Hello everyone,
currently I am using the phone with the stable ROM 13.0.4 from xiaomi.eu
Recently I noticed that either my battery or the battery indicator of the phone is acting very strange.
When I charge the phone up to 100% it stays like that for almost an entire day, the second day it drops down to 85% and on the third day it rapidly decays down until it almost reaches 30%.
This seemed a little of to me so I researched the problem and tried the following solutions:
Calibrate the phones battery (I let it charge from 20% to 100% instead of from 0% to 100% though because I dont want to damage my battery too much)
I followed this tutorial from xiaomi.eu
In addition to that I was never using the 120W charger at all.
Do you have any further ideas what I could try to make the battery work better?
liqQxMt said:
Hello everyone,
currently I am using the phone with the stable ROM 13.0.4 from xiaomi.eu
Recently I noticed that either my battery or the battery indicator of the phone is acting very strange.
When I charge the phone up to 100% it stays like that for almost an entire day, the second day it drops down to 85% and on the third day it rapidly decays down until it almost reaches 30%.
This seemed a little of to me so I researched the problem and tried the following solutions:
Calibrate the phones battery (I let it charge from 20% to 100% instead of from 0% to 100% though because I dont want to damage my battery too much)
I followed this tutorial from xiaomi.eu
In addition to that I was never using the 120W charger at all.
Do you have any further ideas what I could try to make the battery work better?
Click to expand...
Click to collapse
Last Xiaomi EU rom is
xiaomi.eu_multi_XM11TPro_V13.0.6.0.SKDMIXM_v13-12.zip2022-07-234.0 GB
NOSS8 said:
Last Xiaomi EU rom is
xiaomi.eu_multi_XM11TPro_V13.0.6.0.SKDMIXM_v13-12.zip2022-07-234.0 GB
Click to expand...
Click to collapse
Thanks for your reply, I have two questions regarding that.
1. How do I install the update? I ve seen the terms Mi Flash Tool, TWRP etc.
2. Will that reset my entire device?
liqQxMt said:
Thanks for your reply, I have two questions regarding that.
1. How do I install the update? I ve seen the terms Mi Flash Tool, TWRP etc.
2. Will that reset my entire device?
Click to expand...
Click to collapse
2/Nope
If you don't have twrp installed,install it, or update it.
https://dl.akr-developers.com/?dir=skkk/TWRP/A12/v6.2_A12
Then Use OTA.
NOSS8 said:
2/Nope
If you don't have twrp installed or update it.
https://dl.akr-developers.com/?dir=skkk/TWRP/A12/v6.2_A12
Then Use OTA.
Click to expand...
Click to collapse
Sorry for all the questions I am quite new to the flashing process but
How do I install twrp
What is OTA?
liqQxMt said:
Sorry for all the questions I am quite new to the flashing process but
How do I install twrp
What is OTA?
Click to expand...
Click to collapse
Make a backup with Micloud just in case.
Remove all lockscreen security
https://forum.xda-developers.com/t/install-twrp-for-xiaomi-11t-pro.4398007/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can I somehow change the language from the TWRP Image that you sent me? Currently its in Chinese I think
liqQxMt said:
Can I somehow change the language from the TWRP Image that you sent me? Currently its in Chinese I think
Click to expand...
Click to collapse
Do you know if the TWRP flashing removed my root permissions?
liqQxMt said:
Do you know if the TWRP flashing removed my root permissions?
Click to expand...
Click to collapse
Not the TWRP but the update .
Unroot before all operations.
NOSS8 said:
Not the TWRP but the update .
Unroot before all operations.
Click to expand...
Click to collapse
Oh I see and how do I unroot then before I install the new update?
liqQxMt said:
Oh I see and how do I unroot then before I install the new update?
Click to expand...
Click to collapse
Use Magisk app.
The Magisk app got removed from the TWRP flashing process.
If I install the app again it seems like the root permissions are gone:
So in theory I should be save to install the new update now, right?
liqQxMt said:
The Magisk app got removed from the TWRP flashing process.
If I install the app again it seems like the root permissions are gone:
So in theory I should be save to install the new update now, right?
Click to expand...
Click to collapse
Uninstall Magisk(root and modules removed).
reboot
Update the rom
install Magisk
Alright thank you, everything worked fine and the system is now updated and rooted.
