Related
Has anyone managed to enable the Full-Port Switch on a Realme Device yet?
This is needed to configure the LTE Modem to enable a matching carrier profile that supports VoLTE.
I have the Qualcomm QPST PDC programm and know how to do it on a Oneplus device.
But I can't enable serial mode and the Full-Port Switch on my Realme X2 Pro.
Polarfuchs said:
Has anyone managed to enable the Full-Port Switch on a Realme Device yet?
This is needed to configure the LTE Modem to enable a matching carrier profile that supports VoLTE.
I have the Qualcomm QPST PDC programm and know how to do it on a Oneplus device.
But I can't enable serial mode and the Full-Port Switch on my Realme X2 Pro.
Click to expand...
Click to collapse
Just do it without the serial port ON also can enable the volte and vowifi.
dioooi said:
Just do it without the serial port ON also can enable the volte and vowifi.
Click to expand...
Click to collapse
How?
Is there a "easy" way to do it?
I've read you must enable the diag/serial mode via editing the build.rop
how do you do it? ive been trying to figure it out.
Here is the tutorial I found.
The code to enable serial mode is in the 2nd code box.
https://www.android-hilfe.de/forum/...tung-volte-vowifi-aktivieren-root.938058.html
diag mode for realme x2 pro
nvm its fixed
There is any way to do this without root? In stock rom?
Is there anyone have video tutorial to repair imei without using any paid apps? I can't understand the procedures by only reading the steps. Pleasee help me fix my phone
Looks like you're yet another one of those victims of that outdated twrp tutorial that bricked our phones. That thing should be deleted. Anyways read these whole threads ujust in case
[ENGINEERING][ROM][OFFICIAL] OFFICIAL Engineering Firmware for LANCELOT (Redmi 9 / Redmi 9 Prime)
Works with: - Xiaomi Redmi 9 - Xiaomi Redmi 9 Prime Build Date: 2020/06/23 Android Version: QP1A.190711.020 Display ID: AL2615-lancelot-V011-Q-0623 Build Fingerprint: Redmi/lancelot/lancelot:10/QP1A.190711.020/6:userdebug/test-keys Security...
forum.xda-developers.com
or
[V1][ENGINEERING][ROM] OFFICIAL Engineering Firmware for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Version 1 Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Build Date: 2020/05/13 Android Version: QP1A.190711.020 Display ID: AL2522-Merlin-V039-Q-0513 Build Fingerprint...
forum.xda-developers.com
[ENGINEERING][ROM][OFFICIAL] OFFICIAL Engineering Firmware for LANCELOT (Redmi 9 / Redmi 9 Prime)
Works with: - Xiaomi Redmi 9 - Xiaomi Redmi 9 Prime Build Date: 2020/06/23 Android Version: QP1A.190711.020 Display ID: AL2615-lancelot-V011-Q-0623 Build Fingerprint: Redmi/lancelot/lancelot:10/QP1A.190711.020/6:userdebug/test-keys Security...
forum.xda-developers.com
Download ModemMeta Tool (all versions) - Mediatek IMEI Tool
Download the latest version of ModemMeta Tool to flash IMEI, backup IMEI and repair IMEI, NVRAM on MediaTek smartphone and tablets.
androidmtk.com
^use that for imei repair, you have to have the sim card in slot 2 and not put anything for IMEI 1. My cell signal sucks now for some reason I still havent figured out. but calls work now and dont cut off after 30 seconds at lest.
Oh and yes you need to be in the engineering rom to use that modemmeta tool.
I struggled for a while because I thought that merlin was the same as lancelot so I was using the wrong roms. I forgot if I had to flash back to the original rom.
These are some of the files in my "bricked" folder
LANCELOT_Engineering_AL2615-lancelot-V011-Q-0623_QP1A.190711.020_by-VD171
lancelot_global_images_V11.0.4.0.QJCMIXM_20200618.0000.00_10.0_global
SP_Flash_Tool_v5.2020_Win
VD171_MTK-bypass-v1.5
LibUSB-Win32
MiFlash20210226
miflash_unlock-en-5.5.224.55
Mediatek_USB_Driver_Auto-Installer_5.1632.00
Oh and if you are going to install a recovery, just do the SHRP recovery.
