Whenever the device boots it gives me a security warning and press power button to continue message. Because of it I cannot reboot into recovery because even when I hold vol up and power the screen comes up and i need to let go of vol up for it to register at which point phone boots into system.
Well, the keys need to be pressed before the phone boots up and I think you also need to be connected to a PC, otherwise it won't work. If you're able to boot into system then adb reboot recovery should also do the trick
I usually do use the adb method. But I would like to use a method that is more reliable. My problem is that intermediate screen that appears before the samsing s20 fe screen that warns the bootloader is unlocked and device is unsafe and requires power button to be pressed by itself. It does not register when I have vol up pressed down. And when I release to press power and no matter how quickly i go back to pressing vol up + power the phone starts booting into system.
KHSH01 said:
I usually do use the adb method. But I would like to use a method that is more reliable. My problem is that intermediate screen that appears before the samsing s20 fe screen that warns the bootloader is unlocked and device is unsafe and requires power button to be pressed by itself. It does not register when I have vol up pressed down. And when I release to press power and no matter how quickly i go back to pressing vol up + power the phone starts booting into system.
Click to expand...
Click to collapse
The phone decides its boot method as soon as the screen turns on, that's why I said you need to have the buttons pressed and connected to the PC way before it even turns on.
Once it turns on and you get to that warning screen you can let go and just press the power button to continue and you don't even have to hold the buttons anymore.
Just do what I tell you and you'll be good
I think holding the buttons after pressing the power button to continue will make it boot to system I think, but I'm not sure lol
Can you get to fastboot? Is this an A/B device?
You can write to the misc partition to tell it to go to recovery.
ShaDisNX255 said:
The phone decides its boot method as soon as the screen turns on, that's why I said you need to have the buttons pressed and connected to the PC way before it even turns on.
Once it turns on and you get to that warning screen you can let go and just press the power button to continue and you don't even have to hold the buttons anymore.
Just do what I tell you and you'll be good
I think holding the buttons after pressing the power button to continue will make it boot to system I think, but I'm not sure lol
Click to expand...
Click to collapse
Ah. I will try that once I start modding the phone again.
KHSH01 said:
Whenever the device boots it gives me a security warning and press power button to continue message. Because of it I cannot reboot into recovery because even when I hold vol up and power the screen comes up and i need to let go of vol up for it to register at which point phone boots into system.
Click to expand...
Click to collapse
Well i had the same problem, here is how i solved.
First, you need to have a USB-C cable connected to a PC, if not you can do everything right but it wont go to recovery (and i think not even on Download Mode).
Second, shutdown the phone, don't just reset.
Third, Volume up and Power (keep it holding
Once the security screen come, take off the power button and with the Volume up, quickly take off and press again.
It should go to recovery.
Side note:
hey @ShaDisNX255 , nice to see you here.
Related
Hi,
I just purchased screen locked phone (requires password to unlock). I thought hard reset will fix it but it does not do anything.
I hope volume UP and volume DOWN buttons simultaneosuly while phone if off then press Power button and release it while continuing holding VolUP and VolDown but nothing happens - phone stays on locked screen. Does this procedure works on locked phones?
Mmmm...
Make sure you're holding the buttons in firmly while you briefly press the power button. It doesn't matter that the device is password protected, all the data will be cleared and set to default ROM settings.
If the device just switches on, it means that one or both of the volume buttons weren't completely pressed when you hit the power button
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
artisticcheese said:
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
Click to expand...
Click to collapse
can u get it into bootloader mode?
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
artisticcheese said:
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
Click to expand...
Click to collapse
hold volume button down and press power button. if you can do this just flash a new rom from the sd card.
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
artisticcheese said:
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
Click to expand...
Click to collapse
its starts booting windows mobile? or tri color screen?
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
artisticcheese said:
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
Click to expand...
Click to collapse
well damn...... ill try to help u out, ill do some looking around and get back to u.
Hard reset
Be sure first that device (not the screen) is turned off, then:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
Thanks,
I figured this out. I was so stupud, I understood phone is off is like screen is Off. It actually meant the whole phone is off instead (had to remove battery for that).
