android XDA forum and searching for KitKat installs. That forum link is in the OP (first post).
Sent from my SM-T800 using XDA Premium HD app
3DSammy said:
Yes the app works on KitKat but the directory structure for apps on /system changed. I'd suggest going to the ViPER4Android XDA forum and searching for KitKat installs. That forum link is in the OP (first post).
Sent from my SM-T800 using XDA Premium HD app
Click to expand...
Click to collapse
Ok. Thanks for the reply!
Edit: So, I was't able to find anything there about Kitkat specific installation, but I did find someone that help me figure out what my issue was.
Wow.. Excellent its working on my samung J2 J200F
Very very thanks 3DSammy, I rooted my new samsung j2 only for viper4adroid and I tried a lot and failed and many times ended in boot loop but this time Great Success, Its working fine on Stock Rom with TWRP recovery. But its only working perfect in compatible mode only (normal mode just work for some seconds only then processing stopped) but no problem I am happy .
Apps locking usage based on Root Check
Hello people,
I've got an app ( https://play.google.com/store/apps/details?id=pt.viaverde.clientes ) that is making a root check, and therefore blocking usage based on that. (wich is even more stupid based on the app functionality - check tolls registry)
With Magisk Hide had no luck.
Any other ideas to block or hide root checking by an App ?
thanks
No issues opening it... Did you repackage the Manager with a random name?
More tips:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Didgeridoohan said:
No issues opening it... Did you repackage the Manager with a random name?
More tips:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Click to expand...
Click to collapse
Worked perfect ! Thanks a lot
Hey there,
I hope you're doing well.
I recently updated from One Ui 3.0 to One Ui 3.1 (Android 11) (Note10+ N975F Exynos). But this time I had to install clean because dirty flash didn't worked this time.
Set up everything as before but with the problem that my Banking App and photoTan detects root (FC). Same Version as before, same settings. Magisk hide, tried freezing some root apps and Magisk Canary with latest app too. Still the App detects root. I also tried to delete everything on my storage with magisk in the name.
And also as always gave Magisk another name (hide app itself)..
(Font Changer module doesn't work either with v22.0 Magisk)
I already spent several hours fixing it.. I'm really frustrated right now.
I would really appreciate any tipp..
Update was definitely not worth it.
Can someone please test the Commerzbank App and photoTan if it force closes with Magisk Hide on v22.0?
Edit: I tried Mandiri App just for Fun because for many people the app doesn't work with root, just tried once without magisk hide and didn't work. With hide it worked, just my banking apps are smarter I assume.
Greets
TheFerhatKing
TheFerhatKing said:
Hey there,
I hope you're doing well.
I recently updated from One Ui 3.0 to One Ui 3.1 (Android 11) (Note10+ N975F Exynos). But this time I had to install clean because dirty flash didn't worked this time.
Set up everything as before but with the problem that my Banking App and photoTan detects root (FC). Same Version as before, same settings. Magisk hide, tried freezing some root apps and Magisk Canary with latest app too. Still the App detects root. I also tried to delete everything on my storage with magisk in the name.
And also as always gave Magisk another name (hide app itself)..
(Font Changer module doesn't work either with v22.0 Magisk)
I already spent several hours fixing it.. I'm really frustrated right now.
I would really appreciate any tipp..
Update was definitely not worth it.
Can someone please test the Commerzbank App and photoTan if it force closes with Magisk Hide on v22.0?
Edit: I tried Mandiri App just for Fun because for many people the app doesn't work with root, just tried once without magisk hide and didn't work. With hide it worked, just my banking apps are smarter I assume.
Greets
TheFerhatKing
Click to expand...
Click to collapse
Maybe there was an update of the banking app with better detection of hidden rooting
BTW ... I am on stock (unrooted) OneUI 3.1 and Commerzbank / photoTAN app working fine.
It_ler said:
Maybe there was an update of the banking app with better detection of hidden rooting
BTW ... I am on stock (unrooted) OneUI 3.1 and Commerzbank / photoTAN app working fine.
Click to expand...
Click to collapse
That doesn't make sense for me.. because one day before with One Ui 3.0 it worked perfectly with the same (!) version of both apps.
Would be anyone so nice to give it a shot on his Magisk rooted phone?
It's https://play.google.com/store/apps/details?id=com.commerzbank.photoTAN
and
Commerzbank Banking - Apps on Google Play
Banking is quick and easy with the Commerzbank Banking app
play.google.com
TheFerhatKing said:
Would be anyone so nice to give it a shot on his Magisk rooted phone?
It's https://play.google.com/store/apps/details?id=com.commerzbank.photoTAN
and
Commerzbank Banking - Apps on Google Play
Banking is quick and easy with the Commerzbank Banking app
play.google.com
Click to expand...
