Database Develop

New case!

OK then,
I was going to get a new housing for my sad looking Ameo. They come in the standard Ameo silver or a rather smart HTC black. I already have a silver case, but here is the question.
Do the black housings, wear, scratch, or paint rub away easy? I don't want to get one and find it looks crap after six months. They ain't cheap! before anyone else says it, I know it depends how you treat it. I'm on about normal wear and tear use. How does yours look now? are there any signs of the metal underneath showing?
Regards
Jay

Black Case On The "advantage"...
Hey Jay,
I have a HTC Advantage x7501, with the black case of course, and have been using it with "typical" every-day use now for about 6 months. I have never even seen one of the silver cased "Ameo" versions of the device in person, so my review is a bit "one-sided," if you will... Also, I have a friend with whom I work with that also owns the same model as I. With saying all that, and without having experienced the silver model, I would bet the silver model would hold up a bit better on the finish due to the fact that if the silver gets scratched, the metal beneath it looks much closer to the silver finish than the black. I have a couple small blemishes on mine, and I am very particular with my mobile devices, but after using day-by-day at work and home, it has managed to get marked up just a bit. The biggest problem is, if you get a scratch on it, the metal below sticks out "like a sore thumb!"
I definitely believe that the black finish is a bit more professional looking, where sometimes the silver finishes can make a device look cheap or make it stand out.
Anyways, to give you my honest account on TWO Advantage x7501 devices (black finish) after 6 or so months of daily use, it is overall good, and neither one shows any major signs of wearing finish. Also, we both use a case that the device "slides" tightly in and out of each time you use it (without the keyboard attatched), and the device really hasn't shown any real signs of wear on the sides where it rubs the case. However, if you do happen to mark it up in any way, you will definitely notice it. Again, I am very picky, so keep that in mind, but so you have a better idea of what I am saying, I attatched a couple of pics so you can see what it looks like when or if you do scratch or mark it.
HOPE THIS HELPS!!!
-Ryan
Also Note: Only one of the devices I wrote about is pictured, but are very similar in condition, and were both purchased slightly used.

X7501 Cosmetics...
I have had my X7501 for almost 10 months now and it only has one very tiny mark on the top right corner (you have to look hard to even see it).
Since I'm also very particular about my devices (I always keep them looking new) I just used a Sharpie (permanent marking pen) to "erase" the offending mark. This works great and I would recommend it to anyone wanting to touch-up black anodized aluminum like the Athena housing.

Wow! thanks for the reply Guys, Ryan that was one hell of a reply. Must have took you a while to do that and I appreciate it. toyfreak, the idea with the marker pen is a great one. I think on just that idea alone I will get black. Its harder to touch up silver! It looks better too.
Regards
Jay

Indeed is surprisingly hard coating, I carry mine in my pockets and can't say I'm careful with it, rather the opposite, I have it since it came out and there is only a little wear in one of the corners, hardly noticeable, where the scratches are more visible, is on the silver border next to the screen, not that it look bad or anything.

Black housing - Where?
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM

Silver / AMEO
Hi guys,
Proud owner of a wonderful brick since 6 months in grey color I should say that if I new I would have choosen a different color.
The grey AMEO housing is far from being "time resistant"...
Since few weeks the "video camera" around the front cam as disappeared and the "Alert" will soon do the same.
I allways take good care of my stuf and I'am bit disapointed for a 1.000 bucks machine to see it !

hmeyer said:
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Click to expand...
Click to collapse
They are available on ebay, if you search athena case you should find them. any problems then let me know. There is a guy who does spares on there and he has them in black or Silver.
regards
Jay

Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay

responderman said:
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
Click to expand...
Click to collapse
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.

tootallk2000 said:
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
Click to expand...
Click to collapse
Forgive my ignorance, What is the difference?
Jay

responderman said:
Forgive my ignorance, What is the difference?
Jay
Click to expand...
Click to collapse
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.

