Related
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
I flashed twrp, but the device got bricked, then I put the phone into fastboot then I typed "fastboot reboot fastboot" and it didn't enter that mode, it got into Redmi logo screen and then it turns off buy itself. it has that bootloop. and now I can't make it to enter to fastboot again to flash it. I can't do anything
it's a redmi 9 lancelot
Bring it to your dealer,when u cant enter nothing than its hard bricked i think(tell me if i am wrong)and as far as i know this can only be solved by a certified seller,but not 100% sure.
One thing from me to you.
Dont flash unstable software on your phone when u not know what u do,in special MTK devices.Good luck.Cheers!!!!
-CALIBAN666- said:
Bring it to your dealer,when u cant enter nothing than its hard bricked i think(tell me if i am wrong)and as far as i know this can only be solved by a certified seller,but not 100% sure.
One thing from me to you.
Dont flash unstable software on your phone when u not know what u do,in special MTK devices.Good luck.Cheers!!!!
Click to expand...
Click to collapse
I bought it on a kiosk in my country so it's gonna be harder to find someone. I thought it was gonna be a way to force to enter to fastboot, but it's impossible. I know there are some guys that can fix it by teamviewer
omg, what did u just do?
i am waiting for the official of twrp because theres a huge possibility of bricking your device.
before you do anything to your device you must read many articles on how to recover it. also read all the comments below the articles because some users have their experience installing the software.
back to the topic:
after you bricked your device you were able to go to fastboot but something went wrong because you soft bricked your device then you want to go to fastbootd.
thats was the wrong move you did to your device.
note: if theres a bootloop or something went errors after installing custom rom and you can able to access fastboot. this is the only thing you need to do, use miflashtool and install default firmware.
some users flashing the meta if theres a bootloop on their device, but for me the very secured step is flashing default firmware in his compatible tools like miflashtool.
search shas post to unbrick your device. try it since your device got bricked.
mhark.moby said:
omg, what did u just do?
i am waiting for the official of twrp because theres a huge possibility of bricking your device.
before you do anything to your device you must read many articles on how to recover it. also read all the comments below the articles because some users have their experience installing the software.
back to the topic:
after you bricked your device you were able to go to fastboot but something went wrong because you soft bricked your device then you want to go to fastbootd.
thats was the wrong move you did to your device.
note: if theres a bootloop or something went errors after installing custom rom and you can able to access fastboot. this is the only thing you need to do, use miflashtool and install default firmware.
some users flashing the meta if theres a bootloop on their device, but for me the very secured step is flashing default firmware in his compatible tools like miflashtool.
search shas post to unbrick your device. try it since your device got bricked.
Click to expand...
Click to collapse
Youre so right,nice written!!!
mhark.moby said:
omg, what did u just do?
i am waiting for the official of twrp because theres a huge possibility of bricking your device.
before you do anything to your device you must read many articles on how to recover it. also read all the comments below the articles because some users have their experience installing the software.
back to the topic:
after you bricked your device you were able to go to fastboot but something went wrong because you soft bricked your device then you want to go to fastbootd.
thats was the wrong move you did to your device.
note: if theres a bootloop or something went errors after installing custom rom and you can able to access fastboot. this is the only thing you need to do, use miflashtool and install default firmware.
some users flashing the meta if theres a bootloop on their device, but for me the very secured step is flashing default firmware in his compatible tools like miflashtool.
search shas post to unbrick your device. try it since your device got bricked.
Click to expand...
Click to collapse
I had tried that twrp before, the new thing I did was to flash a new rom, then the rom got stuck in the logo, so i asked the creater how could i solve it? He told me to flash permessive. That's why I installed twrp. But i saw twrp wasnt working. I went to fastboot to flash my software, but as you told me i went to fastbootd too. I took it to repair. I hope the can do something
try to hard reset Bro.
fastboot reboot fastboot is wrong. fastboot reboot bootloader is right.（op）
I decided to exchange it for a Redmi note 9s since I saw the development is better for that cellphone, even xiaomi mitool v2 is showing me an official twrp recovery and magisk root. Im just waiting to unlock my bootloader. btw is this a MTK device too? i heard mtk devices gets brick easily as it happened with my redmi 9
RodrySmoke said:
I decided to exchange it for a Redmi note 9s since I saw the development is better for that cellphone, even xiaomi mitool v2 is showing me an official twrp recovery and magisk root. Im just waiting to unlock my bootloader. btw is this a MTK device too? i heard mtk devices gets brick easily as it happened with my redmi 9
Click to expand...
Click to collapse
No idea why all have problems with MTK devices.
I SAY IT AGAIN AND AGAIN,YOU MUST REALY KNOW WHAT YOU DO ON THIS SOC,I HAVE SOME PHONES WITH MTK SOC AND I HAVE FLASHED AND BRICKED IT LIKE REDMI 9 NEARLY HUNDRED TIMES BUT HAVE NEVER A DEAD DEVICE AND I TEST MY THINGS AND ALL WHAT I SEE WHICH INTERESTING.
To your phone:
It have a Snapdragon 720G on board,not realy a killer but hey its Quallcom.Cheers!!!!
yeah, I do think the problem was because the twrp was bad, and I didn't flash the rom expectantly when I knew it, it was bad. that's my lesson I learnt, everytime it doesn't boot properly, I'm gonna flash the stock rom again
admin3453 said:
I flashed twrp, but the device got bricked, then I put the phone into fastboot then I typed "fastboot reboot fastboot" and it didn't enter that mode, it got into Redmi logo screen and then it turns off buy itself. it has that bootloop. and now I can't make it to enter to fastboot again to flash it. I can't do anything
Click to expand...
