I have ASUS ROG phone 3 Tencent edition with global ROM WW-31.0210.0210.230 and it has many problems
first suddenly 6 months ago it lost OTG support from two ports, can not read Flash drives or mouse and can not be connected to PC by usb only can be charged from two ports
I updated it to android 12 a month ago now suddenly it lost calling services can not receive or making calls and in the same time restart every 5 min.
I did a factory reset but still the same I could not copy a Firmware to internal storage but I downloaded WW-31.0210.0210.236 to downgrade to android 11 by resuming the download many times because it restart every 5 min. but when phone detect the firmware file failed to be installed
i can restart the phone to fastboot and download mode but pc can not detect phone also phone has no restart loop in this modes
Need Help
Same problem & until now can't find any solution to fix this issues ... please help us
Related
Hi guys!
I yesterday flashed my mi3 with miui 8 v6.7.21 it was flashed successfully and when I swiped for reboot it never started....:crying:
I pluged it to charger for like for like 3-4 hrs even the light was not blinking, after some time i connected phone to laptop to see if it could be flashed but i was suprised that my phone showed all the partitions of the phoneI accidently formatted all of them now I am unable to boot... as every thing is formatted is there any thing with which I can recover
Please help:crying:
Download MI flash tool and the latest miui 8 rom for MI 3
Boot your phone into fastboot mode by pressing volume down and power button together
Open Mi flash tool and connect your phone to computer
Browse to the rom package you downloaded
Select your device and click flash
Official guide from MIUI-http://en.miui.com/a-234.html
good morning
before few days my phone while on charge bricked with only red light. I read almost all threads about this phone but my problem is that windows not detected my device in order to install vcom drivers or sp flash it. I tried to connect in 3 different pc with no result. i tried also to connect with power pressed vol + Vol - with no results also i change my cable with new one but nothing.
phone is 6 months old and 2 monthes ago i installed this rom https://forum.xda-developers.com/le-2/development/x626-cuoco92-installed-multilingual-t3744201 with very good working except on during reboot a message orange state appears
any help is very appreciated
panos
Unlocking Tool gets stuck at either 50 or 99 %. "Can't unlock, Couldn't get info"
So, I've tried to unlock my phone for 2 months now without any success. I've done basically everything I could think of, but the same problem persists. The problem is that it gets stuck at either 50 or 99%; followed by a message that says: "Can't unlock, Couldn't get info" Also, I've made sure to wait at least 10 days after I've reconnected my account to retry but the unlock tool won't even show how long I have left.
What I've tried:
- Changing USB ports, Gen 2, 3 and 3.1.
- Using a USB HUB
- Reinstalling ADB drivers
- Resetting my PC
- Trying a different PC
- Reinstalling Qualcomm Fastboot drivers
- Different cable
- Resetted my MI account
- Deleted and created a new MI account
- Used another sim card and phone number
I'm quite desperate as unlocking it is somewhat important for me. As a poor student, I can't really afford to sell it and buy another phone to unlock either.
I'm not sure what's going wrong. I've unlocked many (well, 5) android phones in the past and never had any major issues like this.
Any tips and ideas would be appreciated.
I had this issue before , what I did to solve it is :
1)Use Intel system (AMD won't ever work) and enable usb debugging
2)Don't plug in your phone yet, open Mi Unlock and log in till You reach searching for phone step
3)Open Mi Unlock settings and click install driver
4)Make sure your phone is turned on normally and plug it in through USB 2
5)You will see message on pc telling u drivers are installed now check the phone to see (USB settings) click File Transfer ,now Mi tool should say plug your phone in boot loader mode
6)Turn off your phone and while it is turning off unplug the USB , now boot into fastboot and then plug ur phone in USB 3 port
This is tricky and buggy I got it first time and reached the message after 100% verifying but it said I still had to wait some time so when I tried to unlock it after the time passed I had to repeat these steps couple of times to work so be patient
The problem is mi tool needs both ADB and Fastboot drivers to be working but most of the time its only Fastboot driver due to the phone shutting down so its buggy as hell
https://prnt.sc/rbmvam
These are the drivers that should be both working so check them while repeating the steps if you got them both working you are good to go
The first time i tried to unlock my bootloader, unlock tool would be stuck at connecting to the device and couldn't see it.
No matter what i did it would never see it.
So i decided to try xiaomi tool v2 (not endorsed by Xiaomi). I also used a usb hub that i plugged to my laptop usb c and finally my device could be unlocked.
Did you buy the phone used or new?
Does it have a Global ROM, or it is a Global Version or CN?
I bought a used Pixel 4a 5G in February and immediately rooted with no issues. A few weeks ago, I took the March OTA update and lost root. Since then, I can connect the phone to a PC via USB cable, and the phone flashes to show it's charging, but no USB preferences notification and nothing shows up on the PC. I've tried 3 different PCs and many cables, including two new Google Pixel cables. I've tried cleaning out the port. I've even factory reset the phone but nothing changes.
So I have several questions, and I'm hoping one of the bright people in here can help.
Does anyone know what is going on and how to fix it?
Is there anyway to use wireless ADB without first establishing an USB connection?
Is there any way to flash a modified boot image without ADB/fastboot or root?
Is there any way to boot to the inactive slot without root or USB connection so I could use Magisk to flash to inactive slot instead.
same here. still looking for solution
snap, dont you dare ask Google either, they just shut threads down
after months of trying I have found a possible solution (worked for me)
In device manager goto reinstall drivers but do not opt for automatic or browse my pc for files but opt for the list option (browse then list) then choose Android & you will find MTP, first option didnt work but second MTP did for me, my PC can now see my phone.
Hi i got an ASUS ROG 3 I003DD ZS661KS - 6A017CN TENCENT edition bricked while updating any solution? I tried everything from computer but not opening at all, screen total black and no recovery mode starts,
Any help is appreciated
what is the device showing identified as under device manager when plugged in from the side port?
Nothing black screen, i tried up down button and power but nothing, few days ago recovery mode worked now nothing.. i tried to look some programm for force boot the phone through pc but all websites link are empty, I don’t know what to do.. i was updating the phone then this happened..
Get the device in EDL mode with working Qualcom drivers and a good connection to your pc. Then follow below guide, all needed looks to be there. You can get the device in EDL mode with a flash cable that you can buy cheap or make one yourself from a USB cable - there are guides online for doing that too.
[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021]
Unbrick your ASUS ROG Phone 3 for free!! Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself. I noticed some people in the community charging upto 50$ for the firmware which should've been free from...
forum.xda-developers.com
I connected the phone with EDL cable the computer recognize as Qualcom device etc.. but
i tried to flash the raw stock firmware trough pc and EDL cable but nothing says Sahara error mode while the process