Hello,
I am new to mess around with mobile phones and Android and (therefore) also managed to bring my girlfriend's GT-I8190 phone to a non-working state. Although there are lots of information in this forum I am more confused than sure what to do. I hope to get here some help / information / explanation.
Past
The phone was bought in Germany and had probably a German firmware. But I do not know, since no connections to Kies or whatsoever and no backups where done earlier. After a error of Android (e:\ failed to mount or something similar) which blocked the phone on the startup logo of the non-modyfied S3 mini, my guess for a quick solution was to flash the firmware with Odin to a new(er) German version. I downloaded (from a German forum) and flashed successfully several versions (supposedly OXA). But with all version the network connection hasn't practically worked. Only very weak and only at a few locations. Once I used in desperation also a so called stock-recovery from somewhere.
Present
I visited a shop where the uber-friendly Samsung service overwrote the firmware first with the general and later with the LaFleur version (PDA: XXAMG4, CSC: QXXA MH1). Kies tells me the CSC is somehow a VE1 version (what country is that code for - moon?). But the problem hasn't changed.
I still have the original IMEI, but I'm missing the baseband and, what worries me more: no product code. I managed to read it out only with "CheckFus" which says only: Not Active1
Future ?
Since I probably haven't used the right firmware at least once, I am hesitating to do more. My ideas are as following: modem, firmware, baseband.
What is the best way to proceed? Is there still a easy solution? I don't mind to change to another version - no stock firmware is required. Am I close to have a 4" tablet?
Any answer is appreciated - thanks!
bohlero said:
Hello,
I am new to mess around with mobile phones and Android and (therefore) also managed to bring my girlfriend's GT-I8190 phone to a non-working state. Although there are lots of information in this forum I am more confused than sure what to do. I hope to get here some help / information / explanation.
Past
The phone was bought in Germany and had probably a German firmware. But I do not know, since no connections to Kies or whatsoever and no backups where done earlier. After a error of Android (e:\ failed to mount or something similar) which blocked the phone on the startup logo of the non-modyfied S3 mini, my guess for a quick solution was to flash the firmware with Odin to a new(er) German version. I downloaded (from a German forum) and flashed successfully several versions (supposedly OXA). But with all version the network connection hasn't practically worked. Only very weak and only at a few locations. Once I used in desperation also a so called stock-recovery from somewhere.
Present
I visited a shop where the uber-friendly Samsung service overwrote the firmware first with the general and later with the LaFleur version (PDA: XXAMG4, CSC: QXXA MH1). Kies tells me the CSC is somehow a VE1 version (what country is that code for - moon?). But the problem hasn't changed.
I still have the original IMEI, but I'm missing the baseband and, what worries me more: no product code. I managed to read it out only with "CheckFus" which says only: Not Active1
Future ?
Since I probably haven't used the right firmware at least once, I am hesitating to do more. My ideas are as following: modem, firmware, baseband.
What is the best way to proceed? Is there still a easy solution? I don't mind to change to another version - no stock firmware is required. Am I close to have a 4" tablet?
Any answer is appreciated - thanks!
Click to expand...
Click to collapse
Try to flash this firmware : http://www.sammobile.com/firmwares/3/?download=18114 via odin3 it's a i8190XXAMG4 (DBT) firmware it also include modemfs (modem) then try to upgrade your baseband to XXAMG4.
bohlero said:
Hello,
I am new to mess around with mobile phones and Android and (therefore) also managed to bring my girlfriend's GT-I8190 phone to a non-working state. Although there are lots of information in this forum I am more confused than sure what to do. I hope to get here some help / information / explanation.
Past
The phone was bought in Germany and had probably a German firmware. But I do not know, since no connections to Kies or whatsoever and no backups where done earlier. After a error of Android (e:\ failed to mount or something similar) which blocked the phone on the startup logo of the non-modyfied S3 mini, my guess for a quick solution was to flash the firmware with Odin to a new(er) German version. I downloaded (from a German forum) and flashed successfully several versions (supposedly OXA). But with all version the network connection hasn't practically worked. Only very weak and only at a few locations. Once I used in desperation also a so called stock-recovery from somewhere.
Present
I visited a shop where the uber-friendly Samsung service overwrote the firmware first with the general and later with the LaFleur version (PDA: XXAMG4, CSC: QXXA MH1). Kies tells me the CSC is somehow a VE1 version (what country is that code for - moon?). But the problem hasn't changed.
