Hi, to anyone. Like One year ago mu friend gifted me this SM-A600FN because during charging It display "Could not do normal boot. INVALID KERNEL LENGHT" and when i Power on i can see only a turchese screen. I can enter download mode and Odin recognise It, but flashing a stock firmware FAIL. Specifically It FAIL during PIT partitioning. I tryed ti extract PIT file but It FAIL to partition. How i can solve? It can be a good secondary phone
PLEASE note Knox Is 0x00, but the friend Who gifted me used to work in a Lab and told me this phone was owned by a kid Who tryed to mod It, After the gifted to him and After he gifted to me
What version of stock firmware are you trying to flash? Usual Odin flashing of latest version gives such errors as described?
Download Samsung Galaxy A6 SM-A600FN LUX Luxembourg A600FNXXU9CVB1 firmware
Fast download latest Samsung Galaxy A6 firmware SM-A600FN from Luxembourg with A600FNXXU9CVB1 and Android version 10
www.sammobile.com
nqnxev said:
What version of stock firmware are you trying to flash? Usual Odin flashing of latest version gives such errors as described?
Download Samsung Galaxy A6 SM-A600FN LUX Luxembourg A600FNXXU9CVB1 firmware
Fast download latest Samsung Galaxy A6 firmware SM-A600FN from Luxembourg with A600FNXXU9CVB1 and Android version 10
www.sammobile.com
Click to expand...
Click to collapse
Recovery does not work
Related
Hope the following makes sense? I have tried nurmerious things through this great forum before posting!
1) Galaxy Samung S GTI9000
2) I put firmware on this last year now I have Galaxy 3 now I want to put stock rom back on galaxy s
3) I tried various stock roms but when I go into KIES it says its a KOR rom instead of UK rom and KIES wont update it
4) I them tried Check Fus Download to check I downloaded the right stock rom and let it download for me. It flashed ok via Odin3
5) If i go into about phone firmware = 2.3.6 baseland = I9000BUJV4, Kernel = 2.6.35.7-I9000BUJVG-CL71281 [email protected]#2. Build = GINGERBREAD.BUJVG
6) When I plug this into KIES it says "you device does not support software upgrading via Kies - Current firmware version: PDA:JVG / PHONE:JV4 / CSCV:JV5 (KOR)
Can some please help were i'm going wrong
And thanks for this forum its awesome!!!
you can flash stock firmware with odin
When I used the downloaded stock rom it flashed it sucessfully? via odin
You got wrong stock ROM.
Go to www.sammobile.com
Over there, select device (I9000), select region Europe, then select a ROM corresponding to UK or Great Britain (in the column country) and download it. Flash via Odin.
Sent from my GT-I9000 using Tapatalk 2
Tried as above used odin and it flashed ok, now when i check about phone it has the following firmware = 2.3.6 - baseline = I900XXJW4 KERNEL= .6.35.7-i9000XXJW4-CL1043937 [email protected]#2 AND BUILD NO:- GINGERBREAD.XXJW4
After it completed sucessfully I wiped the cache and reset the phone all came up ok, but whne i connect it to kies it still says PDA:JW4/PHONE:JW4/CSC:JW5 (KOR) Your device does not support softwareupgrading via Kies - Any help would be apprieciated
Because jw5 is a non official firmware( the laterst release) and there is no official release for sgs.i think the last official release is jvu
You have to flash the right stock ROM that is available in your country.
Download the right ROM for your country and flash it and make sure its not a custom or modded ROM.
Hope this would help.
http://www.hotfile.com/dl/154795243/b1970af/I9000XXJW4_I9000OXAJW5_XEU.zip.html
Here u go..
Don't forget to hit thanks!!
Sent from my GT-I9000 using Tapatalk 2
Downloaded the link flashed it again and still them same when I go into Kies PDA:JW4/PHONE:JW4/CSC:JW5 (KOR) Your device does not support softwareupgrading via Kies
Root.
