Related
I was trying to flash my trinity but i am having problems,
I can get the phone into the bootloader mode without any problems
and the software see the phone ok but the update only gets 1% before it fails with "error 270 image is corrupt" i have tried many different image but the same occurs with them all.
My phone now only goes to the splash screen
is there any think i can do?
take a look at this thread, it may help you unbrick your Trinity...
thanks but no , my phone is not stuck in the bootloader just will not flash
Go HERE they might have a solution there!
Please don't double post! It will not give you a solution twice as fast
Hi. I had the same issue and solved it. feel free to send a MP if you still need help
Thanks still can not get working.. sent a pm to tonio94 thanks mate
Error 270
Hi m8,
Your error 270 is because your phone is still locked and the ROM(s) you are trying to flash are not natively signed for use on your particular phone!
You can either...
1. Pay to get your phone unlocked
2. Set your phone with Hard-SPL (see the related sticky on this very Forum)
3. Extract the .nbh file from the ROM you are trying to flash and flash it using the SoftSPL (SSPL) - again see the sticky on this very Forum.
Not being funny, but you really must do a bit of background reading before you start messing with these new ROM's on your phone.
I hope this helps - PM me if you need more detail.
Moz.
Same problem
Hello,
I've followed the thread to unlock cid/sim my 3600, but I can't upgrade nothing. I can't upgrade hardspl to.
With all roms, the phone stay on tricolor screen after "Yes" to allow enterbootloader.exe, and the rom tell me that the device is not connected.
Active sync was ok, the phone battery to.
Help?
I've 1.23.406 rom actually, and spl 1.07 ds.
EDIT: I've the soluce. I use the SSPL-TRIN for each upgrade, before the hard spl, before passing in 1.41, et now before the ROM, and it runs!!
I had not understood the thread about sspl-trin to bypass, so I didn't use properly.
Now it's ok...
I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!
wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...
Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...
Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more
thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo
fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help
I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk
Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome
I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb
I start up my boot loader(the tricolored screen) then i connect my usb(says usb connected on bottom left) then i run my RUU. Every time i do this it either says error or invalid tool. Does anyone know what the problem here is or can anyone help me figure out why i can't flash???? I am currently trying to flash a p4300/wizard 8125 and is unlocked.
You need the RUU_noID to flash another ROM. Try and flash the Wizard_Love ROM and see if it boots up
i flashed it with wizard_love rom but it loads really....reallly.....really..... slow so slow i cant really do anything with it and the screen has these lines running horizontally. what do i do now?
BootLoader came up but can not flash
Hello all experts. Sorry, i didn't mean to hi-jack this thread, but it seems i have similiar problem with this. I can get my Tmobile MDA into boot loader (tri-color) when i plug in the the PC the USB appeared on the lower left conner of the MDA. but i can not do anything beyond that. I tried to flash to original shipped ROM from Tmobile, but it won't recognize the the phone, i tried love ROM, same thing......i've read many threads and tried many diffirent methods from other poeple, but still not get the phone recognize the phone. Any help would be appreciated
BTW. the boot loader says
SPL 308
IPL 308
I used bottom row to solve this problem
nskhan said:
I used bottom row to solve this problem
Click to expand...
Click to collapse
Please explain what 'I used bottom row to solve this problem.' What is or where is 'bottom row?'
Thank you.
Tonis said:
Please explain what 'I used bottom row to solve this problem.' What is or where is 'bottom row?'
Thank you.
Click to expand...
Click to collapse
Its not 'bottom row' but "Button's Rom 1.05" and you can find it in 'Definitive unlocking guide' by Dr.Putts in the 'Wizard Upgrading Forum'. or from this link :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Cheers!
DarkForcesTeam SSPL for HTC Photon (Mini)
SSPL allows you to flash custom [not-signed] OS or/and ignore CID check.
How safe is it?
We disabled SPL and Radio flashing, so it can only flash Splashes and OS images.
(To all hackers out there... don’t enable it! else you will BRICK your device)
Worst case is that you destroy your OS partition, in that case you must flash a ship ROM using the original SPL (Vol down on boot run ruu from PC )
We did our best to make it save, else we would not release it for public testing, but anyway, all on your own risk!
