Database Develop

Xposed active Modules not working

I'm on Oneplus 7T Tmobile HD1907. My phone was recently upgraded to Android 11. Magisk 22.1 installed and Riru v25.
I tried both Lsposed and Edxposed and it shows active, but the modules aren't actually doing anything. It worked perfectly fine on Android 10.
Riru App shows everything is fine:
"SELinux is enforcing and there are no incorrect rules related to Riru.
Riru v25.4.2 (415, API v25) is in use.
Loaded modules:
8d0b: "v0.5.2.2_4683-master" (4683), api v10, support hide"
Click to expand...
Click to collapse
I have the following modules enabled.
io.shortway.appcontext
com.intangibleobject.securesettings.plugin
tw.fatminmin.xposed.minminguard
com.retrox.aodmod
dev.ukanth.ufirewall.donate
com.chaimchaikin.textinject
Attached are Edxposed Logs.
Can someone help me figure out what is wrong?
Thanks

Hey, since Riru v22 an important thing was changed and modules must be updated with changes to work again so try to downgrade to a riru version before v22 and see (Check if this is compatible with Android 11...)
I hope I help you

Xprivacy lua on Android 11

Xprivacy Lua doesn't seem to be working on Android 11 AOSP based custom ROM.
Installed using LSposed.
App ops also doesn't seem to be working.
Any workaround?

Sjain11 said:
Xprivacy Lua doesn't seem to be working on Android 11 AOSP based custom ROM.
Installed using LSposed.
App ops also doesn't seem to be working.
Any workaround?
Click to expand...
Click to collapse
Can you explain more as to what is not working.
Device and what rom your using may help.
How have you setup lsposed. If you are going to set restriction in xpl for all apps have you selected all apps in lsposed.
What app ops are you using as wasn't aware it an exposed module.

spawnlives said:
Can you explain more as to what is not working.
Device and what rom your using may help.
How have you setup lsposed. If ypu are going to set restriction in xpl for all apps have you selected all apps in lsposed.
What app ops are you using as wasn't aware it an exposed module.
Click to expand...
Click to collapse
Wow thanks. Selecting all apps in LSposed worked.

Hi, I just had the same problem and found this thread and resolved the issue, thanks!
Question: Is there a way to default so that new apps are automatically selected when installed?

markd89 said:
Hi, I just had the same problem and found this thread and resolved the issue, thanks!
Question: Is there a way to default so that new apps are automatically selected when installed?
Click to expand...
Click to collapse
On LSposed no.
Any new app will have to be enabled in LSposed for xprivacylua to work.
I don't think that option will be included any time soon, if at all.

spawnlives said:
On LSposed no.
Any new app will have to be enabled in LSposed for xprivacylua to work.
I don't think that option will be included any time soon, if at all.
Click to expand...
Click to collapse
I think that's an important capablilty, otherwise things will leak on first run.
I tried installed Edxposed but get this issue please install riru from magisk manager
The comments on that issue say Edxposed is not longer supported ant to use LSPosed, Taichi or Dreamland instead. Does Taichi or Dreamland allow for new apps to default to be restricted?
Thanks again!

markd89 said:
I think that's an important capablilty, otherwise things will leak on first run.
I tried installed Edxposed but get this issue please install riru from magisk manager
The comments on that issue say Edxposed is not longer supported ant to use LSPosed, Taichi or Dreamland instead. Does Taichi or Dreamland allow for new apps to default to be restricted?
Thanks again!
Click to expand...
Click to collapse
If you want to use Edxposed you will have to downgrade Rui core module ( in magisk ) to version under 25. I think the latest working version was 25.5.5 ( from memory ).
As for Taichi, Dreamland and other Xposed like frameworks i don't know never used them.
I have be using Xposed since the Jellybean ( android 4 ) and have only install rovo's version ( up to android 8 ), then started using Edxposed ( currently on now ). The only reason i'm not using Lsposed at the moment is laziness on my part because of the extra steps involved.
Note: not all modules will require every app in Lsposed to be activated it will depend on what the module does.

@spawnlives thank you!
I got Edxposed working with Riru 25.4.4 https://github.com/RikkaApps/Riru/releases/tag/v25.4.4

To use XprivacyLua on Android 11 - Which one should I get ?
Edxposed or Lsposed ?