I still have the original IMEI, but I'm missing the baseband and, what worries me more: no product code. I managed to read it out only with "CheckFus" which says only: Not Active1
Future ?
Since I probably haven't used the right firmware at least once, I am hesitating to do more. My ideas are as following: modem, firmware, baseband.
What is the best way to proceed? Is there still a easy solution? I don't mind to change to another version - no stock firmware is required. Am I close to have a 4" tablet?
Any answer is appreciated - thanks!
Click to expand...
Click to collapse
I8190XXAMG4 / QXXAMH1 is a German La Fleur firmware. I have no idea why your CSC seems to be messed up. It should probably be DBT.
What does it say if you dial *#1234# in dialer?
Thanks for the infos so far.
I did not intend to link to the LaFleur version in the first post.
Do I need the root recovery for the baseband update?
With the 1234 code I get:
AP: I8190 XXAMG4
CP: XXXX
CSC: I8190 QXXAMH1
I think this is the same as mentioned before. I checked the origin of the files I used before on this mobile and it is possible that I used this a recovery file which may be for a 8190N (I cannot post the outside link yet). I did not read careful enough the thread linking to this file.
Can this be the origin for the messed CSC version and the missing product code?
Looks like you're without baseband.
Take a look at this thread and flash a modem for i8190.
http://forum.xda-developers.com/showthread.php?t=2526831
Sent through time and space from my s3mini/CM11
Happy end
Hello again,
firstly: Problem is solved - phone works properly. Thanks for the replies and to tys0n for the work with the files and the support - acutally doing the job of Samsung and google.
For the sake of completeness, I will tell what I did, if any unexperienced user (as I still am) will ever come across this thread:
I tried first just the standard firmware AMG4 from Sammobile (which is linked above) and afterwards the baseband files - but both did not help as expected.
I installed CWM and used the file from here and miraculously it was working (The phone is used only in 2G). Later I wiped the data and flashed again with the AMG4 firmware to have a clean version now.
AP, CP, CSC say all XXAMG4 now, Kies recognizes it as DBT (as supposed to). But the product code, which came back and was read out with CheckFus, says I8490 RWA XSE. This should be Indonesia, correct? Is there still an inconsistency somewhere?
Thanks again for the help
Robert
Hi guys,
I know there are many similiar threads to this one and I'm sure I've read most of them. Either my issue is different, or, if the answer was in one of them, I was too stupid to realize it.
With my S4 Active GT-I9295 I had to go back to stock ROM for the Samsung S-Health and Gear related apps.
I came from spegelius' (absolutely awesome) Google Edition for SGS4A (int'l) v0.9.9.-od2 and flashed the Samsung Stock 4.4.2 with Odin (*). The procedure was: Flash -> Factory Reset -> Flash again to be absolutely sure all files are updated. Currently, I rooted the phone.
My problem persists:
After a reboot I (usually; not always) am able to make normal phone calls.
After some time (sometimes minutes, sometimes hours) I no longer have sound.
I do not hear ringing, the callee can't hear me, I can't hear the callee.
Same problem if I'm being called
Establishing a connection though works always.
Mobile Data is not affected.
WiFi works
Also observed after factory reset -> re-flash, only enter WiFi PW and Google Login Data -> try phone call
I know this problem often arises from a baseband/modem mismatch. So I investigated my CWM backup of the pre-installed 4.2.2 ROM.
That's what was pre-installed:
Bootloader: I9295XXUBMK3
CSC: I9295OXXBMK3
Modem: *I did not find the info in my backup*
This corresponds to the Romanian 4.2.2: http://www.sammobile.com/firmwares/download/22586/I9295XXUBMK3_I9295OXXBMK3_ROM.zip/
That's why I flashed the direct successor http://www.sammobile.com/firmwares/download/37083/I9295XXUCNI1_I9295OXXCNI1_ROM.zip/
PDA: I9295XXUCNI1
CSC: I9295OXXCNI1
MODEM: I9295XXUCNI1
I tried everything I could find online, nothing helped. I am really running out of ideas. Is it possible to go back to 4.2.2 to see if the problem persists?
I do have logcat logs of the radio module before and after the problem occured. But its thousands of lines. If it helps I can upload it!
