Related
Here's the whole story:
I was on an unofficial build of RR CM13, encrypted, using TWRP 3.0.2-1.
I wiped data, dalvik, cache, and flashed the newest Official RR 7.1.1 and open-gapps.
I boot into the new ROM and start setting stuff up.
I restore some apps' data using Titanium Backup, then reboot.
On reboot I'm greeted with the device setup screen
I reboot, wipe, reflash a bunch of times
A few times:
When I rebooted after using the system my PIN doesn't decrypt the system/data (booting into the system)
When I rebooted after using TWRP my PIN does decrypt (booting into the system)
At some point during this I try wiping everything from TWRP, but it freezes, goes black, and then the notification LED turns white. I hold the power button and boot back to TWRP.
Apparently wiping /data is the problem (everything else wipes just fine if I do them individually)
I boot back into the system, set it up, and do a full factory reset from there (after offloading my stuff from Internal Storage)
Back to TWRP, now no matter what I flash or restore, I don't end up booting into the system, only into TWRP
I've also tried TWRP 3.0.4-0 (which wouldn't decrypt my data), and I've reflash TWRP a few times.
How do I actually boot into my system? It's been 7 hours, and I'm losing my mind.
Deleted
Boot to your ROM through the power button...
Manually..
Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Do what he said. You've already wiped your internal storage, so just start from scratch.
Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?
RustySpackleford said:
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?
Click to expand...
Click to collapse
flash twrp
adb push os zip
adb push su
flash all , if needed format data.
This is what I have done yesterday,
edit: If u brick I don't take any responsibility.
Deleted
TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .
uttam.ace said:
TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .
Click to expand...
Click to collapse
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:
bluuquthug said:
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:
Click to expand...
Click to collapse
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
uttam.ace said:
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Click to expand...
Click to collapse
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?
bluuquthug said:
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?
Click to expand...
Click to collapse
Your TWRP is working right!
go to TWRP/ Advanced/ADB Sideload
type "adb sideload /path/to/rom.zip"
Mate, recommend using ADB Sideload on TWRP itself is the only viable option you have. OR if that doesn't work and you still have the PIN issues, you should definitely use the Unbrick Tool and get everything back to Stock, and then reflash everything
Note: Using the unbrick tool will cause it to relock bootloader, so you're gonna have to start over again.
Cheers!
Hi all
Sorry that my vocabulary wont be so pro.
I flashed yesterday EU stable rom 10.0.1.0.
Today I flashed back global 8.8.30 using twrp, wiped data and it has finish ok, but made loop boot and backed to twrp once again.
then flashed 9.5.13.0 global, ended OK, didn't boot well and backed me to recovery screen.
by ADB I tried to go back to TWRP and it boot to "the system has been destroyed".
Nothing i do not help, by info with ADB looks like the bootlouder is closed some how.
I cannot open in since it is writing me that the account not connected to the to the phone, and i cannot do anything since the phone is not going up.
any ideas?
dorone said:
Hi all
Sorry that my vocabulary wont be so pro.
I flashed yesterday EU stable rom 10.0.1.0.
Today I flashed back global 8.8.30 using twrp, wiped data and it has finish ok, but made loop boot and backed to twrp once again.
then flashed 9.5.13.0 global, ended OK, didn't boot well and backed me to recovery screen.
by ADB I tried to go back to TWRP and it boot to "the system has been destroyed".
Nothing i do not help, by info with ADB looks like the bootlouder is closed some how.
I cannot open in since it is writing me that the account not connected to the to the phone, and i cannot do anything since the phone is not going up.
any ideas?
Click to expand...
Click to collapse
if this is a Chinese version phone, you need to flash the region fix, and also the dm-verity disabler after the ROM and also wipe DATA.
Agimax said:
if this is a Chinese version phone, you need to flash the region fix, and also the dm-verity disabler after the ROM and also wipe DATA.
Click to expand...
Click to collapse
Hi
many thanks for your answer
How i am doing it?
phone is not working, not twrp.
tried now to flash chinese last rom - nogo
dorone said:
Hi
many thanks for your answer
How i am doing it?
phone is not working, not twrp.
tried now to flash chinese last rom - nogo
Click to expand...
