Database Develop

SSPL (or flashing any ROM 4 free)

This tool allow to flash your Trinity ROM bypassing CID and signature(*) check.
For flashing ROM copy SSPL-TRIN.exe to your device and run it. Standart bootloader prompt should appear on screen, check SPL version number: if it ends with ".ds" then everything is fine. (Re)attach usb cable and run firmware update utility.
In case if something goes wrong during flashing you should flash your device with ROM accepted by standard bootloader (and have another try if you wish).
(*) code must be formally signed i.e. contain properly-formated signatures on their places, however no checking are performed against them. Actualy unsigned code flashing was tested by flashing original signed nbh image with few bytes in header and extrom section modified, but patches were designed to accept any properly formatted crap as a valid signature.
See readme.txt for more info
Русскоязычное обсуждение здесь
If you feel yourself as an advanced user and going to do things more complex than described above - read readme.txt before doing them !

Hermes version here: http://forum.xda-developers.com/showthread.php?t=293651

let me be the first one to Thank you for this free unlocker! it works!

super thanks.

torquefever said:
let me be the first one to Thank you for this free unlocker! it works!
Click to expand...
Click to collapse
Is that true ?

The Trinity update bypass works perfectly.
As for hermes i cannot test that one.
A minor thing i noticed that it doesn't return the current rom version to the romupdateutility just says "".
Great work

eddietse said:
Is that true ?
Click to expand...
Click to collapse
if you are asking 'bout trinity then yes. If 'bout hermes then I wanna know in too but I'm 90% shure that there would be no surprise. Anyway (please don't treat this as official acceptance of responsibility ) chance of bricking device is immeasurably low: in the wrost case SPL simply hangs unstarted (you could't do anything wrong in this case).
Wire64 said:
A minor thing i noticed that it doesn't return the current rom version to the romupdateutility just says "".
Click to expand...
Click to collapse
Afaik version number is retrieved by RUUGetInfo.exe started from CE. And you won't get this when you are starting your flashing on device already in SPL service mode (even with normal SPL).

thx
I m waiting so long time
u are the best

works perfect on HERMES
Thanks for your great tool Des! You are the best!

@pof thanks for reply.
Do we need such tool running on another devices (list please) ?

Des said:
if you are asking 'bout trinity then yes. If 'bout hermes then I wanna know in too but I'm 90% shure that there would be no surprise. Anyway (please don't treat this as official acceptance of responsibility ) chance of bricking device is immeasurably low: in the wrost case SPL simply hangs unstarted (you could't do anything wrong in this case).
Afaik version number is retrieved by RUUGetInfo.exe started from CE. And you won't get this when you are starting your flashing on device already in SPL service mode (even with normal SPL).
Click to expand...
Click to collapse
Thank's for your reply
is that means I can flash the Now GPS Rom on my D810 ?

eddietse said:
Thank's for your reply is that means I can flash the Now GPS Rom on my D810 ?
Click to expand...
Click to collapse
Maybe I'm too rude person, but why don't you simply try it yourself (and report the result) ?

Thank you!
As far as I understand, this will allow for flashing of any "cooked" firmware to above mentioned devices and some others..
Well, I have got few devices here ( as per my signature). Please let me know if more testing is required.

SecureGSM said:
this will allow for flashing of any "cooked" firmware to above mentioned devices and some others.
Click to expand...
Click to collapse
Yes it should. Have neither time nor expirence on cooking modern devices firmware (dump/restoreimgfs version that I have don't work on Trinity rom and I have no will to make it working unless forced to) so flashing realy "cooked" rom was not tested. But as mentioned above I was able to successfully flash original rom with some bytes modified and from signatures point of view this makes no difference with cooked ROM.

Noted. Thanks for your efforts.

Not at all. And I hope that ability to flash unsigned code to any device would create demand for rom cooking toolchain and it would be (if it havn't already) develoed to support newer roms.

Great...... work Des
but what do you think it is better to do that method;
or the first payed method; (ssid)
what the diferent's betwen the payed method;
if somebody have a supersid device can use that;
Thanks for your great work.....

Great!!!!!!!!!!
Thanks a lot !!

