I tried to root my phone today and I failed and my phone is not working right now. Does anybody know how to fix it? Can someone please help me? Please!!! Thank you so much.
hxsports said:
I tried to root my phone today and I failed and my phone is not working right now. Does anybody know how to fix it? Can someone please help me? Please!!! Thank you so much.
Click to expand...
Click to collapse
My phone current is look like this. And I tried Odin flash and the process is failed.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 332 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hxsports said:
My phone current is look like this. And I tried Odin flash and the process is failed.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 332 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
My phone stuck in Download mode right now and it shows
partition vbmeta
Reason vbmeta: Error verifying vbmeta image:
0_0INDIVLDUMT_EDRHS_IMTHSGAUEMSAC
if your phone won't boot because of verified boot, either flash back to stock or flash vbmeta_disabled.tar
if you tried to patch your boot.img this wouldn't really be a problem because magisk patches vbmeta for you when you patch.
if you tried to flash a magisk zip you should have followed instructions for twrp which requires flashing vbmeta_disable.tar in Odin. in other words you couldn't have followed instructions.
hxsports said:
I tried to root my phone today and I failed and my phone is not working right now. Does anybody know how to fix it? Can someone please help me? Please!!! Thank you so much.
Click to expand...
Click to collapse
bootloader is locked!! You got a US phone version, you can not Root neither install a custom Rom or TWRP.
Download the last official Rom for your phone, and flash it through Odin. Then your phone will work again.
3mel said:
if your phone won't boot because of verified boot, either flash back to stock or flash vbmeta_disabled.tar
if you tried to patch your boot.img this wouldn't really be a problem because magisk patches vbmeta for you when you patch.
if you tried to flash a magisk zip you should have followed instructions for twrp which requires flashing vbmeta_disable.tar in Odin. in other words you couldn't have followed instructions.
Click to expand...
Click to collapse
I can't flash anything into it because it say OEM lock and
hxsports said:
I can't flash anything into it because it say OEM lock and
Click to expand...
Click to collapse
flash the correct stock firmware for your phone and nothing else. if you have an American FE there's NOTHING ELSE that will work on it.
3mel said:
flash the correct stock firmware for your phone and nothing else. if you have an American FE there's NOTHING ELSE that will work on it.
Click to expand...
Click to collapse
Correct. There are sites, from where you may download the last available firmware for your phone!
Download it and flash it correctly with Odin, and it will work.
Download SM-G781U1 / Galaxy S20 Fan Edition 5G SM-G781U1 XAA in Samfw - Samsung firmware download
SM-G781U1 / Galaxy S20 Fan Edition 5G SM-G781U1 XAA samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Download the latest one for US version for this phone, currently they jumped to bootloader v.7
Carreful, I gave you a link for S20 FE 5G !! If you got S20 FE 4G, download the adequate one.
Related
So here is the skinny;
Note 3 + Knoxraid v3.2 for sm-n900a.
I successfully flashed the kitkat version of this rom and decided to flash back to stock so I could re-root but in the process I messed up terribly.
It's been a few hours, and a few pointless hour long downloads and this is the most recent thing that;s come up
I flashed the PIT. BL. PDA. and PHONE files(mj5) and everything went fine.
My phone rebooted with the "Samsung Galaxy Note 3" logo and the little "Custom" unlock pad at the bottom.
*****Phone will not continue any further unless battery pull*****
I'm stuck and it's been about 13 hours since I started this fix.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> sdi.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
How come my phone won't boot and can you walk me through this anyone???
...all of this because I wanted safestrap back, smh....
jordeste said:
So here is the skinny;
Note 3 + Knoxraid v3.2 for sm-n900a.
I successfully flashed the kitkat version of this rom and decided to flash back to stock so I could re-root but in the process I messed up terribly.
It's been a few hours, and a few pointless hour long downloads and this is the most recent thing that;s come up
I flashed the PIT. BL. PDA. and PHONE files(mj5) and everything went fine.
My phone rebooted with the "Samsung Galaxy Note 3" logo and the little "Custom" unlock pad at the bottom.
*****Phone will not continue any further unless battery pull*****
I'm stuck and it's been about 13 hours since I started this fix.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> sdi.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
How come my phone won't boot and can you walk me through this anyone???
...all of this because I wanted safestrap back, smh....
Click to expand...
