Hello guys .
I faced with this problem 3 or 4 times
Xiaomi note 9 and POCO m3
not open with even a correct password , correct pattern , correct finger and not open with old password too
I thought this problem only is forgot password but unfortunately its is not
This Xiaomi problem is never fixed and there is no solution about it, except : Factory Reset
unfortunately
I think this problem come back to finger print and who disabled that setting they are good with no problem
I test some trick for saving data and did not work
1 - Reboot phone
2 - FASTBOOT
3 - Recovery mode
4 - turn off phone for 1 to 3 days
5 - try connecting to Pc with ADB and bypass lock section . without USB debug its not happening
And my correct password / pattern / finger don't work and phone locked up for 2 minute after 2 minute after and after etc.
Thanks for advanced to check this problem in android 10 and 11 on m3 and note 9
Edit : Guys i remember my password and know my pattern ok ? All I want from you is what to do to get into the phone with my own password / finger / pattern that I never forgot.
Best regard
Hope your suggestion will fix my issue without losing data
Hey again .. seems no one faced with this problem yet in XDA
I tested ADB again and after using ADB in FASTBOOT
with FASTBOOT command
that timer disappear .
anyway problem still stand and i cant open my phone with correct password.
and finger scanner don't care about finger and said wrong.
Can i flash a rom without losing data ? only replace gesture for bypasing lockscreen ?
I am facing same issue.. I'd upgrade the version last week... But today suddenly cannot use my correct password to unlock..
Is this thread resolved?
i dont think theres any solution for this...
mr.Emp said:
Hey again .. seems no one faced with this problem yet in XDA
I tested ADB again and after using ADB in FASTBOOT
with FASTBOOT command
that timer disappear .
anyway problem still stand and i cant open my phone with correct password.
and finger scanner don't care about finger and said wrong.
Can i flash a rom without losing data ? only replace gesture for bypasing lockscreen ?
Click to expand...
Click to collapse
btw how to reset the timer through fastboot command?
thanks
Related
How To Solve Find Device Storage Corrupted & Couldn't Add Fingerprint -Redmi Note 4X
Hello Everyone,
** I am writing my problem in details if that help you to diagnose my problem, and sorry if my English is not good enough..
I Purchased Redmi Note 4X around two weeks ago. Unfortunately, my device got stolen one week ago, and with the help of MI Cloud, I was able to get it back.
After getting back my phone, I found my device was flashed or reset and locked with MI cloud locker.
Then I flashed my device again with MI PC Suit and Disabled my device on MI cloud.
Since then, I found everything is working fine except following two problems.
Problem One: I am unable to add my fingerprint. Whenever I try to add one I receive following message: "couldn't add Fingerprint, try again." It should be noted here that when I try to add it, I feel 11 vibrations on my phone and see a progress of fingerprint add-on device. The message appears at 12 steps.
Problem Two: I am also getting Following Error message "find device storage corrupted your device is unsafe now error" whenever I try to locate my device through MI cloud > Find Device > Locate Device.
To Solve these problems, I tried following methods But Didn't Work for Me.
1. I made a Factory reset. (Hard & Soft)- Didn't work.
2. I updated Latest Stable Global Rom (System Update Method) - Didn't work.
3. I installed Latest Developer Global Rom ( First Boot Method) - Didn't work.
4. Cleared Wipe Cache Data, Wipe Reset in Xiaomi MIUI 8 through Mi recovery settings. - Didn't work.
** I am from Bangladesh. This device is officially not available here, So no hope for official warranty or support. You guys are my last hope. So please help me.
Any kind of help to resolve the problems will be highly appreciated.
Thanks and Regards
Bhai same problem help me too.. Plz
Install TWRP from this link, when it asking password, press CANCEL.
Then wipe DATA, that's your factory reset
I have same problem .... Would u get any solution ?? If yes then tell me ...plz
Bro Just Unlocked bootloader .
And Flash Twrp .
And Use any custom rom
Your fingerprint will work fine .
All sensor to......
as long as the bootloader is unlocked, those features are disabled and/or you get those error messages. Reason is that the fingerprint has to be saved somewhere. Unlocking the bootloader gives people access to that storage (after all, you can get root access). The device is "unsafe" because of the unlocked state. Go to settings -> additional settings and look if the developer settings are available. There you can check if your device is unlocked.
I have installed miui 9 custom room I my lava pixel V2 and after few days my phone start rebooting it self when download a gamer or other help need
I have the same problem not able to use wifi on my redmi 4x even i have tried fastboot rom flash but not working on custom rom its working fine i dont know why.
Hey guys,
last weekend my Huawai P9 battery got empty over the night and on the next morning after charging i noticed that the phone ask me for a password. Before i just used my finger sensor to get back into it but as you know after a complete restart it ask for the set password.
