Related
Please, anyone, how can I flash my wizard from the bootloader screen?. All the procedures around explain flashing with ROMUpdateUtility, but none from the bootloader screen ... Do I have a brick????
Please, help and thank you in advance !!!
nostromo76 said:
Please, anyone, how can I flash my wizard from the bootloader screen?. All the procedures around explain flashing with ROMUpdateUtility, but none from the bootloader screen ... Do I have a brick????
Please, help and thank you in advance !!!
Click to expand...
Click to collapse
It works just the same. The only difference is that the updater doesn't know the version of the ROM installed.
When one starts the updater (RUU) with device running normally the process loads two files called RUUGetInfo.exe and EnterBootLoader.exe . The first gets the OS version currently running and the second sends the phone into the 3 color mode. As you see the updater HAS to work from the bootloader
But i guess the wiki could have told you that... (why bother?)
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Was restoring the stockspl succesfull?
What info do you get in bootloader?
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
pls dont wast threads
hi
a humble request Kindly dont was threads i have created a specific thread for Q& A on Jade why not post it their pls see below link
i see u have wasted 3 thread which could have been used for a much more usefull purpose this is just my humble request to you i hope u will do the neeful thanks
Note : kindly read the first page u would understand why not to waste threads
http://forum.xda-developers.com/showthread.php?t=534581
orange3g said:
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Click to expand...
Click to collapse
"a humble request Kindly dont was threads" read your thread on that, space taken up whether new thread or reply is the same.
orange3g said:
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
Click to expand...
Click to collapse
Am afraid you have a problem, you should have down it the other way around...first stock ROM then stock SPL.....but this is merely a fact then helping you out, i have absolutely no clue how to go from here...sorry!
Maybe someone who can offer some practical assistance will be along soon ......
@Nirak: yes, I misread it. What a silly thing to do. Do you think HTC can help. The phone is in warranty.
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Have you tried to flash your rom through the boot loader mode
try this
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
orange3g said:
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Click to expand...
Click to collapse
Send them a PM, Olipro is not often here, but Cmonex is
haree said:
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
Click to expand...
Click to collapse
Doesn't work because it needs a functioning windows mobile, which I don't have. Mine gets stuck.
thomas01_58 said:
Have you tried to flash your rom through the boot loader mode
Click to expand...
Click to collapse
Yes, nothing happens. The screen is stuck at 0%. I tried using a htc original rom, it got to 1% and said something like not suitable for this device.
I sure this sounds rather silly ,and I am sure you have tried it,have you tried removing the battery and then putting it back again.
Not sure if you tried this already:
Run HardSPL when your phone is in tricolor mode (bootloader?).
Then reflash a stock ROM, also in tricolor mode.
Finally, flash stock SPL.
Hope this helps.
@izzysc: I have tried it (will try again though) in running HardSPL when phone is in tricolor mode. It did not work.
Nirak said:
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
Click to expand...
Click to collapse
I have PMd Cmonex. Thanks.
replied to PM
cmonex said:
replied to PM
Click to expand...
Click to collapse
Tx! had an idea you could help out...
Hi,
Hope someone can help.
Been trying to instal Dutty's wm6.5 R12 rom on my touch hd but whatever I try, it just gets stuck at the screen with the bar and stay at 0%.
I have searched the forum and tried almost everything I could find. SSPL HSPL USPL and all won't work.
Anyone have any ideas for a noob?
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
jigners said:
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
Click to expand...
Click to collapse
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
look, no one is being a smart ass here. in addition, your description of the the steps you've followed are very vague. my friend, we see 5-10 posts like this every day and in every case, the OP has missed/skipped one or two steps in the flashing process. simply stated, the guides WILL help you flash your device. if as you stated, "SSPL HSPL USPL and all won't work you have to complete this task first. you HAVE to update your SPL before you can flash Dutty's ROM. put your device in bootloader mode and if IT DOES NOT display the following, you will not be able to flash a ROM:
BLAC120 (or BLAC110) 32M
SPL-1.56.01 OliNex
MicroP-BlackStone (LED) v 6
you HAVE to complete this step before you can flash any WM 6.5 ROM. read the guides, make your own easy-to-understand-checklist and follow it to confirm you've completed ALL the steps. be patient and you'll succeed. as a reference, you can use the links in my signature to help you with the process. good luck.
Hi,
I not sure you read the Dummies guide yet.
[TUT] Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
http://forum.xda-developers.com/showthread.php?t=505377
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* Go to step HSPL3 if successful.