Click to collapse
If you don't have TWRP anymore, and MIflashtool isn't working, then if your phone is still unlocked, flash the TWRP again through fastboot. If not, i'm not sure.
I have a Chinese to Global thread here-->https://forum.xda-developers.com/mi-8/help/chinese-mi8-to-global-instructions-t3839665
10.0.1.0 has ARB hasn't it?
_katho_ said:
10.0.1.0 has ARB hasn't it?
Click to expand...
Click to collapse
I not 100% sure but I will go for that also, its sad but probably he screw his phone.
1. he confirm he have locked bootloader
2. no access to system nor miflash detect so no bootloader unlock
3. no bootloader, so no flashing twrp.
I dont have any good news, nor any solution to even help you.
freeman94 said:
I not 100% sure but I will go for that also, its sad but probably he screw his phone.
Click to expand...
Click to collapse
Yep, everywhere I've seen MIUI 10 10.x stable have ARB. It's the reason I haven't flashed it, as I read before..
Hi Friends
I just got the message from TWRP app that there is a new version available. I just installed it through the app and then rebooted the phone.
And now the problem: It boots only into TWRP. I can't boot anymore into OS! I tried to flash with adb the former TWRP version and vbmeta. But it doesn't help. It still boots into TWRP only.
One strange thingt is, when I reboot, it shows me the "relame - Powered by Android" page for afew seconds. Then the page goes away for a second or so and it restarts again, and goes into TWRP.
Please help me. I urgently Need the phone.
Thanks a lot!
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
jhha said:
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Click to expand...
Click to collapse
Thank you! Unfortunately this is different problem and CN version.
Has anbody else an idea. Please!
Flash ozip stock, if it does not go up. format data and wipe cache & dalvik-cache. Reboot
zsonnguyenz said:
Flash ozip stock, if it does not go up. format data and wipe cache & dalvik-cache. Reboot
Click to expand...
Click to collapse
Thank you! Formatting data with the way, where you have to confirm with "yes" worked! Only this was necessary and it booted again to OS! Fortunately I could make a data backup with TWRP. But now the big question: I have a system with unlocked bootloader and C24 OS, as well as working FP. How to install now TWRP and Magisk, and how to get back the data?
@exadeci, @jhha
I guess you have experience in this. Would you be kind enough to share?
https://forum.xda-developers.com/showpost.php?p=81509817&postcount=78
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Sir Backe said:
Thank you! Formatting data with the way, where you have to confirm with "yes" worked! Only this was necessary and it booted again to OS! Fortunately I could make a data backup with TWRP. But now the big question: I have a system with unlocked bootloader and C24 OS, as well as working FP. How to install now TWRP and Magisk, and how to get back the data?
@exadeci, @jhha
I guess you have experience in this. Would you be kind enough to share?
https://forum.xda-developers.com/showpost.php?p=81509817&postcount=78
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Click to expand...
Click to collapse
I cannot flash magisk, it always bootloop, except the first time it is unlocked. And I am currently using the lieage rom. Did you flash it?
zsonnguyenz said:
I cannot flash magisk, it always bootloop, except the first time it is unlocked. And I am currently using the lieage rom. Did you flash it?
Click to expand...
Click to collapse
Yes I did. The canary version (see below the list on this page, section "Download"). Before I installed TWRP 3.3.1.13 and vbmeta.img, which I got from here (see section "To flash the TWRP" -> Modified VBMETA.
Hi Friends
After a long night with almost no sleeping I finally got a running system with TWRP 3.3.1.13, modified vbmeta.img, Magisk Canary and OS c24. For the first time in my life I bricked a phone just in various ways, one after the other. 2 horrible days are behind me, and i could only finally get a back a working system thanks to all of you, who supported me either in this thread or in various others where I was reading and actively asking questions, depending on the Problem I just had.
Thanks a lot to all of you. You are a great communitiy!
