Hi All,
Today, I unlocked bootloader and installed TWRP and took the backup of the existing MIUI and Installed Pixel OS. Phone is bootlooped now whenever i reboot it goes to TWRP
and all the data in the system is gone.
can somebody help me resolve this
Thanks in advance
Dharshan Parasu said:
Hi All,
Today, I unlocked bootloader and installed TWRP and took the backup of the existing MIUI and Installed Pixel OS. Phone is bootlooped now whenever i reboot it goes to TWRP
and all the data in the system is gone.
can somebody help me resolve this
Thanks in advance
Click to expand...
Click to collapse
Did you format data with "yes"? You must do it.
Hellera said:
Did you format data with "yes"? You must do it.
Click to expand...
Click to collapse
No, but cleared cache, is there any solution
Dharshan Parasu said:
Hi All,
Today, I unlocked bootloader and installed TWRP and took the backup of the existing MIUI and Installed Pixel OS. Phone is bootlooped now whenever i reboot it goes to TWRP
and all the data in the system is gone.
can somebody help me resolve this
Thanks in advance
Click to expand...
Click to collapse
Format data with yes, reinstall Pixel OS and boot into system.
Dharshan Parasu said:
No, but cleared cache, is there any solution
Click to expand...
Click to collapse
That is not enough, you MUST format data after installing a new rom to remove the old encryption.
With starting up the new installed rom, new encryption will be done again.
Elinx said:
That is not enough, you MUST format data after installing a new rom to remove the old encryption.
With starting up the new installed rom, new encryption will be done again.
Click to expand...
Click to collapse
Thanks it worked perfectly
Xavind said:
Format data with yes, reinstall Pixel OS and boot into system.
Click to expand...
Click to collapse
Thank you, Worked
Related
Here's the whole story:
I was on an unofficial build of RR CM13, encrypted, using TWRP 3.0.2-1.
I wiped data, dalvik, cache, and flashed the newest Official RR 7.1.1 and open-gapps.
I boot into the new ROM and start setting stuff up.
I restore some apps' data using Titanium Backup, then reboot.
On reboot I'm greeted with the device setup screen
I reboot, wipe, reflash a bunch of times
A few times:
When I rebooted after using the system my PIN doesn't decrypt the system/data (booting into the system)
When I rebooted after using TWRP my PIN does decrypt (booting into the system)
At some point during this I try wiping everything from TWRP, but it freezes, goes black, and then the notification LED turns white. I hold the power button and boot back to TWRP.
Apparently wiping /data is the problem (everything else wipes just fine if I do them individually)
I boot back into the system, set it up, and do a full factory reset from there (after offloading my stuff from Internal Storage)
Back to TWRP, now no matter what I flash or restore, I don't end up booting into the system, only into TWRP
I've also tried TWRP 3.0.4-0 (which wouldn't decrypt my data), and I've reflash TWRP a few times.
How do I actually boot into my system? It's been 7 hours, and I'm losing my mind.
Deleted
Boot to your ROM through the power button...
Manually..
Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Do what he said. You've already wiped your internal storage, so just start from scratch.
Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?
RustySpackleford said:
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?
Click to expand...
Click to collapse
flash twrp
adb push os zip
adb push su
flash all , if needed format data.
This is what I have done yesterday,
edit: If u brick I don't take any responsibility.
Deleted
TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .
uttam.ace said:
TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .
Click to expand...
Click to collapse
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:
bluuquthug said:
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:
Click to expand...
Click to collapse
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
uttam.ace said:
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Click to expand...
Click to collapse
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?
bluuquthug said:
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?
Click to expand...
Click to collapse
Your TWRP is working right!
go to TWRP/ Advanced/ADB Sideload
type "adb sideload /path/to/rom.zip"
Mate, recommend using ADB Sideload on TWRP itself is the only viable option you have. OR if that doesn't work and you still have the PIN issues, you should definitely use the Unbrick Tool and get everything back to Stock, and then reflash everything
Note: Using the unbrick tool will cause it to relock bootloader, so you're gonna have to start over again.
Cheers!