How to use it:
Download the SSPL_RUU.exe and put it into an empty folder
Add the RUU_signed.nbh that you want to flash to your device into the same folder
Connect the device to the PC, device must be running WM, not show the 3 color screen
Run SSPL_RUU.exe
Troubleshooting:
If you don’t see USB at the bottom of the device screen and the ruu showed a connection error, disconnect the device and connect it again... USB should be there now.
Then just run the SSPL_RUU.exe again, flashing will start now
If the flashing breaks before 100%, stay cool! ... Reset the device and go to Boot loader, then flash a ship rom to the device (Must be the right rom, with the right CID)
Don’t forget to report that it happened... after you flashed the original ROM back, you can try again.
It is possible, that sometimes the screen stays black for 15sec or more before the SSPL 3 color screen shows, if it takes too long, do reset and try again and please report that!!!!
"Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center", !!! Problem NOT related to this SSPL !!! ... this means that you flashed a region protected rom... flash back to a ship ROM for your device and stick to ROMs with your region ID... or patch them
(You might have to remove the battery after flashing back, else it might not boot up)
Disclaimer:
This product is free to use, but at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties of any kind are given.
We have tested our product on several devices and have not
found any problems with it.
What about HSPL? HSPL will be soon
DFT team 2010.
well done bro
Tom
Excellent news! Thank you for the work and dedication.
Best Regards,
Xavier Soares
Thanks a lot for the work you've done, now I have my Mini with the last 1.32 ROM in English
Cheers
No problems during flashing btw, everything went fast and smooth. I did it under Windows 7 Ultimate x64 while I was browsing the internet and listening to some music
Thank you for the work.
Best Regards, 100-40
Thanks alot for the good work im flashing it now & its on 15% & everything is going well thanks alot guys for the god work you've done
nice job
wow! thanks a lot, will do so tomorrow!
Thank you very much for your sharing!
I hope HSPL coming soon!
SSPL
Very good job !!!!
Cotulla said:
DarkForcesTeam SSPL for HTC Photon (Mini)
SSPL allows you to flash custom [not-signed] OS or/and ignore CID check.....etc...etc
What about HSPL? HSPL will be soon
DFT team 2010.
Click to expand...
Click to collapse
This is a great news!!!
...not bad the SSPL
NitroNitrous said:
Thanks a lot for the work you've done, now I have my Mini with the last 1.32 ROM in English
Cheers
No problems during flashing btw, everything went fast and smooth. I did it under Windows 7 Ultimate x64 while I was browsing the internet and listening to some music
Click to expand...
Click to collapse
Have you generated the gold card with? Do I need it right?
rigo007 said:
Have you generated the gold card with? Do I need it right?
Click to expand...
Click to collapse
No, you don't need a gold car with this method. Just follow the instructions and everything will be fine
If this sspl allow us to flash custom roms, then what will the hspl allow us to do?
one hint: i think you need admin rights. i normally work without and ran into connection troubles. but this is no issue on sspl since i ran into connection troubles with the official ringtone update as well.
running the sspl with admin-rights worked very well for me. Thanks a lot!
N3XuS.eXe said:
If this sspl allow us to flash custom roms, then what will the hspl allow us to do?
Click to expand...
Click to collapse
To flash custom radios
Thank you very much!
I flashed my italian (1.07.408.1) HTC Hd mini with the European version (1.32.401.2).
Following the instructions I wasn't able but I've tried several time (even with the 3 color screen and without the SSPL was able to get the current ROM) and i had success. Cheers.
Open file Error
the zip file only contains a file: "DFT_SSPL_MINI.exe", and I have error of "Can not open the requested file ..."
need I also download something else to run with this exe?
thanks
hi all,
works perfectly, thanks
greatz,
Rudie
zengyee said:
the zip file only contains a file: "DFT_SSPL_MINI.exe", and I have error of "Can not open the requested file ..."
need I also download something else to run with this exe?
Click to expand...
Click to collapse
you need download the rom file (*.nbh), and put it into the same dir as "dft_sspl_mini.exe".
Hello,
I tried flashing this ROM. Something went wrong, not quite remember what - I think it was the verification.
As a result (I had to wipe before installing), my screen got stuck on the G1 screen. I followed these instructions, and installed the linked DREAIMG-RC29.zip. When I rebooted my phone, I was asked to sign in to my Google account, an operation which failed because I'm not on an Internet plan (3G).
