Database Develop

[SOLVED]TWRP stuck at splash screen

Hi guys!
Just installed Android P (MIUI 10 9.1.24) on my phone. I used MiFlash method, so the previous twrp got replaced with stock recovery. So I downloaded the latest twrp for mi 8 se, version TWRP-3.2.3-1227. Now whenever I try to boot into this, TWRP gets stuck at the splash screen & nothing else happens. Am I doing something wrong? Any help?

Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262

evanB70 said:
Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262
Click to expand...
Click to collapse
Hello there... I am having the same issue... can you explain a little bit more, how do i know the boot image i need to flash.
regards.

j0an said:
Hello there... I am having the same issue... can you explain a little bit more, how do i know the boot image i need to flash.
regards.
Click to expand...
Click to collapse
I flashed may be 5 times ( for different tests) 9.2.15 dev version from here and TWRP 1227 was working and sticking at every trial without need to deencrypt.
https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-mi-8-se/
In my view this issue is more related to the rom version 9.1.24 I didn't tested.
Anyway thanks OP for reporting.

evanB70 said:
Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262
Click to expand...
Click to collapse
I would like to apologize for statement given in my last post.
I want to make things corrected and thank you for the light you gave me.
Sure it is related to bad deencryption because with 9.2.15 official rom was possible to install TWRP but we were several unable to boot any other rom after installation. We were rejected to fastboot screen at every trials. We found solution by flashing older official rom version.

Good night friend
I have Mi 8 SE that has been installed TWRP LR. TEAM 3.3.0 and runs well, in normal use suddenly stuck, and I immediately restarted my Mi 8 SE, and only entered fastboot and stuck mode, I tried to enter TWRP mode and even then just stuck on the TWRP logo, and when I flash again the method cannot because my Mi 8 SE has no USB Debuging, and only the CMD notification appears "FAILED (remote: Check device console.)",
help me to be able to fix my Mi 8 SE ,,
Thank you so much for your help

reky2426 said:
Good night friend
I have Mi 8 SE that has been installed TWRP LR. TEAM 3.3.0 and runs well, in normal use suddenly stuck, and I immediately restarted my Mi 8 SE, and only entered fastboot and stuck mode, I tried to enter TWRP mode and even then just stuck on the TWRP logo, and when I flash again the method cannot because my Mi 8 SE has no USB Debuging, and only the CMD notification appears "FAILED (remote: Check device console.)",
help me to be able to fix my Mi 8 SE ,,
Thank you so much for your help
Click to expand...
Click to collapse
Not clear enough your explanation!
"flash again" What is it?
Do you access fastboot and access on your computer?
if yes, you must flash a fastboot rom via miflash in order to reset the phone.

Mi 9 hard bricked?

I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?

I suggest using a edl cable first if that fails I would probably go fro a refund claim if its totally unresponsive...

Knubz1337 said:
I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?
Click to expand...
Click to collapse
Someone else had the same problem as you on here.
Edit
Here is the link
https://forum.xda-developers.com/Mi-9/help/brick-help-t3930230/page2

Knubz1337 said:
I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?
Click to expand...
Click to collapse
Miuiflashpro maybe? I managed to find an Italain version. Good luck mate?

What did you do? How can you "fail" to flash it?

SmallTarzan said:
What did you do? How can you "fail" to flash it?
Click to expand...
Click to collapse
Error too many links

Thargorsson said:
I suggest using a edl cable first if that fails I would probably go fro a refund claim if its totally unresponsive...
Click to expand...
Click to collapse
i ordered a xiaomi edl deep flash cable. I will try it tomorrow

Did you fix it? If so, how?

Knubz1337 said:
i ordered a xiaomi edl deep flash cable. I will try it tomorrow
Click to expand...
Click to collapse
edl without authorized account won't work....

Addymore said:
edl without authorized account won't work....
Click to expand...
Click to collapse
I couldn't enter edl Mode with the cable.
I think I will send It back

Same issue here.
I did the same thing. And it hard bricked my phone. I send it back, and they change the motherboard for me.

I have the same issue. Mine is mi9se. Managed to solve?

hi, I unlocked the bootloader, did the twrp, did the root and, when installing the pixel rom, it crashed on FASTBOOT and didn't come out anymore, help me

sd brasil said:
hi, I unlocked the bootloader, did the twrp, did the root and, when installing the pixel rom, it crashed on FASTBOOT and didn't come out anymore, help me
Click to expand...
Click to collapse
You didn't flash the last firmware.zip before flashing pixel, or a full miui rom?
On pc, no sign of life in fastboot?