The problem is that i do not remember it in any way and right now i am @ 1 hour waiting time between the attempts.
I really don't want to delete and reset the phone and loose all my data. So i hope someone can help me to solve that problem to get back access to my phone without loosing all data.
Phone data:
Name: Huawai P9
Model: EVA-L09
Latest official available Android update installed.
No Root, No Modification
What i have tried so far:
1. Google Android Manager
I logged into my google account and tried to reset the password but google tells me it cant replace the password because its already active. So looks like that reset way only works for pin and gesture phones but not for ones that already have an active password.
2. dr.Phone
I have downloaded dr.phone toolkit for android and tried the unlock locked screen option but it tells me that the phone is not supported.
3. ADB / Fastboot
I installed ADB and fastboot on my system and tried to connect the phone to delete the password.key file. ADB is running on my windows but it does not get any connection to the phone because the phone has no developer option enabled and i am not able to enable it because it cant access it.
Fastboot does detect my phone but yea i cant delete a file with it right?
Greetings,
Chris
I would pay for a working solution so please help me to find a solution.
CGWeb said:
I would pay for a working solution so please help me to find a solution.
Click to expand...
Click to collapse
-I could only imagine that you are able to unlock your bootloader with DC Phoenix (normal bootloader unlock would cause data loss and u would need DC Phoenix for the oem lock)
-Maybe u are able to flash TWRP recovery with DC Phoenix and backup your files from there but i dont know if TWRP works without an unlocked bootloader.
-All in all DC Phoenix is a risky tool.
CGWeb said:
I would pay for a working solution so please help me to find a solution.
Click to expand...
Click to collapse
Stop stop stop.....
Is your phone under warranty? If it is, dont touch the bootloader or flash anything. Send it back to Huawei to fix it.
If its no longer under warranty, is it requesting a password to unlock your phone or is it the password for decrypt storage? And last question, do you use the finger print scanner to unlock your phone?
only solution with bootloader locked is the wipe data/factory reset inside erecovery
My p10 was just got back from warranty claim for broken screen. When i turn it on, there was this menu asking to recalibrate fingerprint sensor because the sensor was just replaced (not inputting new fingerprint). It was unclear how i should do it at first, however after few attempts it was supposedly asking me to rotate the phone while the finger resting on top of the sensor.
Too bad, i think my first few failed attempts may have miscalibrated the whole sensor.
Anyone knows how to get back into that menu?
Allesa said:
My p10 was just got back from warranty claim for broken screen. When i turn it on, there was this menu asking to recalibrate fingerprint sensor because the sensor was just replaced (not inputting new fingerprint). It was unclear how i should do it at first, however after few attempts it was supposedly asking me to rotate the phone while the finger resting on top of the sensor.
Too bad, i think my first few failed attempts may have miscalibrated the whole sensor.
Anyone knows how to get back into that menu?
Click to expand...
Click to collapse
Remove the fingerprint in Settings and add a new one.
Sent from my LON-L29 using XDA Labs
Mostar088 said:
Remove the fingerprint in Settings and add a new one.
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
that was the first thing i did.
well it is solved now. Solution is to re-flash full firmware. Factory reset wont do.
how did u reflashed it .. bcz I tried volume down+up+lock method but always it fails to updata
Allesa said:
that was the first thing i did.
well it is solved now. Solution is to re-flash full firmware. Factory reset wont do.
Click to expand...
Click to collapse
can u plz tell me how u reflashed it... bcz I have the same problem but my firmware always fails installing at 5%
kanishka1234 said:
can u plz tell me how u reflashed it... bcz I have the same problem but my firmware always fails installing at 5%
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page58
I replaced a broken display on a P10 VTR-L29 and the fingerprint button is not working, everything else is. At first I though the display is faulty, but now I have doubts since the fingerprint option on the menu is just not there. I re-flashed the same version of the firmware (B369) via TWRP and the problem persists. I may have to try a factory reset.
sky|ined said:
I replaced a broken display on a P10 VTR-L29 and the fingerprint button is not working, everything else is. At first I though the display is faulty, but now I have doubts since the fingerprint option on the menu is just not there. I re-flashed the same version of the firmware (B369) via TWRP and the problem persists. I may have to try a factory reset.
Click to expand...
Click to collapse
Fingerprint is not accidentally paired with PCB like in iPhone?
is there any solution for now? cause i cant unlock the bootloader any more
StarSix01 said:
is there any solution for now? cause i cant unlock the bootloader any more
Click to expand...
Click to collapse
So this is how it ends when noobs messing with phones they don´t understand.
-You can unlock bootloader by paying some bucks to DC phoenix.