Thank you guys for your help
(*): I did some intermediate flashing of several other firmware versions (especially different baseband / CSC versions of the same 4.4.2). But I assume this does not affect the result. I used Odin v3.07 & v3.09
Edit: PS: I still think that I might have the wrong CSC Version. I know the 4.2.2 PDA/CSC matches, but I am not from Romania. I'm actually from Germany. And what makes me wonder is that I cannot select the German Keyboard Style without downloading it first. I can't remember doing something similar after unboxing the phone and setting it up for the first time.
Are you aware of this thread?
http://forum.xda-developers.com/showthread.php?p=56955843
Bevare the Thanks Button
Thanks for the answer O-T!
Yes, I was aware of that thread. However, I never made it until here
http://forum.xda-developers.com/showthread.php?p=50787570
Although I did the things basically as described in that posts I have a new question:
Which country is relevant for the search on sammobile? I mean, do they ask me "Where do you live" or "For which country was your device produced?".
Edit: Okay actually they ask me for the 'product code', so it's probably the latter question.
I realized that my 4.2.2 PDA and CSC also match the French version. That would match the language of my original packaging. I already flashed the French 4.4.2 once but heard only noise when calling someone. So I gave up on that one quickly. But I'll give it another shot now.
Is it possible that I had a factory installation of the firmware for country A, and when I first registered with my local carrier I received a modem update OTA for country B?
That would really surprise me. But it could explain my issues, since there is no 4.4.2 for o2 Germany, i.e. I probably wouldn't receive another modem update OTA.
(I never looked into the carrier specific firmwares because I figured they are for sim-locked devices.)
If the above is true, I understand that the only option would be to somehow downgrade my device back to 4.2.2.
I know I'm asking a lot of questions that have been asked and answered elsewhere. But by now I tried so much and nothing worked that I'm really confused and need your guidance.
I know I type too much, so a short summary.
Everything I tried so far didn't help, the stock ROM from sammobile.com doesn't help, currently I'm on 4.4.2 XEF (France)
I'm 80% sure I have the firmware for the correct country
From factory-side I definitely had an XX PDA and OXX CSC, so shouldn't all XX/OXX versions work, even if not the exact country?
What should I try next?
Is there a way to uniquely identify the country code from a backup of the /system or /data parition?
hyperion89 said:
I know I type too much, so a short summary.
Everything I tried so far didn't help, the stock ROM from sammobile.com doesn't help, currently I'm on 4.4.2 XEF (France)
I'm 80% sure I have the firmware for the correct country
From factory-side I definitely had an XX PDA and OXX CSC, so shouldn't all XX/OXX versions work, even if not the exact country?
What should I try next?
Is there a way to uniquely identify the country code from a backup of the /system or /data parition?
Click to expand...
Click to collapse
I am not sure if you have done this, but one thing I always recommend is a phone factory reset from settings (not CWM/TWRP) when you are on stock firmware as this is known to correct a lot of issues caused mainly due to faulty partition / corruption. However beware of the fact that this will wipe your internal SD card therefore back it up before you do that.
If you have flashed the correct firmware for your country & carrier (if it has a separate one) where you are using the phone, and done the above then I do no see any other issue than a faulty IC that requires replacement
JASONRR said:
I am not sure if you have done this, but one thing I always recommend is a phone factory reset from settings (not CWM/TWRP) when you are on stock firmware as this is known to correct a lot of issues caused mainly due to faulty partition / corruption. However beware of the fact that this will wipe your internal SD card therefore back it up before you do that.
Click to expand...
Click to collapse
Yes, I always did a factory reset. Most of the times I even flashed the firmware a second time after the factory reset. (This was recommended somewhere else.)
JASONRR said:
If you have flashed the correct firmware for your country & carrier (if it has a separate one) where you are using the phone, and done the above then I do no see any other issue than a faulty IC that requires replacement
Click to expand...
Click to collapse
Now that really helps me! Thanks. BUT: There is a seperate firmware for my carrier. However, I did not purchase the phone from that carrier. That's why I never tested the carrier specific firmware. Moreover, there is only the old 4.2.2 available, so I can't test it, since I cannot downgrade.
hyperion89 said:
Now that really helps me! Thanks. BUT: There is a seperate firmware for my carrier. However, I did not purchase the phone from that carrier. That's why I never tested the carrier specific firmware. Moreover, there is only the old 4.2.2 available, so I can't test it, since I cannot downgrade.
Click to expand...
Click to collapse
You can flash only the modem & non-holos from the 4.2.2 firmware and check
JASONRR said:
You can flash only the modem & non-holos from the 4.2.2 firmware and check
Click to expand...
