Hi there
How could I get my phone Alps 21+ Ultra to support NFC as my phone tells me that it doesn't
have any support, please reply
What is Alps 21+ Ultra? This is Samsung S21 Ultra thread by the way.
olafsand said:
What is Alps 21+ Ultra? This is Samsung S21 Ultra thread by the way.
Click to expand...
Click to collapse
his from the future maybe
Samsung S21 Ultra Clone Firmware (Flash file) it's a clone firmware
Gavin53 said:
Hi there
How could I get my phone Alps 21+ Ultra to support NFC as my phone tells me that it doesn't
have any support, please reply
Click to expand...
Click to collapse
many devices have nfc, the most common are some headset, or even a passport if you have any (at least here in Europe)
you can use nfctools app (https://play.google.com/store/apps/details?id=com.wakdev.wdnfc&hl=it&gl=US) and put your phone near the passport... it shoud read the information
Those S21+ ultra knock-offs lack NFC, but that is compensated with a nice 3,5mm headphone jack port
do you see the NFC toggle in the quick panel? if not, press the + button and view more quick panel options
Post Nine said:
do you see the NFC toggle in the quick panel? if not, press the + button and view more quick panel options
Click to expand...
Click to collapse
Alps S21+ ultra is a Chinese clone without NFC...
Related
Of the five phones I've owned recently with rear fingerprint sensors (Honor 7X, Honor 8X, Samsung S9, Google Pixel 3a, Redmi Note 7), the only one which doesn't natively support fingerprint gestures is the Redmi Note 7.
Therefore, I can't swipe down or up on the fingerprint sensor on the Redmi Note 7 to expand or collapse the notification shade the way I can on the other phones. This is a major annoyance for me since I use the notification shade often when I'm using a phone one-handed, and the rear fingerprint sensor is so convenient for this purpose.
So I tried about a dozen different apps on the Play Store until I found one that did exactly what I wanted, and it's free. It's called Keyboard/Button Mapper.
https://play.google.com/store/apps/details?id=io.github.sds100.keymapper
It's not so easy to figure out at first, so I can post instructions if anyone needs help. In summary, however, you would create two new keymaps with the following mappings:
Trigger: <swipe down>
Action: Expand Notification Drawer
Trigger: <swipe up>
Action: Collapse Status Bar
With this one fix, the Redmi Note 7 can be just as convenient to use one-handed as any other modern phone. Enjoy.
does not even recognize my fingerprint sensor when applying for the trigger action
Alifirdaus said:
does not even recognize my fingerprint sensor when applying for the trigger action
Click to expand...
Click to collapse
Hi Alifirdaus. I'm sorry to hear that it's not working for you. Please list the steps you took so that I might help you. Thanks.
I have enabled all app requests (fixes) including root permission but the app does not recognize the fingerprint actions.
Mine doesnt work either... i just updated to MIUI 12... I'm not rooted. does this require root? thanks!
Gosh I've been looking for an app like this for so looooooong !! Thanks !! Working on my pocophone x3 Surya running arrow os android 11
Unfortunately I'm getting this on my Poco X3 NFC with custom rom. Any other solutions? Xposed edge pro doesn't recognize the fingerprint sensor.
Hello,
I am coming from a OnePlus 7 Pro. I was able to hide it on the 7 Pro. Can it be done on Samsung phones?
likecookies said:
Hello,
I am coming from a OnePlus 7 Pro. I was able to hide it on the 7 Pro. Can it be done on Samsung phones?
Click to expand...
Click to collapse
https://lmgtfy.app/?q=How+to+hide+navigation+keys+samsung+phone&iie=1
If One UI 2.5 is like 2.1 on my S9+ you can choose “navigation buttons“ or “full screen gestures” (swipe up where the navigation buttons would be). Under “full screen gestures” you can toggle whether or not you want “gesture hints” to appear.
Sorry, I don’t have my S20 FE yet to verify.
Here is a better explanation with images:
https://android.gadgethacks.com/how...es-your-samsung-galaxy-with-one-ui-2-0209206/
Here you go
Hello, I was using the holey light app on my S10.
I understand that holey light no longer works on Android 11.
I just got an S21 Ultra.
Which app (free or paid) can do the same?
I want a permanent black screen (even on a new notification, no AOD, no clock) with only the edge of the camera illuminated.
If possible the application using as little battery as possible.
Thank you all.
Hey, I use AodNotify. Works good for me.
Goodlock is supposed to release a new app soon called "LED dot star":
New goodlock modules for one ui 3.0
Samsung is bringing new Good Lock modules with One UI 3.0 for always-on display, gestures, and screen capture Samsung’s Good Lock is the most used app by Galaxy users to customize their phones with their own creativity. The Good Lock brings a bunch of impressive modules and apps to...
r2.community.samsung.com
AodNotify I agree is the best
destz0r said:
Goodlock is supposed to release a new app soon called "LED dot star":
New goodlock modules for one ui 3.0
Samsung is bringing new Good Lock modules with One UI 3.0 for always-on display, gestures, and screen capture Samsung’s Good Lock is the most used app by Galaxy users to customize their phones with their own creativity. The Good Lock brings a bunch of impressive modules and apps to...
r2.community.samsung.com
Click to expand...