Oel said:
You didn't flash the last firmware.zip before flashing pixel, or a full miui rom?
On pc, no sign of life in fastboot?
Click to expand...
Click to collapse
Sim fiz tudo... Mesmo assim entrou em unbrick...
Consegui com o miflash PRO voltar a rom original

Mi 9 stuck on mi logo but there's more than that...

Hi!
Suddenly my phone is stuck on mi logo with the android logo on bottom for 2 days now.
I downloaded a frimeware for mi 9 and trying to flash it with mi flash software but its never completed the flashing.. it keeps counting the seconds for 3h and nothing happend.
(I added a screenshot above)
I tried to flash a new rom but its says the bootloader is locked.
Im afraid that development mode is not turned on so i can even unlock it and the phone is not booting up for it.
There is something eals to do or use it for door holder ? ?
Thanks.

very sad
I have an experience like that,
step1: but first try to flash the exact ROM was before this happened. it must be fastboot one. if no success try the next step
step2: if you are lucky and have been Bound mi account in the developer menu you can unlock the bootloader and flash any ROM for your device. if no success try step 3
step3: unfortunately maybe you need to flash ROM via EDL and authorized account.

thanks you.. the first step worked! buy via recovery mode
cheers!

Bootloop Redmi 9 (lancelot)

Hello i have flash TWRP on my Redmi 9
and on my computer i have typed this command
"fastboot reboot fastboot"
for acces to the fastbootd mode
and now i have
REDMI
Powered By Android
black screen
and
Redmi
Powered By Android
and this loop
my english is very bad
bye

I have this problem too!!! could you fix it? it happened to me when I did this too

try to hard reset

I had the same problem after trying to flash the TWRP custom recovery on my Redmi 9 (lancelot).
In case that someone still needs to know, following was my solution:
I needed to flash back the stock firmware on my device with SP Flashtool. For that you of course need to download the firmware and take the scatter file of it. Then grab a custom Download Agent File and an authentication file from the web.
Also you need the MTK_bypass utility with the right payloads from the github website (Redmi 9 is MT6768, just take the master collection payload, it worked for me). You need that tool to disable the DAA und SLA protection on your Redmi 9. (Except you have access to an authorized Mi account of course, then you can just flash it with Mi Flash tool, but usually, one doesn't have that.) Follow the instruction on the web, there are detailed ways how to install the right drivers and run the bypass utility correctly.
In my case I had to format my device with the automatic flashing in SP Flashtool before the flashing worked, but that was it - my Redmi 9 is working fine again.

thank you for the input as it really cleared my head after i took a break at trying to get this thing out of a bootloop.
this does work, using sp flash tool but the device will auto detect through usb and you've gotta have the scatter file and firmware for the device. after using the brom utility don't restart the phone, you will reverse the process.

iReebu said:
I had the same problem after trying to flash the TWRP custom recovery on my Redmi 9 (lancelot).
In case that someone still needs to know, following was my solution:
I needed to flash back the stock firmware on my device with SP Flashtool. For that you of course need to download the firmware and take the scatter file of it. Then grab a custom Download Agent File and an authentication file from the web.
Also you need the MTK_bypass utility with the right payloads from the github website (Redmi 9 is MT6768, just take the master collection payload, it worked for me). You need that tool to disable the DAA und SLA protection on your Redmi 9. (Except you have access to an authorized Mi account of course, then you can just flash it with Mi Flash tool, but usually, one doesn't have that.) Follow the instruction on the web, there are detailed ways how to install the right drivers and run the bypass utility correctly.
In my case I had to format my device with the automatic flashing in SP Flashtool before the flashing worked, but that was it - my Redmi 9 is working fine again.
Click to expand...
Click to collapse
if my phone is bootloop and can't go into recovery mode either fastboot mode, can it be done ?
my phone bootloop after installing twrp and there you go bootloop until the end. can't go any mode also can't turn off the phone. any suggestion ?

daniel04222 said:
if my phone is bootloop and can't go into recovery mode either fastboot mode, can it be done ?
my phone bootloop after installing twrp and there you go bootloop until the end. can't go any mode also can't turn off the phone. any suggestion ?
Click to expand...
Click to collapse
I had the same issue, I was not able to enter neither recovery mode nor fastboot mode. But you are able to enter EDL mode, the Emergency Download Mode - in my case at least. From there I was able to unbrick the phone. I was able to enter EDL mode without opening the phone and using test points. Turning the phone on and connecting it to the computer in the same second as the screen goes on let me enter for some seconds, it was enough to let me run the tool to bypass the DAA and SLA protection of the device. Then I was able to flash back the stock firmware with SP-Flashtool. In my case I needed to format the device before the flashing worked, but then it booted back up alive.
Just be aware you probably need to install the proper drivers first to bypass DAA and SLA protection with LibUSB.