The First thing you need to do: Power-OFF your device.
since it's locked, software interaction may not possible. you need to take the battery out, and put it back in 2-3 seconds later
Then, hold VOLUP and VOLDOWN tightly, and hit the power button to start the hard reset procedure.
htc inspire
hello friends I have the same problem do you fixt your phone? if yes please let me know how you did it please
Thanks I solved my problem..
Hard reset
I have samsung galaxy fit. and forgot the password nothing happen even reboot the phone. does any one help me
So.... Been playing with this for the last two days trying to root this phone.
I've rooted a few other phones, so I do have experience with the overall process, but I am unable to even boot this phone into Recovery. I have tried booting into recovery by holding down both volume buttons + power and from adb terminal "adb reboot recovery."
Neither method works. The phone will boot (or reboot from adb) and brings up the "at&t World Phone" screen and then nothing else appears. The first time I tried this it actually wouldn't boot up even after pulling the battery and trying to start normally, it still sat at the same screen. I let it sit all day today at the screen until the battery died. I was finally able to get it to boot up earlier.
If anyone can help, that'd be greatly appreciated. Let me know what info I need to add.
I usually just press and hold both volume buttons and power then release just the power button and keeping the volume buttons still pushed on the 2nd time the white at&t screen pops up... Works for me every time.
Sent from my SAMSUNG-SGH-I897 using XDA App
hold volume up+down and power key btw this is wrong section to post supposed to be in general
Oh sorry, didn't realize it was supposed to be posted in general.
I've tried the Volume Up/Down + Power and this does not work, as I stated originally.
I've also tried to do it from the adb shell, which also does not work.
Does anyone have any idea why I can't access recovery?
I"m having a similar issue. Holding volume up+down and power and releasing in any combination just boots the phone up. If I just hold volume up+down and power the phone alternates between the AT&T World Phone screen endless.
Yes u have to let go of the pwr button when the phone screen turns on
Sent from my SAMSUNG-SGH-I897 using XDA App
I've tried just about every combination of the Volume Up/Down + Power and no luck.
I've also tried the following ADB commands, with no luck, it just reboots the phone:
adb reboot recovery
adb reboot-boatloader
When I hold Volume Down + Power I get the a Yellow Triangle with a Android guy with a shove with the text "Downloading... Do not turn off Target!!!"
When I hold Volume Up + Power I get an Android guy with the following text: "POWER RESET or UNKNOWN UPLOAD MODE"
For kicks, I tried to to flash a rooted update.zip via the Volume Down + Power way with the Samsung update software, the same way I have done with the Samsung Moment. Wasn't sure if it'd work, but worth a try.
Any one else have any ideas or suggestions?
Phishie, do you have a final release version? Or anything special about the phone you have?
I just press the two volume buttons first (to make sure theyre pressed before you hit power), then press the power button, as soon as the screen turns on, I let go of everything and it works just fine, no need to have ridiculously complicated instructions.
The trick is to make sure both volume buttons are pressed BEFORE you hit power. Then release. Easy as pie
Also, if you guys are having too much trouble, just download the one click root/unroot. It will run, boot your phone into recovery, then all you have to do is scroll to install packages with volume key and hit power. Done.
Trust me, I am making sure I'm pretty the keys completely. I've literally tried it fifty times by now.
And I've also tried the One Click Root. This does not boot the phone into recovery either. It just sits at the AT&T World Phone screen forever and will actually get stuck here and will not boot up normal even by pulling the battery and powering it back up. It'll just get stuck at the for-mentioned screen. I have to connect it to adb and reboot it there to get it out of the loop it's stuck in.
that doesnt sound good. Maybe you need to try a factory reset? are you running stock rom and everything?
When I first got the phone I did a factory reset.
Yea, it's completely stock to my knowledge. But I have a different ROM than the final release version that everyone else has. This is a pre-production device.
same problem
I try all the combos as well, no luck, would the combos be different for 2e vs 3e recovery?
I try combo, it powers on, the same thing happens, the at-t comes up, goes for a second, then screen brightens, wait a bit and then the home row buttons light up, hangs there... doesnt matter which kernel or which rom I flash, same thing, adb and other stuff wont work as they need usb debugging enabled, which mine isn't.
Is there a way to mod the phone files and flash to enable usb debugging? Anyway to remap the buttons to 2 button vs 3 button?
Everyone post your methods for entering recovery please?
