I think I've softbricked my Redmi Note 10 Pro. I've flashed the stock MIUI 13 Global ROM with the MiFlash tool and it failed at the end with an error about sparse files.
After rebooting, it got stuck in an orange Fastboot logo. Pressing Volume Down + Power just restarts, back into this orange Fastboot logo.
MiFlash no longer detects it. XiaoMiTool V2 also doesn't detect it.
I need this phone desperately. Please help what to do.
OK, after rebooting my PC, I could flash it again.
During the first flash I made the mistake to select "Save user data" which probably caused the error.
The flash worked second time with "Clean all". I did fail at the end with "not catch checkpoint", but apparently that's not a big deal. It works.
Related
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
I ve little same issue. need help too.
I have Mi A2 runnig on android8.1
but it didnt update 9.0
so I try with twrp but fail no boot anymore.
I use miFlash tool. accdently I locked phone. flashed rom didnt boot.
now I ve just fastboot mode. or open 'android one' screen and then goes black.
I try EDL mode by test point inside phone.
flash with 2018 mi Flash tool but stuck in flashing...
flash with 2016 mi Flash tool write succesful flashed afte 6min. but not boot.
I read 2 days on forums. cant find anything to do.
is there any solution?
thanks
Hi, has anyone made any progress?
Theduardds said:
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
Click to expand...
Click to collapse
A year ago i had the same issue kinda. The only thing that worked for me was flashing mi 6x stock rom and after some trial an error it flashed and it fixed. The only problem is i have a mi 6x forever. Basically download mi 6x stock rom. Try that mi flash tool and keep hard rebooting and click flash button right after it vibrates. If lucky sometime will work and flash. If nothing try older versions of mi flash tool. Good luck.
all of you have the same problem ... you bootloop into edl mode because you have ARB4 triggered ..that means the only stock you can flash in miflash is ARB4 rom ( latest most up to date )
you also need patched programmer file since flashing ARB4 requires miui account
the fix to this problem is documented everywhere and explained lots of times ...just read ..follow this guide and one-click tool to unbrick
next time read ......a little ..
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Hello guys, so, today i was trying to install miui 9 in my mi a2, then later going to update to miui 10. I was trying to install by flash mode (XiaoMiFlash) Everything was going fine, until my windows accidently turned off for updates (RIP). When my pc turned on, i was desperately opening miflash as fast that i could, but then when i try to install again it was saying "cannot recieve hello packet". I tried to restart it thinking that would fix it, but its just stuck in a MI logo with mi.com screen(Bootloop). I was trying to unplug usb cable and then putting again trying to fix it, clicking refresh to see if it appears, but it doesn't. Same with fastboot mode, doesn't get recognized. I really need help to fix it and sorry if i wrote something wrong, english is not my native language.
Same problem happened with me today. Any Solution?
Are you able to boot into fastboot?
Something similar happened to me once with the A2.
I somehow too managed to interrupt some update process and got stuck in the same scenario.
I could resolve it by getting one of these now superseded fastboot stock files with some installer scripts in them.
The scripts also wouldn't work, but I could install the firmware files one by one manually, following the script's content.
First off though, you could try to get into fastboot mode (as mentioned before), boot the official twrp img and flash the latest firmware zip file from here
Then you could go ahead and flash miui for the A2 like any other custom ROM (or did you just post in the wrong section and actually got an 6X? - seeing that you used miflash, it really seems like it..
Just in case here is the right thread for downloading miui for the A2: A2 miui port)
Yaroray said:
Are you able to boot into fastboot?
Click to expand...
Click to collapse
Hey, sorry for not awnsering for a long time. Yes, i can enter in fastboot, but the problem is that my MI A2 doesn't get recognized. (nothing happens if i try to flash it in fastboot mode).
i same that trouble, i can try to bootloader but when i connect usb to my pc it not recognized, i don't run anycommand from my PC,
I think if i change to second slot i will boot my phone, and i want to change slot without command "fastboot set active-slot "
Yesterday I unlocked my phone with the official Xiaomi unlock tool, Then it wiped everything, after setting my phone up, I flashed TWRP (not for my device but for redmi k20, I thought 9T and K20 is the same) and now I'm stuck on fastboot, I tried power button + volume buttons but still stuck on fastboot, I tried adb but still stuck, I tried Reiboot for Android but still stuck. So I used XiaoMiTool V2 (unofficial) and selected 'my device is bricked' then it asked me to select what device am I using, I selected k20 bc I thought it's the same with redmi power, after downloading a rom for an hour, it tries to install but fails because it detects that it's not k20, so I closed it and rebooted my device, now my device only shows the charging battery icon, can't boot into fastboot, can't boot into anything, PC can't detect my phone including adb. Please help me (for free), I really need your help. Thanks!
Your mistake was booting a wrong twrp and then a wrong fastboot rom. You could have saved your device when it was in fastboot mod by flashing an official fastboot rom for your device. But now your device seems hopeless. I think you have no option but to send it to a service center.
In this Case, buy only from Trusted Places! Or Learn how to Flash properly.
If the bootloader is unlocked...
Flash vbmeta.img
Then flash the suitable recovery for 9 power... It might boot to recovery then
I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....
GAGANKXDA said:
I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....Firs
Click to expand...
Click to collapse
GAGANKXDA said:
I was trying to update Indian Version 13.0.3.0.SKLINXM TO Global Version 13.0.8.0.SKLMIXM downloading Fastboot ROM but unfortunately several tries failed with "flash super error (remote check sparse crc')" via both i.e., MiFlash & direct clicking on "flash_all.bat" but nothing worked & after a while it rebooted on its own & stuck on "DM-Verity Corruption screen.