Thank you very much, And my Hong Kong version D810 can use
Taiwan GPS Rom now (with T. Chinese)

Des said:
@pof thanks for reply.
Do we need such tool running on another devices (list please) ?
Click to expand...
Click to collapse
HTC Breeze smartphone should be a good candidate, as it should be very similar to hermes & trinity.
Also you can try on Artemis, but artemis uses DOC and is quite a different platform.
I really give you many thanks for this great work and effort

P3600i Flashing Tutorial

OK first of all I've put this together hastily so forgive me for slight errors, but most of this should be fine.
To flash your P3600i, there are 3 things that should concern you: HardSPL, the Radio, and the ROM.
HardSPL: something that allows you to run unsigned code on your phone (e.g. ROMs), and also provides protection in case it screws up. This is the first thing you do. (This is probably a **** explanation, but functional at least?)
Radio: I guess more like a mini feature set, I know there was something similar when I had a Motorola phone which was called a flex. In this case it's not a whole new operating system, but perhaps easily thought of as small tweaks made to improve the system without necessitating a whole ROM flash. Why have a radio when a ROM could take care of everything? Well the advantage of a radio is that you can flash these without resetting everything. Everything (contacts, etc.) remain intact.
ROM: What you're really after, WM6.1 and the lovely cooked ROMs that should soon be available for flashing. This will wipe everything on your phone, so back your stuff up (contacts, settings, owner info, messages, etc.).
Flashing procedure:
IF YOU HAVE VISTA: You need to update your drivers. Go here for instructions. You can then proceed with the procedure as per normal.
The basic procedure is this. Flash HardSPL first, then update your Radio, then finally, your ROM.
Note: The HardSPL you use is a modified one especially for the P3600i. Get it here.
Note2: Here is a mirror for the latest Radio for the P3600i. From following the guides, you will know when to use it. Get it here. (N.B. Radio link updated to v1.56.70.11 - 2 Aug 2008)
Go to the trinityguides.info guide (link here) and go through the procedure - and yes, I know the link points to page 2 of the guide.
NOTE WHEN FLASHING HARDSPL, IT WON'T WORK THE FIRST TIME - YOU WILL GET AN ERROR (CODE 260) LOLOL. THIS IS EXPECTED.
This is what happens.
You go to flash HardSPL like the guide says. LOOK AT THE SCREEN ON YOUR PHONE, YOU MIGHT HAVE SECURITY PERMISSIONS AND NEED TO MANUALLY ALLOW THE PROGRAMS TO RUN.
It looks like it's about to flash and then errors. BUT your phone is on the 3-colour bootloader screen! How odd. Well KEEP YOUR PHONE ON THE BOOTLOADER SCREEN, and unplug it from your computer. Exit the HardSPL program, RUN IT AGAIN, and FLASH THE PHONE AGAIN WITH HARDSPL (obviously connect your phone and stuff back to your PC).
The point here is this: the first time it will fail, but at least manage to get the bootloader up. With this bootloader up, exit the flashing program, restart it, and then you should be able to run the flashing program and have it complete.
DOUBLE CHECK YOUR PHONE HAS THE OLIPRO HARDSPL INSTALLED after completion, by soft-resetting (hold the power and camera buttons at the same time AND use the stylus to press the putton at the bottom of the phone. You might not get it the first time, but with practice you'll get the hang of it).
Once you can see 3.20 Olipro (yes, 3.20) on the bootloader screen, you know you have HardSPL on fine, and can proceed to the trinityguides.info instructions on flashing your radio and ROM. ROMs can be found in the P3600i ROM Collection thread, here.
Hopefully this should answer a lot of questions people have

Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o

o_sing_o said:
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
Click to expand...
Click to collapse
Simple answer is no. You should be able to flash Hard SPL from Vista if you follow the Trinitty guides to change the USB drivers to the XP ones.....PLEASE read the TRINITY GUIDES as stated above.

about the vista problem ... take a look: http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66

should i download the hard spl from here?
http://forum.xda-developers.com/showthread.php?t=398742
and what radio should i put? be specific...
Thanks

whatever radio you feel like, jesus, the level of stupidity just gets worse.
of course, if you're totally ****ing incapable of independent thought, we can spoonfeed you some arbitrary radio version.

Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.

gallevy said:
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
Click to expand...
Click to collapse
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol

Andych said:
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Click to expand...
Click to collapse
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?

gallevy said:
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
Click to expand...
Click to collapse
Use the Hard SPL from the link...that is THE only one that works.
Radio 1.46.30 was the standard Radio and I now have 1.50.08.11
Check out the radios etc here http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3
and choose the one that suits.

woot it works! thanks

zero_1984 said:
woot it works! thanks
Click to expand...
Click to collapse
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while

joncgde2 said:
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
Click to expand...
Click to collapse
great to hear. the rom seems to be fairly stable, and its nice and quick. which for me personally is what i want in a phone
one thing i should mention to people as well running vista to do this is that for every part of flashing the phone, vista may attempt and succeed in "installing device drivers" which in turn means you need to point it to the vista-compatible drivers for it to work (as per the guide) every time to progress to the next part, otherwise a 260 keeps occuring.