How to remove device encryption in my x526? I don't remember when the hell i did that encryption, please help without it i can't even flash custom rom in it because twrp is also asking for password.
P.s: in fingerprint and password, under encrypt section it is saying that it is encrypted
zephyr2329 said:
How to remove device encryption in my x526? I don't remember when the hell i did that encryption, please help without it i can't even flash custom rom in it because twrp is also asking for password.
P.s: in fingerprint and password, under encrypt section it is saying that it is encrypted
Click to expand...
Click to collapse
Format Phone from TWRP.
Mads71 said:
Format Phone from TWRP.
Click to expand...
Click to collapse
Did that already, didn't help me a bit
zephyr2329 said:
Did that already, didn't help me a bit
Click to expand...
Click to collapse
Which partitions have you formatted/did you wipe?
zephyr2329 said:
Did that already, didn't help me a bit
Click to expand...
Click to collapse
Just the default factory reset(data, cache, dalvic cache) but it did clear my internal storage though not being able to mount it. :/
Wipe Data, seen in above screenshot, of course it deletes all your apps and data, but it's the only way.
JamBax said:
Wipe Data, seen in above screenshot, of course it deletes all your apps and data, but it's the only way.
Click to expand...
Click to collapse
Did it many times even with stock recovery too, still same problem ?
Can you make a picture/photo of the error message after you booted into TWRP recovery?
JamBax said:
Can you make a picture/photo of the error message after you booted into TWRP recovery?
Click to expand...
Click to collapse
I'm in stock recovery now, and it's 1:35 am here, will upload ss tomorrow
Mounting is not a problem u need to get compatible adb driver for you computer then you can transfer any thing
zephyr2329 said:
Did it many times even with stock recovery too, still same problem
Click to expand...
Click to collapse
i have same prob.
i m also unable to mount /formatdata.
please help me.
Hi, unlocked bootloader today and tried to flash Xiaomi.EU (latest stable version). However, after power off and on, the phone boots direct into TWRP. Any help would be appreciated.
SirTAVARES said:
u needed to format data
Click to expand...
Click to collapse
Thanks - fairly certain I did but I'll try again.
SirTAVARES said:
u needed to format data
Click to expand...
Click to collapse
I've formatted everything and installed Xiaomi.eu - even though it says the OS wasn't installed the phone booted up fine. Why is this?
Thanks for your time
Hi Friends
I just got the message from TWRP app that there is a new version available. I just installed it through the app and then rebooted the phone.
And now the problem: It boots only into TWRP. I can't boot anymore into OS! I tried to flash with adb the former TWRP version and vbmeta. But it doesn't help. It still boots into TWRP only.
One strange thingt is, when I reboot, it shows me the "relame - Powered by Android" page for afew seconds. Then the page goes away for a second or so and it restarts again, and goes into TWRP.
Please help me. I urgently Need the phone.
Thanks a lot!
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
jhha said:
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Click to expand...
Click to collapse
Thank you! Unfortunately this is different problem and CN version.
Has anbody else an idea. Please!
Flash ozip stock, if it does not go up. format data and wipe cache & dalvik-cache. Reboot
zsonnguyenz said:
Flash ozip stock, if it does not go up. format data and wipe cache & dalvik-cache. Reboot
Click to expand...
Click to collapse
Thank you! Formatting data with the way, where you have to confirm with "yes" worked! Only this was necessary and it booted again to OS! Fortunately I could make a data backup with TWRP. But now the big question: I have a system with unlocked bootloader and C24 OS, as well as working FP. How to install now TWRP and Magisk, and how to get back the data?
@exadeci, @jhha
I guess you have experience in this. Would you be kind enough to share?
https://forum.xda-developers.com/showpost.php?p=81509817&postcount=78
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Sir Backe said:
Thank you! Formatting data with the way, where you have to confirm with "yes" worked! Only this was necessary and it booted again to OS! Fortunately I could make a data backup with TWRP. But now the big question: I have a system with unlocked bootloader and C24 OS, as well as working FP. How to install now TWRP and Magisk, and how to get back the data?
@exadeci, @jhha
I guess you have experience in this. Would you be kind enough to share?
https://forum.xda-developers.com/showpost.php?p=81509817&postcount=78
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Click to expand...
