I installed Lineage os 19.1 through lineage recovery on miui 13.0.1.0 SJOCNXM. I noticed that device isn't fast charging with the authentic fast charger. What should i do?
Related
Hi Mates !
I need your help please!
I was using eu 11 stable rom on my Mi 9, but when Xiaomi launched stock 11 global stable I tried to install stock rom via MiFlash tool in the end about 99% it shows error in tool and devices restarts normal but no touch screen works with external mouse by otg it works normal but without mouse nothing anything
If I installed MIUI 10. Miflash tool shows success flash but device reboots again & again.
When I install TWRP touch screen works perfectly and custom rom installs OK. but after reboot system it restarts.
I'm really very sorry for my bad english but I hope you"ll understand me.
Regards
I'm waiting my dears
Hello everybody,
Here is a list of all the steps I took over an hour on my Xiaomi Mi 9:
I unlocked the bootloader via Mi Unlock Tool (after waiting for countless hours).
I flashed the mauronofrio TWRP Recovery.
I installed the Paranoid Android Quartz ROM and tried it.
I installed the LineageOS ROM and tried it.
I tried putting back the Paranoid Android Quartz ROM.
After installing the aforementioned ROM via TWRP and restarting the device, the phone went into a loop where it turned on and off and the only thing that appeared on the screen was the Mi mark.
I then tried different solutions until I reached the most nefarious: I completely deleted the phone OS via TWRP and now the only thing I can access is the Fastboot. Obviously I can't access the OS, nor the mauronofrio TWRP, nor the Xiaomi Mi 9 default recovery mode.
How can I solve it? I know it's not your problem, but I'm quite upset (it's my only phone).
Thank you in advance!
UPDATE: As not said: I solved following this tutorial: www*dot*youtube*dot*com/watch?v=rJePUW8Xczw
In redmi 5 after android 10 rom flash viper4android not working ... If we install v4a in most cases device could not turn on after install drivers from magisk or recovery whatever... Device automatically goes to fastboot Everytime we turning on....
Problem is solved :-
Check link how to
Hi,
I've been experimenting with my P8 Lite yesterday and I wanted to share my findings with you.
Let's try to sort things properly so it easier to read:
Process:
I unlocked my bootloader some time ago using an online services for 5 € or so.
Returned the software to stock using eRecovery (volume up while booting).
Powered off the phone, holded the volume down button and connected the USB cable to computer to enter bootloader / fastboot mode.
Erased the system partition: fastboot erase system
Flashed the latest Android 10 phh-Treble ROM available in this board: fastboot flash system system-quack-whatever.img
Flashed the latest TWRP available on this board: fastboot flash recovery_ramdisk recovery-whatever.img
Disconnected the USB cable, holded the power button and volume up button until the phone restarted into TWRP.
Formatted data into ext4, then formatted it back to f2fs (from my experience, this fixes a lot of bootloops).
After booting, installed dilemma's overlay using the steps mentioned in his thread.
Results:
After 10-15 minutes of the Android logo, the system rebooted. It did the same again, so I decided it was not working.
Reformated data as in step 8 above to no avail.
Additional tests:
Used the same process above, but with Android 9 phh-treble image.
This time, it booted properly.
What's not working: Bluetooth LE, GPS
What's working: WIFI, Cell Data, calls, battery stats (and other things I cannot recall, just ask if curious).
Not tested: Everything else.
I thought Dilemma's overlay could fix the GPS and Bluetooth LE issues, but it didn't.
Anyone got those things running on any GSI / Treble rom?
Thanks in advance.
got a similar problem, after unlocking bootloader and installing twrp, did the same steps. tried lineageos 17 and aosp 10 gsi, same result, stuck on bootup logo and it won't go over. maybe it doesn't support android 10? have you successfully tested android 9 gsi?
Try LOS 15 GSI on Figo board firmware , it's smooth as hell!
I installed LineageOS 17.1 (12-22, 12-15, 12-08 with respective recoveries, all of which have the same results) on my brand new Moto G7 Plus and LineagOS gets to the setup screen and then a message says “Powering off, Shutting down….” and the phone reboots. LineageOS Recovery then loads and gives the “try again option” or “Factory data reset”. If I try again it boots to LineageOS setup screen then Powers off and reboots. If I Perform Factory data reset and format data it Powers off and reboots after the setup screen is shown. This continually happens. But If I keep my phone plugged into my laptop through the USB cable, it does not power off and reboot. But as soon as I unplug the USB cable the phone Powers off and reboots. The battery is at 100%. Anyone know why this is happening? Thanks for your help!
I purchased this phone directly from Motorola and it is not a T-Mobile phone. I successfully unlocked the bootloader at the Motorola website.
Phone original data before LineageOS install:
Model: Motorola Moto G7 Plus XT1965-T
Hardware version: pvt
Android Version: 10
Android security patch level: August 1, 2020
Kernel version: 4.4.192-perf+
#11 Tue Sep 29 19–13 CDT2020
Build number QW30.61-21-18-4
Software Channel: retla
freedomer said:
I installed LineageOS 17.1 (12-22, 12-15, 12-08 with respective recoveries, all of which have the same results) on my brand new Moto G7 Plus and LineagOS gets to the setup screen and then a message says “Powering off, Shutting down….” and the phone reboots. LineageOS Recovery then loads and gives the “try again option” or “Factory data reset”. ...
Click to expand...
Click to collapse
Confirmed with the same issue here as well. I had started out with the 12-22 and then the 12-01 with the EXACT same result. I ended up falling back to the 11-24 image (as suggested in another thread) which allowed the phone to boot, acquire cellular service and work as expected. Something got borked in the later builds that's causing things to be broken for fresh loads. (I've yet to work up the courage to try the OTA)
I got this the other day after flashing the 2020-12-05 build of LOS for microG, but then after reflashing it later the problem went away.
When it comes to modifications I've found this device to be the most temperamental of every phone I've had. Something works the first time, then it doesn't the next time I try it. It's pretty weird.
Thanks! Installing 11-24 fixed the issue.
11-24 build changes the Device Name to REVVLRY+ and this seems to fix all upgrading to versions after 11-24. Device Name, when received from the manufacturer Mototola, was "Moto G7 Plus".
I also decided to test a few different install scenarios while my phone is brand new and has no personal data on it.
1 – Installed 11-23 > Performed LineageOS Updater to 12-01 > Success!
2 – Currently at version 12-01 > Performed LineageOS Updater to 12-08 > Success!
3 – Currently at version 12-08 > Performed LineageOS Updater to 12-15 > Success!
4 – Currently at version 12-15 > Performed LineageOS Updater to 12-22 > Success!
Then I decided to perform a jump from 11-24 and then LineageOS Updater to 12-22 and this was successful as well. I also performed these install/upgrade scenarios through fastboot/adb sideload and all these upgrades were successful as well.
Same USB unplug boot loop is an issue on the latest /e os as well.