Click to collapse
Tried it and it didn't work; completely crashed my Phone Application. It rang on the other side, but no conversation was possible. Is this because of the bootloader / modem mismatch?
Does anyone have instructions to safely downgrade to 4.2.2 again? Should I open another thread for this discussion?
hyperion89 said:
Tried it and it didn't work; completely crashed my Phone Application. It rang on the other side, but no conversation was possible. Is this because of the bootloader / modem mismatch?
Does anyone have instructions to safely downgrade to 4.2.2 again? Should I open another thread for this discussion?
Click to expand...
Click to collapse
Identify the bootloader version and Knox state:
http://forum.xda-developers.com/showthread.php?p=57332718
Knox is not a counter - it's a like a fuse.
Hi O-T,
the bootloader is I9295XXUBMK3 and it does not yet have the warranty bit which I assume you mean by KNOX state.
Are there maybe any new ideas?
hyperion89 said:
Hi O-T,
the bootloader is I9295XXUBMK3 and it does not yet have the warranty bit which I assume you mean by KNOX state.
Are there maybe any new ideas?
Click to expand...
Click to collapse
There's 3 stock 4.2.2 TW ROM I9295XXUBMK3 to choose for flash by Odin. All have different Germany CSC (Carrier Specific Code) - Generic, O2, T-Mobile. PDA=MODEM=I9295XXUBMK3 for all of them. Not sure if O2 or T-Mobile versions are locked, but they usually have operators bloat apps.
Remember to power OFF before entering download mode, flash ROM in Odin, factory reset.
https://www.samdownloads.de/download/i9295xxubmk3-dbt-4-2-2-germany/
https://www.samdownloads.de/download/i9295xxubmk3-via-4-2-2-germany-o2/
https://www.samdownloads.de/download/i9295xxubmk3-dtm-4-2-2-germany-t-mobile/
Your choice.
O-T I'm so sorry. My post from yesterday was a lie; I can't read my own OP. :crying: :angel:
I9295XXUBMK3 was preinstalled
Now I'm on I9295XXUCNH2, which implies 4.4.2 and makes a downgrade to 4.2.2 impossible (afaik).
Please note that I already tried the generic German (4.4.2) firmware. I never had operater bloat apps and I bought a simlock-free version of the device. Thus I never tested the o2 / T-Mobile ones. (I did, however, once flash the o2 modem over the generic 4.4.2, which turned out to be a bad idea).
I would love to extract the modem info from my CWM backup. The bootloader / CSC strongly suggest I have a French phone, but the modem would ultimately clarify that.
What is your opinion on trying a different custom-ROM? I never built one so I have no idea from where designers obtain their NON-HLOS and modem files. I know many don't come with any of those and require an already working ROM before flashing so these drivers can be kept. On the other hand, Darkman's StockyROM has an additional modem pack.... which, in my case, didn't help.
I simply cannot believe that it's a hardware issue. Everything worked fine until the update to 4.4.2 and new radio drivers should be thoroughly tested before distribution.
I have two s10+ devices, one has received software updates a few days after the release, however, my other device does not receive software updates. When the device was purchased, it received one software update, I had to factory reset the device not too long after that. After factory resetting I haven't had any updates, I had to flash the April update via Odin, the other device has already received the May update, and this one even after searching says software is up to date. I've tried Samsung smart switch as well, and it says the same. Is there any way to fix this? Thanks for any assistance.
Gdefreitas said:
I have two s10+ devices, one has received software updates a few days after the release, however, my other device does not receive software updates. When the device was purchased, it received one software update, I had to factory reset the device not too long after that. After factory resetting I haven't had any updates, I had to flash the April update via Odin, the other device has already received the May update, and this one even after searching says software is up to date. I've tried Samsung smart switch as well, and it says the same. Is there any way to fix this? Thanks for any assistance.
Click to expand...
Click to collapse
I wonder if both of your devices are from the same region. You can go to Sammobile website and check the firmware info for your device that rarely gets updates. It will show the latest update available for that region/device
Charkatak said:
I wonder if both of your devices are from the same region. You can go to Sammobile website and check the firmware info for your device that rarely gets updates. It will show the latest update available for that region/device
Click to expand...