Click to collapse
Why are you flashing 3.5? You should have flashed 5.1. Did you read the OP for KNOXRAID FULLY?
jordeste said:
So here is the skinny;
Note 3 + Knoxraid v3.2 for sm-n900a.
I successfully flashed the kitkat version of this rom and decided to flash back to stock so I could re-root but in the process I messed up terribly.
It's been a few hours, and a few pointless hour long downloads and this is the most recent thing that;s come up
I flashed the PIT. BL. PDA. and PHONE files(mj5) and everything went fine.
My phone rebooted with the "Samsung Galaxy Note 3" logo and the little "Custom" unlock pad at the bottom.
*****Phone will not continue any further unless battery pull*****
I'm stuck and it's been about 13 hours since I started this fix.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> sdi.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
How come my phone won't boot and can you walk me through this anyone???
...all of this because I wanted safestrap back, smh....
Click to expand...
Click to collapse
Follow the MJ5 restore method. Make sure you read very carefully.
http://forum.xda-developers.com/showthread.php?t=2629380
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Good News
Thanks for checking up on me guys and trying to help.
UPDATE***
My friend and I managed to flash the 4.3 stock version back on to my note 3 in which a few odd things went down:
1.) My Baseband version is the MJ5, however my Build number is M19 - what's up with that?
2.) The dreaded "Detection information" triangle keeps rearing it's ugly head and there's no remedy in sight to avoid the popup.
Other than that, I'm running just fine but I feel naked without my root privilages. 7z files won't open via 7zip and Kingo Root & Safestrap are what got me into this mess so I'm not really trying to go that route again.
Well at least you're up and running. I'd run the restore method again just to get rid of any issues--the MJ5 restore method. Then root using his method at the end; if literally takes 1 minute.
Sent from my SAMSUNG-SM-N900A using Tapatalk
my sisters s5 was in the process of updating and failed. it's now stuck in a boot loop saying a custom rom installed and there hasn't been. only on mine anywyays im getting these error messages when i go to flash the stock firmware and im not sure what they mean or what im doing wrong.
jondabomb541 said:
my sisters s5 was in the process of updating and failed. it's now stuck in a boot loop saying a custom rom installed and there hasn't been. only on mine anywyays im getting these error messages when i go to flash the stock firmware and im not sure what they mean or what im doing wrong.
Click to expand...
Click to collapse
this is the phone screen
jondabomb541 said:
this is the phone screen
Click to expand...
Click to collapse
What stock firmware did you try to flash?
shortydoggg said:
What stock firmware did you try to flash?
Click to expand...
Click to collapse
G900AUCU1ANCE_G900AATT1ANCE_ATT\G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5
jondabomb541 said:
G900AUCU1ANCE_G900AATT1ANCE_ATT\G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5
Click to expand...
Click to collapse
That's the wrong file to flash to that phone.
I suggest you try the OI5 part of this guide, first since she wants the update.
http://forum.xda-developers.com/showthread.php?t=2785185
shortydoggg said:
That's the wrong file to flash to that phone.
I suggest you try the OI5 part of this guide, first since she wants the update.
http://forum.xda-developers.com/showthread.php?t=2785185
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
It gets stuck right here, which is normal but it's been here for an hour. should i try a different file?
I'd say start over, but this time do not flash the BL file. Do the AP, CP, and CSC files only.
Hi,
I promised myself that I won't be rooting nor toying around with my S10 (GM-973F). but since I got it on the 30th of April, I still didn't get any security update. it is saying that I'm running G973FXXU1ASD5 since I got it but it is with April security patch level.
I don't know but I think that My CSC is set for TKD/XSG, don't know what region that is.
Can anyone help me getting the official update without using Odin
Thanks
algnerd said:
Hi,
I promised myself that I won't be rooting nor toying around with my S10 (GM-973F). but since I got it on the 30th of April, I still didn't get any security update. it is saying that I'm running G973FXXU1ASD5 since I got it but it is with April security patch level.
I don't know but I think that My CSC is set for TKD/XSG, don't know what region that is.
Can anyone help me getting the official update without using Odin
Thanks
Click to expand...