Try to follow this step. Copy the file to phone and boot from there. then u should be able to do so.
Hi guys and girls,
thanks for trying to help. I do understand that people like me who are new to flashing a cooked rom will ask many silly questions. I'll try and formulate better which steps I have done.
I noticed on my bootloader screen that I have spl-1.54.0000. I therefor downloaded the file SSPL-Manual-TouchHD.zip and transfered the exe file to my phone memory. I then started it on my phone. It starts the bootloader screen and tells me:
BLAC100 MFG 32M SS-BC
1.07.0liNex XA
MicroP-Blackstone (LED) v6
From hereon I have tried to run USPL but it tells me it cannot connect due to faulty USB drivers which I have updated with the supplied drivers as indicated. Even with a different cable and a different USB port, USPL will not connect.
I have also tried to run the RUU HSPLWrapper_Blackstone_156OliNex.exe but it then starts the screen with the percentage bar and gets stuck. After a few minutes it comes with either error 260 or 262 wicht is an update failure I have read. Just the fix to start over again and reset your systems didn't do anything for me.
Since I know that poeple are able to use this rom I am defenite that it is by my own shortcommings that I can't seem to do it. But after having tried a lot, I can not see what I am doing wrong anymore.
Hope this is a better explenation and thanks sofar already.
Ps: I have tried both USPL3 and USPL5 from http://forum.xda-developers.com/showpost.php?p=3930878&postcount=3. I just can't seem to connect with USPL.
If you run win7 (and vista) x64 especially, loading unsigned drivers for usb doesnt work by default, this might be your problem.
You could try the following, boot you pc and just after the bios is loaded press F8 (or just keep pressing it multiple times) and a menu will appear which includes: "Disable Driver Signature Enforcement" try this, and after boot you should be able to make the usb drivers work, so reinstall them and try uspl (dont forget to not allow usb connections in windows mobile device center)
Hope this helps, if not, move along
RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
I take exception to this. No need to be a smart a**. Obviously jigners was only trying to help, like others before.
If your having difficulty your queries should be directed to the dummies guide thread where people like myself as well as other expereienced users will be more than happy to help you. No need to create a new thread for queries that have been asked umpteen times before.
Thread closed
Hi
I've a big problem!!!
I don't know why i can't instal certain ROM like SuperEclair 2.1 JitHack by Lfd-signed!!!
My G1 is rooted, i've installed Hard SPL
and i've ClockworkMod Recovery (before it was Recovery-RA-Dream)
but i don't know why it can't install!!!
When i install the SPL required, after intallation of the ROM, my smartphone freez on "-T--Mobile- G1" logo
I must root again it
Please HELP!!!
WaveMaster1406 said:
Hi
I've a big problem!!!
I don't know why i can't instal certain ROM like SuperEclair 2.1 JitHack by Lfd-signed!!!
My G1 is rooted, i've installed Hard SPL
and i've ClockworkMod Recovery (before it was Recovery-RA-Dream)
but i don't know why it can't install!!!
When i install the SPL required, after intallation of the ROM, my smartphone freez on "-T--Mobile- G1" logo
I must root again it
Please HELP!!!
Click to expand...
Click to collapse
Oh my goodness.. Your not supposed to keep flashing the spl over again.and you not supposed to flash it over the rom. Once you have the spl flashed, thats it. you dont have to flash it again.Wipe your data, dalvik, and ext partiton. i reccomend installing amon-ra recovery. Once you do that, flash the rom. and reboot.
stick with RA recovery...
and follow the instructions above..
If it's stuck on the G1 screen, then you have a brick my friend. There is still nothing you can do about it, even though some people have been able to unbrick.
mejorguille said:
If it's stuck on the G1 screen, then you have a brick my friend. There is still nothing you can do about it, even though some people have been able to unbrick.
Click to expand...
Click to collapse
Well, there IS something you can do about it. Though, judging from his post, it sounds like he doesn't have the expertise to do so (This is based off of one post however and I could be completely wrong)
I think it's the face
JAguirre1231 said:
Well, there IS something you can do about it. Though, judging from his post, it sounds like he doesn't have the expertise to do so (This is based off of one post however and I could be completely wrong)
Click to expand...