Click to collapse
Both are from the same region, I flashed the April update via Odin after downloading the firmware from Sammobile. I just would rather not have to flash updates all the time via Odin. It only received one update, and then nothing ever since. The only thing I did after receiving the one update is factory reset the device and eventually switching carriers. I'm wondering if that could be why, but the other device I purchased is on the same carrier, and it gets the updates very quickly, both are factory unlocked devices.
Gdefreitas said:
Both are from the same region, I flashed the April update via Odin after downloading the firmware from Sammobile. I just would rather not have to flash updates all the time via Odin. It only received one update, and then nothing ever since. The only thing I did after receiving the one update is factory reset the device and eventually switching carriers. I'm wondering if that could be why, but the other device I purchased is on the same carrier, and it gets the updates very quickly, both are factory unlocked devices.
Click to expand...
Click to collapse
Interesting. Haven't had that happen to me.
1) Which carrier are you using right now?
2) What is the model # of your phone and which CSC code, XAA or another one? - how can I locate your phone's firmware on Sammobile site?
Software
Charkatak said:
Interesting. Haven't had that happen to me.
1) Which carrier are you using right now?
2) What is the model # of your phone and which CSC code, XAA or another one? - how can I locate your phone's firmware on Sammobile site?
Click to expand...
Click to collapse
I'm currently on the Bmobile network as I'm from Trinidad. The device that gets updated, the Software service provider is listed as TPA/TTT, TPA/TPA. The device that doesn't get it is listed as TTT/TTT, TTT/TPA. Both are on the same network. I downloaded the April update from Sammobile, the one listed here: firmwares/galaxy-s10-plus/SM-G975F/EON/download/G975FXXU1ASD5/267193/
I hope I provided all you asked about, if you need anymore info to assist, let me know.
Gdefreitas said:
I'm currently on the Bmobile network as I'm from Trinidad. The device that gets updated, the Software service provider is listed as TPA/TTT, TPA/TPA. The device that doesn't get it is listed as TTT/TTT, TTT/TPA. Both are on the same network. I downloaded the April update from Sammobile, the one listed here: firmwares/galaxy-s10-plus/SM-G975F/EON/download/G975FXXU1ASD5/267193/
I hope I provided all you asked about, if you need anymore info to assist, let me know.
Click to expand...
Click to collapse
Use attached SamFirm tool to search and download what you need and in your case it is either EON or TPA. You can start from flashing EON firmware and see if it will help you get updates or from TPA, your choice.
1) I would advice you to remove sim card from your phone
2) Use backup/restore in your phone's settings(if you need it) to back up your phone. Then do "reset" option in your phone settings to wipe it
3) After phone comes to "welcome screen", turn it off and put it in download mode for Odin and put 4 files where they belong and the rest you know...I personally use CSC files instead of HOME_CSC as I like to wipe the whole phone(you can try home_csc first if you so desire)
I also included the screenshot with your model and CSC code in it. Just check for update in the tool and you can change the EON to TPA if you need another firmware.
If you could take a screenshot of your software info screen, where it shows TTT/TTT/.... stuff and also after you click check for update on your phone, I wonder how the screen looks like where it tells you "software up to date"
Charkatak said:
Use attached SamFirm tool to search and download what you need and in your case it is either EON or TPA. You can start from flashing EON firmware and see if it will help you get updates or from TPA, your choice.
1) I would advice you to remove sim card from your phone
2) Use backup/restore in your phone's settings(if you need it) to back up your phone. Then do "reset" option in your phone settings to wipe it
3) After phone comes to "welcome screen", turn it off and put it in download mode for Odin and put 4 files where they belong and the rest you know...I personally use CSC files instead of HOME_CSC as I like to wipe the whole phone(you can try home_csc first if you so desire)
I also included the screenshot with your model and CSC code in it. Just check for update in the tool and you can change the EON to TPA if you need another firmware.
If you could take a screenshot of your software info screen, where it shows TTT/TTT/.... stuff and also after you click check for update on your phone, I wonder how the screen looks like where it tells you "software up to date"
Click to expand...
Click to collapse
I'll try using the Samfirm tool and do as you said. After flashing ,will I be able to receive OTA updates? These are the screenshots of the present software info on both devices. The night mode is the device that doesn't update, the other the one that does.
Charkatak said:
Use attached SamFirm tool to search and download what you need and in your case it is either EON or TPA. You can start from flashing EON firmware and see if it will help you get updates or from TPA, your choice.