Click to collapse
Why not using Odin? I have flashed first May update, and last night second May update ( the fixed one ) without any problem. Using HOME_CSC I managed to keep all my data and I am getting a much better SOT with this May update now. Just download latest SamFirm on your PC, type the model of your device ( SM-G973F ) , type the AUT in the Region section, make sure that Auto, Check CR32 and Decrypt automatically are enabled. Super easy.
thefatal90 said:
Why not using Odin? I have flashed first May update, and last night second May update ( the fixed one ) without any problem. Using HOME_CSC I managed to keep all my data and I am getting a much better SOT with this May update now. Just download latest SamFirm on your PC, type the model of your device ( SM-G973F ) , type the AUT in the Region section, make sure that Auto, Check CR32 and Decrypt automatically are enabled. Super easy.
Click to expand...
Click to collapse
When using Phone info, it says that my active CSC is TKD and I have a bunch of available ones like AUT and XSG, should I just donwload AUT and flash it using odin and I'll keep my data? because I don't want to set my phone up once again.
algnerd said:
When using Phone info, it says that my active CSC is TKD and I have a bunch of available ones like AUT and XSG, should I just donwload AUT and flash it using odin and I'll keep my data? because I don't want to set my phone up once again.
Click to expand...
Click to collapse
Yes, just download AUT version and when you download it and extract the .zip on your Desktop you will see a files named: AP_ , BL_ , CP_ , CSC_OMC_OMX and HOME_CSC_OMC.... Make sure you have selected the HOME_ CSC and not the CSC_OMC.... , that way nothing will change and your data will be intact.
thefatal90 said:
Yes, just download AUT version and when you download it and extract the .zip on your Desktop you will see a files named: AP_ , BL_ , CP_ , CSC_OMC_OMX and HOME_CSC_OMC.... Make sure you have selected the HOME_ CSC and not the CSC_OMC.... , that way nothing will change and your data will be intact.
Click to expand...
Click to collapse
Hi, I have Exynos S10 / T-Mobile / Czech rep. Can I also download AUT version and use that "HOME_CSC" without wiping device? Attached screenshot from my info About phone.
Sent from my SM-G973F using XDA Labs
rmn.br said:
Hi, I have Exynos S10 / T-Mobile / Czech rep. Can I also download AUT version and use that "HOME_CSC" without wiping device? Attached screenshot from my info About phone.
Sent from my SM-G973F using XDA Labs
Click to expand...
Click to collapse
I have Exynos as well. You can do the same as I did, you data will be safe. Make sure you know how to use Odin and to boot into download mode.
I'm not able to get into download mode, I get the Samsung galaxy S10 powered by knox then I have a samll vibration and go back the same screen
algnerd said:
I'm not able to get into download mode, I get the Samsung galaxy S10 powered by knox then I have a samll vibration and go back the same screen
Click to expand...
Click to collapse
When I finaly managed to get the phone into download mode
there are odin's logs all in under 2 sec
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> up_param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> keystorage.bin.lz4
<ID:0/004> uh.bin.lz4
<ID:0/004> vbmeta.img.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> dt.img.lz4
<ID:0/004> dtbo.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> vendor.img.lz4
<ID:0/004> vbmeta.img.lz4
<ID:0/004> userdata.img.lz4
<ID:0/004> dqmdbg.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> modem_debug.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> product.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and no update installed
-----------------------------------------edit
I was able to flash (using Odin 3.13.1) the latest AUT firmware but still having TKD as CSC :/
algnerd said:
When I finaly managed to get the phone into download mode
there are odin's logs all in under 2 sec
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> up_param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> keystorage.bin.lz4
<ID:0/004> uh.bin.lz4
<ID:0/004> vbmeta.img.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> dt.img.lz4
<ID:0/004> dtbo.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> vendor.img.lz4
<ID:0/004> vbmeta.img.lz4
<ID:0/004> userdata.img.lz4
<ID:0/004> dqmdbg.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> modem_debug.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> product.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and no update installed
-----------------------------------------edit
I was able to flash (using Odin 3.13.1) the latest AUT firmware but still having TKD as CSC :/
Click to expand...
Click to collapse
You need to flash WITHOUT sim and memory cards. When done let the phone turn on. When boot up you will see Let's start! on screen, now insert your sim and let the phone restart.
Rexton270 said:
You need to flash WITHOUT sim and memory cards. When done let the phone turn on. When boot up you will see Let's start! on screen, now insert your sim and let the phone restart.
Click to expand...
Click to collapse
What if I don't want to lose my data?
I have the same issue. On csc NZC, tried flashing update with csc BTU and it looked successful in odin, but the phone didn't actually update.