Thank you for your wonderful and useful guide!
Thank you!
200% hype abt flashing! Finally!

Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL

genipao said:
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
Click to expand...
Click to collapse
If you have a P3600i then according to the info you have above....you downloaded the WRONG Hard SPL.
Go back to the very first post on this thread and read it carefully. There is a link there to the correct Hard SPL from Olipro...and it isn't 130, 120 or Des Crash Proof.

genipao, it was rather surprise you had picked the wrong hard spl and doing some mix and match and it still work?

All experts,
please render help to me for my CHT9110 (P3600i - IPL-Trin100, SPL-3.03.0000, CPU-Samsung 500Mhz, NAND-256MB) that I flashed successfully with hardSPL 3.10 Oplira. this is working and wonderful SPL with the JumpSPL included. Good job done by Oplira!
However when I tried to upgrade P3600i from WM6.0 to WM6.1, I missed the step to tag 401 from 400 when I re-build New_NBH.file for my phone. At a result, I encounterd WM6.1 ROM flashing incomplete at 80% and forced to reset due to hang-up...
Now, my P3600i still can boot up to flash-screen logo, loading radio image (1.56.70.11) and then protocal services (32.89.7020.20H), then it will hand-up forever on flash screen logo.... (until i did the hard reset, then it will re-boot! terrible now!!)
i suspected it was unable to locate the WM6.1 and loading up accordingly....
I tried out many option, to downgrade SPL 1.1, SPL1.2, SPL 2.1 and used SPLxploit to clear the stack in bootloader... all is falied and my bootloader still shown SPL-3.03.0000 and don't allow to re-flash any ROM under bootloader mode now!!
Experts! please assist me,
How can I roll-back the default OS on phone if any? or there is alternative way to recover OS to flash in for recovery? I think firstly we need to crack SPL-3.03.000 in bootloader mode...
Many thanks!

Hi klemtest,
can you guide me on flashing CHT9110?
I couldnt seems to get it flash even after following the instruction.
Appreciate your help

i just followed Ajajaj Quoted, please allow me to share...
Step 1 - Anyway First of all, load the Hard SPL to your phone from : Set
<Klemtest>
Step 1.1 - go and download Hard-SPL-p3600i-V1.1.zip (810.6 KB, 438 views)
Step 1.2 - extract SPL-p3600i-V1.1.zip file onto your local drive
Step 1.3 - connect P3600i via USB, ensure you are under ACTIVESYNC mode in WindowXP (if you use Windows Vista, the you need Vista driver for detecting HTC phone at USB)
Step 1.4 - execute the ROMupdateutility from SPL-p3600i-v1.1 folder, ensure there is RUU_signed.nbh file available, otherwise the utility will prompt u for read file error.
Step 1.5 - once it executed, follows the instruction given from ROMupdateutility screen, until you see the progress bar show up, meanwhile u will notice that p3600i phone will prompt you for ROM upgrading message, click "Yes" to accept and proceed. Sequence pop-up message will be asked again in p3600i for using JumpSPL.exe to unlock CID,
Again click "Yes" to accept and proceed. ROMUpdateutility will complete 100% and your p3600i display will be turned to SPL-3.10 Oplira in bootloader mode now (if the ROMupdateUtility indicated there is update error, just ignore it and exit utility screen)
don't switch off your p3600i, let it continue showing SPL-3.10 Oplira in bootloader display.
Dude! you're now ready for step2 to flashing your favor WM6.0 / WM6.1 once you manage the "nbh" file which I didn't done it properly!!
So, I assumed you have downloaded the working ROM and extract them in local folder as stated in Step-2
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Due to p3600i is manufactured with 256 NAND, memory address for storing "OS.nb" slightly difference compared to p3600 (CHT9100) with 128 MB RAM.
Hence, ajajaj advice to use ROMBaker.exe to exract "XX_OS.nb" your favor OS ROM (usually named as RUU_signed.nbh) that you downloaded and re-build it using NBHGEN.exe.
All this stuff is available here Custom RUU tools
In this case, 2 screens captured below showing u how to distingish it
(for wrong re-build of OS.nb at 400)
C:> NBHGEN.exe new_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
400,06_OS.nb
(for correct re-build of OS.nb at 401)
C:> NBHGEN.exe correct_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
401,06_OS.nb
you can follow the step below until step9 if you're not familar of using custom RUU tools:
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
<Klemtest>
Step-10 - after you have managed to get re-build RUU_Signed.nbh file by yourself. you can proceed last stage for completion.
As I mentioned, you continue keep your bootloader screen at SPL-3.10 Oplira just now. launch again RUUupdateutility.exe
Note: At this point, your personal data from the phone will be destroy, please make sure you back-up all data before regret and ensure ActiveSync is disable during execution the flashing.
Screen1 - On the Welcome Screen, click Next to begin the ROM update installation.
Screen2 - On the next screen, follow the listed instructions in the dialog box first. When you are done, click Next to proceed.
Note: Ignore the instructions listed due to you are flashing via bootloader mode, and ActiveSync is disable.
Screen3 - The following message will then be displayed, indicating that the utility is verifying and acquiring information about the device as preparation for the update process. Wait for this verification process to finish.
Screen4 - Below the device information, information about the new ROM update will then be displayed. If you are certain that you want to install the phone with the new ROM update, click Next to proceed.
Screen5 - confirmation message then appears and shows the length of time it will take to copy the necessary files (including radio image) to the device. Click Next to begin the update.
Screen6 - A progress bar will run through the screen during the update process.
Note: In the middle of the update process, the progress bar may stop running. This is normal as the RUU is adjusting itself to complete the update process automatically. (probably will take up 10 minutes)
6. When you see the screen shown CONGRATULATION message! means update is complete. Click Finish to exit the utility. Otherwise, you will have trouble now to troubleshoot per below steps!
GOOD LUCK and happy computing!
Troubleshooting and Error Recovery