The question that still remains is whether this will help with the battery drain or not
I'm updating without removing magisk before and everything works fine.
Reboot to twrp, flash update.zip, flash magisk.zip and then youre good to go. Even with lockscreen pin works in twrp.
I use these modules for better battery life: universal gms doze & uperf.
Spillunke said:
I'm updating without removing magisk before and everything works fine.
Reboot to twrp, flash update.zip, flash magisk.zip and then youre good to go. Even with lockscreen pin works in twrp.
I use these modules for better battery life: universal gms doze & uperf.
Click to expand...
Click to collapse
What does the uperf module do? Its all in chinese so I cant read all of that
liqQxMt said:
What does the uperf module do? Its all in chinese so I cant read all of that
Click to expand...
Click to collapse
"Userspace performance controller for android."
I can't read that too, but someone listed it for saving battery and I tested/installed it.
In combination with gms doze, i think the battery lasts longer, but overall it could be better. Don't know if there is more to save with other modules or apps.
Seven days ago i bought new xiaomi 11T pro. mine also xiaomi 11T pro very wrost battery backup. 120 watt charging time 25 minute. 33 watt charging time 1 hrs. How to increase battery backup without root. I also done battery callibrate two times.
liqQxMt said:
Alright thank you, everything worked fine and the system is now updated and rooted.
The question that still remains is whether this will help with the battery drain or not
Click to expand...
Click to collapse
Update:
The system update seemed to have fixed my battery issues i m getting somewhere around 2 - 3 days out of one 80% charge now!
Related
Guys, I have a serious problem. First, look at the pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what happened (and keeps happening):
Phone randomly boots whether I am on 3G or WiFi. Also, it boots when the phone is challenged to open a webpage, load an image or an app wants a bit more processing power. When it boots after the crash the battery hits 0! So it gets stuck in a boot loop because it thinks there is no battery juice left. The only way to successfully boot is to plug in the charger. So, I am royally screwed if when this happens outside.
I am currently running Slimkat 8.12.1 and I tried Maclaw's Carbon (20141119 release)...same problem! Is the battery dying one me? (My S3 Mini is 1 year old) If so, I will immediately buy one if this is gonna solve the problem. Because my phone right now is pretty much useless and super unstable.
PS: I also have super steep battery drain issue. I wake the phone to check an email and browse for a bit...and BLAM! it hits the bottom! see:
also people with an s3 mini older than a year, how is your battery health?
anyone else having the same problem?
wtx1033 said:
also people with an s3 mini older than a year, how is your battery health?
anyone else having the same problem?
Click to expand...
Click to collapse
I have this phone for about 15 months and i'm on Slimkat (by Android-Andi) for 6 months with no problem with the battery until now. I suggest to replace your battery to fix the random reboots. After that a new clean install of the Slimkat (or the rom of your choice) can help. Now if you want to see what drains your battery install the BetterBatteryStats or the Wakelock Detector. The Greenify helps also after. I hope that all these can help you.
jstath1972 said:
I have this phone for about 15 months and i'm on Slimkat (by Android-Andi) for 6 months with no problem with the battery until now. I suggest to replace your battery to fix the random reboots. After that a new clean install of the Slimkat (or the rom of your choice) can help. Now if you want to see what drains your battery install the BetterBatteryStats or the Wakelock Detector. The Greenify helps also after. I hope that all these can help you.
Click to expand...
Click to collapse
ok i ordered a new battery. btw, by clean install do you mean i should avoid restoring my helium backup of apps?
wtx1033 said:
ok i ordered a new battery. btw, by clean install do you mean i should avoid restoring my helium backup of apps?
Click to expand...
Click to collapse
TWRP Recovery clean install:
Reboot to TWRP recovery
Choose wipe/advanced wipe
Choose Dalvik Cache/System/Cache/Data/Internal Storage
Swipe to wipe
Flash new rom/gapps
Wipe Dalvik Cache and Cache
Reboot.
And finaly avoid restoring your helium backup of app.
jstath1972 said:
TWRP Recovery clean install:
Reboot to TWRP recovery
Choose wipe/advanced wipe
Choose Dalvik Cache/System/Cache/Data/Internal Storage
Swipe to wipe
Flash new rom/gapps
Wipe Dalvik Cache and Cache
Reboot.