Sent from my SM-G973F using Tapatalk
Fixed it for me - I used AUT as the CSC for downloading from the Frija tool, rather than BTU.
Flashed successfully, even with simcard in.
Sent from my SM-G973F using Tapatalk
awojtas said:
Fixed it for me - I used AUT as the CSC for downloading from the Frija tool, rather than BTU.
Flashed successfully, even with simcard in.
Sent from my SM-G973F using Tapatalk
Click to expand...
Click to collapse
Did you use home_csc or just csc?
algnerd said:
Did you use home_csc or just csc?
Click to expand...
Click to collapse
Home_csc, no wipe
did your CSC stayed the same? or changed to AUT?
Csc is the same, but update applied. Carrier stuffs like voice over WiFi still work.
Sent from my SM-G973F using Tapatalk
flashed it, works. thanks
awojtas said:
Csc is the same, but update applied. Carrier stuffs like voice over WiFi still work.
Sent from my SM-G973F using Tapatalk
Click to expand...
Click to collapse
I thought you managed to change the csc :/
I did apply the update but it is still the same csc for me
algnerd said:
I thought you managed to change the csc :/
I did apply the update but it is still the same csc for me
Click to expand...
Click to collapse
If you want to change CSC you need to flash the CSC file, not home_CSC.
algnerd said:
What if I don't want to lose my data?
Click to expand...
Click to collapse
Do back up. If successful it's worth it...
So I am a poor guy that has a dream of using a Note 8 for this is my dream phone. Somebody post a listing in Facebook that his note 8 is somewhat useless for he don't know what is the problem and he is selling it as a bargain so I grab it.
Now I am stuck with this phone that won't turn on (unless you go and place it on a wireless charger then it will turn on by itself), won't do anything and is stuck with download mode(see photo 1).
I try to flash a SM-N950N firmware using Odin v3.13.1 but I am getting an error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4226 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(see photo 2)
Please help me. I really want to have this note 8.
Unfortunately, XDA forums won't allow me to upload pics. You can email me @ [email protected]
Could be that the internal storage is faulty and needs repaired.
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
What do you mean internal storage? like the emmc?
eunszette said:
What do you mean internal storage? like the emmc?
Click to expand...
Click to collapse
Yes.
iceepyon said:
Yes.
Click to expand...
Click to collapse
That is sad. Well I try to do it again and I am getting a different error which is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Flash the root file via odin. That is the easiest way to repartion. This worked for me.
Sent from my SM-N950F using Tapatalk
where is that root file via odin @yashthemw ?
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
Hi am wondering if you could help with my Galaxy Note 8
I am able to install the firmware using ODIN without any errors on download mode but after ODIN is finished the phone turns off and does not boot.
I have taken the phone to a repair shop as well and they have confirmed that there is no hardware issues,
truenitos said:
where is that root file via odin @yashthemw ?
Click to expand...
Click to collapse
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Yashfauuu said:
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Click to expand...
Click to collapse
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZIHpXvYPGVBJZmKE1ga5_dH4oIUx5WXhkck
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZ...dH4oIUx5WXhkck
Click to expand...
Click to collapse
I have the same problem. Only download mode available. Cannot turn on the phone after restarting, the phone turns on automatically after about 1 hour.
The above file stops at:
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
did it will work forme ( N950N) u5
the file in meag is encrypted could you pleasegive us the decription password
my phone stops also like this
Had some issue during flashing, and the process got interrupted.
Now the phone is stuck on "An error has occured while updating the device software", can't get in to recovery or download mode.
Any advice would be appreciated.
Thanks.
k10n9 said:
Had some issue during flashing, and the process got interrupted.
Now the phone is stuck on "An error has occured while updating the device software", can't get in to recovery or download mode.
Any advice would be appreciated.
Thanks.
Click to expand...
Click to collapse
keep pressing on volume down and power and insert cable to get bootloader mode again
carlitobahsoun said:
keep pressing on volume down and power and insert cable to get bootloader mode again
Click to expand...
Click to collapse
it just keeps going back to this screen ""An error has occured while updating the device software""
k10n9 said:
it just keeps going back to this screen ""An error has occured while updating the device software""
Click to expand...