[TUT][HSPL] Hard-SPL Unlocker for Blackstone - Released for 1.56 ROMs too now

MOD EDIT HDuser 02/01/09
This page has gone wiki and can be found here.
For a better understanding it is recommended that you read all 3 parts under "Flashing - Changing your device to a new version or language" on the main wiki page found here
END MOD EDIT
so, yeah, why not do one for this device too
[size=+3]UPDATE: Hard-SPL released![/size]
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
[size=+2]23/04/09 -
UPDATE: New version will work on SPL 1.54 or above ROMS!!!! [/size]
so I of course changed the 1.56 rom wiki accordingly to that. (someone can review it if they want)
many thanks to testers for testing!
[size=+1]Donations are always appreciated to the big link in our signature ("elite project"). Thank you!![/size]
Preparations:
0) this package is for Blackstone devices. for any BLAC***** now (SSPL loader checks this).
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
read this if unsure how to install Hard-SPL...
1) download Hard-SPL package from attachment, use 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip ) if you want to use new 1.5x ROMs. then extract to an empty folder.
NOTE: 1.14 HSPL (the original Unsigned_HardSPL_for_Blackstone_OliNex.zip) is good for only older ROMs, 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip) is good for newer ROMs. 1.56 is not backwards compatible with old ROMs. the incompatible ROM will still boot but screen is going to look funny which is a temporary issue but uncomfortable.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) run HardSPLWrapper_Blackstone.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is recommended,
4) follow steps in the RUU, check device for prompts after PC shows loading bar, press Yes on phone if asked. please answer with Yes as fast as you can!
5) some notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
6) device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
7) in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
8) SPL flashes, device automatically reboots, job done.
9) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.14.OliNex or for new version 1.56.OliNex, which is the Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is sayingn 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
*important*: make sure that the USB cable is plugged in and device is synced to Windows Mobile even if doing manual SSPL method.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or blackstone customRUU if you need to flash cooked ROM.
NOTE 5: for developers asking: Hard-SPL is not based on MFG SPL, as that SPL causes the screen not to turn on after a resume. (maybe solved one day ). so currently, MFG SPL can strictly be used for development and hacking.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
nothing happens on the device, does not enter tricolour screen mode anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is showing 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
general usb connection error problems if you get connection error in RUU after the device goes to 1.07.Olinex screen, then
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but HD still says "USB" on the tricolour screen, just leave it there and re-run the RUU when driver installation finishes.
- finally, you can try disabling antivirus or firewall programs on the PC.
HD specific USB or connection errors:
- as already said, in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait 5 minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process from step 1.
- alternatively, launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC.
other issues if SSPL-Manual.exe or Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package from this post. (currently 1.13, 1.14, 1.15, 1.54)
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.