SHRP - Browse /lancelot at SourceForge.net
SKYHAWK Recovery Project
sourceforge.net
After going back to the stock lancelot rom, i just updated the rom as normal to 12.05 then installed magisk as usual, later on installed that recovery and it works fine. It even has options in it so the bootloader doesnt get overwritten by miui
mrhanky89 said:
Looks like you're yet another one of those victims of that outdated twrp tutorial that bricked our phones. That thing should be deleted. Anyways read these whole threads ujust in case
[ENGINEERING][ROM][OFFICIAL] OFFICIAL Engineering Firmware for LANCELOT (Redmi 9 / Redmi 9 Prime)
Works with: - Xiaomi Redmi 9 - Xiaomi Redmi 9 Prime Build Date: 2020/06/23 Android Version: QP1A.190711.020 Display ID: AL2615-lancelot-V011-Q-0623 Build Fingerprint: Redmi/lancelot/lancelot:10/QP1A.190711.020/6:userdebug/test-keys Security...
forum.xda-developers.com
or
[V1][ENGINEERING][ROM] OFFICIAL Engineering Firmware for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Version 1 Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Build Date: 2020/05/13 Android Version: QP1A.190711.020 Display ID: AL2522-Merlin-V039-Q-0513 Build Fingerprint...
forum.xda-developers.com
[ENGINEERING][ROM][OFFICIAL] OFFICIAL Engineering Firmware for LANCELOT (Redmi 9 / Redmi 9 Prime)
Works with: - Xiaomi Redmi 9 - Xiaomi Redmi 9 Prime Build Date: 2020/06/23 Android Version: QP1A.190711.020 Display ID: AL2615-lancelot-V011-Q-0623 Build Fingerprint: Redmi/lancelot/lancelot:10/QP1A.190711.020/6:userdebug/test-keys Security...
forum.xda-developers.com
Download ModemMeta Tool (all versions) - Mediatek IMEI Tool
Download the latest version of ModemMeta Tool to flash IMEI, backup IMEI and repair IMEI, NVRAM on MediaTek smartphone and tablets.
androidmtk.com
^use that for imei repair, you have to have the sim card in slot 2 and not put anything for IMEI 1. My cell signal sucks now for some reason I still havent figured out. but calls work now and dont cut off after 30 seconds at lest.
Oh and yes you need to be in the engineering rom to use that modemmeta tool.
I struggled for a while because I thought that merlin was the same as lancelot so I was using the wrong roms. I forgot if I had to flash back to the original rom.
These are some of the files in my "bricked" folder
LANCELOT_Engineering_AL2615-lancelot-V011-Q-0623_QP1A.190711.020_by-VD171
lancelot_global_images_V11.0.4.0.QJCMIXM_20200618.0000.00_10.0_global
SP_Flash_Tool_v5.2020_Win
VD171_MTK-bypass-v1.5
LibUSB-Win32
MiFlash20210226
miflash_unlock-en-5.5.224.55
Mediatek_USB_Driver_Auto-Installer_5.1632.00
Oh and if you are going to install a recovery, just do the SHRP recovery.
SHRP - Browse /lancelot at SourceForge.net
SKYHAWK Recovery Project
sourceforge.net
After going back to the stock lancelot rom, i just updated the rom as normal to 12.05 then installed magisk as usual, later on installed that recovery and it works fine. It even has options in it so the bootloader doesnt get overwritten by miui
Click to expand...
Click to collapse
Hello, they said if you go back to miui the written imei will be lost again? How to back up that and restore sir?
kazuhiko23124 said:
Hello, they said if you go back to miui the written imei will be lost again? How to back up that and restore sir?
Click to expand...
Click to collapse
How to Backup and Restore IMEI/NVRAM data on Mediatek Chipset Android Device
Alright, so you have an Android Device which has a Mediatek Chip inside. It looks like that you are not someone who uses their Android Device for basic
www.getdroidtips.com
The spflashtool option in the video was the simplest for my situation though.
I never went back to restore the imei from nvram. I just went back to the stock lancelot rom and the info was saved. When I went to the rom the imei was there in the about section phone status.
If I used miflash i chose the clean all option. Remember not to lock it.
And if I used sp flash tool i used firmware update or download mode. NOT Format ALL. I think that is why my imei may have been deleted at first.
If you manage to put that recovery there is an option there to restore from NVRAM
mrhanky89 said:
How to Backup and Restore IMEI/NVRAM data on Mediatek Chipset Android Device
Alright, so you have an Android Device which has a Mediatek Chip inside. It looks like that you are not someone who uses their Android Device for basic
www.getdroidtips.com
The spflashtool option in the video was the simplest for my situation though.