Click to collapse
ok ,repeat : once screen black , keep pressing volume up + key power and insert cable
dont panic , happend to me dont worry
thanks. managed to get it to download mode.
another issue arise, trying to flash via odin again but it says <ID:0/004> Re-Partition operation failed.
k10n9 said:
thanks. managed to get it to download mode.
another issue arise, trying to flash via odin again but it says <ID:0/004> Re-Partition operation failed.
Click to expand...
Click to collapse
than u are flashing uncorrect firmware....show me what firmware u are and what are u trying to flash
And u have to make sure u have repartition unchecked in odin
carlitobahsoun said:
than u are flashing uncorrect firmware....show me what firmware u are and what are u trying to flash
Click to expand...
Click to collapse
G998U1_XAA to G991U_TMB
sswagonman said:
And u have to make sure u have repartition unchecked in odin
Click to expand...
Click to collapse
repartition is unchecked
you cant flash s21 firmware to a s21 ultra
k10n9 said:
G998U1_XAA to G991U_TMB
Click to expand...
Click to collapse
What exactly are you trying to do? Flashing G998 to G991? Is that a mistype or are you actually trying to flash a different device firmware on your phone?
jerrycoffman45 said:
you cant flash s21 firmware to a s21 ultra
Click to expand...
Click to collapse
It's s21 ultra firmware:
Samsung Galaxy S21 5G Firmware Download SM-G991U Free Download
Samsung Galaxy S21 5G Firmware Download SM-G991U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
enigmaamit said:
What exactly are you trying to do? Flashing G998 to G991? Is that a mistype or are you actually trying to flash a different device firmware on your phone?
Click to expand...
Click to collapse
I was having the VoLTE issue, and wanted to try this:
VoLTE not working since OneUI 4.0 Beta installation
Hello All, I posted this in Samsung Community, but unfortunately none was able to help. I am hoping XDA members could help fix this issue. I am facing a strange problem with my S21 Ultra Unlocked which was directly bought from Samsung. I had...
forum.xda-developers.com
no G991U_TMB is s21 firmware you need g998u or g998u1 firmware
G998U and G998U1 Firmware Links and Flashing Discussion Here
For those who aren't already aware, G998U is the model number of all of the US carrier versions of the S21 Ultra. The G998U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100%...
forum.xda-developers.com
jerrycoffman45 said:
no G991U_TMB is s21 firmware you need g998u or g998u1 firmware
G998U and G998U1 Firmware Links and Flashing Discussion Here
For those who aren't already aware, G998U is the model number of all of the US carrier versions of the S21 Ultra. The G998U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100%...
forum.xda-developers.com
Click to expand...
Click to collapse
ok. let me try again
Hi all,
I really need some help. I bricked my S21 Ultra. I bought it in Thailand and wanted to change it to German CSC. And it now shows on the screen "an error occured while updating the sofware".
Frst in red it was saying something ike
Hash of Data Does Not Match Digest in DescriptorNow it only says "DEBORE :" nothing behind it....
I tried installing HOME_CSC_OXM_G998BOXM4BULI from HOME_CSC_OXM_G998BOXM4BVB1 (I entered all 4 flles in ODIN, ticked only Auto_Reboot and F.Rest Time ticked.
I cannot restart it or shut it off. It always come back to that screen.
Can anyone help?
In future you'll find that the error has occured screen is actually download mode it just displays a different screen. If you plug your phone in it registers and flashes fine from that screen.
GeeAyeZee said:
In future you'll find that the error has occured screen is actually download mode it just displays a different screen. If you plug your phone in it registers and flashes fine from that screen.
Click to expand...
Click to collapse
But I cannot flash with odin, I cannot go back anywhere (e.g. Factory Reset). What can I do? Do you have an Idea? Smart Switch does not have the recovery option...
those are the error messages in ODIN:
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> userdata.img
<ID:0/004> misc.bin
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 10626 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Alex_Muc said:
those are the error messages in ODIN:
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> userdata.img
<ID:0/004> misc.bin
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 10626 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
make sure you get the latest firmware using frija and delete then reinstall latest drivers from samsung. use a different cable perhaps and a usb 2.0 port. If your quick you can access download mode by inserting the cable just as the phone reboots from button combo
GeeAyeZee said:
make sure you get the latest firmware using frija and delete then reinstall latest drivers from samsung. use a different cable perhaps and a usb 2.0 port. If your quick you can access download mode by inserting the cable just as the phone reboots from button combo
Click to expand...
Click to collapse
forget smart switch its useless