[EDIT 17-12]
Congrats on releasing this HSPL.
Now the cooking and flashing can begin.
[/edit]

the-equinoxe said:
[SIZE=+2]MOD BREAK[/SIZE][SIZE=+2]
[/SIZE]
As you all may have noticed the thread has been cleaned up.
From now on: keep it clean, stop begging, no whining.
Yes the HSPL will be released, yes it will be free.
[SIZE=+2]Warning: those who leak the testversion will be banned, no exeptions![/SIZE]
Click to expand...
Click to collapse
Nicely put. I see no reason to beg but then again I don't have the phone... yet. I know you must hate that begging crap more than anyone. I was right there with you when you developed the Wizard HardSPL remember?
Anyways keep up the great work OliNex! I can't wait until I have this phone!

dharvey4651 said:
Nicely put. I see no reason to beg but then again I don't have the phone... yet. I know you must hate that begging crap more than anyone. I was right there with you when you developed the Wizard HardSPL remember?
Anyways keep up the great work OliNex! I can't wait until I have this phone!
Click to expand...
Click to collapse
Don't have this phone either, but like you (and most seniors) I do respect the efforts of Olipro and Cmonex (and alike).
They have contributed a lot for our community.
BTW. The honour for the Wizard HSPL goes to Olipro (as always), it was his patching that made the thing work (who's else )

Neh, i'll wait for the public release. I've seen enough horrible failures with HTC devices already when alpha testing
Good job cmonex and Olipro!

have HTC Blackstone SPA firmware to test... waiting for HSPL !

Olipro and Cmonex: the best!

Thanks to all mods
Congrats to all moderators who are doing fantastic jobs, dont have the phone yet but thanks guys, U all rocks

Yeah finally!!
Let the tests go fine and the flashes begin!
Great job man, many thanks!
Cheers.

Waiting patiently for the public release as well. Great job guys, once this gets wrapped up a world of rom cooking will open for the already great HD.

Thanks, please do let us know if we can be of any help!

Guys
Now it is time for you to do some work while you wait.
The good news is that I have enough details to write the wiki page.
The bad news is that I am going to bed.
The worst news is that I have requested that the application not be realesed untill the site is prepered for that.
So you all have a few choices, sit and wait, do nothing and complain.
or
Help us help you.
This is what I need
----------------- 1 -----------------------
one the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
I need somebody to
1) opne the page, add there name in it under ??? on the top line
2) Save the page so that nobody mess with you
3) Check for spelling
4) Check it is readable and understandable
5) Check the content that it is nobb proof.
6) Correct what needs to be corrected.
7) Remove the first commnet
8) Post in this thread that it has been done (so that I know about it)
------------------ 2 ---------------------
On the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_BLackstone_Flash2
I need sombody to extract that shp.exe and follow the outline that I have placed.
Look at how I formated the first page when it came to the files.
I will pick it up some other time.
I also am lost for words on the HSPL issue, need sobody toexplain it.
------------------ 3 ------------------------
We need to update the roms as people will want them
here is what I wrote on that subject
http://forum.xda-developers.com/showpost.php?p=3037840&postcount=4
the WIKI page that needs updating is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Also one needs to check the forum for theads as a few other roms have poped up.
--------
So guys, help us to help you and let some of us with day jobs go to bed.
Thanks

And guys
Please lets use the thread to check what has been done as I don't want to read through 18 pages of "I am waiting" to read about what has not been done.
Like I said, help us help you.

HDUser said:
Guys
Now it is time for you to do some work while you wait.
The good news is that I have enough details to write the wiki page.
The bad news is that I am going to bed.
The worst news is that I have requested that the application not be realesed untill the site is prepered for that.
So you all have a few choices, sit and wait, do nothing and complain.
or
Help us help you.
This is what I need
----------------- 1 -----------------------
one the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
I need somebody to
1) opne the page, add there name in it under ??? on the top line
2) Save the page so that nobody mess with you
3) Check for spelling
4) Check it is readable and understandable
5) Check the content that it is nobb proof.
6) Correct what needs to be corrected.
7) Remove the first commnet
8) Post in this thread that it has been done (so that I know about it)
------------------ 2 ---------------------
On the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_BLackstone_Flash2
I need sombody to extract that shp.exe and follow the outline that I have placed.
Look at how I formated the first page when it came to the files.
I will pick it up some other time.
I also am lost for words on the HSPL issue, need sobody toexplain it.
------------------ 3 ------------------------
We need to update the roms as people will want them
here is what I wrote on that subject
http://forum.xda-developers.com/showpost.php?p=3037840&postcount=4
the WIKI page that needs updating is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Also one needs to check the forum for theads as a few other roms have poped up.
--------
So guys, help us to help you and let some of us with day jobs go to bed.
Thanks
Click to expand...
Click to collapse
sure thing, I have a little spare time right now so I will contribute with you guys, just step one so far.....