When you have no fgingerprint sensor options enabled it points that:
- the fingerprint sensor is broken
- the fingerprint sensor is not conected right
Hi alll
I had the same problem after replacing my screen.
I used Quick tuneup, and since the fingerprint sensor work correctly.
DallasCZ said:
So this is how it ends when noobs messing with phones they don´t understand.
-You can unlock bootloader by paying some bucks to DC phoenix.
When you have no fgingerprint sensor options enabled it points that:
- the fingerprint sensor is broken
- the fingerprint sensor is not conected right
Click to expand...
Click to collapse
Who are You to call me a noob??
Ive got the phone from a friend and just asked for help.
Did i say, that there is no Option for fingerprint? NO there is one
StarSix01 said:
Who are You to call me a noob?
Ive got the phone from a friend and just asked for help.
Did i say, that there is no Option for fingerprint? NO there is one
Click to expand...
Click to collapse
Sorry bro, my fault, i thought you are the one who asked before you.
You didnt say anything about your problem just asked if there is a solution and that you cannot unlock bootloader. With this info no one is able to help you. But anyway:
1. method:
-Remove existing fingerprints
-do a factory reset
-add a new fingerprint (when finger not scaned properly try to push a little bit harder on the sensor and rotate the finger)
-After the new fingeprint is scaned it should work well
2. method:
-after you recieve OTA notification (every month) go to settings/system updates/ there are three dots in upper right corner and select "get the whole latest package". This will download the whole firmware and perform a factory reset low level and this should work (if simple factry reset didnt work for you).
if this methods don´t work i will suggest you to go to phone service.
DallasCZ said:
Sorry bro, my fault, i thought you are the one who asked before you.
You didnt say anything about your problem just asked if there is a solution and that you cannot unlock bootloader. With this info no one is able to help you. But anyway:
1. method:
-Remove existing fingerprints
-do a factory reset
-add a new fingerprint (when finger not scaned properly try to push a little bit harder on the sensor and rotate the finger)
-After the new fingeprint is scaned it should work well
2. method:
-after you recieve OTA notification (every month) go to settings/system updates/ there are three dots in upper right corner and select "get the whole latest package". This will download the whole firmware and perform a factory reset low level and this should work (if simple factry reset didnt work for you).
if this methods don´t work i will suggest you to go to phone service.
Click to expand...
Click to collapse
No problem Bro
I managed to download a filmware package with the filmware Finder (somehow it worked) do i have to use the dload method now?
spoolerbloque said:
Hi alll
I had the same problem after replacing my screen.
I used Quick tuneup, and since the fingerprint sensor work correctly.
Click to expand...
Click to collapse
thank you very very much its work for me
Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
1. On the setup wizard (after factory wipe), connect to internet (wifi/data)
2. Select "Emergency call"
3. Call to any valid number (112 for example)
4. When the calls start swipe to the left on the dialing screen and you will see message and browser displayed (in my case the message method doesn't works).
5. Select browser.
6. Go to google.
7. Search for Package Disabler Pro 9.8
8. Download it and install it.
9. Open it and search for "Samsung account".
10. Click on Clear Data and then Disable.
11. Go back to google and search for QuickShortMaker
12. Install it and open it.
13. Search for "Setup Wizard", it will expand.
14. Select the one with ".setupwizards.SetupExitActivity"
15. Done! You can now use the phone and restart.
Ok after this you can go and check that there is no Samsung account displayed (Settings>Accounts), buuuuut, you can't add it . What I did was:
1. Go back to Package Disabler Pro and enabled "Samsung Account".
2. Then go to Settings>Back up and reset
3. Factory data reset
4. Asked for Samsung account and I inserted my real account.
5. Done, now I can sync with my account.
The oooooooonly issue that I can't figure out it's the way to remove the "Reactivation lock" from Settings>Lock screen and security>Find my mobile.
Well that's all hope it works for you guys.
If this doesn't work for you, you can check out unlockjunky, they will definitely be able to do it.
Good luck!!
xxspokiixx said:
Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
4. When the calls start swipe to the left on the dialing screen and you will see message and browser displayed (in my case the message method doesn't works).
Click to expand...
Click to collapse
when i'm calling i cannot swipe to the right. Is there anyother way to open the browser?
112
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks
xxspokiixx said:
Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
Click to expand...
Click to collapse
Mate, you are an absolute legend! I've been searching for 8hrs looking for a solution after hard resetting my phone and being unable to get past the Samsung Account lock afterwards (even though I had the right username & password!) About fifty useless/outdated YT videos & a few hundred websites/forums later - none of which were helpful, I finally stumbled across your post, despite it not showing up 8hrs ago when I came straight to XDA hoping to find a solution first.