And finaly avoid restoring your helium backup of app.
Click to expand...
Click to collapse
I'll do that (my new battery just arrived ) should I also avoid Google automatic restore?
wtx1033 said:
I'll do that (my new battery just arrived ) should I also avoid Google automatic restore?
Click to expand...
Click to collapse
No... allow the Google automatic restore. Btw i recommend you to install this http://forum.xda-developers.com/showthread.php?t=2758098 rom or this http://forum.xda-developers.com/showthread.php?t=2666235 because in my opinion they are the most stable. Good flashing.:fingers-crossed:
okay
jstath1972 said:
No... allow the Google automatic restore. Btw i recommend you to install this http://forum.xda-developers.com/showthread.php?t=2758098 rom or this http://forum.xda-developers.com/showthread.php?t=2666235 because in my opinion they are the most stable. Good flashing.:fingers-crossed:
Click to expand...
Click to collapse
i was gonna flash slimkat 8.14
already using 8.12 and i am happy with this ROM
wtx1033 said:
i was gonna flash slimkat 8.14
already using 8.12 and i am happy with this ROM
Click to expand...
Click to collapse
Good choice :good:
Hi . I have SM-N920C and my phone does not go to deep sleep . I have used smart switch reinstalled firmware also i flash other firmwares with odin but nothing helps . Android os and Android system are draining battery . I have not installed any apps , turned of WIFI GPS SYNC and disabled all the apps . I am not rooted . here are some screenshots before and after night
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm facing the same problem, though i have 920CD i flashed latest 920C firmware.
Overnight i lose 20% battery in span of 7 hrs. I guess u have to flash custom kernel then it iwll hlep.
This is what I posted in another thread for someone having high Android OS battery issues (he found out it was actually Google play services keeping device awake). http://forum.xda-developers.com/showthread.php?p=63020566
There is also a battery saving tips thread in the at&t general section with some good things to try.
Sent from my SM-N920T using Tapatalk
varun.gid said:
I'm facing the same problem, though i have 920CD i flashed latest 920C firmware.
Overnight i lose 20% battery in span of 7 hrs. I guess u have to flash custom kernel then it iwll hlep.
Click to expand...
Click to collapse
with custom kernel my phone re boots during call
anriabu said:
Hi . I have SM-N920C and my phone does not go to deep sleep . I have used smart switch reinstalled firmware also i flash other firmwares with odin but nothing helps . Android os and Android system are draining battery . I have not installed any apps , turned of WIFI GPS SYNC and disabled all the apps . I am not rooted . here are some screenshots before and after night
Click to expand...
Click to collapse
If it is not an app causing this, then if you are rooted, you will require a custom kernel compiled with the appropriate patch to fix. My own SkyHigh kernel has this fix, but will (currently) randomly reboot during call. Haven't yet the time or opportunity until end of this week to fix that though
thanks for reply
UpInTheAir said:
If it is not an app causing this, then if you are rooted, you will require a custom kernel compiled with the appropriate patch to fix. My own SkyHigh kernel has this fix, but will (currently) randomly reboot during call. Haven't yet the time or opportunity until end of this week to fix that though
Click to expand...
Click to collapse
I flash your kernel but I can't stand reboot during call . I'm sure you will probably find a way to fix this . thanks in advance
anriabu said:
I flash your kernel but I can't stand reboot during call . I'm sure you will probably find a way to fix this . thanks in advance
Click to expand...
Click to collapse
Yes, I have an idea, so hopefully something fixed not long after I return home end of this week. Stay tuned to my thread for any development update.
UpInTheAir said:
Yes, I have an idea, so hopefully something fixed not long after I return home end of this week. Stay tuned to my thread for any development update.
Click to expand...
Click to collapse
Can you please share the kernel fix, coz it's literally not possible to use the Phone feature anymore! :crying:
Call Reboot issue.
anmolkakkar said:
Can you please share the kernel fix, coz it's literally not possible to use the Phone feature anymore! :crying:
Call Reboot issue.
Click to expand...
Click to collapse
Hey, neither can I !!