Click to collapse
But its region locked I cant find it
oae08 said:
But its region locked I cant find it
Click to expand...
Click to collapse
It would not be a bad idea to go on that link, log in and post your demand to make good lock available for all the countries. Even if there are others who posted the same, add your voice to them.
oae08 said:
But its region locked I cant find it
Click to expand...
Click to collapse
If goodlock isnt available in your region, you can use finelock or nicelock. That's how I do it
destz0r said:
If goodlock isnt available in your region, you can use finelock or nicelock. That's how I do it
Click to expand...
Click to collapse
Are they the same? I think they are different
I don't want the aod to show up when a notification comes in, or the aod to be a black screen (I believe that was the trick with holey light).
Are you sure that aodnotify can display a totally black screen (no aod no clock) just the light notification and that it only disappears if I erase it or read it
oae08 said:
Are they the same? I think they are different
Click to expand...
Click to collapse
nicelock & finelock are two different apps which do exactly the same thing. so you can choose which one you use. i personally use finelock
inferno2 said:
I don't want the aod to show up when a notification comes in, or the aod to be a black screen (I believe that was the trick with holey light).
Are you sure that aodnotify can display a totally black screen (no aod no clock) just the light notification and that it only disappears if I erase it or read it
Click to expand...
Click to collapse
Edit: Actually, looks like its just a black screen, because the fingerprint sensor also turns on
Hi, what gcam you are using with Xiaomi 11T Pro?
BSG Gcam 8.1 works great
jimdorky said:
BSG Gcam 8.1 works great
Click to expand...
Click to collapse
If you already have the 11 t pro did it come with a pre-installed screen protector out of the box? How is the proximity sensor doing? Does it have double tap to wake/sleep screen? and how many hours of screen on time are you getting on 120 and/or 60 hz ?
Thanks
ron_hyatt said:
If you already have the 11 t pro did it come with a pre-installed screen protector out of the box? How is the proximity sensor doing? Does it have double tap to wake/sleep screen? and how many hours of screen on time are you getting on 120 and/or 60 hz ?
Thanks
Click to expand...
Click to collapse
yes, all xiaomi i had purchased always come with the standard screen protector. So far I dont have any complain on the sensor. double tap to wake ok, but no to sleep, i dont find this in the default launcher. I always on 120hz and getting 5-7h sot.
120ghz +2 sim + 5g + 5 mail sync + 2 whstap + telegram and other sync , 2 day full mix wify 5g. +
Work profile
6/7 h SOT
incredible.
i Cam from oneplus 6t , and was not bad... i like oneplus , but this phone is like ANOTHER WORLD.
Wake up and charge , time to dress , 15min and 100% FULL poweRR
gaspolo said:
120ghz +2 sim + 5g + 5 mail sync + 2 whstap + telegram and other sync , 2 day full mix wify 5g. +
Work profile
6/7 h SOT
incredible.
i Cam from oneplus 6t , and was not bad... i like oneplus , but this phone is like ANOTHER WORLD.
Wake up and charge , time to dress , 15min and 100% FULL poweRR
Click to expand...
Click to collapse
are you on Global ROM? What MIUI version are you running?
say7essica said:
are you on Global ROM? What MIUI version are you running?
Click to expand...
Click to collapse
I sell the phone haha too many big have the Rom MIUI , expecially with work profile , cannot upload file , share or install app inside work profile., I pick again oneplus 8t this time , and no more problem now!!, The phone mi11tpro is good as phone , but need another rom ahhaah
It's GCam Discussion Thread!
Vihru said:
Hi, what gcam you are using with Xiaomi 11T Pro?
Click to expand...
Click to collapse
I tested a lot of GCam ports and definitely the best till now in my opinion is MTSLCam_v4.1_MultiLibs. It gives amazing results, especially there are much more details comparing to other ports and MIUI camera app. Put configs file into folder created in internal storage and named ConfigsSettings8.3
I compered photos only from main camera.
MTSL: MTSLCam_V4.1
Download MTSLCam_V4.1 by MTSL.
www.celsoazevedo.com
Photo examples:
GCam vs MIUI Camera - Google Drive
drive.google.com
Configs file:
antykat_MTSL_v4.1_11TPro.xml
drive.google.com
Which gcam version come with working EIS ?
Hey guys,
Any way to make 108mp photos with GCam?
No 108mp for now on Scam... sorry mestake...no 108mx for now yet on GCam...
On Mi11t (not PRO) night mode does not work. Anyone have a solution?
MTSLCam_V6
<Moderator Edit>: Link removed.
My new configs for MTSLCam:
MTSL_11TPro_antykat_v2.xml
drive.google.com
New configs for MTSLCam:
MTSL_11TPro_antykat_v3.xml
drive.google.com
Sorry mate but I have to say that those settings are not good at all on my phone. Thanks anyway for proposing.
@Cocheton
Any details to give me a chance to fix it? What version have you tested? Anyway I'm sure it's better than MIUI camera.