I have an improved method for #2, 3 & 4 of your post and will add all relevant info soon (just need some kip now that the panic is over). I'll also expand a little on some details and include further options which worked in my particular case, but all n'all - you're an absolute legend mate and I'd be screwed & still panicking without your shared info. Huge thanks...
Nice meme dude ya got me
Nomak1835 said:
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks
Click to expand...
Click to collapse
AGREED!!!!!!!!! DO NOT DIAL 112!!!!!! It switches to 911... not a funny joke
Nomak1835 said:
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks
Click to expand...
Click to collapse
You have to dial an emergency number or this trick doesn't work. Its not practical for most folks but if you are worried about dialing an emergency number I'd recommend using a SIM out of a tablet that isn't phone number enabled.
its working for j7 prime bypass samsung account
Hi, First of all thanks for this thread. i made it to #8 but when i download the apk and i cant figure out how to install it to complete steps 9 and 10. Maybe i'm over looking something im not sure but i need help.
TIA
Beasy936 said:
Hi, First of all thanks for this thread. i made it to #8 but when i download the apk and i cant figure out how to install it to complete steps 9 and 10. Maybe i'm over looking something im not sure but i need help.
TIA
Click to expand...
Click to collapse
Look for Aptoide apk download it to sd card and search for package disabler in this app and install it or download and copy Pachkage disabler you your sd card and run via file explorer or download and run ES File manager as I did.
when i make the call my wifi gets turned off and wont come back on till i restart the phone. i managed to open the browser but the wifi is off so i cant do anything after that except cry.
stock 5.0
Did you get it figured out I got the edge 6 plus to work fine now it was one of the tougher ones and I've done a few on some newer models what are you stuck on?
I thought the Combination Firmware would reset the FRP lock by default after being installed.
first thank you for sharing ur experience and i want to add
that i done it step by step and it works nicely but still cant remove the reactivation
and here is how iv done it after i bypassed it using ur method
i flashed a lower modem file from stock rom N910VVRU2BOG5 which is 5.0.1
at this point my imei went off
so i went for full flash by N910VVRU2BPA1_N910VVZW2BPA1_N910VVRU2BPA1_HOME. which is 5.1.1 and did full hard reset
then i just signed in with the last Samsung account i used with ur method earlier and it passed so now i can easly remove reactivation mark , unlock and root then make it Arabic .
thx again
Did you ever post up the suggested steps to replace #'s 2-4 in the original post above? I'm not seeing them anyplace. This would be a big help. Thanks.
When I call I can't swipe to the right is there another way to open browers
I successfully used this to gain access to my phone but I believe that if I power cycle it I will be locked out again. Is there any way to remove or change the samsung account now that I am in? The options are greyed out in settings.
ADB and Root.
Hey, I have been working on these for a while keep finding new things each time I try to remove Reactivation Lock. However I was wondering if I show you guys how to enable ADB with RSA Key, and Root the device. Could someone show me how to remove the Reactivation Lock using root. I used other methods on older and newer models, but these S5's are the only ones giving me issues.
After weeks of going mad trying different solutions I've found online, here's what worked 100% for me just last night:
Login to Samsung Account on other device, select Password & Security, enter password then choose Devices. LOG-OUT of your S6 Edge if listed, confirm. Next change password - doesn't matter what, can even change it back afterwards.
Flash Lollipop (I used G925VVRU4BOK7)
Wipe Data/Cache
Boot fresh Stock firmware, enter/confirm network details, at Reactivation Lock prompt, enter user & updated password. Sign-in....
Settings -> Lock Screen & Security -> Find My Mobile. Unselect Reactivation Lock and enter password... voila!
Works for anybody else??
when i made the call the wifi turn of
Hi guys,
I lost my Xiami Redmi 4a password and I would like to know if I can reset it or recover my phone (I don't need data inside it).
I can't enable USB Debugging (it's disable) and if I turn on my phone with Volume Up key and try to recover, I get an image with mobile and cable. Can someone tell me a way to reset it or I need to trash it?
Thank you.
Lawen78 said:
Hi guys,
I lost my Xiami Redmi 4a password and I would like to know if I can reset it or recover my phone (I don't need data inside it).
I can't enable USB Debugging (it's disable) and if I turn on my phone with Volume Up key and try to recover, I get an image with mobile and cable. Can someone tell me a way to reset it or I need to trash it?
Thank you.
Click to expand...
Click to collapse
You will need the xiaomi account password, even if you flash a fresh new miui rom the phone will ask you the password of the account asociated to this device.
So if you can't remember the forum password and can't ask to xiaomi to get a new one, your phone is done, maybe if you show the buy ticket you've a posibility.