I never went back to restore the imei from nvram. I just went back to the stock lancelot rom and the info was saved. When I went to the rom the imei was there in the about section.
If I used miflash i chose the clean all option. Remember not to lock it.
And if I used sp flash tool i used firmware update or download mode. NOT Format ALL. I think that is why my imei may have been deleted at first.
If you manage to put that recovery there is an option there to restore from NVRAM
Click to expand...
Click to collapse
So I can use miflash to go back to stock rom? What is your recommended version of miui sir?
kazuhiko23124 said:
So I can use miflash to go back to stock rom? What is your recommended version of miui sir?
Click to expand...
Click to collapse
Yes you should be able to use miflash in fastboot if your bootloader is already unlocked. I don't know what version of miui is best. I just went back to the stock rom and then updated. I am going to play around with custom roms now. I don't like all the xiaomi stuff. You can uninstall a lot of it with xiaomiadbfastboottools
mrhanky89 said:
Yes you should be able to use miflash in fastboot if your bootloader is already unlocked. I don't know what version of miui is best. I just went back to the stock rom and then updated. I am going to play around with custom roms now. I don't like all the xiaomi stuff. You can uninstall a lot of it with xiaomiadbfastboottools
Click to expand...
Click to collapse
Another question sir, when entering in meta mode I will just turn off my phone or go to fastboot?
kazuhiko23124 said:
Another question sir, when entering in meta mode I will just turn off my phone or go to fastboot?
Click to expand...
Click to collapse
You might have to turn it off while it is connected to that program. Or maybe fastboot. I forgot exactly but I recall something about turning it off. Remember it has to be on the engineering rom for your device or else it will not work.
mrhanky89 said:
You might have to turn it off while it is connected to that program. Or maybe fastboot. I forgot exactly but I recall something about turning it off. Remember it has to be on the engineering rom for your device or else it will not work.
Click to expand...
Click to collapse
Thank you sir, I will update if I am able to fix my imei 2
Help me
my bootloader is locked and i lost my imei
I've tried to flash the ENG ROM but I keep getting my 100% DA ERROR error message
have watched all tutorials how to fix imei but it didn't solve my problem
Hi,
Does anyone can help me with my problem?
I have a redmi 9t (abouth 8 month) and all worked fine until a miui update.
After the update i cant connect to a network. Only wifi works.
I have tried everything i could find online to try to solve my problem, even factory reset. Nothings work . So i tried to unlock the bootloader to try to flash a costum rom, but becouse i have no mobile data i cannot unlock it becouse you need mobile network to do so.
Contacted local miui support, but they could not help me becouse of the regional boundings.(belgium over here) Tried to contact the online shop where i bought my phone. But they are not online anymore. So my question is:
Anyone now how fix my network and or unlocking my bootloader without mobile date.
I'm getting desperate .
Greetings, just a man who want to use his phone to call again.
OK. First don't worry. You can flash your mobile without Unlocking Bootloader. If your Phone is "lime", It is based on Qualcomm Snapdragon CPU. You can try the QFIL Tools By Qualcomm Official. You need to have your phone in the Deep Flashing Mode. And Download the Official MIUI Image to flash it (I am Chinese) so you can go to the link here and download the ROM. flashing it with QFIL.
Good Luck to you.
2022-5-23 I'm using an Redmi 9T with MIUI13. IIf you still don't understand, you can ask me again.
Please, can some one help me to remove or Bypass Demo Mode on TCL 10 5g T790Y ?
Thanks in advanced
This method should also work on your model
TCL 10 Pro demo remove?
Any update on this would be great facing the same issue...
forum.xda-developers.com
Thanks DoctorBooty, i have try the method but when i uninstalled the packages the phone can not startet again and boot loop only. it s there any other method? Maybe flasching ´the phone?
If there is I'm not aware.
Unfortunately it's currently not possible to flash / unlock the bootloader this model
So, I hard bricked this phone once and after following the hard brick tutorial here I managed to get it working, however this seemed to change my phone model from M2003J15SG to M2003J15SC, I'm not exactly sure if this started when I unbricked the device OR when I installed miui 13 but, after flashing miui 11 it still says the wrong model, does anyone know how to fix this??
What tool are you using to verify the phone's model number? Each app looks for a different value so the result is always different. The MIUI FW should be the same for all Redmi Note 9 models. For me, it only says merlinnfc. It may also change once you spoof your device or apply a safetynet-fix.