Port from BigKaka - AGC_8.4.300.18_V6:
https://www.celsoazevedo.com/f...ogle-camera/dev-BigKaka/f/dl4/
Configs - AGC_11TPro_antykat_v1:
https://drive.google.com/file/...niqelzPNSzgY/view?usp=drivesdk
Put configs in folder:
Download -> AGC.8.4 -> configs
My setting for MTSLCam I took as a base the settings of @antykat.
I tried to improve the colorimetry as much as possible. the sky is still not perfect. the clouds are not as I would like. but I think the sensor is very limited. the dynamic range is low.
11tpro.xml.xml
drive.google.com
So it took me a couple of days but I developed a rear screen mirroring app called Mirror2RearUltra. It consists of a quick setting tile and nothing more.
Try it out for yourself, see what happens. I don't know how to squash the bugs but the source (and APK) is available on GitHub if anybody wants to take a peek.
Yes, it does mirror the display onto the rear display.
GitHub - tpkarras/Mirror2RearUltra: Rear screen mirroring plugin/app for Xiaomi Mi 11 Ultra.
Rear screen mirroring plugin/app for Xiaomi Mi 11 Ultra. - GitHub - tpkarras/Mirror2RearUltra: Rear screen mirroring plugin/app for Xiaomi Mi 11 Ultra.
github.com
Nothing happens when I start it. I see the headline, but the app interface is blank.
I'm not supposed if that's the expected behavior, but it doesn't seem to do anything regardless.
GuyWithRootedPhone said:
So it took me a couple of days but I developed a rear screen mirroring app called Mirror2RearUltra. It consists of a quick setting tile and nothing more.
Click to expand...
Click to collapse
Thank you.
But please specify which are the requirements:
- root ?
- Android version ?
- ROM ?
These info are not available also on your github repository.
munky-head said:
Nothing happens when I start it. I see the headline, but the app interface is blank.
I'm not supposed if that's the expected behavior, but it doesn't seem to do anything regardless.
Click to expand...
Click to collapse
you're supposed to start it from the quick tile.
themissionimpossible said:
Thank you.
But please specify which are the requirements:
- root ?
- Android version ?
- ROM ?
These info are not available also on your github repository.
Click to expand...
Click to collapse
it should be usable without root.
11 min (since that's what the Mi 11 Ultra) shipped with.
MIUI (developed with Xiaomi.eu) but should work with any MIUI version.
nasıl yükleyeceğimi anlamadım
I don't understand how to install it
frelinnn said:
I don't understand how to install it
Click to expand...
Click to collapse
release I uploaded didn't work, fixing it asap.
GuyWithRootedPhone said:
release I uploaded didn't work, fixing it asap.
Click to expand...
Click to collapse
and... fixed!
Great. Works a treat. Thank you.
@GuyWithRootedPhone I was just reviewing your code on github and as a casual android developer with no experience with this kind of thing (dealing with extra screens) it doesn't look TOO hard. I was wondering though, do you think it'd be possible to build an application that could read notifications and display them to the subscreen? I just absolutely hate that Xiaomi only allows it's default messaging and dialer app to display actual details to the subscreen. I love Google's implementation of Messenger and that's my preferred texting app, but with that as default, nothing appears like the Xiaomi messenger. Same situation with Google's dialer application.
If you have any ideas/tips you could throw my way, I'd be very interested in working on such an app that would allow selected applications to display their contents on the subscreen.
beta 2 is out... it takes methods from the subscreen app installed on the Mi 11 Ultra in an attempt to keep the screen on.
if anybody has any ideas or suggestions on how to keep the screen on full brightness without modifying the settings, that would be super helpful.
Release 1.0-beta2 · tpkarras/Mirror2RearUltra
added code to wake screen up upon launch/wake.
github.com
beta 3 is out, did some tweaks to get it to work on older devices.
if anybody can help me figure out how to keep the screen brightness on the rear display to max. I'd buy you a coffee, I'm struggling to figure out how this all works.
Release 1.0-beta3 · tpkarras/Mirror2RearUltra
Minor fixes. Fixed bug involving face down sensor.
github.com
This app isn't doing a thing
I actually had an idea about using rear screen as an input surface while gaming. For example you can map touches/swipes on rear screen onto an action/touch on front screen area and get another functionality. Your app is quite promising to start with. Thanks for this.
droidDHD said:
This app isn't doing a thing
Click to expand...
Click to collapse
can you logcat the app? i need to know if it's crashing or not.
Works fine on mine. Once installed, just swipe from the top, turn it on, click start now and when you tap rear screen to start, it shows main screen. Sorry can't take rear screenshot.
Rotation doesn't work.
Try put camera in video mode and you will end up upside down on rear display.
I would like this to work, because this is my missing feature from Android 12. That all camera options are seen in rear display.
I can't use android 12 and mui 13 because of one sim not able to do call forwarding.
Otherwise works, would be better if it was written in advance that you need to place it in quick launch.
不错 很好用
fixed the brightness to keep the screen bright at all times.
this is the final release, hoping it works for everybody.
Release 1.0-final · tpkarras/Mirror2RearUltra
includes fix to keep screen bright and prevent touch inputs.
github.com