JazonX said:
To use XprivacyLua on Android 11 - Which one should I get ?
Edxposed or Lsposed ?
Click to expand...
Click to collapse
Depends on magisk version
I am using stable magisk with latest versions of riu and lsposed.
Lsposed with modules you have to select what apps to restrict.
Big thanks to @Fif_ for automatic selecting modules.
Edxpoesd has two modes but you have to downgrade riu module for it it work.
With regards to expricavylua working fine on stable magisk /latest versions of riu/lsposed on S9 running lineage 18.1 (A11).

spawnlives said:
Depends on magisk version
I am using stable magisk with latest versions of riu and lsposed.
Lsposed with modules you have to select what apps to restrict.
Big thanks to @Fif_ for automatic selecting modules.
Edxpoesd has two modes but you have to downgrade riu module for it it work.
With regards to expricavylua working fine on stable magisk /latest versions of riu/lsposed on S9 running lineage 18.1 (A11).
Click to expand...
Click to collapse
For reference the post about automatically adding newly installed apps to LSPosed scopes is here:
LSPosed Xposed Framework [8.1-13.0]. Simple Magisk Module
Developers: LSPosed Developers Homepage: GitHub ✱ Requirements: • Magisk 21+ • Android 8.1-13 • Riru(NOT NEEDED) USE ZYGISK Description: Riru module providing ART interception framework (natively for Android Pie) that provides consistent API...
forum.xda-developers.com

markd89 said:
@spawnlives thank you!
I got Edxposed working with Riru 25.4.4 https://github.com/RikkaApps/Riru/releases/tag/v25.4.4
Click to expand...
Click to collapse
JazonX said:
To use XprivacyLua on Android 11 - Which one should I get ?
Edxposed or Lsposed ?
Click to expand...
Click to collapse
spawnlives said:
Depends on magisk version
I am using stable magisk with latest versions of riu and lsposed.
Lsposed with modules you have to select what apps to restrict.
Big thanks to @Fif_ for automatic selecting modules.
Edxpoesd has two modes but you have to downgrade riu module for it it work.
With regards to expricavylua working fine on stable magisk /latest versions of riu/lsposed on S9 running lineage 18.1 (A11).
Click to expand...
Click to collapse
As stated in post #8 EdXposed is also working with stable Magisk v23.0, but only using Riru 25.4.4 and lower. Advantage for me is that I don't have to add new apps to the scope like in Lsposed. Even with Fif's Automate flow, I would forget to reboot

Smali patcher alternative A12 support

An alternative way for Android 10 (Tested), Android 11 (Tested) & probs recently launched Android 12 (Not tested) If someone is using A12. Please do check. It should work.
1- Download & Install Riru from Magisk repository (Reboot)
2- Download & Install Riru - LSposed from Magisk repository (Reboot)
3- Download & install mockmocklocation app from xposed repos.
4- Switch on the mockmocklocation module inside LSposed app.
5- Switch on the module inside the LSposed app (Tick mark) for the app you want to spoof. For e.g Pokemon go or any app which you want to spoof.
6- Reboot.
This alternative way is basically for A12 however it's not tested but it should work. Try!
It's simple & easy. Until @fOmey doesn't update the patch for A12

Ok this works....just missing the steps to install magisk..make it pass safetynet..if anyone needs help message me

I can only get magisk canary working on android 12 on my device... Can i install modules, if so were can i get them? Thank you!
EDIT: Already responding to myself, to people asking, just search for Foxmmm on github.

noobSU said:
An alternative way for Android 10 (Tested), Android 11 (Tested) & probs recently launched Android 12 (Not tested) If someone is using A12. Please do check. It should work.
1- Download & Install Riru from Magisk repository (Reboot)
2- Download & Install Riru - LSposed from Magisk repository (Reboot)
3- Download & install mockmocklocation app from xposed repos.
4- Switch on the mockmocklocation module inside LSposed app.
5- Switch on the module inside the LSposed app (Tick mark) for the app you want to spoof. For e.g Pokemon go or any app which you want to spoof.
6- Reboot.
This alternative way is basically for A12 however it's not tested but it should work. Try!
It's simple & easy. Until @fOmey doesn't update the patch for A12
Click to expand...
Click to collapse
hello how to hide root from apps if zygisk denylist is off? because if i turn on denylist mock.mock location will not work

hasbulah said:
hello how to hide root from apps if zygisk denylist is off? because if i turn on denylist mock.mock location will not work
Click to expand...
Click to collapse
Use magisk alpha with magisk hide support. & Add only google play service to get safetynet pass.

noobSU said:
Use magisk alpha with magisk hide support. & Add only google play service to get safetynet pass.
Click to expand...
Click to collapse
thank you very much, u save me from downgared my device running miui 13

noobSU said:
Use magisk alpha with magisk hide support. & Add only google play service to get safetynet pass.
Click to expand...
Click to collapse
oh wow is there Magisk Alpha that still supports magisk hide in for android 12? please kindly help with it.

Riru does not work with Zygisk. HELP! I Need advice.