Click to collapse
Well, I'm not a customer so I can't get very far, but no problem opening the app up to the point where you're supposed to scan the activation letter. I'm assuming root is detected after that, since I hadn't even added the app to the Hide list...
Didgeridoohan said:
Well, I'm not a customer so I can't get very far, but no problem opening the app up to the point where you're supposed to scan the activation letter. I'm assuming root is detected after that, since I hadn't even added the app to the Hide list...
Click to expand...
Click to collapse
The photoTan App doesn't even let me scan something, it closes directly. Even if it's hidden. I'm assuming its ROM related and I think what's causing it is the safetynet fix thats integrated.
Thank you very much for testing!
@TheFerhatKing I am able to run the Commerzbank-Banking app in an older version, with magisk v23 on a rooted, unlocked Xiaomi mi 9t aka davinci. I am using the MicroG LOS rom.
12.9.4 is working nice, later versions show me that I used root and I had the retriction that I was not able to use fingerprint for unlock. You can get the older apk here: https://apkcombo.com/de-de/commerzbank-banking-the-app-at-your-side/de.commerzbanking.mobil/download/phone-12.9.4 (210226022)-apk
And you need this module too:
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
Plus hide the root from magisk settings.
I_did_it_just_tmrrow said:
@TheFerhatKing I am able to run the Commerzbank-Banking app in an older version, with magisk v23 on a rooted, unlocked Xiaomi mi 9t aka davinci. I am using the MicroG LOS rom.
12.9.4 is working nice, later versions show me that I used root and I had the retriction that I was not able to use fingerprint for unlock. You can get the older apk here: https://apkcombo.com/de-de/commerzbank-banking-the-app-at-your-side/de.commerzbanking.mobil/download/phone-12.9.4 (210226022)-apk
And you need this module too:
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
Plus hide the root from magisk settings.
Click to expand...
Click to collapse
Thanks mate, but the Commerzbank Banking App works. The phototan app isn't working, only a very old one from years ago works.
TheFerhatKing said:
Thanks mate, but the Commerzbank Banking App works. The phototan app isn't working, only a very old one from years ago works.
Click to expand...
Click to collapse
I did a test for you and add the new installed phototan app to my bank-account. Works nice.
Don't forget:
-Install https://github.com/kdrag0n/safetynet-fix/releases
-hide root for the app
Testet with:
-Magisk v23
-installed https://github.com/kdrag0n/safetynet-fix/releases
-Xiaomi mi 9t - davinci
-LOS MicroG Rom
-app: 12.9.4 - de.commerzbanking.mobil
I_did_it_just_tmrrow said:
I did a test for you and add the new installed phototan app to my bank-account. Works nice.
Don't forget:
-Install https://github.com/kdrag0n/safetynet-fix/releases
-hide root for the app
Testet with:
-Magisk v23
-installed https://github.com/kdrag0n/safetynet-fix/releases
-Xiaomi mi 9t - davinci
-LOS MicroG Rom
-app: 12.9.4 - de.commerzbanking.mobil
Click to expand...
Click to collapse
Both apps are already hidden, the ROM is prepatched with SafetyNet Fix so everything green. Also Magisk v23 Stable.
Recent Banking App doesn't show rooted anymore but Phototan still force closing for me.
You should try an older version. Force closing could be same problem some users report on google-Playstore.
Look at apkcombo to grab an older version.
TheFerhatKing said:
Thanks mate, but the Commerzbank Banking App works. The phototan app isn't working, only a very old one from years ago works.
Click to expand...
Click to collapse
TheFerhatKing said:
Both apps are already hidden, the ROM is prepatched with SafetyNet Fix so everything green. Also Magisk v23 Stable.
Recent Banking App doesn't show rooted anymore but Phototan still force closing for me.
Click to expand...
Click to collapse
I_did_it_just_tmrrow said:
You should try an older version. Force closing could be same problem some users report on google-Playstore.
Look at apkcombo to grab an older version.
Click to expand...
Click to collapse
Have a look in this thread:
Comdirect photoTAN app detecting root
Since version 8.3.0 additional measures to detect root have been added, do not update as MagiskHide won't be able to prevent detection. Until a solution is found I would recommend staying on the previous version for as long as possible. Finding...
forum.xda-developers.com
I want one app to work in my rooted mobile but it detect my root and doesn't work I did try to hide every possible way I know but failed.
Is there anyone can help me hide the root plz or suggest me any other root to install thanks
App name is ARC8
App link
Arc8: The Addictive Arcade - Apps on Google Play
Play 1v1 multiplayer battles and earn rewards in 10+ amazing games
play.google.com
Magisk version 24.1
My mobile info
Samsung Note 20 Ultra
Model- N986B
Android Version 10
Plz help me hide the root for this app.