Click to collapse
I cannot flash magisk, it always bootloop, except the first time it is unlocked. And I am currently using the lieage rom. Did you flash it?
zsonnguyenz said:
I cannot flash magisk, it always bootloop, except the first time it is unlocked. And I am currently using the lieage rom. Did you flash it?
Click to expand...
Click to collapse
Yes I did. The canary version (see below the list on this page, section "Download"). Before I installed TWRP 3.3.1.13 and vbmeta.img, which I got from here (see section "To flash the TWRP" -> Modified VBMETA.
Hi Friends
After a long night with almost no sleeping I finally got a running system with TWRP 3.3.1.13, modified vbmeta.img, Magisk Canary and OS c24. For the first time in my life I bricked a phone just in various ways, one after the other. 2 horrible days are behind me, and i could only finally get a back a working system thanks to all of you, who supported me either in this thread or in various others where I was reading and actively asking questions, depending on the Problem I just had.
Thanks a lot to all of you. You are a great communitiy!
I'm having a big problem. I've had to unbrick my Mi11 ultra 5 times with the miflash tool because every time I flash the custom rom through TWRP it complete then reboots with no OS. I copy the rom to the phone. Go in to TWRP and then I go to install and find the zip file. I choose it and it goes through the process but it still reboots into TWRP with no OS. I've tried it with and without root with Magisk. WHAT AM I DOING WRONG?! Please help. Here is the link for the ROM I'm trying to use https://androidfilehost.com/?fid=14943124697586336463
Format data after flashing the EU ROM.
The first time you load the system, the screen will stay a loooong time with the MIUI logo; don't panic and be patient.
Hope it works for you.
Regards.
Yes, as above. If you don't format data with the confirmation of yes in the twrp wipe menu, it will alway go back to twrp.
The reason is that when you change kernal branch, there may be partition differences between them. A format clears out old data crossing the new partition layout and allows boot.
portamento said:
Format data after flashing the EU ROM.
The first time you load the system, the screen will stay a loooong time with the MIUI logo; don't panic and be patient.
Hope it works for you.
Regards.
Click to expand...
Click to collapse
Buddy as best try to flash over Fastboot, then after that install TWRP and mount all partitions. Then klick wipe-- factory reset and wipe and after that format data with confirm yes. after that you need to install inject TWRP inject. You can find it in ADVANCED. After that klick fix Contexts. And reboot.
After that the OS will reinstall . Try it, that will work 100%
portamento said:
Format data after flashing the EU ROM.
The first time you load the system, the screen will stay a loooong time with the MIUI logo; don't panic and be patient.
Hope it works for you.
Regards.
Click to expand...
Click to collapse
Sathelp said:
Yes, as above. If you don't format data with the confirmation of yes in the twrp wipe menu, it will alway go back to twrp.
The reason is that when you change kernal branch, there may be partition differences between them. A format clears out old data crossing the new partition layout and allows boot.
Click to expand...
Click to collapse
THANK YOU BOTH!!! IT WAS CAUSE I DIDNT FORMAT DATA AFTER THE ROM INSTALL!! Thank you so much
Mag_e said:
THANK YOU BOTH!!! IT WAS CAUSE I DIDNT FORMAT DATA AFTER THE ROM INSTALL!! Thank you so much
Click to expand...
Click to collapse
Glad to know that it worked . I had the same problem when I changed from European stock ROM to Xiaomi.eu one. The tutorials I read didn't say anything about formatting data after installing the new ROM.
Mag_e said:
I'm having a big problem. I've had to unbrick my Mi11 ultra 5 times with the miflash tool because every time I flash the custom rom through TWRP it complete then reboots with no OS. I copy the rom to the phone. Go in to TWRP and then I go to install and find the zip file. I choose it and it goes through the process but it still reboots into TWRP with no OS. I've tried it with and without root with Magisk. WHAT AM I DOING WRONG?! Please help. Here is the link for the ROM I'm trying to use https://androidfilehost.com/?fid=14943124697586336463
Click to expand...
Click to collapse
Check this steps