I need a new housing too.
Anychance you could PM me a link or contact for this.
Thanks in advance.

tootallk2000 said:
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
Click to expand...
Click to collapse
7501 does have 2 cams. the 7510 doesnt

goodluckje said:
7501 does have 2 cams. the 7510 doesnt
Click to expand...
Click to collapse
LMAO dude have you been drinking? The 7501 has 1 camera and the 7500 and the 7510 has 2. I own the 7501 which is also cheaper than the 7500. I suggest you google them and you'll see the difference.

tootallk is correct. 7501 has 1.

back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.

wgary said:
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
Click to expand...
Click to collapse
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad

madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
oops my bad.

madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
Here you go,
http://search.stores.ebay.co.uk/sk-...shopQQfsooZ1QQfsopZ1QQsaselZ239115870QQsofpZ0
Not cheap though!
Jay
P.S if im in trouble "Madbird" made me do it

HTC Dot View Case

Guys im from the Netherlands and I can't vind this case anywere why?!!!?!
I want to have the case before my phone comes so I won't damage it that fast I know how I im.. ghehe

Rolando88 said:
Guys im from the Netherlands and I can't vind this case anywere why?!!!?!
I want to have the case before my phone comes so I won't damage it that fast I know how I im.. ghehe
Click to expand...
Click to collapse
I dont believe Sprint is selling it yet.
Go to Verizon.com thats where I ordered mine from.
It doesnt have a Verizon logo on it anywhere and works fine.

jayjam99 said:
I dont believe Sprint is selling it yet.
Go to Verizon.com thats where I ordered mine from.
It doesnt have a Verizon logo on it anywhere and works fine.
Click to expand...
Click to collapse
woo! thank you! bene looking all over for this, spend 5 more bucks on some cleaning wipes in order to get the free overnight shipping over 49.00 as the case is only 44.99..

penskyc said:
woo! thank you! bene looking all over for this, spend 5 more bucks on some cleaning wipes in order to get the free overnight shipping over 49.00 as the case is only 44.99..
Click to expand...
Click to collapse
im trying to get rid of mine if you want...

rahtrip said:
im trying to get rid of mine if you want...
Click to expand...
Click to collapse
How much to ship it to the UK?

johnboywilson said:
How much to ship it to the UK?
Click to expand...
Click to collapse
lemme see

rahtrip said:
lemme see
Click to expand...
Click to collapse
Thank You

rahtrip said:
im trying to get rid of mine if you want...
Click to expand...
Click to collapse
If you flip over the cover, does it work to support the phone as a kickstand in landscape?
Sent from my HTC One_M8 using Tapatalk

GermanGuy said:
If you flip over the cover, does it work to support the phone as a kickstand in landscape?
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Nope. It just slips and falls over.

Have had the case now for over a day and I do have a few thoughts about it. Purchased at a Verizon store last Sat(none in my area had it in stock apparently) for $48 with tax and 3 day shipping to my home. Color was the grey which I thought went really well with my gunmetal model. Upon putting it on the phone I felt that the fit was spot on. The back snapped right into place and the front flip cover rests evenly on the screen. Functionality of the case is second to none. It works as advertised ranging from being able to see time and current weather conditions to making and answering calls.
Some of the other things that will light up are any incoming text messages and you can also dismiss any alarms that you have set to go off by simply following the gestures. A big question that I had when I bought the case was whether or not that the music playback would be hindered. I'm very happy to report that audio playback was just as clear and precise as if the cover wasn't over the front of the device. Another plus is when you open the cover the phone automatically unlocks and the screen shuts off when the cover goes back on. Thus greatly eliminating use of the top mounted power button.
I felt the choice of the materials for the case were not bad. The rear material certainly doesn't feel like a cheap plastic by any means, but it's nowhere near as nice as the phone's metal finish. The most comfortable way of using the phone for me was to hold the cover with my left hand and use my right to operate the phone itself. Now, I have rather large hands so this could obviously be different if you weren't blessed with such a thing. Folding the front of the case back over the rear proved to be uncomfortable to me. Another downside is the fact that the front cover cannot double as a kickstand when positioning the phone in landscape. When done so, the phone just falls flat on its back.
Overall, I definitely like the case. It has that wow factor to it as everyone I have showed it to have been amazed by it's functionality. The only things that HTC should improve on it is to have the front flap being able to fold back and stay flush on the rear of the device. I also would had like for the front flap to stay open when you open, but the trade off is that when it springs back into position it does a good job of staying over the screen, even in a loose pocket. I noticed no addition use of the screen during the day in Gsam battery monitor. If I were to give it a score out of 10 I'd place it at an 8. Only major cons would be price and certain aspects of holding the device depending on hand size.
I'd have to tip my hat to HTC for coming up with the concept. If anyone has anymore questions about it feel free to ask.