1) I would advice you to remove sim card from your phone
2) Use backup/restore in your phone's settings(if you need it) to back up your phone. Then do "reset" option in your phone settings to wipe it
3) After phone comes to "welcome screen", turn it off and put it in download mode for Odin and put 4 files where they belong and the rest you know...I personally use CSC files instead of HOME_CSC as I like to wipe the whole phone(you can try home_csc first if you so desire)
I also included the screenshot with your model and CSC code in it. Just check for update in the tool and you can change the EON to TPA if you need another firmware.
If you could take a screenshot of your software info screen, where it shows TTT/TTT/.... stuff and also after you click check for update on your phone, I wonder how the screen looks like where it tells you "software up to date"
Click to expand...
Click to collapse
I'll try using the Samfirm tool and do as you said. After flashing ,will I be able to receive OTA updates? These are the screenshots of the present software info on both devices. The night mode is the device that doesn't update, the other is the one that does.
Gdefreitas said:
I'll try using the Samfirm tool and do as you said. After flashing ,will I be able to receive OTA updates? These are the screenshots of the present software info on both devices. The night mode is the device that doesn't update, the other the one that does.
Click to expand...
Click to collapse
I see that on the night mode device, the firmware is TTT and on the other is TPA. I think the TTT doesn't get the update, so use the tool and download TPA and flash your phone. If everything is good, I believe you should be receiving updates.
Charkatak said:
I see that on the night mode device, the firmware is TTT and on the other is TPA. I think the TTT doesn't get the update, so use the tool and download TPA and flash your phone. If everything is good, I believe you should be receiving updates.
Click to expand...
Click to collapse
So instead of searching for EON, search for TPA in the samfirm tool and use that to install? Also, I've never used this particular program, is there a guide to using it to make sure I don't mess up the process?
Gdefreitas said:
So instead of searching for EON, search for TPA in the samfirm tool and use that to install? Also, I've never used this particular program, is there a guide to using it to make sure I don't mess up the process?
Click to expand...
Click to collapse
Correct, search for TPA instead of EON firmware and once the firmware is found, click download and the rest is the same. After that you would just unzip files to the folder and use Odin. Don't forget about the steps I provided before flashing
Charkatak said:
Correct, search for TPA instead of EON firmware and once the firmware is found, click download and the rest is the same. After that you would just unzip files to the folder and use Odin. Don't forget about the steps I provided before flashing
Click to expand...
Click to collapse
That would be factory resetting the device, then once it boots on to the welcome screen boot into download mode and then do the flash? Thanks for all the help, I'll try it out and see how it works whether it switches to the correct thing.
Gdefreitas said:
That would be factory resetting the device, then once it boots on to the welcome screen boot into download mode and then do the flash? Thanks for all the help, I'll try it out and see how it works whether it switches to the correct thing.
Click to expand...
Click to collapse
Remove the sim, factory reset the device. After that it will restart and boot to welcome screen. Put phone into download mode, start Odin, connect your phone, add files, flash firmware. After your phone restarts, it should be at the welcome screen. Now put your sim and see if you get any message that tells you something about "carrier settings..." which is good, then it will restart
Charkatak said:
Remove the sim, factory reset the device. After that it will restart and boot to welcome screen. Put phone into download mode, start Odin, connect your phone, add files, flash firmware. After your phone restarts, it should be at the welcome screen. Now put your sim and see if you get any message that tells you something about "carrier settings..." which is good, then it will restart
Click to expand...
Click to collapse
So I downloaded the TPA firmware and flashed it, I also followed your instructions with regards removing the sim. When I reinserted the sim, no carrier settings showed up, and the software version still shows TTT, so I'm guessing the lack of software updates will continue.
Gdefreitas said:
So I downloaded the TPA firmware and flashed it, I also followed your instructions with regards removing the sim. When I reinserted the sim, no carrier settings showed up, and the software version still shows TTT, so I'm guessing the lack of software updates will continue.
Click to expand...
Click to collapse
I just saw the image. Flash again. For my phone, I had to flash 3 or 4 times before it changed the SW version. I used 3 different Odin versions as well.
Use Odin version that I attached here too. You need to flash and make sure the SAOMC_SM-G975F_OXM_TTT changes to TPA
Charkatak said:
Where does it show TTT? In the software version?
Click to expand...
Click to collapse
Yeah, the software version still shows the CSC as TTT/TTT, TTT/TPA. And it shows as SAOMC_SM-G975F_OXM_TTT.