I think I did step one, please feel free to correct or improve anything, glad to be of any help, cheers.

the-equinoxe said:
[size=+2]MOD BREAK
[/size]
As you all may have noticed the thread has been cleaned up.
From now on: keep it clean, stop begging, no whining.
Yes the HSPL will be released, yes it will be free.
[size=+2]Warning: those who leak the testversion will be banned, no exeptions![/size]
Click to expand...
Click to collapse
I am sorry, but I still have to say I have got the so called HSPL in some forums. I downloaded it and have it tested. It worked. Someone said it is SSPL made by Cmonex not the HSPL.
I am not sure if it was the leaked test version. If you need it let me know.
Guys, Great Job. Thanks a lot.

skywalkeret said:
I am sorry, but I still have to say I have got the so called HSPL in some forums. I downloaded it and have it tested. It worked. Someone said it is SSPL made by Cmonex not the HSPL.
I am not sure if it was the leaked test version. If you need it let me know.
Guys, Great Job. Thanks a lot.
Click to expand...
Click to collapse
Skywalkeret, what u have is leakage of Cmonex's testversion and so-called HSPL by someone, which makes you several steps to the success. what i know from Cmonex SSPL is not secure at this stage. And he/she does HOPE everyone can pay patience for the final HSPL release. THE PRE-LEAKAGE of SSPL WOULD MAKE HTC to improve their future "firewall" against HSPL, and I don't believe that EVERY EACH HTC OWNER or FANS would like to hear this sort of stuff?!
It is A REAL SHAME for those guys lost their promise to Cmonex and just make their own threads HOT, even DO NOT MENTION A WORD ABOUT THE GENERATOR OF THIS SSPL.

raphael_ding said:
Skywalkeret, what u have is leakage of Cmonex's testversion and so-called HSPL by someone, which makes you several steps to the success. what i know from Cmonex SSPL is not secure at this stage. And he/she does HOPE everyone can pay patience for the final HSPL release. THE PRE-LEAKAGE of SSPL WOULD MAKE HTC to improve their future "firewall" against HSPL. It is A REAL SHAME for those guys lost their promise to Cmonex and just make their own threads HOT, even DO NOT MENTION A WORD ABOUT THE GENERATOR OF THIS SSPL.
Click to expand...
Click to collapse
Seems you are the right one i have talked to in some other forums. I sugguest we may do something to wake those guys up and warning them.
If there is anything I can help, please let me know.

Re: Raphael_ding
hey, ding. i got you. I must say, world is just like a box of chocolate. you dont know what you gona get lol. they just did it.
me? yes, im just waiting for the original olinex's NON-BETA version lol
again. thanks olinex's hard work. you let me flash a lot of ROM on my S1, TOUCH PRO, ....and my future HD.

skywalkeret said:
Seems you are the right one i have talked to in some other forums. I sugguest we may do something to wake those guys up and warning them.
If there is anything I can help, please let me know.
Click to expand...
Click to collapse
THX, Skywalkeret, what we can do is to post sth. and let those guys know about what they are doing. And better ask forum moderators to eliminate those leakege threads ASAP.
Cheers

Hard-SPL Unlocker for Xperia X1 - Released!