Found this on ebay:
http://www.ebay.de/itm/HTC-One-m8-dot-View-Hulle-Cover-Neu-/271443579895?pt=DE_Handy_PDA_Taschen_Schutzh%C3%BCllen&hash=item3f334c53f7

i ordered a dot view but my provider wrote me that they will deliver later in may

Rudimente said:
i ordered a dot view but my provider wrote me that they will deliver later in may
Click to expand...
Click to collapse
What is your provider? It looks like the black ones are available on Verizon.com again (they were sold out all week). Just ordered one for a friend.

Supacat said:
What is your provider? It looks like the black ones are available on Verizon.com again (they were sold out all week). Just ordered one for a friend.
Click to expand...
Click to collapse
german t-mobile is my provider

Rudimente said:
german t-mobile is my provider
Click to expand...
Click to collapse
I'm having german t-mobile as well, they told me today that the cases should arrive this week..? but don't know how true that is..
amazon started listing the colored variations today, but all of them are marked as "available for preorder"

any chance you could post a couple of pics showing what the case looks like when open and folded back? All the photos i've seen of it don't show this. want to know how much it bulks the phone out.
cheers

Managed to pick the one and only one of these up from my local Phones4U in Croydon today, then went to the other local Phones4U and bough the other one, looks like they are finally starting to trickle in.

Figured out how to get the case to function as a kickstand. It's simple, but involves needing something else like a laptop or book as a prop. Simply open the cover and fold it over the back of the device. Then just rest the device on the laptop or book of your choice. Then, boom it stays put in place and with the way I got it, the angle is pretty nice for viewing.

Ordering from Seidio? Get 10% off!

Hello,
Just thought I'd post this to help those out who are ordering a case from Seidio. I just ordered the Seidio Surface with Kickstand: http://www.seidioonline.com/htc-one-m8-surface-kickstand-case-black-p/csr3htm8k-bk.htm
Unfortunately, most of their cases for the M8 are still "Under development," but I need a case and a kickstand is not negotiable, need something to use as my alarm clock.
Use Promo Code: TW10 for 10% off your order on their site (I guess this is their Twitter Follower discount code.)

Here's a really good youtube of it. Looks great!

downwiththebanksters said:
I'd love to see you do a review or a few high quality pics. I looked at a video of the M7 case and the kickstand was a huge carbuncle on the back. On their site it looks smooth, but I'd rather see a real one in action.
Click to expand...
Click to collapse
Will do! I had a Seidio for my HTC One X and it was awesome despite the kickstand not allowing you to charge the device (I modified it, and flipped it around to allow this) But since the ports are different on the One M8 it shouldn't be a problem. Hopefully this case is just as reliable as the last one, which saved my phone a few times from unintended drops.

Thanks. What colour did you get?

downwiththebanksters said:
Thanks. What colour did you get?
Click to expand...
Click to collapse
NP! Black. I'm a pretty standard color kind of guy. :silly:

I just got the blue, and the colour is really nice. What the photos don't show is it has a pearlescent finish, and is a nice soft touch finish as well. The fit is great too as the above linked youtube shows. Yes it's relatively big money, but definitely a quality piece. My only knock is the kickstand does sit way off the phone like a carbuncle. They should find a way to better integrate it in the design.

P.S. how did you get s-off? Did you have to beg mama HTCDEV for permission to do what you wanted with your $700 device?

Has anyone got any of these generic dot view cases?

Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.

200
lsv-1 said:
Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
Click to expand...
Click to collapse
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out

ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter

ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
Guess what bro, those aren't genuine either even if they say so. If you look at the pics you'll notice that some don't have the htc logo
I have the genuine gray, I bought it when I've got the phone, but I'm curious about the quality of the ones they're selling for $8, that's it.
To be honest they look exactly the same but I would like a closer look. Sellers in Amazon claim that they're identical to the genuine with the exception of the logo.

Bierce22 said:
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
Click to expand...
Click to collapse
I always stay away from unbranded stuff, but these called my attention because they look identical and there are more colors available

Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app

Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using

I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.

henderjr said:
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
Click to expand...
Click to collapse
They are the same in quality! :good: That's what I thought.

bandjosh said:
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
Click to expand...
Click to collapse
Share the link or pics please!

GalaxyNotesTx said:
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Don't use one of these cases for protection period. I can almost state with certainty that if you drop your phone on any kind of solid surface, it will definitely come flying out of these cases. In fact, if you clumsily open the case to fast the device will come flying out sometimes. That is in the original from Verizon. They offer some screen protection while in pockets or bags, but little to no drop protection & even in bags, the top & bottom of the device is not protected from scratches.