Please don't pester, I've just got home from travelling and jet-lag. I told everyone to keep an eye on the SkyHigh kernel thread, when it is fixed, new kernel will be posted, not before. I can not make magic ...........
UpInTheAir said:
. I can not make magic ...........
Click to expand...
Click to collapse
Why not? I always thought that Thai food was magic...
UpInTheAir said:
Hey, neither can I !!
Please don't pester, I've just got home from travelling and jet-lag. I told everyone to keep an eye on the SkyHigh kernel thread, when it is fixed, new kernel will be posted, not before. I can not make magic ...........
Click to expand...
Click to collapse
Pester?
I'd not use that word if you are not sure of your work. I feel sorry for your choice of words.
Don't need your fix please. Will reach to someone more generous.
Feel better from jet-lag. :good:
anmolkakkar said:
Pester?
I'd not use that word if you are not sure of your work. I feel sorry for your choice of words.
Don't need your fix please. Will reach to someone more generous.
Feel better from jet-lag. :good:
Click to expand...
Click to collapse
The dev already clearly stated he may have found a solution (which is great!) and he will get to it as soon as he gets back home. What more do you want
You are very ungrateful indeed...so yes, please do go somewhere else :victory:
daffie said:
The dev already clearly stated he may have found a solution (which is great!) and he will get to it as soon as he gets back home. What more do you want
You are very ungrateful indeed...so yes, please do go somewhere else :victory:
Click to expand...
Click to collapse
Thanks for your suggestions which weren't asked for
:good:
Hi,
i have finally solved this big problem with my n920c battery drain! The guilty was Audiomix process in android system.
Just disable this in audio settings:
http://s11.postimg.org/6ulkw31qb/2015_10_02_10_14_03.jpg
Tonight i lose only 2%!
(sorry my phone is in italian, but hope this help!)
anmolkakkar said:
Thanks for your suggestions which weren't asked for
:good:
Click to expand...
Click to collapse
To be fair, your opinion wasn't asked for either.
anriabu said:
Hi . I have SM-N920C and my phone does not go to deep sleep . I have used smart switch reinstalled firmware also i flash other firmwares with odin but nothing helps . Android os and Android system are draining battery . I have not installed any apps , turned of WIFI GPS SYNC and disabled all the apps . I am not rooted . here are some screenshots before and after night
Click to expand...
Click to collapse
varun.gid said:
I'm facing the same problem, though i have 920CD i flashed latest 920C firmware.
Overnight i lose 20% battery in span of 7 hrs. I guess u have to flash custom kernel then it iwll hlep.
Click to expand...
Click to collapse
Install Wakelock Detector to find out what's causing the battery drain.
It is very strange that your doesn't sleep. I test my device N920C if it sleeps. I charged my phone yesterday evening at 19:00 and let it untouched until today at almost 12:00! To my surprise the phone has lost only 4% (96%)!
Tapatalked with my Note 5
I have turn them all but it does not help
UpInTheAir said:
If it is not an app causing this, then if you are rooted, you will require a custom kernel compiled with the appropriate patch to fix. My own SkyHigh kernel has this fix, but will (currently) randomly reboot during call. Haven't yet the time or opportunity until end of this week to fix that though
Click to expand...
Click to collapse
just flashed your updated kernel and PROBLEM IS THAT IN DISPLY SETTINGS WHEN I TURN ON AMOLED CINEMA SOMETHING HAPENDS WITH COLORS , IT'S LIKE BROKEN SCREEN
Hey so I realized that Magisk won't open after update v22 if im not mistaken. It just opens, asks to do a "full installation", when I press ok it does some stuff in the background and closes asking to restart the app over and over. I'm confused why this happens as Magisk has worked previously.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a samsung galaxy note 4 (snapdragon) with a custom rom running on android 10.
goto magisk github and download magisk v22 apk manually then install it usually when that error box show it open google chrome but on your case it didn't ...
oh upon reinstalling it, it seems like the app "works" now for the most part but I have a new issue. I have lost root access and can't manage to get it working back. I flashed the apk in my recovery as the instruction said, according to twrp logs everything installed properly (didnt exit with any error codes) and after I rebooted my phone Magisks detected the installed state as N/A.
Any idea why?