Unfortunately, neither it is booting into Fastboot Mode nor into Stock Recovery now...... help would be grateful.....
PS: This is not the first of time when i'm flashing & using a custom rom so i know basic know-how about it....
Click to expand...
Click to collapse
First of all It had happened with me several times 5 days back. It is the issue of some of the fastboot roms .I also flashed my redmi note 10S to 12.5.5 global because it was too much buggy in miui13 India version.
All you have to do is :-
{If your bootloader is unlocked
you may skip this steps}
1. unlock bootloader instantly from MTK tool using a pc .Watch videos from yt
2. Download 12.5.9 fastboot global rom It is error free { I am on this rom }
Then flash it using miflash tool
Then you may update to miui 13 from OTA itself
Himanshu98010 said:
First of all It had happened with me several times 5 days back. It is the issue of some of the fastboot roms .I also flashed my redmi note 10S to 12.5.5 global because it was too much buggy in miui13 India version.
All you have to do is :-
{If your bootloader is unlocked
you may skip this steps}
1. unlock bootloader instantly from MTK tool using a pc .Watch videos from yt
2. Download 12.5.9 fastboot global rom It is error free { I am on this rom }
Then flash it using miflash tool
Then you may update to miui 13 from OTA itself
Click to expand...
Click to collapse
Thanks but to update 12.5.9 via miflash tool i need to boot phone into fastboot mode which is not happening either..... it keeps restarting with "DM-Verity Corruption" error.. please help if you can..
And, my bootloader is already unlocked..
GAGANKXDA said:
Thanks but to update 12.5.9 via miflash tool i need to boot phone into fastboot mode which is not happening either..... it keeps restarting with "DM-Verity Corruption" error.. please help if you can..
And, my bootloader is already unlocked..
Click to expand...
Click to collapse
LET the phone be completely poweroff
press and hold powerbutton and volume down key simultaneously
Fastboot Logo appears*
Himanshu98010 said:
LET the phone be completely poweroff
press and hold powerbutton and volume down key simultaneously
Fastboot Logo appears*
Click to expand...
Click to collapse
Trust me Himanshu bhai, i have been trying this since yesterday..... it seems to an end to me now.. phone not letting it into fastboot or either into stock recovery..
I think You dont have an unlocked bootloader .
Does it continuosly restarts without any instructions given to it ??
Do you have a PC available ?
And yes one more thing That Dm verity error goes off when you press power button and the system boots to your miui rom ( if your flashing was successful
Himanshu98010 said:
I think You dont have an unlocked bootloader .
Does it continuosly restarts without any instructions given to it ??
Do you have a PC available ?
Click to expand...
Click to collapse
yes, indeed it is unlocked.. it gives a sign on unlocked lock at the top while auto reboot.. please see the attached picture & sorry for the background noise in the video..
I'm on PC itself now, trying to figure out solution....
Himanshu98010 said:
And yes one more thing That Dm verity error goes off when you press power button and the system boots to your miui rom ( if your flashing was successful
Click to expand...
Click to collapse
unfortunately i'm not able to boot into fastboot so i'm out of question for flashing any rom till this sorted out :'(
GAGANKXDA said:
unfortunately i'm not able to boot into fastboot so i'm out of question for flashing any rom till this sorted out :'(
Click to expand...
Click to collapse
Please try this method once and see if it works
Is it charged ??
Himanshu98010 said:
Is it charged ??
GAGANKXDA said:
yes, indeed it is unlocked.. it gives a sign on unlocked lock at the top while auto reboot.. please see the attached picture & sorry for the background noise in the video..
I'm on PC itself now, trying to figure out solution....
Click to expand...
Click to collapse
Press the power button once or twice when the error or The unlocked symbol pops up
Click to expand...
Click to collapse
Himanshu98010 said:
Is it charged ??
Click to expand...
Click to collapse
Come on man it is charged... btw complete message says as follows:
=================
dm-verity corruption
Your device is corrupt.
It can't be trusted and may not work properly.
Press power button to continue.
Or, device will power off in 5s
=================
This is the problem, no matter what i press it reboots & continue to flash this message as shown in previous video, whether or not i press power button..
however, i have observed that PC is deducting phone merely for some seconds when screen goes completely off while auto reboot.... highlighted in picture
You must press and hold power button and volume down quicky as soon as the screen goes off while auto reboot.
My problem was not this fatal . Still I was scared as I was doing it for the first time .
I've had a Redmi Note 10S for almost 1 year now and it has always worked well, but not long ago, my phone for no reason, keeps bootlooping and not booting. I tried to factory reset it but MiUi Recovery tells me "Failed To Wipe Data", after that I tried to flash it in FastBoot mode with MiFlash and its original firmware but I get timed out by 700 seconds. I've never installed a custom ROM on it or unlocked the Bootloader so it's really strange for me who doesn't have any problem with this phone before. I also noticed that when I connect my pc and phone in FastBoot mode, I hear the Windows device disconnect sound repeatedly. If you could help me or just give me some suggestions I'm open to anything
install fastboot drivers and flash
tutibreaker said:
install fastboot drivers and flash
Click to expand...
Click to collapse
Hi and sorry for the late responce, i've already, same result, i think this is the internal drive who broke
look like u must flash it using brom ans spflastool for a total rewrite of the system