Install nitrality, change csc corresponding to UK.
Unroot.
Have fun.
Sent from my GT-I9000 using Tapatalk 2
So I wanted to upgrade my firmware to the latest build, and having vast experience doing so, I downloaded from Sammobile.com the latest firmware build for my G800F and Odin showed "FAILED" with no error reported on the steps screen. Tried again, FAIL, swapped cables, FAIL.
I tried loading other firmwares...and nothing. The Download mode screen reads:
ODIN MODE
PRODUCT NAME: SM-G800F
CURRENT BINARY: SAMSUN OFFICIAL
SYSTEM STATUS: OFFICIAL
Secure Download: Enabled
KNOX WARRANTY VOID: 1
AP SWREV: A1
ASV GROUP: 7
Any ideas or suggestions?
-Paul
Try the Odin version contained in CF-Auto-Root
https://download.chainfire.eu/523/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminiltexx-smg800f.zip
Have no problem with G800F and this latest 4.4.2 (15 May 2015) G800FXXU1AOE3_G800FDBT1AOC1_G800FXXU1AOE3_HOME.tar
Use Odin with admin rights,
don't know if necessary, but clear your internal storage and wipe everything before flash with TWRP:
https://www.androidfilehost.com/?fid=23991606952600970
Paul_Days said:
So I wanted to upgrade my firmware to the latest build, and having vast experience doing so, I downloaded from Sammobile.com the latest firmware build for my G800F and Odin showed "FAILED" with no error reported on the steps screen. Tried again, FAIL, swapped cables, FAIL.
I tried loading other firmwares...and nothing. The Download mode screen reads:
ODIN MODE
PRODUCT NAME: SM-G800F
CURRENT BINARY: SAMSUN OFFICIAL
SYSTEM STATUS: OFFICIAL
Secure Download: Enabled
KNOX WARRANTY VOID: 1
AP SWREV: A1
ASV GROUP: 7
Any ideas or suggestions?
-Paul
Click to expand...
Click to collapse
Had the same on G800H while flashed latest Stock ROM published on sammobile.. finally the following steps a working (in my case)
flashing the stock firmware through Odin (ignore failed message)
take off the battery and put it back in
boot into Download mode.
flashing the twrp recovery
Reboot normal
The rom is now updated and had no problems with it (flashed it on this way 2 weeks ago)
+1 Worked like a Charm thanks "mind"
But now I have a new issue....I'm getting "Warning. Camera Failed".... this is like...a nightmare....damn.
- Paul
mindestens said:
Had the same on G800H while flashed latest Stock ROM published on sammobile.. finally the following steps a working (in my case)
flashing the stock firmware through Odin (ignore failed message)
take off the battery and put it back in
boot into Download mode.
flashing the twrp recovery
Reboot normal
The rom is now updated and had no problems with it (flashed it on this way 2 weeks ago)
Click to expand...
Click to collapse
Hello this method worked for me. Thank you. May I ask what version of TWRP this file https://www.androidfilehost.com/?fid=23991606952600970 is?
I am confused as after putting this via ODIN I still have stock android recovery when pressing VOL+ & HOME & POWER
best regards
pablocool said:
Hello this method worked for me. Thank you. May I ask what version of TWRP this file https://www.androidfilehost.com/?fid=23991606952600970 is?
I am confused as after putting this via ODIN I still have stock android recovery when pressing VOL+ & HOME & POWER
best regards
Click to expand...
Click to collapse
i have no idea @pad11 posted this link
I would liked to flash optimalrom
1st step flash firmware with odin
odin failed
device galaxy tab s2 t810
before this
official android 5.0.2
flashed CF-autoroot - Galaxy Tab S2 - SM-T810 and TWRP 2.8.7.x Lollipop 5.0.2 - SMT810
and works fine
failed odin picture atteched
no I cant go to twrp, i cant reboot, only I can to download
- update -
flashed cf root again, and twrp 3
now work and boot again, but firmware with odin dont work
please help
Just flash the stock oh7 firmware for your device region then Optimal rom.
ashyx said:
Just flash the stock oh7 firmware for your device region then Optimal rom.