N1PE said:
oh upon reinstalling it, it seems like the app "works" now for the most part but I have a new issue. I have lost root access and can't manage to get it working back. I flashed the apk in my recovery as the instruction said, according to twrp logs everything installed properly (didnt exit with any error codes) and after I rebooted my phone Magisks detected the installed state as N/A.
Any idea why?
Click to expand...
Click to collapse
so previously you have magisk fully working but decided to update Magisk to v22 then now it just show N/A on Installed?
ineedroot69 said:
so previously you have magisk fully working but decided to update magisk to v22 then now it just show N/A on Installed?
Click to expand...
Click to collapse
yeah pretty much, didn't notice there was an issue after installing at first since I only occasionally use root for few miscleanous stuff
N1PE said:
yeah pretty much, didn't notice there was an issue after installing at first since I only occasionally use root for few miscleanous stuff
Click to expand...
Click to collapse
since its say N/A you need to reinstall it like from the beginning
what do you mean, I already uninstalled the app and tried reflashing it like 5 times
N1PE said:
what do you mean, I already uninstalled the app and tried reflashing it like 5 times
Click to expand...
Click to collapse
https://i.pinimg.com/236x/77/19/e2/7719e28b56018268fff940a8c1f49afc.jpg
how did this happen anyway? so you are running magisk then installed update 22.0 did you follow the changelog? it say you need to disable Magisk Hide before upgrading to v22.0
oh I think I might not have disabled it, either ways when I updated to v22 I just casually installed it like any other updates so far...
N1PE said:
oh I think I might not have disabled it, either ways when I updated to v22 I just casually installed it like any other updates so far...
Click to expand...
Click to collapse
you're still lucky since your device is still in working conditions there are user who completely bricked there device and force to buy new one since they can't fix the bootloop cause by Magisk 22.0 for not reading the changelog ...
ohhhh wait I fixed it, there were 2 Magisk manager apps somehow so after uninstalling the older one, everything works normally now
N1PE said:
ohhhh wait I fixed it, there were 2 Magisk manager apps somehow so after uninstalling the older one, everything works normally now
Click to expand...
Click to collapse
https://i.pinimg.com/750x/55/d8/3c/55d83c65008c4b856758fffc64efe39e.jpg
thank you so much for your time, I have one last question though: how do I close a thread/mark as solved/ or archive it.
I'm new to XDA so don't really know
N1PE said:
thank you so much for your time, I have one last question though: how do I close a thread/mark as solved/ or archive it.
I'm new to XDA so don't really know
Click to expand...
Click to collapse
you can't
ineedroot69 said:
you're still lucky since your device is still in working conditions there are user who completely bricked there device and force to buy new one since they can't fix the bootloop cause by Magisk 22.0 for not reading the changelog ...
Click to expand...
Click to collapse
Solving the same issue as OP right now. Can't see about disabling magisk hide in the changelog, am I at the right page? https://topjohnwu.github.io/Magisk/changes.html
EDIT: nevermind, found it: https://topjohnwu.github.io/Magisk/releases/22000.html
Anyway is there a way how to disable Magisk Hide without Magisk Manager?
Hello I have the same problem. I Updated magisk to 23.0 without disabling the hide magisk. Root seems to be lost , NA indicated in magisk. Magisk manager no more available. I can't see any magisk manager installed anywere. I did you succeed to remove one magisk manager ? Using which tool ? I use a redmi note 9 pro
A bit of a necro, so I won't tag the OP, but when something is resolved, you can either Edit the OP, or choose the three-dots in the upper-right corner of the OP, and choose Edit, and then add the tag:
[SOLVED]
in front of the current thread title.
The poster can additionally Report the OP and ask that the thread be closed, if necessary.
Cheers!
Hello.
I have even seen, that the 12.5.5.0 Update is available via the Mi Community Rom Downloads Page.
The Fastboot and the Recovery Update is available.
Even is the 12.5.7.0 for the global version available.
Here is the Changelog:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Even i seen that the Memory Extension could be acticate
And the Boot Logo has been Changed like on the Chinese Rom.
Just installing it
Edit: can confirm that memory extension is turned on by default, i turned it off and it required a restart.
In battery settings, there is a new performance mode. Haven't tried yet.
dragganta said:
Just installing it
Edit: can confirm that memory extension is turned on by default, i turned it off and it required a restart.
Click to expand...
