Hey everyone,
after spending about 5 hours trying everything I could think of and what I found in all kinds of forums, I'll try here before the phone is gonna be burried.
Got a "dead" P10 from a friend - booted straight to an error page with the headline "Your device has failed verification and may not work properly." My guess is that it was supposed to be updated, didn't have enough memory and then crashed.
Here's what I tried:
Factory reset - aborts at about 25%.
Download of a new firmware version via WLAN - aborts
Upload via SD-Card (dload) - firmware update failed
The phone is not recognized on the PC - so wouldn't know how to flash it from there.
I can still access it via fastboot, but I actually don't now how that could help me
Can anyone think of anything else that could be done?
LG
Maxi
Somebody got any idea?
Related
hi guys,
im using the LGFlash Tool to flash stock firmware onto my D958 and i keep getting a "failed PreviousLoad()" error before it even starts, i have made sure the file is for the correct model and everything, just don't understand why i am getting the error because i am following all the tutorials properly.
PLEASE HELP!!!!My phone has been bootlooping for the past few days, after i tried to install an ota update i jst got, and i can only access download mode, no reset
It is okay i fixed it by deleting the registry entries by the for the program.....
Bad download.
Hi
This morning I got the notification on my XT1092 GB/UK Model that Lollipop was available so I accepted the update.
The phone downloaded the package, rebooted but now it won't start. All I'm getting is the android with red exclamation mark on "No Command." I've tried following the help on the Motorola site that suggests wiping the partition cache but it's not helped. It's still rebooting all the time.. Now I'm stuck...
What do I need to do to recover the firmware? Is there any way I can get the GB Retail firmware from somewhere and side load it using a cable?
Many thanks
Simon
Update, I have got into recovery mode and got to the point where I can use ADB - drivers installed on computer and I have downloaded
RETGBALL_XT1092_5.0_LXE22.46-19_cid7_CFC.xml.zip
I tried to sideload the above file which uploads fine through ADB but then I get the following:
Finding update package...
Opening update package...
Verifying update package...
Installation aborted.
What am I doing wrong here? This is a GB XT1092 model so the above lollipop firmware is the only one available for this phone as far as I'm aware.
Anyone?
transmission1 said:
Update, I have got into recovery mode and got to the point where I can use ADB - drivers installed on computer and I have downloaded
RETGBALL_XT1092_5.0_LXE22.46-19_cid7_CFC.xml.zip
Click to expand...
Click to collapse
Where did you get hold of that from? I'm in a similar situation and I've been looking for the stock image to recover everything from...
Hi, I need help with my huawei p9, when I power up and the system start, a screen says Encryption Unsuccessful, and that I should do a factory reset for resume using the phone. I do the cleaning in TWRP and I install fRomFuture - NewWorld V4.1, the installation is performed without errors, but the message remains.
How could resolve this situation?
PS: sorry for my English
I have similar problem
Hi, I have the same thing here, but it has stock recovery, which I can't boot into. I can get to Encryption unsuccessful screen and to fastboot. It is customers phone, he was messing around with SW, and I think he didn't allow oem unlocking, debbugging is disabled aswell I think. I can't flash anything to it, whatever I try I get 'FAILED (remote: command not allowed). Tried force-flashing it via SD card, it gets stuck at Huawei logo. Any thoughts? Or to tell him to use it for smashing nuts?
Hi, I've got a problem with booting and generally doing anything on my phone - only erecovery is working right now. I've tried to install 7.0 update - and it got the NRD90M rom instead of b361 or b360 - then I've tried to do an update via dload - however, it failed - I read somewhere to flash extracted files like system, recovery (and sth else) via adb - i did it and now i've got nothing. Are there any posibilities to get my phone back? to install software? I've tried to install twrp but it also failed - i mean i can use adb in erecovery mode but i can't turn twrp on - 'device is booting'... Any ideas? (Sorry for my english)
Hi
So I've been trying to set my P9 Plus back to stock, unless I experienced an unknown error during the flash and I got stuck outside the OS, with the black screen warning me that " the phone is unlocked and it can't be trusted". I tested some other firmware but no luck, also for some reason now I can't even access the TWRP. I'm stuck even outer at the moment, I can access only the white bootloader. I since tried to flash TWRP again, following this guide https://forum.xda-developers.com/p9/how-to/huawei-p9-brick-easiest-to-unbrick-t3662348 for the update extractor, but from adb/fastboot I get the FAILED (remote: Command not allowed) error. Looked for most of the solutionfor this step but none of them worked.
I gave a chance to the HWOTA7 tool, to HiSuite, to automatic update too, no progress at all
What could be the next move?
Thanks a lot for the support
Same
Exactly same issue here. Phone boots (when it wants to) but unresponsive (apps won´t open).
Somehow either partition became read only or partition completely gone.
Micro sd download gyári Rom