yes, the xperia seems to have a normal HTC SPL... so it will probably need a hardspl. =)
[size=+2]UPDATE: RELEASE TIME[/size]
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
UPDATE - NEW: 0.78.OliNex Hard-SPL, I was asked to help with this as 0.78 seems to work better for some newer devices. it's the attachment xperia078_2.zip - to flash this over your existing Hard-SPL, you can just use customruu or SD flash. you can also flash it via SSPL (such as Xperia-SSPL-Manual EXE) or if you overwrite NBH file in X1_HardSPL_v1 after running the exe.
thanks for any donations, you can see the donation link in our signature - the big link saying "elite project".
Instructions to flash Hard-SPL:
it's recommended you run the basic package, and don't flash the other attachment (MFG SPL - it is only for hackers).
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment).
3) you must Have Phone Synced with PC in Windows Mobile!
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh)
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
7) Hard-SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.72.OliNex (or 0.52.OliNex MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned OFF, press and hold the volume down button along with the power button, then release the power button, and finally release volume down button when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically(your device doesn't go to tricolour screen), please copy Xperia-SSPL-Manual.exe from the Xperia-SSPL-Manual.zip attachment to the device and run it. then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
NOTE 3: this is unsigned Hard-SPL. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here - scroll down!
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
***
IMPORTANT: extra Xperia-specific notes: the prerelease roms out there in the X1 ROMs thread are not going to flash on retail devices because the radios they include are only flashable on prerelease devices ("Security unlocked" message in SPL can be seen on these). so what you need to do is repack the NBH without the radio - this will only work with Hard-SPL though, as repacking breaks the HTC sign on the NBH file.
I had a tester upload a repackaged UK image, which will flash fine. you can find it in the x1 roms thread. =)
***
TROUBLESHOOTING TIPS:
- read the instructions.
- read the instructions.
- read the instructions.
- if you get connection error in RUU after the device goes to tricolour screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. read the thread for even more tips that I don't remember now. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- if hardspl EXE won't run, and you are on vista, try to right click it and use "run as Administrator" option
- if SSPL-Manual.exe or enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
***
extra how to: how to restore Stock SPL for warranty reasons.
step by step:
- this is ONLY for warranty reasons. i.e. the device needs repair and you have to send it to htc to get it serviced. if you plan to restore hardspl then don't even bother flashing this stock package, unless you are some kind of hacker/dev
- IMPORTANT: be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
- now the steps
1. download the stock spl package from this post.
2. download X1_HardSPL_v1 too, from this post.
3. run the hardspl package, but do not press Next button i.e do not go ahead with flash yet.
4. at this point, take the extracted stock SPL, a RUU_Signed.NBH file, and overwrite the other RUU_Signed.NBH in hardspl package.
5. go on with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour screen with 0.52.OliNex version), it goes to 100%, reboots, done.
+1. to verify, enter bootloader (see description above in this post), and check version number on tricolour screen. it should say 0.72.0000.

OliNex said:
yes, the xperia seems to have a normal HTC SPL... so it will probably need a hardspl.
so, let us know if you have a prerelease device to test on... we looked in this forum and saw several people who have one. thanks.
Click to expand...
Click to collapse
I just got my xperia and i'll be willing to use my x1 to test hardspl. Its a retail version and not a prerelease x1 if thats any help.

I have, and have already dumped all rom to raw. You can pm me what you need or catch me on msn.

I can do my best to help.

What is a SPL ?

Does anyone have a working version of the hardspl for the X1 so we can try it? Thanks

Yeah we need SPL big time, any genius working on it?

I said that Olipro and cmonex will make Xperia Hard-SPL. So people, it's time for test :d
And the most important don't forget to say "thanks" and click on donate link

borce_razor said:
I said that Olipro and cmonex will make Xperia Hard-SPL. So people, it's time for test :d
And the most important don't forget to say "thanks" and click on donate link
Click to expand...
Click to collapse
THANX
but I dont see the test download

I sent them a msg a while back (weeks maybe) saying i had a proto x1 and was willing to sacrifice it for the cause. Still am - Nothing back though.

I for one will donate for the cause need a generic uk rom without the crap bluetooth problem

the_flyer said:
I for one will donate for the cause need a generic uk rom without the crap bluetooth problem
Click to expand...
Click to collapse
i've got a generic uk xperia but still have the dreaded bluetooth problem

damn. I have had more luck today with the bluetooth and touch wood havent had any problems since the wifi was switched off...

Have you tryed switching off standby mode? It sorted the bluetooth prob out for me, untill i installed afew new apps. Problem back again

[size=+2]UPDATE[/size]
we will start work today (we = OliNex = Olipro & cmonex)
I'll check the PM's soon, as we need testers.
as for donations: yes we would appreciate them much, would help a lot (the big link in first post, don't worry about it saying diamond/raphael)
P.S.: bluetooth etc offtopic problems should be posted elsewhere, please. thanks

Xleecher said:
I just got my xperia and i'll be willing to use my x1 to test hardspl. Its a retail version and not a prerelease x1 if thats any help.
Click to expand...
Click to collapse
retail version is better! PM me with your MSN contact address

@ Cmonex
I've got X1i (vodafone) retail as well and willing to help in beta testing too.
Also donated £10.00

hassan said:
@ Cmonex
I've got X1i (vodafone) retail as well and willing to help in beta testing too.
Also donated £10.00
Click to expand...
Click to collapse
thanks have you got MSN ?

cmonex said:
thanks have you got MSN ?
Click to expand...
Click to collapse
Yes just click that small icon under uk flag in the right corner.

Donated £10. Thanks for your help with the hardspl guys.

