I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
This is why you have to be extra careful while flashing something.. hope you find a solution
kalebwinefield said:
I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Can you access fastboot mode? If so, you can try unlocking the bootloader again and installing the rom you want. If you haven't removed the mi account it will unlock and you don't even have to wait the required time again.
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
kalebwinefield said:
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
Click to expand...
Click to collapse
Download the latest fastboot firmware (MIUI 11) for your mi cc9 (not mi 9 lite). Don't grab the recovery.zip firmware, it's useless and will give you errors.
When you finish your download, unpack your .tar firmware twice and flash it with MiFlashTool while you are on fastboot mode. (Power/Vol-).
Next time, ask before flashing not after !
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
stinkyllamaXDA1 said:
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
Click to expand...
Click to collapse
What kind of firmware are you trying to flash trough MiFlash ? recovery.zip or fastboot ? Can you take screenshots so people can know what is your issue ? Without screenshot no one will help you here !
Cheers
I also same situation, does anyone know a good idea?
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
irum94 said:
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
Click to expand...
Click to collapse
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write ?
Stefke93 said:
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write
Click to expand...
Click to collapse
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
irum94 said:
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
Click to expand...
Click to collapse
No until someone patch firehose for sdm710 ?
Mi 9 lite
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
This guy helped me. He uses ultraviewer.net for remote connection. 1722 rubles for flashing.
MOD EDIT: Phone Number Removed
Le: how did you bricked it? I restored an older backup of android 9 over Android 10 from twrp. But from what I understand cc9 doesn't have rollback protection.
Le2: you can also try those fishy 710 firehose no Auth loaders you can find from various sources. Didn't worked for me but you can try.
If you flash Revolution OS or flash Android 9 over Android 10 rom you have good chance to hard brick device so you need to flash first fastboot rom if you want to go from 10 to 9
Thanks
friend @editheraven thank you very much for the contact, I spoke and yesterday I could flash my MI 9 lite I really appreciate it, thank you bro.
loc182 said:
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
Click to expand...
Click to collapse
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
chainorth said:
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
Click to expand...
Click to collapse
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
editheraven said:
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
Click to expand...
Click to collapse
it can't boot to fastboot or recovery mode.
chainorth said:
it can't boot to fastboot or recovery mode.
Click to expand...
Click to collapse
And no recovery? Only the splash screen?
editheraven said:
And no recovery? Only the splash screen?
Click to expand...
Click to collapse
yes .Mi logo 2 sec then screen off
Hello,
I was running unlocked bootloader and pixelexperience rom. Today I wanted to try to flash latest xiaomi.eu and now my phone is bricked.
Steps:
Twrp -
flashed data (after that i saw that i had an error and data didn't flash)
installed rom (because i didn't see the error) - rom failed to install
flashed data again from twrp advanced option
phone rebooted and now it bootloops on mi logo. i do not have recovery nor fastboot.
what can I do in this situation? i searched the forum but there is nothing similar
You must have fastboot, check how install miui using mi flash. I use this method and working for me
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Andrei221 said:
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Click to expand...
Click to collapse
Exact same issue, no fastboot or EDL mode. Tried updating the latest Miui 11 - Android 10 - Xiaomi EU Rom (Jan 25th) and the phone has been bricked.
Solution Deleted.
got into EDL mode using test points, but now i have edl auth error - "cannot receive hello packet"
Seems like a common problem for bricked devices and need mi account with the right edl auth privileges.
Any help welcome.
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
DoYouWantFriesWithThat said:
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
Click to expand...
Click to collapse
you know hoe to bypass EDL authorization?
Leoleo96 said:
you know hoe to bypass EDL authorization?
Click to expand...
Click to collapse
No. I've tried different things:
- trying to flash with QPST in EDL mode (9008)
- trying to flash fastboot roms with various/ancient versions of MiFlash in EDL mode (9008)
- flashing standalone modem firmwares (old ones, new ones, non-ARB ones, packed with NON-HLOS, etc.) from TWRP
- doing a MITM on the response that MiFlash & MiFlash PRO get from https://update.miui.com/updates/miotaV3.php
- doing a MITM on MiFlash and redirecting requests to old URLs (https://update.miui.com/updates/miotaV2.php, https://update.miui.com/updates/miota.php) and black-box testing them
- using MobileEdit Forensic tool to exploit the EDL firmware
*Note*: I've obviously tried all the different FireHose programmers that are floating around (including those distributed by MobileEdit).
Nothing works.
Especially trying to modify the response (if one understood its format) could very well be useless because it could be that the response from update.miui.com is validated directly by the firmware itself (like a challenge-response authentication) - this has to be verified.
The only possibility I see for now is to flash the original Xiaomi Recovery, let it connect to MiFlash Pro (choosing option n.3 from the menu), and then using IdaPro to trick MiFlash Pro into telling the Recovery to flash the phone. It shouldn't be hard, and I think it *MIGHT* offer the possibility to bypass ARB & Authentication (but I might be wrong: it might be equivalent to flashing from Fastboot). That waits to be tested.
I hope this saves y'all from wasting time.
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
tarkusy said:
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
Click to expand...
Click to collapse
Any suggestion to un-brick mi8 and not mi8Lite?
I don't understand how to bypass EDL Account only coping a file on images folder
Hi! My xiaomi mi9 is blocked in Fastboot mode. I try flash with MIFLASH tool my device but when i do that it come out "CRCLIST ERROR". pls Help me!
hello I have a locked xiaomi mi 9 lite (xiaomi m1904f3bg / MI 9CC / pyxis)
I manage to activate the EDL mode and my windows recognizes it in Qualcomm on the COM port (03)
I am stuck at this stage, in this mode I cannot do anything, the adb or fastboot commands do not work the device cannot be found
Side mode Or fastboot mode its recognize on adb but , erreur lock state , thanks
how can I proceed,
thank you.
any mate help me plz ?
Thanks
Patmos77 said:
any mate help me plz ?
Thanks
Click to expand...
Click to collapse
What did you do to brick your phone?
Is your phone recognized as "Qualcomm HS-USB QDLoader" in Windows settings? Did you try to flash fastboot ROM with mi flash?
Hello sorry for the late reply but I had found the solution.
The phone was blocked mi account cloud it was impossible to flash it without the authorized account or an account certified by xiaomi,
I pay for software with it, I have access through their server to authentication at xiaomi (the only solution) ( edl mode Qualcomm usb ^)the flash was authorized at the start of the procedure, so it was impossible to do it with any other software (free) or the xiaomi official as authorization is required solve the problem in 20 minutes this way!
Thanks
My redmi 8 got stuck in bootloop, without me doing anything , it doesn't have debugging enable plus the bootloader is locked to and it doesn't have mi account login to it , I am not able to flash it nor to unlock the bootloader, can anyone please help me , what should I do?
only the service center can help. there are other wayabout methods but not every unofficial service counters can do them