Click to collapse
That's just cruel JA XD bet it's an April fools joke 0o lmfao of course it better not be
I believe I know what he is talking about although I cannot help hiim with his situation. He has not bricked his phone. He is referring to the fact that when he tries to flash certain ROMs it just gets to the G1 logo on the first boot. I am having the same problem on the recent mods of the Supereclair rom I introduced (since 2.2). He can remove his battery and then go into recovery mode to either nandroid back to another ROM or flash a new one (at least, I can )
This doesn't make it any less frustrating with the ROMs that do this however. If anyone knows of a solution to this, I am sure we both would appreciate it.
So he reflashed the Hard SPL in hope of....
unkleremis said:
I believe I know what he is talking about although I cannot help hiim with his situation. He has not bricked his phone. He is referring to the fact that when he tries to flash certain ROMs it just gets to the G1 logo on the first boot. I am having the same problem on the recent mods of the Supereclair rom I introduced (since 2.2). He can remove his battery and then go into recovery mode to either nandroid back to another ROM or flash a new one (at least, I can )
This doesn't make it any less frustrating with the ROMs that do this however. If anyone knows of a solution to this, I am sure we both would appreciate it.
Click to expand...
Click to collapse
Thanx dude! I believe that you understand me very well despite my low level english.
I am French. Understand me guys!
In fact my phone is not bricked (since i can access the SPL and Recovery)
I always use a Super D's ROM.
But the problem is that i can't install some ROMs as SuperEclair 2.1 JitHack by Lfd-signed and many others.
When i try with RA-dream and Hard SPL, i get an error.
And when i try an installation with RA-dream and Haykuro's SPL, the installation proceeds without error, but my phone still planted on the logo "G1".
I must have to restart all again by reflashing with "DREAIMG.nbh", then rooted it.
If anyone has a solution, it will be welcome!
WaveMaster1406 said:
Thanx dude! I believe that you understand me very well despite my low level english.
I am French. Understand me guys!
In fact my phone is not bricked (since i can access the SPL and Recovery)
I always use a Super D's ROM.
But the problem is that i can't install some ROMs as SuperEclair 2.1 JitHack by Lfd-signed and many others.
When i try with RA-dream and Hard SPL, i get an error.
And when i try an installation with RA-dream and Haykuro's SPL, the installation proceeds without error, but my phone still planted on the logo "G1".
I must have to restart all again by reflashing with "DREAIMG.nbh", then rooted it.
If anyone has a solution, it will be welcome!
Click to expand...
Click to collapse
If you read the requirements of most 2.1 roms they will state that you need Haykuro's SPL (aka Danger, Death). Now that you have installed the SPL (and hopefully you have the right radio) reboot back to recovery, wipe your ext partition (preferably ext 3 since not all support ext 4), wipe your data and dalvik-cache, reflash the 2.1 rom, plug it into your computer and run ddms.bat and click to bring up the logcat. If it seems to get to a point where it loops over and over again and your device doesn't boot click cancel and copy the contents of the logcat and post it here. Someone will help you figure it out. Good luck.
Binary100100 said:
If you read the requirements of most 2.1 roms they will state that you need Haykuro's SPL (aka Danger, Death). Now that you have installed the SPL (and hopefully you have the right radio) reboot back to recovery, wipe your ext partition (preferably ext 3 since not all support ext 4), wipe your data and dalvik-cache, reflash the 2.1 rom, plug it into your computer and run ddms.bat and click to bring up the logcat. If it seems to get to a point where it loops over and over again and your device doesn't boot click cancel and copy the contents of the logcat and post it here. Someone will help you figure it out. Good luck.
Click to expand...
Click to collapse
Thanx bro, i'll try it now!
*Bricked G1*
It's GAME OVER for me!
I've only my eyes for cry!!! :'(
WaveMaster1406 said:
*Bricked G1*
It's GAME OVER for me!
I've only my eyes for cry!!! :'(
Click to expand...
Click to collapse
What did you do? :S
protomanez said:
What did you do? :S
Click to expand...
Click to collapse
I've flashed my SPL to Danger SPL and my Recovery to RA-dream.
and i've forgot to upgrade my radio to 2.22.19.26I first.
Now this is my result: G1 frozen on "G1" logo and wont go to Bootloader or Recovery!!!!
It's over for me!!!
WaveMaster1406 said:
*Bricked G1*
It's GAME OVER for me!
I've only my eyes for cry!!! :'(
Click to expand...
Click to collapse
I guess you didn't read this part of what I said:
"Now that you have installed the SPL (and hopefully you have the right radio)..."