Gdefreitas said:
Yeah, the software version still shows the CSC as TTT/TTT, TTT/TPA. And it shows as SAOMC_SM-G975F_OXM_TTT.
Click to expand...
Click to collapse
Just letting you know that I edited my previous message a bit where I included another version of Odin for you to try
Charkatak said:
Just letting you know that I edited my previous message a bit where I included another version of Odin for you to try
Click to expand...
Click to collapse
Do I need to flash it clean once again with the CSC, or can I use Home_CSC to keep my settings as I've already started to set the phone up again. And mind if I ask what the difference in the versions of Odin are?
Gdefreitas said:
Do I need to flash it clean once again with the CSC, or can I use Home_CSC to keep my settings as I've already started to set the phone up again. And mind if I ask what the difference in the versions of Odin are?
Click to expand...
Click to collapse
1) I mostly use regular CSC file as I like to clean everything, but try Home first, then regular csc if you don't like setting up the phone. Don't setup the phone next time until you get positive results
2) So I used "Odin3_v3.13.1_3B_PatcheD" that I included in the thread and also used Odin 3.13.1 and 3.13.3
3) If after flashing again, it won't change the firmware, then do this: get EON firmware, flash on your phone following the list of steps as you did previously.
4) Put the sim card in and see if there are any messages about carrier updates. This message is a good indication that firmware is getting changed(unless on international model message is different from US version)
5) Check the SW version in settings and then you will need to flash TPA firmware again, which should give you proper results.
I had to flash XAA firmware, then TMB to make my phone change to TMB and it took me multiple tries
Charkatak said:
1) I mostly use regular CSC file as I like to clean everything, but try Home first, then regular csc if you don't like setting up the phone. Don't setup the phone next time until you get positive results
2) So I used "Odin3_v3.13.1_3B_PatcheD" that I included in the thread and also used Odin 3.13.1 and 3.13.3
3) If after flashing again, it won't change the firmware, then do this: get EON firmware, flash on your phone following the list of steps as you did previously.
4) Put the sim card in and see if there are any messages about carrier updates. This message is a good indication that firmware is getting changed(unless on international model message is different from US version)
5) Check the SW version in settings and then you will need to flash TPA firmware again, which should give you proper results.
I had to flash XAA firmware, then TMB to make my phone change to TMB and it took me multiple tries
Click to expand...
Click to collapse
Ok, I'll try flashing a couple times. To be honest, I only started setting up the phone as I thought that was all that could be tried, didn't know there was some hope of it working after all. If I don't get to flash the EON firmware tonight, I'll be sure to try it tomorrow in hope that it actually changes. I think once it changes it should work, because the other s10+ and even the s8+ both have TPA and they're both unlocked on the same carrier. I have no idea why this one would have switched. As far as I can tell there isn't any TTT firmware for the S10+, there is one for the normal S10 however, so I'm really not sure.
Device: Samsung N960UZBAXAA
Firmware CSC code: XAA
Active CSC code: TMB
Device is unlocked & currently on Google Fi, running stock ROM
Got the android 10 update a few days ago, ever since then about once an hour I get a notification from OMADM saying 'firmware update not completed'. If I allow it to run I get error 407: the profile update could not be completed, at which point the update attempt cycles again and I get either 407 or 700 and it stops trying for an hour. Did a factory reset, no change, found a few other people on the Samsung forums with the same issue after the patch but no response or further info. Everything works, I can send and received texts + calls, but the firmware update message inevitably pops up again. Been reading up on using Odin, which leads me to my question- is it worth flashing the firmware myself/taking other steps I'm unaware of, or should I hold out in case of an OTA fix? And in the event that I do flash, would I look for firmware with the current CSC code, rather than the active CSC code?
Any and all advice appreciated!
Try wiping the Cache Partition in Recovery Mode and see if that helps. If it doesn't then take your device to a Samsung Service Center and let them take a look at it.
iceepyon said:
Try wiping the Cache Partition in Recovery Mode and see if that helps. If it doesn't then take your device to a Samsung Service Center and let them take a look at it.
Click to expand...
Click to collapse
Wiped the cache partition after the first failure, did a factory reset during testing, no change. Starting to think that a t-mobile sim might change things but I don't know enough to say for sure. Problem about the service centers is that I live in the boonies and to my knowledge there isn't one within a couple hours of me, so I'll have to send it out.
In that case try downloading the stock US Samsung Version of the OS and installing that onto your device.