Last OS installed on the device was faulty and didn't boot properly and ran into alot of problems so I tried to install a new OS. Thing is, im not that good with this stuff, so I straight up went to bootloader, wiped everything there was to wipe and tried to flash gapps with the OS. It even may be in bootloop, but im not sure and don't know what that is exactly. I can't even flash a new ROM because the device is encrypted for no reason. ADB sideload didn't work, probably because there is no os on the device or because it wasn't put into developer mode. Some help would be amazing, maybe with just unlocking bootloader. I think i can handle installing OS.
mercule said:
Last OS installed on the device was faulty and didn't boot properly and ran into alot of problems so I tried to install a new OS. Thing is, im not that good with this stuff, so I straight up went to bootloader, wiped everything there was to wipe and tried to flash gapps with the OS. It even may be in bootloop, but im not sure and don't know what that is exactly. I can't even flash a new ROM because the device is encrypted for no reason. ADB sideload didn't work, probably because there is no os on the device or because it wasn't put into developer mode. Some help would be amazing, maybe with just unlocking bootloader. I think i can handle installing OS.
Click to expand...
Click to collapse
Not sure on encryption but wiping out everything should work.
I installed this ROM and it's working fine apart from couple of bugs.
If you can access TWRP give it a try.
PPGX5II said:
Not sure on encryption but wiping out everything should work.
I installed this ROM and it's working fine apart from couple of bugs.
If you can access TWRP give it a try.
Click to expand...
Click to collapse
I cannot even wipe everything, somehow it has worked before but now it doesn't. Just says that it can't wipe data and whenever I try to flash something, it can't even confirm the zip or whatever it's doing to it.
mercule said:
I cannot even wipe everything, somehow it has worked before but now it doesn't. Just says that it can't wipe data and whenever I try to flash something, it can't even confirm the zip or whatever it's doing to it.
Click to expand...
Click to collapse
Try to flash TWRP from above thread and then maybe try?
PPGX5II said:
Try to flash TWRP from above thread and then maybe try?
Click to expand...
Click to collapse
I can't flash anything, it won't let me.
mercule said:
I can't flash anything, it won't let me.
Click to expand...
Click to collapse
I mean using ADB command `fastboot flash recovery twrp.img`
PPGX5II said:
I mean using ADB command `fastboot flash recovery twrp.img`
Click to expand...
Click to collapse
the device doesn't show up on the devices list, so I don't think that will work
Hi All,
Today, I unlocked bootloader and installed TWRP and took the backup of the existing MIUI and Installed Pixel OS. Phone is bootlooped now whenever i reboot it goes to TWRP
and all the data in the system is gone.
can somebody help me resolve this
Thanks in advance
Dharshan Parasu said:
Hi All,
Today, I unlocked bootloader and installed TWRP and took the backup of the existing MIUI and Installed Pixel OS. Phone is bootlooped now whenever i reboot it goes to TWRP
and all the data in the system is gone.
can somebody help me resolve this
Thanks in advance
Click to expand...
Click to collapse
Did you format data with "yes"? You must do it.
Hellera said:
Did you format data with "yes"? You must do it.
Click to expand...
Click to collapse
No, but cleared cache, is there any solution
Dharshan Parasu said:
Hi All,
Today, I unlocked bootloader and installed TWRP and took the backup of the existing MIUI and Installed Pixel OS. Phone is bootlooped now whenever i reboot it goes to TWRP
and all the data in the system is gone.
can somebody help me resolve this
Thanks in advance
Click to expand...
Click to collapse
Format data with yes, reinstall Pixel OS and boot into system.
Dharshan Parasu said:
No, but cleared cache, is there any solution
Click to expand...
Click to collapse
That is not enough, you MUST format data after installing a new rom to remove the old encryption.
With starting up the new installed rom, new encryption will be done again.
Elinx said:
That is not enough, you MUST format data after installing a new rom to remove the old encryption.
With starting up the new installed rom, new encryption will be done again.
Click to expand...
Click to collapse
Thanks it worked perfectly
Xavind said:
Format data with yes, reinstall Pixel OS and boot into system.
Click to expand...
Click to collapse
Thank you, Worked