Click to collapse
Can confirm this option is placebo and useless (because i have this option from the first CN release)
Some users feedback Memory extension causing lags.
And optimization are in fact a big underclock (for fix heat issues).
Pho3nX said:
Memory extension is a placebo and even feedback some users said causing lags.
Click to expand...
Click to collapse
Memory extension is probably just a type of swap memory, and since storage flash memory is slower than RAM, when it is in use you can expect lags.
b0nebreaker said:
Memory extension is probably just a type of swap memory, and since storage flash memory is slower than RAM, when it is in use you can expect lags.
Click to expand...
Click to collapse
Yes it can be usefull on a device with 3/4 GB but cleary not on a Mi 11 with 8 GB
Advice needed on rooted Mi 11. No TWRP installed.
When I update, should I download the fastboot version, use miflash, then pick the option to "save user data"?
Thanks.
seemebreakthis said:
Advice needed on rooted Mi 11. No TWRP installed.
When I update, should I download the fastboot version, use miflash, then pick the option to "save user data"?
Thanks.
Click to expand...
Click to collapse
You can use OTA like an unrooted user (not fastboot) and reapply Magisk with special OTA option BEFORE restart System for keep your Root
What is your actual ROM / Branch, if it's an official update on the same branch (EEA) RKEUXM > RKEUXM or (Global International) RKMIXM > RKMIXM etc... You can just follow my guide with Screenshots here
Pho3nX said:
What is your actual ROM / Branch, if it's an official update on the same branch (EEA) RKEUXM > RKEUXM or (Global International) RKMIXM > RKMIXM etc... You can just follow my guide with Screenshots here
Click to expand...
Click to collapse
Thanks so much. Mine is RKBEUXM (EEA). When I bought the phone it was on Global. First thing I did was bootloader unlock then wiped and flashed and debloated before I started using my phone.
Will give your guide a try ! Thanks again.
seemebreakthis said:
Thanks so much. Mine is RKBEUXM (EEA). When I bought the phone it was on Global. First thing I did was bootloader unlock then wiped and flashed and debloated before I started using my phone.
Will give your guide a try ! Thanks again.
Click to expand...
Click to collapse
Yes, so enjoy OTA Root
Pho3nX said:
Can confirm this option is placebo and useless (because i have this option from the first CN release)
Some users feedback Memory extension causing lags.
And optimization are in fact a big underclock (for fix heat issues).
Click to expand...
Click to collapse
If I install the Chinese version, does everything in the global one work, or is there something that cannot be used?
Wahoux said:
In battery settings, there is a new performance mode. Haven't tried yet.
Click to expand...
Click to collapse
Can't find this option under battery..
Someone else can confirm?
krokanic said:
Can't find this option under battery..
Someone else can confirm?
Click to expand...
Click to collapse
Confirming it:
I don't have this in the latest eea 12.5.5 update.
krokanic said:
Can't find this option under battery..
Someone else can confirm?
Click to expand...
Click to collapse
It's on Settings > Additional Settings > Memory extension
Pho3nX said:
It's on Settings > Additional Settings > Memory extension
Click to expand...
Click to collapse
I am talking about the performance mode. That's odd... Maybe by region or language blocked...
Pho3nX said:
Yes, so enjoy OTA Root
Click to expand...
Click to collapse
Just updated with your guide. No issues !
One thing to note for the benefit of others: when you reboot for the first time after update and magisk install, the booting time can last a few minutes. You will see the MI logo and 3 dots with running lights at the bottom during this process. Normal.
Also if you have AFWall+ and / or ad blockers like Adaway setup to block your phone from accessing Xiaomi servers, this method will fail because it tries to verify the .zip file by connecting to Xiaomi. So you have to turn off these protections. This to me is actually a little less than ideal, so maybe next time I will see if I can install via fastboot / recovery or something like that.
Of course if this is not a concern, then the guide is still an easy and straightforward way of updating your MIUI. Thanks again to Pho3nX
Strange, it just appeared
My battery life is now very bad with this update...4hrs sot max instead of 7hrs that i used to have. I debloated the phone and disabled everthing.
Today I received the 12.5.7.0 update.
Introduction:
This kernel matches the way I use my phone , and in includes the features that I find important
* Only roms that dropped pixel halls supported.