Unbranding HD Mini to latest HTC ROM

Please not that this is my first guide on here and I'll make it as easy to understand as much as possible.
This has been tested on a Vodaphone branded HD Mini. Please reply to this post if this has worked on a different branded phone.
This is to help people to Unbrand their HD Mini's.
Have you managed to flash it to the latest ROM? If not you need to do the following:
•Download the SSPL_RUU.exe and put it into an empty folder (http://forum.xda-developers.com/showthread.php?t=694409)
•Add the RUU_signed.nbh that you want to flash to your device into the same folder (http://shipped-roms.com/shipped/Pho...adio_Signed_32.2803.05.06_0.63.05.36_Ship.exe) Assuming you want Western Europe ROM. You can use a different ROM if you want
•Connect your HD Mini to your PC. Making sure you use ActiveSync
•Run SSPL_RUU.exe and following the onscreen propmts.
Once done your phone will reboot. Next is to flash a Radio ROM.
•Move your ROM from the folder which contains the SSPL_RUU.exe
•Using the ROM that you just used Extract it to a location of your choice by using winRAR. Look for
Radio_32.2806.05.06_0.63.05.40 and rename it to PHOTIMG.nbh
•Place PHOTIMG.nbh into the same folder as SSPL_RUU.exe and flash once again
•Once done you will have a unbranded HD Mini as if you bought it like that. This worked on my Vodaphone
branded HD Mini and worked a charm.
I'd like to thank DarkForcesTeam for the SSPL_RUU.exe and the rest of the developers that have made
this possible. Without them we would be stuck with these branded phones.

Could the Admins place this as a sticky please. Many Thanks

The phone hard-resets after radio flash ? I want to flash only the radio.

Thanks for your guide, wardy. Great explanation.
But it doesn't work with my HD mini.
It stays at 0% for quite a long time. Afterwards, there's an error saying something about a wrong ID.
I'm afraid I'll have to wait for a HD mini hardspl

ci6i said:
The phone hard-resets after radio flash ? I want to flash only the radio.
Click to expand...
Click to collapse
As long as you are using the SSPL_RUU.exe to flash only the radio & renaming then you can flash it. Yes after the flash the phone does hard-reset.

Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.

wardy_uk1 said:
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
Click to expand...
Click to collapse
Thanks, I installed PHO03693.exe now. What happened afterwards:
-The error I get when I try to install any ROM via “DFT_SSPL_MINI” is “[202] Connection error”.
-If I enter boot mode via my endkey app and install via “DFT_SSPL_MINI” after that, it ends with “Error [262]: Update error”. When I click “view document”, it says: “dummy file”.
-If I try to install official HTC ROM “RUU_Photon_HTC_Europe_1.36.401.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship”, I get “Error [294] invalid vender ID”

Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps

wardy_uk1 said:
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
Click to expand...
Click to collapse
I tried both Windows 7 and XP as administrator.
When I'm doing hard-reset, I have to install PHO03693.exe afterwards again. So I did.

It has confused me now mate :$ You'll be better waiting for the HSPL instead. Hopefully it won't be too long now for it.

I have a cracked hd mini with vodafone branding..........i wanted to install the latest official rom......but i'm unable to do so........also i'm new to all this stuff can anybody please help me with this.........thanks

Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks

rfung said:
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
Click to expand...
Click to collapse
Likewise I see no Radio file....
[edit]
Found the file now, download the latest HTC update http://www.htc.com/uk/SupportDownload.aspx?p_id=314&cat=0&dl_id=1024 & you can extract the file from there.
Can anyone confirm if flashing the Radio rom is safe? - the DarkForcesTeam original link warns against it! > http://forum.xda-developers.com/showthread.php?t=694409
Im using an O2 UK HD MINI but have upgraded the ROM to the latest just the radio has remained at 0.63.05.18

I flashed with east europen ROM and now (and before flashing) I don't have GSM signal on phone, strange is that signal show up sometimes 1/5 and disapear again after few seconds but nothing else.
I have one phone with original Spanish language and have same problem with signal. dunno why that happen.

can anyone send me the steps in german? i dont really understand it xD
sorry but my english ist not perfect

Managed to carry out the Radio ROM update with an O2 branded phone.
However the Radio rom listed is still the old one (0.63.05.18)
The update process appeared to take but the radio ROM has remained the same. So take from that what you will?!

help
Please help me guys! I think i've done exactly like u said but when i want to flash the RADIO (PHOTIMG.nbh) after i've flashed the RUU i get this message: the update utility cannot be used for your PDA Phone. Please get newer Update Utility
I downloaded the Radio from HTC site, it was 2 files dont know why? 1 small for like 700kb and the other 12mb....