Click to expand...
Click to collapse
wher can i find oh7 firmware?
my device region Germany
thank for the reply
kondor21 said:
wher can i find oh7 firmware?
my device region Germany
thank for the reply
Click to expand...
Click to collapse
Sammobile.com
ashyx said:
Sammobile.com
Click to expand...
Click to collapse
my tablet region German, and a latest firmware for 5.0.2 on sammobile T810XXU2APB2
so how flash the 5.1.1 T810XXU2BOJ1 or optimalrom firmware?
or how to change my tablet region?
problem solved???
I flashed other region 5.1.1 firmware, and official 5.1.1. works fine
but if flash a optimal rom cant boot, optimal firmware faild again
so now i trie root and install xposed the official rom
Hallo im sorry for my bad english im from germandy but this the best forum for my problem.
I have buy a Samung A505Fn with a bootloop, i have flash the 4Files firmware with odin without problems, it reboot after flash but it stucks at the Samsung logo
justin061102 said:
Hallo im sorry for my bad english im from germandy but this the best forum for my problem.
I have buy a Samung A505Fn with a bootloop, i have flash the 4Files firmware with odin without problems, it reboot after flash but it stucks at the Samsung logo
Click to expand...
Click to collapse
If you are certain you have the correct firmware for it, flash it again, if you have twrp, go straight into it after flashing and do a and factory reset. Also, be patient.
This is the thread for your device btw,
Samsung Galaxy A50
The Samsung Galaxy A50 is a 6.4" phone with a 1080x2340p resolution display. The Exynos 9610 Octa chipset is paired with 4/6GB of RAM and 64/128GB of storage. The main camera is 25+8+5MP and the selfie camera is 25MP. The battery has a 4000mAh capacity.
forum.xda-developers.com
justin061102 said:
Hallo im sorry for my bad english im from germandy but this the best forum for my problem.
I have buy a Samung A505Fn with a bootloop, i have flash the 4Files firmware with odin without problems, it reboot after flash but it stucks at the Samsung logo
Click to expand...
Click to collapse
just check properly if rom is for your model or not
because Samsung have many model under same name.
like samsung j1 120g is exynos
and samsung j1 120h is spectrum phone
so look carefully and flash it all will work out.
i have the right firmware, but it also stocks at the logo.
bro, try flash file from this website, and please check that file is for your country or not.
Samsung SM-A505FN Stock Firmware ROM (Flash File)
Download the official Samsung SM-A505FN Stock Firmware ROM (Flash File) for your Samsung Mobile. We also provide all other Samsung Stock Firmware for free.
firmwarefile.com
and use odine 3.13.3 for flashing file.
Not Off Topic
i have Flash the right firmware, yesterday after the flash the phone is starting the Samsung boot animation but it have not boot into Android and now it’s also stocks at the logo
Bhanu8082 said:
bro, try flash file from this website, and please check that file is for your country or not.
Samsung SM-A505FN Stock Firmware ROM (Flash File)
Download the official Samsung SM-A505FN Stock Firmware ROM (Flash File) for your Samsung Mobile. We also provide all other Samsung Stock Firmware for free.
firmwarefile.com
Click to expand...
Click to collapse
The firmware for my phone are not there I need the firmware for Switzerland, but I have already download it from Sammobile
So I had Pixel Experience on my Note 5. I decided i did not like it, so I flashed stock rom on Odin without knowing the region. I live in Dubai so the region I selected was "XSG". I flashed it on Odin, and it is now stuck on the bootloop. Please help. Did I do something wrong??
Diagnostic Details (if this helps)
Version of Odin I used: Odin 3B PatcheD/ModdeD - v3.14.1
Odin had frozen/not responding during the flash process, but it flashed fine on Odin.