I'm sorry that you bricked your phone. Look at the bright side:
G1 phones are getting cheap (REAL CHEAP)
Depending on how long you had it you can upgrade to another device (WARNING: No full custom roms for the new mytouch yet)
I know that it's not much of a bright side but hey what else can you do.
Possibly purchase a G1 online with a cracked screen and swap out either the screen/digitizer or the motherboard of the two devices. Worth a shot.
Bro thank you for your compassion! (YES)
It's like a balm that you put me on the heart, because it really hurts to lose something that you really consider!
But know that I did not do it on purpose. I simply forgot to upgrade the radio after having downgraded it(I reflash it with DREAIM.nbh), and I flashed the SPL (Danger SPL)!
So I was euphoric!!!
That I was stupid!!!
Thank you for your advice, but I think I'll opt for a Magic or a Hero
until I have enough to buy a Nexus One!
Life goes on ...
WaveMaster1406 said:
Thanx dude! I believe that you understand me very well despite my low level english.
I am French. Understand me guys!
In fact my phone is not bricked (since i can access the SPL and Recovery)
I always use a Super D's ROM.
But the problem is that i can't install some ROMs as SuperEclair 2.1 JitHack by Lfd-signed and many others.
When i try with RA-dream and Hard SPL, i get an error.
And when i try an installation with RA-dream and Haykuro's SPL, the installation proceeds without error, but my phone still planted on the logo "G1".
I must have to restart all again by reflashing with "DREAIMG.nbh", then rooted it.
If anyone has a solution, it will be welcome!
Click to expand...
Click to collapse
Salut a toi
As tu lut mon dernier post sur SPF ?
have you see my last post on the SPF ?
see you
lefeudedieu said:
Salut a toi
As tu lut mon dernier post sur SPF ?
have you see my last post on the SPF ?
see you
Click to expand...
Click to collapse
I can't retrieve this topic on SPF!!
je ne retrouve pas ton sujet sur SPF
My brother installed a tpc elite rom V11 on my kaiser a while back.
And it caused my kaiser not to want to go to bootloader anymore.
Now I really need to be able to get into bootloader again with hardware
keys, instead of the pc.
This is essential due I want to flash android on nand, but it needs bootloader.
This bootloader can't be opened at this moment.
I read on the internet alot of people had problems with this "tpc elite rom".
If I had known it would **** up my bootloader I wouldn't have flashe dit.
I couldn't find any solutions for this problem. . Anyone else knowing what to do?
I am affraid that when I reflash hardspl it will hang or something. And I couldn;t find the latest hardspl, the faq and the newb flash topic is outdated...
Ok, I installed hardspb 3.34.
Still no luck into getting into bootloader with hardware keys.
I tried the two softbuttons, and I tried the camera+power button
Also I tried the camera+softbutton with stylus way.
No luck , tpc image keeps coming up.
axe_1337 said:
My brother installed a tpc elite rom V11 on my kaiser a while back.
And it caused my kaiser not to want to go to bootloader anymore.
Now I really need to be able to get into bootloader again with hardware
keys, instead of the pc.
This is essential due I want to flash android on nand, but it needs bootloader.
This bootloader can't be opened at this moment.
I read on the internet alot of people had problems with this "tpc elite rom".
If I had known it would **** up my bootloader I wouldn't have flashe dit.
I couldn't find any solutions for this problem. . Anyone else knowing what to do?
I am affraid that when I reflash hardspl it will hang or something. And I couldn;t find the latest hardspl, the faq and the newb flash topic is outdated...
Click to expand...
Click to collapse
axe_1337 said:
Ok, I installed hardspb 3.34.
Still no luck into getting into bootloader with hardware keys.
I tried the two softbuttons, and I tried the camera+power button
Also I tried the camera+softbutton with stylus way.
No luck , tpc image keeps coming up.
Click to expand...
Click to collapse
No1 here with a solution for me?? I really need one.
Try .cab attached will be under tools in start menu.
stylez said:
Try .cab attached will be under tools in start menu.
Click to expand...
Click to collapse
Thanks ,
Although it looks kinda usefull, I need to be able to enter bootloader without beeing able to start windows mobile.
I am thinking of switching to NAND android. To install or reinstall I would require the bootloader, or wouldn't I?
stylez, i need this file for Androis System
Any other way to restore the key combination so I can enter the bootloader with the hardware keys again?
axe_1337 said:
Any other way to restore the key combination so I can enter the bootloader with the hardware keys again?
Click to expand...
Click to collapse
Anyone? I really need to get this working .