I have a magisk v24.3. I need a list of programs from Edexposed. To pass the Safetynet check, I enable the zygisk function, but when I enable this function, the Riru module immediately stops working.
So, if I use edexposed, I cannot pass Safetynet check (because zygisk is disabled), but if I pass Safetynet check, I cannot use Edexposed. What if I have to change the version of Magisk to solve this problem? If this is the only solution to this problem, what version of Magisk do you recommend?
p.s Again, my main concern is that Edexposed can work and I can pass the Safetynet check.
________________________
I use the phone model Xiaomi redmi note 7 (MIUI Global 11)
Android version : 9

twrpdnyskqw said:
I have a magisk v24.3. I need a list of programs from Edexposed. To pass the Safetynet check, I enable the zygisk function, but when I enable this function, the Riru module immediately stops working.
So, if I use edexposed, I cannot pass Safetynet check (because zygisk is disabled), but if I pass Safetynet check, I cannot use Edexposed. What if I have to change the version of Magisk to solve this problem? If this is the only solution to this problem, what version of Magisk do you recommend?
p.s Again, my main concern is that Edexposed can work and I can pass the Safetynet check.
________________________
I use the phone model Xiaomi redmi note 7 (MIUI Global 11)
Android version : 9
Click to expand...
Click to collapse
Why dont you use LSPosed instead? EdXposed is probably disontinued (although not announced officially, its practically dead), LSPosed is much more up-to-date and you can easily pass SafetyNet with it. It works bit differently than EdXposed, so you'd have to read wiki.
By the way, Zygisk isn't compatible with Riru because they work in a similar manner. Riru is deprecated, use Zygisk version of modules

Lord Sithek said:
Why dont you use LSPosed instead? EdXposed is probably disontinued (although not announced officially, its practically dead), LSPosed is much more up-to-date and you can easily pass SafetyNet with it. It works bit differently than EdXposed, so you'd have to read wiki.
By the way, Zygisk isn't compatible with Riru because they work in a similar manner. Riru is deprecated, use Zygisk version of modules
Click to expand...
Click to collapse
Thanks for the feedback bro. I already tried LSposed but LSposed doesn't have the apps I need, for example I need Device ID Masker - it does the swapping of the device hardware (imei) and other parameters and it's a paid app. I also need RootCloak - it hides the root.
Do you think there is a good analogue for LSposed?

twrpdnyskqw said:
Thanks for the feedback bro. I already tried LSposed but LSposed doesn't have the apps I need, for example I need Device ID Masker - it does the swapping of the device hardware (imei) and other parameters and it's a paid app. I also need RootCloak - it hides the root.
Do you think there is a good analogue for LSposed?
Click to expand...
Click to collapse
All modules that works on EdXposed will work on LSPosed too (or almost all) since its the same Xposed Framework, just implemented differently. And Xposed modules aren't limited by those present in the repository. You can download them from another source and install, then enable in the manager and use.
For example, you can download both of your modules from this sources:
Device ID Masker Lite | Xposed Module Repository
repo.xposed.info
RootCloak (with 5.x and 6.x support) | Xposed Module Repository
repo.xposed.info
And by the way - both of these modules seems to be outdated (especially RootCloack). As a replacement for the first one, you can use Android Faker (https://repo.xposed.info/module/com.android1500.androidfaker) - updated regularly. As for hiding root, right now there are much more reliable solutions than Xposed modules. But what you need, depends on what apps/tools you need to hide root from. You should take a look on this thread: https://forum.xda-developers.com/t/discussion-magisk-the-age-of-zygisk.4393877/
Depending on your usage, you may need Universal SafetyNet Fix module, Shamiko or just to use Enforce DenyList in Magisk settings. In rare situations, there is a need to hide apps with root access from other apps (like bank apps), and HideMyApplist Xposed module helps in that cases

Lord Sithek said:
All modules that works on EdXposed will work on LSPosed too (or almost all) since its the same Xposed Framework, just implemented differently. And Xposed modules aren't limited by those present in the repository. You can download them from another source and install, then enable in the manager and use.
For example, you can download both of your modules from this sources:
Device ID Masker Lite | Xposed Module Repository
repo.xposed.info
RootCloak (with 5.x and 6.x support) | Xposed Module Repository
repo.xposed.info
And by the way - both of these modules seems to be outdated (especially RootCloack). As a replacement for the first one, you can use Android Faker (https://repo.xposed.info/module/com.android1500.androidfaker) - updated regularly. As for hiding root, right now there are much more reliable solutions than Xposed modules. But what you need, depends on what apps/tools you need to hide root from. You should take a look on this thread: https://forum.xda-developers.com/t/discussion-magisk-the-age-of-zygisk.4393877/
Depending on your usage, you may need Universal SafetyNet Fix module, Shamiko or just to use Enforce DenyList in Magisk settings. In rare situations, there is a need to hide apps with root access from other apps (like bank apps), and HideMyApplist Xposed module helps in that cases
Click to expand...
Click to collapse
Thanks bro, you're the best!