Click to collapse
Disable authorization and unbrick your Redmi 9
Now you can unbrick your device even if the redmi logo not coming..just go to below link and follow their steps.... https://megafon929.github.io/mtk For more information and how to do follow the below post...
forum.xda-developers.com
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Update: If someone would be able to extract a scatter file from their own OnePlus Ace too, I think that may help me
Sorry that you've ran into this, but thanks for confirming bootloader can be unlocked, and root is possible.
Getting the 10R over the Realme GT 2 (sad situation of bootloader unlock not possible). Hope you get an extract soon
Made some progress!
Got my hands on the Ace's firmware files, which included the scatter file. Redownloaded the newest 6.2 version of SP Flash Tool and loaded the scatter and auth files successfully. Clicked download, connected USB to phone while holding Vol + and Vol - and finally! Sp Flash Tool connected to the phone! However, now I've run into another problem: SP Flash Tool will show a red progress bar at the bottom saying 'Download DA', it will reach 100% quickly then throw me a very vague error simply saying 'error_msg'. And that's it. Tried unchecking different boxes, reinstalled drivers but it will always throw back this error.
Any ideas to figure out what the error is and fix it would be amazing
hello, im here to show support. My ace also bricked because i want to change from color os to oxygen. I used fastboot enhanced, might have missed a step and bricked. Mine also import, but the shop i bought offers 1 year warranty. Shop says have to wait for msm download tools to reflash or i have to pay $60 to send back to China because my own fault. Man, it is going to be a long wait for msm tools. haha
KeepingKeyes said:
saying 'error_msg'.
Click to expand...
Click to collapse
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
DimRim said:
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
Click to expand...
Click to collapse
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
KeepingKeyes said:
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
Click to expand...
Click to collapse
maybe this is because of the new chip and there is no support for bypassing it.I thought the method would work.also a tip-edit the scatter file, namely partition_name: super or system,changing the value is_download: false to is_download: true.hopefully help
And thank you for sharing the files
I too am stuck with Brick.
Is there a Bypass for the Demesity 8100 being developed?
This device is mostly Oppo, but there is no Oppo flash Tool?
There is very little information available.
KeepingKeyes said:
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
Still stuck or were you able to find any solution?
yashaswee1708 said:
Still stuck or were you able to find any solution?
Click to expand...
Click to collapse
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
KeepingKeyes said:
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
Click to expand...
Click to collapse
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
yashaswee1708 said:
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
Click to expand...
Click to collapse
I seem to have made fastboot inaccessible on my device, so I've been unable to use Fastboot enhance or utilise any ways to flash using fastboot
Damn!! I hope you find some way to fix your device. Good luck.
关于一加ACE如何优雅的刷入氧OS12.1这件事 来自 天伞桜 - 酷安
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
GTAstar said:
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
Click to expand...
Click to collapse
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
hamsteer said:
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
Click to expand...
Click to collapse
Are you still able to boot to Fastboot?
yashaswee1708 said:
Are you still able to boot to Fastboot?
Click to expand...
Click to collapse
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
hamsteer said:
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
Click to expand...
Click to collapse
So you are not able to boot right?
If not, you can try flashing the partitions manually from fastboot. (If you are willing to try I can provide the steps. This works for other OnePlus devices.)
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Use latest fastboot rom and download agent to mtk all.bin
Restart phone by power+ volume key
Also usb dk driver and libusb tool
Or remove back cover and battery take care with fingerprint
Already done everything you said, nothing works.
iOussamato_ said:
Already done everything you said, nothing works.
Click to expand...
Click to collapse
Try again
faisal9666 said:
Try again
Click to expand...
Click to collapse
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
iOussamato_ said:
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
Click to expand...
Click to collapse
Very strange
STATUS_EXT_RAM_EXCEPTION (0xC0050005)
1.
Hello bro, I only registered on XDA to inform you and gonna post on other thread for people suffering from this error.
2.
I have redmi 9c angelica
3.
I had the same issue like yours. Just fixed it 2,3 mins ago after many days of suffering. I tried 3 fastboot roms in which only this work (angelica_global_images_V12.0.12.0.QCRMIXM_20210412.0000.00_10.0_global). I hope it also work with you. Give a try
i followed this and boom now all of my stress has been released.
Firmware link
How to Unbrick Redmi 9C (angelica) without using auth account. Tested and working! - OmBob Opreker
This is tutorial how to unbrick Xiaomi Redmi 9C (angelica) using mediatek bypass tool and sp flash tools without using mi auth account using global stock
ombob.my.id
iOussamato_ said:
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Click to expand...
Click to collapse
use this video 100% working
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
demoimoet said:
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
Click to expand...
Click to collapse
where are test points located?
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Ivan.Adriazola said:
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
View attachment 5859871
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Click to expand...
Click to collapse
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
if you wan
ax0 said:
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
Click to expand...
Click to collapse
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Ivan.Adriazola said:
if you wan
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Click to expand...
Click to collapse
sure my discord is axon#7061
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
brav3h3ar8 said:
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
Click to expand...
Click to collapse
thank you so much
idk why but TFT managed to fix it!
ax0 said:
thank you so much
idk why but TFT managed to fix it!
Click to expand...
Click to collapse
It's my pleasure
ax0 said:
sure my discord is axon#7061
Click to expand...
Click to collapse
Hello, please add me, I'm desperate how to do this :-(
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
Hi,
Just follow the steps and you'll be good.
[Guide] How to unbrick redmi 9C by flashing with SP Tools without Auth file(Tested Working)
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT. If you can boot into Fastboot mode then I would encourage you to flash...
forum.xda-developers.com
I already tried it with my device and it works well.
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today