I have the same problem, help
I already tried all the methods in this post, my phone cannot access fastboot or recovery mode, and when I connect it via usb it starts immediately

iReebu said:
I had the same issue, I was not able to enter neither recovery mode nor fastboot mode. But you are able to enter EDL mode, the Emergency Download Mode - in my case at least. From there I was able to unbrick the phone. I was able to enter EDL mode without opening the phone and using test points. Turning the phone on and connecting it to the computer in the same second as the screen goes on let me enter for some seconds, it was enough to let me run the tool to bypass the DAA and SLA protection of the device. Then I was able to flash back the stock firmware with SP-Flashtool. In my case I needed to format the device before the flashing worked, but then it booted back up alive.
Just be aware you probably need to install the proper drivers first to bypass DAA and SLA protection with LibUSB.
Click to expand...
Click to collapse
Can you tell us how did you unbricked your device step - by - step? Sorry I am a newbie and do not know how to do it.

Alfredo_One said:
Tengo el mismo problema, ayuda
Ya probé todos los métodos en esta publicación, mi teléfono no puede acceder al modo de arranque rápido o de recuperación, y cuando lo conecto a través de USB, se inicia de inmediato.
Click to expand...
Click to collapse
Si hablas español podría ayudarte, te dejo mi FB
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Cualquiera que tenga ese problema en cualquiera de los dispositivos Xiaomi que hable español puede comunicarse conmigo y con gusto los ayudaré

Question Redmi note 10 5g bootloop

Today I wanted to upload Miui 13. I was uploading rom via MiFlashPro. After starting the phone's rom, it turns on all the time, displayed on the redmi logo, the moment at the beginning of the seconds bar, pixelated white after sharing, after three phones it restarts and from the beginning the redmi logo and the white bar pixel. the phone cannot be started in the mode recovery and fastboot. What can I do to save my phone? I am sorry for the mistakes, I use a translator

damianekgalka said:
Today I wanted to upload Miui 13. I was uploading rom via MiFlashPro. After starting the phone's rom, it turns on all the time, displayed on the redmi logo, the moment at the beginning of the seconds bar, pixelated white after sharing, after three phones it restarts and from the beginning the redmi logo and the white bar pixel. the phone cannot be started in the mode recovery and fastboot. What can I do to save my phone? I am sorry for the mistakes, I use a translator
Click to expand...
Click to collapse
Same happened to me, follow this tutorials:
MTK Bypass Universal
This one is for unlock the bootloader:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Download the phone firmware from here:
https://c.mi.com/oc/miuidownload/detail?guide=2

you have flashed the china version (or a version for another devices, sure not camellian). cause global fastboot version is not yet online. only recovery. you can install only via ota or twrp.

damianekgalka said:
Today I wanted to upload Miui 13. I was uploading rom via MiFlashPro. After starting the phone's rom, it turns on all the time, displayed on the redmi logo, the moment at the beginning of the seconds bar, pixelated white after sharing, after three phones it restarts and from the beginning the redmi logo and the white bar pixel. the phone cannot be started in the mode recovery and fastboot. What can I do to save my phone? I am sorry for the mistakes, I use a translator
Click to expand...
Click to collapse
same problem you can fix it?

ctvaldess said:
same problem you can fix it?
Click to expand...
Click to collapse
best fix is use brain before flash a rom. try with miflash pro. mtk tool is included. if pc detect device into fastboot mode or recovery you shold be able to tefladh stock firmware. otherwise only solution is assistance service. cause phone must be open

you can enter Meta Mode and Flash with SP Flash Tool with Your Region Stock Firmware

shinobusensui said:
you can enter Meta Mode and Flash with SP Flash Tool with Your Region Stock Firmware
Click to expand...
Click to collapse
if phone can enter in fastboot mode, is not necessary enter in meta mode. and try to explain to a user that didn't understand how flash stock rom with miflash, what are meta mode sp flash tool, scatter file... is a mission impossible

wetito said:
if phone can enter in fastboot mode, is not necessary enter in meta mode. and try to explain to a user that didn't understand how flash stock rom with miflash, what are meta mode sp flash tool, scatter file... is a mission impossible
Click to expand...
Click to collapse
there are times where it does not work well or gives an error or the package if it is inferior does not let you flash in assistance / fastboot mode if the Boot is not unlocked, I accidentally ruined my redmi note 10 5g and they gave me Another to Play and I managed to know things nobody explains many things to you, that is if even deleting bricked the imei you can recover the second