I will attach the file the interface it shows after opening the app
Magisk Hide has been deprecated for DenyList. Please refer to this thread.
Magisk 24.1 Zygisk + Lsposed 1.7.2, hiding this app also doesn't work for me on Samsung S7 9.0 Pie.
What could be the issue issue?
Any other root might work or not?
Beside magisk?
I did try EFTSU root but it didnt work.
Do u know anyone I can contact to fix my issue?
it also not working on my phone too. Can anyone help me?
yes I searched the whole internet i can't find an answer beside downgrade to magisk older versions
Did you have problems with some app that detects the root ?
Here is your place.
We will try to help you.
Keep attention, this is just a help thread, nothing is guaranteed.
Be patient and cordial.
If there is acceptance of the community on the subject, certainly the thread will grow.
Before posting your reply, please describe some questions:
- What is the version of Android ?
- What is the name of the app, the package of the app and where can we download the app ?
- When does exactly the app crash ?
- Are you using a custom/modded ROM or a stock ROM ?
- Which magisk modules are enabled ?
- Which xposed modules are enabled ?
Don't forget to attach some screenshots.
Some Useful Content For Bypassing Detections:
Shamiko:
https://github.com/LSPosed/LSPosed.github.io
DenylistUnmount:
https://github.com/mywalkb/DenylistUnmount
XPrivacyLua:
https://repo.xposed.info/module/eu.faircode.xlua
https://github.com/M66B/XPrivacyLua
https://forum.xda-developers.com/t/app-xposed-6-0-xprivacylua-android-privacy-manager.3730663/
Universal SafetyNet Fix:
https://github.com/kdrag0n/safetynet-fix
https://forum.xda-developers.com/t/magisk-module-universal-safetynet-fix-1-1-0.4217823/
InitRcHider
https://forum.xda-developers.com/t/module-initrchider.4369285/
Magisk Hide Props Config:
https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf
https://forum.xda-developers.com/t/...safetynet-prop-edits-and-more-v6-1-2.3789228/
Hide My Applist:
https://github.com/Dr-TSNG/Hide-My-Applist
RootCloak:
https://repo.xposed.info/module/com.devadvance.rootcloak
https://repo.xposed.info/module/com.devadvance.rootcloak2
https://github.com/devadvance/rootcloak
https://github.com/devadvance/rootcloakplus
https://forum.xda-developers.com/t/...e-root-from-specific-apps-2014-01-14.2574647/
MomoHider:
https://github.com/canyie/Riru-MomoHider
RiruUnshare:
https://github.com/vvb2060/riru-unshare
XPrivacy:
https://repo.xposed.info/module/biz.bokhorst.xprivacy
https://github.com/M66B/XPrivacy
https://forum.xda-developers.com/t/xprivacy-the-ultimate-yet-easy-to-use-privacy-manager.2320783/
Some Useful Content For Checking Detections:
VD Infos:
https://forum.xda-developers.com/t/VDInfos.4097379/
Momo:
https://t.me/magiskalpha/517
XposedDetector:
https://github.com/vvb2060/XposedDetector
MagiskDetector:
https://github.com/vvb2060/MagiskDetector
ApplistDetector:
https://github.com/Dr-TSNG/ApplistDetector
NativeDetector:
https://github.com/LSPosed/NativeDetector
YASNAC - SafetyNet Checker:
https://github.com/RikkaW/YASNAC/releases
Reserved.
It appears July patch defeated Magisk Deny List and USNF.
No Netflix install/update
No Wallet/Pay
mingkee said:
It appears July patch defeated Magisk Deny List and USNF.
No Netflix install/update
No Wallet/Pay
Click to expand...
Click to collapse
hi, good idea! So I use magisk 25.2, denylist, zygisk, shamiko.
i'm on LOS 19.1 on samsung galaxy tab a (sm-t 550). Hiding root works, but MOMo detects 'abnormal' circumstances (see attachment). Banking apps (S pushTan und VR securego crashes.
i renamed TWRP folder, Magisk and TitaniumBackup, freezed magisk app, I deactivated Developer options and debugging - guess I tried everything Didgeridoohan advices. cleared cache and data - the banking apps won't work. What can I do further?
abagm said:
hi, good idea! So I use magisk 25.2, denylist, zygisk, shamiko.
i'm on LOS 19.1 on samsung galaxy tab a (sm-t 550). Hiding root works, but MOMo detects 'abnormal' circumstances (see attachment). Banking apps (S pushTan und VR securego crashes.
i renamed TWRP folder, Magisk and TitaniumBackup, freezed magisk app, I deactivated Developer options and debugging - guess I tried everything Didgeridoohan advices. cleared cache and data - the banking apps won't work. What can I do further?
Click to expand...