twrpdnyskqw said:
Thanks bro, you're the best!
Click to expand...
Click to collapse
You're welcome If you will need any help, let me know. I'm not an expert, but I can try to help. Good luck

Lord Sithek said:
All modules that works on EdXposed will work on LSPosed too (or almost all) since its the same Xposed Framework, just implemented differently. And Xposed modules aren't limited by those present in the repository. You can download them from another source and install, then enable in the manager and use.
For example, you can download both of your modules from this sources:
Device ID Masker Lite | Xposed Module Repository
repo.xposed.info
RootCloak (with 5.x and 6.x support) | Xposed Module Repository
repo.xposed.info
And by the way - both of these modules seems to be outdated (especially RootCloack). As a replacement for the first one, you can use Android Faker (https://repo.xposed.info/module/com.android1500.androidfaker) - updated regularly. As for hiding root, right now there are much more reliable solutions than Xposed modules. But what you need, depends on what apps/tools you need to hide root from. You should take a look on this thread: https://forum.xda-developers.com/t/discussion-magisk-the-age-of-zygisk.4393877/
Depending on your usage, you may need Universal SafetyNet Fix module, Shamiko or just to use Enforce DenyList in Magisk settings. In rare situations, there is a need to hide apps with root access from other apps (like bank apps), and HideMyApplist Xposed module helps in that cases
Click to expand...
Click to collapse
thank you so much it helped me too.

Question Anyone pass cts and gpay woring with OxygenOS 12.1 A.15 rooted?

Hi
I am rooting my oneplus 10 pro and success
but try everything include safetynet-fix-integrity,Shamiko,MagiskHidePropsConf-master
still can't pass cts and google pay always warning
Is there anyone pass cts and google pay working after rooted?
thanks for reading!

qky said:
Hi
I am rooting my oneplus 10 pro and success
but try everything include safetynet-fix-integrity,Shamiko,MagiskHidePropsConf-master
still can't pass cts and google pay always warning
Is there anyone pass cts and google pay working after rooted?
thanks for reading!
Click to expand...
Click to collapse
Yes , remove magiskhideprops , make sure you installed magisk beta, shamiko latest 0.5.2, universal safetynet latest fix 2.3.1
And zygisk is enabled.

qky said:
Hi
I am rooting my oneplus 10 pro and success
but try everything include safetynet-fix-integrity,Shamiko,MagiskHidePropsConf-master
still can't pass cts and google pay always warning
Is there anyone pass cts and google pay working after rooted?
thanks for reading!
Click to expand...
Click to collapse
Have you enabled denylist and ticked Play services from system apps?
Check gms and gms.unstable in it and reboot.
Enforce denylist off

Hi
thanks for replying
How about your google pay working?

Aarif goku said:
Have you enabled denylist and ticked Play services from system apps?
Check gms and gms.unstable in it and reboot.
Enforce denylist off
Click to expand...
Click to collapse
restore the system
root
install magisk 25.2
zygisk enable
Enforce denylist off
ticket all google app include system app
module :
shamiko v0.5.2
universal SafetyNET Fix v2.3.1
only pass Basic

qky said:
Hi
thanks for replying
How about your google pay working?
Click to expand...
Click to collapse
Yes

qky said:
restore the system
root
install magisk 25.2
zygisk enable
Enforce denylist off
ticket all google app include system app
module :
shamiko v0.5.2
universal SafetyNET Fix v2.3.1
only pass Basic integrity
cts still fail
any suggestion?
many thanks
View attachment 5682971View attachment 5682977View attachment 5682979View attachment 5682981View attachment 5682975
Click to expand...
Click to collapse
No need to put all Google apps ,
And hide magisk manager from settings, it should reinstall itself with a different package name.

Aarif goku said:
No need to put all Google apps ,
And hide magisk manager from settings, it should reinstall itself with a different package name.
Click to expand...
Click to collapse
sort
flash A11 version
patch everything
finally work
appreciate

qky said:
sort
flash A11 version
patch everything
finally work
appreciate
Click to expand...
Click to collapse
Android 11 or OxygenOS A.11 ?

Aarif goku said:
Android 11 or OxygenOS A.11 ?
Click to expand...
Click to collapse
OxygenOS A.11

I'm on A.15 and use gpay all the time.
Latest Magisk stable
Enabled zygote
Enabled enforce list (don't configure it)
Install the module "Universal Safety net Fix"
You wont pass a root checker as this only blocks google services from detecting root.