I tried installing other ROMs but they all failed for one reason or another - mostly verification issues. I have no idea why, I've rooted my phone and everything.
In any case, I'd like to use a newer version of Android whatsoever, so logging in isn't really the problem (although right now it is because I cannot use the phone).
Thank you for your help.
Sound like you are not rooted yet. You cannot flash custom ROM if you are not rooted. Follow the instruction from the link below and your G1 will be rooted flashed with your custom ROM:
http://forum.xda-developers.com/showthread.php?t=1098899
BeenAndroidized said:
Sound like you are not rooted yet. You cannot flash custom ROM if you are not rooted. Follow the instruction from the link below and your G1 will be rooted flashed with your custom ROM:
http://forum.xda-developers.com/showthread.php?t=1098899
Click to expand...
Click to collapse
Hi,
Thanks for the answer.
Sadly I got stuck at the very first stage:
1. Power on phone via fastboot (camera+power) wait for it to ask if you want to apply update and agree, wait for it to finish.. now power off device.
Click to expand...
Click to collapse
It shows the red-green-blue-white screen, then turns grey, "Checking" => "Not allow" and then back to the red-green-blue-white.
Edit: Well, if I don't do that, I can still install update.zip (step 2). Then I'm stuck in the same problem (can't sign in Google). Tried looking in the "2~By-pass Google sign-in" but I don't really understand what's going on; how to get that ADB and what do I do then?
ronash said:
It shows the red-green-blue-white screen, then turns grey, "Checking" => "Not allow" and then back to the red-green-blue-white.
Click to expand...
Click to collapse
What version G1 do you have? UK or US or other?
BeenAndroidized said:
What version G1 do you have? UK or US or other?
Click to expand...
Click to collapse
It was bought in China but I think it's German (the keyboard is Qwartz, I have ß over the s etc.).
AHHHH! I see, here you go follow these steps in this post.
http://forum.xda-developers.com/showthread.php?t=485364
BeenAndroidized said:
AHHHH! I see, here you go follow these steps in this post.
http://forum.xda-developers.com/showthread.php?t=485364
Click to expand...
Click to collapse
Thanks for the find but I'm afraid it doesn't work either :\
It gets stuck at the "Click "Get SD Card Serial from WINCE Device"" step, the program just stops working. :\
Well, I think I've made some progress, realizing that one of the steps I've done trying to fix the pgone must have unrooted it. I couldn't find a way to root it back as I cannot bypass the log in phase. Can anybody please help me with that?
Yes, when you did that you just unrooted your G1.
BeenAndroidized said:
http://forum.xda-developers.com/showthread.php?t=1098899
Click to expand...
Click to collapse
Use this guide that I suggest earlier, use the step for bypass google sign in.
BeenAndroidized said:
Yes, when you did that you just unrooted your G1.
Use this guide that I suggest earlier, use the step for bypass google sign in.
Click to expand...
Click to collapse
Sorry if I'm being a nagger, but I can't get it to work either.
I'm stuck in the very first step:
1. Power on phone via fastboot (camera+power) wait for it to ask if you want to apply update and agree, wait for it to finish.. now power off device.
Click to expand...
Click to collapse
When I power it via fastboot, I get the rgb screen, then grey, and it goes "Loading..." => "Checking..." => "Not allow". What does it mean?
Thanks a lot for your help!
ronash said:
Sorry if I'm being a nagger, but I can't get it to work either.
I'm stuck in the very first step:
When I power it via fastboot, I get the rgb screen, then grey, and it goes "Loading..." => "Checking..." => "Not allow". What does it mean?
Thanks a lot for your help!
Click to expand...
Click to collapse
You are starting up your phone in "flash-mode" (power + cam) and you have a *.nbh file on your SD-card -> flashing of this nbh file is started when powering up the phone, but ... you do not have a goldcard or a wrongly signed *.nbh file, so flashing is interrupted.
You need a Goldcard to flash a different ROM on your phone when you are not rooted resp. do not have a SPL on your phone which accepts ROMs signed with test keys.
Could you please explain a bit further on? I don't know what a Goldcard is and can't find a good answer online.
Dankeschön!
You cannot find informations about a Goldcard? You may have a look at Goldcard.
If you have concrete questions, pm me.