Click to collapse
Try NOT to use Shamiko (crashes in some/many apps), try this for an alternative
Stillhard said:
Try NOT to use Shamiko (crashes in some/many apps), try this for an alternative
Click to expand...
Click to collapse
abagm said:
okay. did so, loaded initRcHider as well - no luck. Denylist seems working, Momo does not mention magisk or zygisk or lsposed. Maybe SELinux permissive is the culprit? Seems that banking apps have got too strict - LOS 17 and pure old magisk hide did the job. Broken TEE, Seccomp???
Click to expand...
Click to collapse
Custom ROMs will always shown as abnormal because they are abnormal.
If they were not abnormal, they could not work.
About seliux permissive, this will always be a big red alert.
Hi @VD171
Thanks for creating this thread!
Please keep up the good work
abagm said:
Seems that banking apps have got too strict
Click to expand...
Click to collapse
If banking app is too intrusive then you can simply access your online banking website through browser app and do your transactions from there
Browser app will never check if you got root or if your selinux is permissive or other things! Because it's none of its business!
lebigmac said:
Hi @VD171
Thanks for creating this thread!
Please keep up the good work
If banking app is too intrusive then you can simply access your online banking website through browser app and do your transactions from there
Browser app will never check if you got root or if your selinux is permissive or other things! Because it's none of its business!
Click to expand...
Click to collapse
lebigmac said:
Hi @VD171
Thanks for creating this thread!
Please keep up the good work
If banking app is too intrusive then you can simply access your online banking website through browser app and do your transactions from there
Browser app will never check if you got root or if your selinux is permissive or other things! Because it's none of its business!
Click to expand...
Click to collapse
You're right- I can access the online banking via browser. But to do transaction, I need apps - that's why I complain 🫠
VD171 said:
Custom ROMs will always shown as abnormal because they are abnormal.
If they were not abnormal, they could not work.
About seliux permissive, this will always be a big red alert.
Click to expand...
Click to collapse
lebigmac said:
Hi @VD171
Thanks for creating this thread!
Please keep up the good work
Click to expand...
Click to collapse
Thank you, sir. I will help always as I can
lebigmac said:
If banking app is too intrusive then you can simply access your online banking website through browser app and do your transactions from there
Browser app will never check if you got root or if your selinux is permissive or other things! Because it's none of its business!
Click to expand...
Click to collapse
We need ways for distinguishing unexperienced users and users who assume full responsibility for their own use.
Apps delivers many new possibilities and services, banking through browser app isn't enough actually.
abagm said:
Thank you for this thread!
Yeah, that is true. i hoped there are ways to disguise the complaints of MOMo (for example such a thing like renaming addon.d in /system to disguise "running custom rom"). And LOS 17 did run the banking apps, so I wanted to understand the difference.
Click to expand...
Click to collapse
Are you having problem with any specific app?
VD171 said:
Thank you, sir. I will help always as I can
We need ways for distinguishing unexperienced users and users who assume full responsibility for their own use.
Apps delivers many new possibilities and services, banking through browser app isn't enough actually.
Click to expand...
Click to collapse
It's true - doing your financial transactions through the web browser feels a little bit prehistoric to say the least but it works and you don't need to waste your precious time trying to hide your root and other customizations from some intrusive apps that shouldn't be intruding on your privacy like that in the first place
I know it's not the perfect solution but the more solutions we have to avoid this annoying safetynet 'feature' altogether the better. I am so happy that I don't need to bother with this useless safetynet 'feature'
lebigmac said:
It's true banking through browser app is a little bit prehistoric but it works and you don't need to waste your precious time trying to hide your root and other customizations from some intrusive apps that shouldn't be intruding on your privacy like that
I know it's not the perfect solution but the more solutions we have to overcome these annoying safetynet requirements the better. I am so happy that I don't need to bother with all this useless safetynet this safetynet that
Click to expand...
Click to collapse
Any type of detection can be bypassed.
Even native methods can be bypassed, because Android app's run on java.
So, at sometime and somewhere, results are given to/from java.
VD171 said:
Are you having problem with any specific app?
Click to expand...
Click to collapse
abagm said:
Yes, those banking apps BestSign (it detects root immediatly but can be used), S-PushTAN and VR-SecureGo. these three worked on rooted 'unnormal' LOS 17.1 but don't work now in 19.1. Momo said magisk and LSPosed were hidden butcomplains about that unnormal enviroment.
Click to expand...
Click to collapse
When does exactly the app crash?
May you attach some screenshots?
I've tried all them.
All them are working fine for me.
VD171 said:
When does exactly the app crash?
May you attach some screenshots?
I've tried all them.
All them are working fine for me.
Click to expand...
Click to collapse
---throwing in the towel - can't get it work as I wanted to. WIll return to the working version of ROM - and be proud to be outdated ...