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
Kernel features:
- always upstreamed toto latest linux and caf tags
- wireguard support
- devfreq boost
- cpu input boost
- simple low memory killer
- kcal support
- audio control (headset gains,etc)
- stock cpu and gpu frequencies , no oc of any kind
- some others I don't remember , check source
Telegram channel: https://t.me/ironkernel
Source: https://github.com/kerolosel3w/Iron-Kernel-Personal
Download: https://www.mediafire.com/folder/vdmyzp8kwxwb8/Cepheus
Credits:
kernel is based on utsavthecunt's source
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cool see that Mi9 community is rising
Is there a way to get 72hz screen oc..?
dmn917 said:
Is there a way to get 72hz screen oc..?
Click to expand...
Click to collapse
Nope , screen oc isn't supported
Only A12?
Vũ Văn Lộc said:
Only A12?
Click to expand...
Click to collapse
a11 and a12 supported
How's battery backup?
Zep0th said:
How's battery backup?
Click to expand...
Click to collapse
I am getting average between 5~6 hours sot , with original 2.5 years old battery
el3w said:
a11 and a12 supported
Click to expand...
Click to collapse
Fingerprint project elixir A12 not working but very nice, omg so smooth. It's like after upgrading to a12 my machine is squeezing performance and this kernel makes it super smooth like A9
installed on a11 pixel experience and over night my phone was found shut off and i can't turn it on anymore, it's literally dead. Help?
Zep0th said:
installed on a11 pixel experience and over night my phone was found shut off and i can't turn it on anymore, it's literally dead. Help?
Click to expand...
Click to collapse
Do a force reboot ( hold power button for 10 seconds ). And about that freeze bug I am still trying to fix it.
el3w said:
Do a force reboot ( hold power button for 10 seconds ). And about that freeze bug I am still trying to fix it.
Click to expand...
Click to collapse
i have been trying and nothing. i think it's dead.
Zep0th said:
i have been trying and nothing. i think it's dead.
Click to expand...
Click to collapse
Hello, does it let you enter fastboot mode by pressing volume (-) less and power?
If you can enter fastboot mode, I think you should install a Miui rom for fastboot and you can recover the phone.
Regards
juansan10 said:
Hello, does it let you enter fastboot mode by pressing volume (-) less and power?
If you can enter fastboot mode, I think you should install a Miui rom for fastboot and you can recover the phone.
Regards
Click to expand...
Click to collapse
no ): i have tried everything for the past 6 hours. no sign of life..
Zep0th said:
no ): i have tried everything for the past 6 hours. no sign of life..
Click to expand...
Click to collapse
It has a battery, right? Does it do something if you put it to charge?
juansan10 said:
It has a battery, right? Does it do something if you put it to charge?
Click to expand...
Click to collapse
it has 80% battery, when i put it in the charger it does absolutely nothing. just a black screen.
I have been using this kernel for 2 days and have a very serious problem with this kernel, every time I restart my phone it stays on the black screen for a long time, about 8 9s and the longest it takes about 20s, then it shows the MI logo. I tried to install 1 China rom and 1 EU dev version but my problem only solved when i flashed them all again with miflash
I am using this kernel for 3 days without any issues in crDroid.
Thank you sir for your work I will definitely give it a try but I just wanna verify with you , does this kernel support the system to read bigger battery size than 3300 mah ??
In android 9 or 10 it was supported by MrAkash but for now I tried many AOSP roms and all of them are reading onl 3300 in system and in Fk kernel manager while my battery is 4200mah and many people are using 4000 also
Thank you so much if you add this option I would really appreciate it
Zep0th said:
it has 80% battery, when i put it in the charger it does absolutely nothing. just a black screen.
Click to expand...
Click to collapse
Hello, could you solve it and how?
The same has happened to me with my Xiaomi Mi9.
My Xiaomi Mi 9 has remained as dead and now it does not go into recovery mode and neither in fastboot mode, I connect it to the computer and it recognizes it but I cannot access the bootloader mode to be able to install a rom for fastboot and it gives me an error when it does not recognize it.
If I connect it to the charger it does nothing at all ...
Could it be that the battery has died?
Could someone help me see if I can fix it or nothing can be done?
Thank you anyway