It was a little more than I remembered but it's 13$ http://www.ebay.com/itm/221503424128?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The pictures are of mine.
Beyond that I agree with the post above mine, the dot view case is very functional as an accessory but as a protector it's useless it pops out so easily.
Sent from my HTC One_M8

I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.

I had the fake one with logo and the real deal case I got from a Verizon store. Felt the fake with the logo was just as good. So went to return the real deal case at Verizon. Turns out I mistakenly packaged the fake one and returned that one to Verizon(honest mistake). I had no idea until later when I took my One out of my csndyshell case and popped it in the dot view....So while I didn't mean to do that, I ended up with the real deal case. But honestly the fake one closed better than the real one. That is how close they are.

I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.

I had an authentic one, and then recently bought one of those non-authentic ones.
As a direct comparison, they both look the same, but the quality is different. particularly, the dots' translucent level is very uneven, so you'll get random brighter vs darker patches
on the authentic one, all dots have consistent translucency

OME or Knock-off, I wish that someone would come out with one that snaps on decently (even if it used double-sided tape) and maybe wrapped in leather. The plastic makes the phone feel so cheap! I had the original. I have since misplaced it since I got a cheap otterbox knock off for now. Does the job, but I do miss the DotView for the cool factor.

theandies said:
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
Click to expand...
Click to collapse
I have an OEM Dot View case and love it. I spent about $15 for it on Amazon. HTC also updated Dot View to add more functionality. And I was surprised yesterday by the Halloween animations. I'm very impressed by it and glad I got it.

SoI received my case today in the mail and here are my findings:
1. The case closes just as well as the OEM one I had.
2. The plastic case itself feels a bit thinner that the OEM one but I like that since I felt the OEM one was a bit too thick and added bulk to the phone.
The "Seams are not as smooth as the OEM but I am going to try and use a nail file and see if I can't fix that my self
4. The "Springiness" of the hinge that is in the OEM is not present in this case as it was in the OEM
5. The cover does not lay flat on the back of the case when opened all the way but I think that is just due to the design of the case.
6. The case seeme to snap onto the phone as well as the OEM case did.
To me, the $8.00 I spent on this case is totally worth it. As a matter of fact, I might order myself a second one to have different colors to chose from. If you think about it, for the price of one OEM you can get 6 of these in different colors and still have $2 and change left over!
I posted some pics of the case but it's hard to see any details.
Hope this helps you guys make a choice.
RonMac said:
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
Click to expand...
Click to collapse

[Q] Can you change the backs?

Hi All,
I'm considering the Moto X as a replacement for my Nexus 5. I'm kinda undecided about wood vs leather for the back - but I was wondering, can the backs be swapped out easily enough? I'd then be tempted to buy a wood one, and a leather back later on if I fancy a change. I believe this was fairly common practice with the old Moto X - but not seen it mentioned with regards to the new one.
Thanks.

No, you cannot, the back cover is sealed using an adhesive. Go for the wood one, the leather will get worn out soon.

Thanks very much. I would take the wood over leather anyway, since it's a bit different. Just need to work out which wood though.. I'm keen on 3 out of 4 of them! I've only seen bamboo in person (it was nice, but lighter than I thought). Had a lovely feel to it though. I'd love to see and feel the others before buying but I suspect it won't be possible.

tifosi256 said:
Thanks very much. I would take the wood over leather anyway, since it's a bit different. Just need to work out which wood though.. I'm keen on 3 out of 4 of them! I've only seen bamboo in person (it was nice, but lighter than I thought). Had a lovely feel to it though. I'd love to see and feel the others before buying but I suspect it won't be possible.
Click to expand...
Click to collapse
Try and watch some video reviews, read reviews on the web, high res pictures. These should help you decide by giving you a better idea. Use the thanks button instead of typing it out, much easier. Oh and , if your gonna put a case on it anyway, you could always buy the plastic back one and save some cash.

tifosi256 said:
Hi All,
I'm considering the Moto X as a replacement for my Nexus 5. I'm kinda undecided about wood vs leather for the back - but I was wondering, can the backs be swapped out easily enough? I'd then be tempted to buy a wood one, and a leather back later on if I fancy a change. I believe this was fairly common practice with the old Moto X - but not seen it mentioned with regards to the new one.
Thanks.
Click to expand...
Click to collapse
I saw a video where someone took of the back, it came of with some damage but I think a new one could be glued back on