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
nexaddo said:
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
Click to expand...
Click to collapse
http://support.microsoft.com/kb/2749480 = Steps how to hard reset a WP8 Device
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
nexaddo said:
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
Click to expand...
Click to collapse
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Jackson5 said:
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Click to expand...
Click to collapse
I've tried that...it didn't work. I've also went to Samsung and apparently it made it worse. Initially my problem had a blue screen after booting but after I took it back from service the blue screen has disappeared and now the phone just powers down after the boot. THe guys at Samsung told me that the don't have the device number in their database and that the cannot do anything to it....so i'm hopping that some tool will pop-up and I'll be able to flash the device from home.
Also being an Engineering unit when I power the device based on your description it doesn't show me an exclamation mark it just goes dark and if i hook it up to the pc it shows as mass USB storage, and I can access the files on it. So there is something i'm missing for this device in particular.
Thanks anyway for your support.
Thank you again Jackson5...Really...Thank you, i've almost lost hope...after seeing your post and replying to it I said ....what the heck...lets try that again, and it worked...not with your steps exactly...I put the phone into a charger and it started to power up...Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume and the exclamation mark appeared. and from there, suffice to say that I have a phone, again. So Thanks again
AW: Ativ S Blue Screen After Boot
I'm glad to hear that your phone is running again...
Sent from my GT-I8750 using Board Express
Same problem, help...
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
aginor said:
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
Click to expand...
Click to collapse
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
nexaddo said:
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
Click to expand...
Click to collapse
Cheers, I'm stuck in here and i can't get further.
My machine is an T899 Engineering version
Hi there i have a HTC One Mini 2 and i have forgotten the swipe password (as in the pattern).
So i turn phone off and hold power and vol down continuously and all it does is boot up (really fast).
I tried power and vol up for download mode and that doesnt work either.
So downloaded ADB, running that through command prompt (admin) and it says that my device is unauthorised.
So.....i am assuming that the usb debugging is disabled on the device. As far as i know its not been rooted.
The volume up and down work fine so its not them that dont work.
So my question is, is there any way to completely wipe the device? If so can it be rooted and it work that way?
For the record, when i connect the phone to Laptop it shows up, i have downloaded the google usb drivers, also the latest htc drivers. I turned off Anti virus and Firewall too.
Thanks in advance.
Try this: When android is up and running, press and hold VOL UP + POWER untill you see message about phone rebooting in xx seconds. Just as the screen goes black, let go of both buttons and immediately hold POWER + VOL DOWN. It should reboot into Bootloader without any delay or vibration.
asestar said:
Try this: When android is up and running, press and hold VOL UP + POWER untill you see message about phone rebooting in xx seconds. Just as the screen goes black, let go of both buttons and immediately hold POWER + VOL DOWN. It should reboot into Bootloader without any delay or vibration.
Click to expand...
Click to collapse
Thanks mate ill give that a try and get back to you later :good:
asestar said:
Try this: When android is up and running, press and hold VOL UP + POWER untill you see message about phone rebooting in xx seconds. Just as the screen goes black, let go of both buttons and immediately hold POWER + VOL DOWN. It should reboot into Bootloader without any delay or vibration.
Click to expand...
Click to collapse
LIFE SAVER. Worked perfect thanks
Glad I helped!
Hi my volume button down is broken and everytime it boots it's in safemode.
Whenever trying to access recovery it normally boots up when buttons are pressed.
Booting into download mode freezes it, I have to do a hard reboot by pressing all the buttons.
Volume/power button work fine when in use.
I've opened up my phone to disconnect my volume button it stills boots up in safemode.
I've tried 2 new roms still in safemode.
Hello brother,
Even you flash 2 new roms still booting up safe mode, bad seen
i feel your volume down button was keep pressed maybe,,,,,maybe (it should be b coz of dust or something else).
to be confirm is that your volume button broken or pressed follow the steps below
1. switch on your mobile release the power key and Press again the power key and wait till finish the boot, (if the device get restarted it means we can confirm your volume down button was pressed & hold)
2. press home button & power button check if the device is going to download mode ( if you stuck press power button u will get exit)
how ever try to clean the volume down button inside and pull slightly. after turn on your mobile.
if your damn sure volume button was broken not working at all, then lets think about it