Database Develop

screen problems?

i got my td2 just about a week. yesterday suddenly the touchscreen didnt work at all anymore! i was taking some pictures and then it stopped to do anything on the touchscreen. i rebootet the device few times but no go - even removed the battery but didnt work anymore. then i left the device a few minutes without battery and when i tried it again it worked. this scared me a little... because without touchscreen u are really lost with this phone.
ohwell.. i hope this doesnt happen again. but i actually got another strange thing here:
if i look into the screen from the side.. i can see a strange glimmer sometimes. it looks like oil in water... it does glimmer a little and its not visible all over the screen but the part does even grow. i noticed this yesterday and it was like 5cm long and 2cm width. but now its almost on the full screen and it looks like the effect when u press on a LCD screen really hard. but it appears without doing anything.. does anyone have that too on his TD2??

same problem here. its the device of a friend. one week old. but we didn´t managed it to bring it back to life again...
no we will try a hard reset.
battery was out for ar least 30min wizhout success.
even noticed some glimmer at the screen. hard to describe. like liquid between sreen and screen protector.... but only on those parts were we tapped on the screen...
no we try the hard reset - i´ll report how it worked.
somebody else with that problem here?

ok we tried a hard reset - no success. screen is dead. no way to setup the device. no reaction of the touch screen. will go to the o2 shop tomorrow and bring it back...

wow.. at least im not the only one. my screen is working again but the glimmer didnt go away. also today appeared one more defect on the screen - it looked like the protection plastic is moving, but then after some tapping on the screen it went away again. very strange!
the glimmer looks indeed like a liquid between the screen and the protection. sometimes its almost not visibe and sometimes its really good to see. i wonder whats going on here..

hey i just found something out!!
my screen has something like little bubbles under it when i do touch it on a certain area. when these bubbles are visible.. my screen does not work anymore!! then i can clean the screen a while with a tissue or my tshirt or whatever and the bubbles go away - as soon they are not visible anymore the touchscreen works again!!!
im tryin now to give that phone back and get a new one. i dont even have that phone 1 week!!

I have a Diamond2 with the same frozen screen issue. The screen just did not react to any tap. Soft reset may put it back to work again, but the symptom repeated after some time. Even hard reset cannot rectify the problem. It is hardware defect. Fortunately it is one week old and still within the one-to-one exchange policy and I can take back to the shop I bought push for an exchange. Having email HTC and they just ask for service check and refuse to exchange a new one. If you conduct a Google search of freeze screen, you may locate a lot of touch screen issue but only very limited solution. I suggest you to have the device exchange than going to repair.

Does it look like this: http://forum.xda-developers.com/showthread.php?p=2557175#post2557175???

Hi, I am experiencing the very same problem. Touchscreen stopped working. Taking out the battery for 5 minutes fixed it. But there is a oily liquid now beneath the screen. My device is 5 days old, this should not happen
Taking it to the shop on monday.

we tried everything but without any succes...
today we gave back the phone. it was within the one week limit. but there is another limitation: 15 minutes airtime! i said to the guy in that shop: when he can show me the airtime, we keep the phone - because than the screen seems to work again... )
but no problem they exchanged it against a new one! good service, very customer friendly at o2!

I encountered this one day after getting my unit. I got a replacement. It seems two layers of the touch screen is "stucked" together. Use scotch tape to lift up the area and and the touch screen responds. But the next time you press on the screen it will get stuck again.
So get it changed.

wow
what a great idea... never ever thought of that... *lol* but when you buy such a sophisticated mobile it looks very unsophisticated to lift your screen with scotch-tape everytime you tapped on the screen...

muuu said:
Does it look like this: http://forum.xda-developers.com/showthread.php?p=2557175#post2557175???
Click to expand...
Click to collapse
kinda yes. but not that big and after cleaning phone with a tissue it goes away. i will get a replacement in a few days.. hope this doesnt happen again - but shop told me it seems that there are a few ppl with that problem on td2!! :-(

ok i did get a replacement now and all is fine again. but i think i know what caused the problem.
actually i had the phone always in my back pocket of my jeans. this is not a very good idea when you sit down. the phone gets some pressure on the screen and my screen actually was lowered into the case a little bit. you can see this from the side. that did cause the air under the screen and also the oily liquid that sometimes appeared. so i think the screen felt into the phone case and this was causing the problems. my new phone does not look like the screen is lowered - its totally flat. so i will take more care and not using back pocket of my jeans again to put the phone in

cko2 said:
ok i did get a replacement now and all is fine again. but i think i know what caused the problem.
actually i had the phone always in my back pocket of my jeans. this is not a very good idea when you sit down. the phone gets some pressure on the screen and my screen actually was lowered into the case a little bit. you can see this from the side. that did cause the air under the screen and also the oily liquid that sometimes appeared. so i think the sYcreen felt into the phone case and this was causing the problems. my new phone does not look like the screen is lowered - its totally flat. so i will take more care and not using back pocket of my jeans again to put the phone in
Click to expand...
Click to collapse
I hope you are joking... I mean one can't be serious about carrying a touch screen device in a back pocket of his jeans. Are you even surprised about what happened to it? In fact I'm rather surprised you got a warranty replacement. There is a thing called User manual that comes with the device a it is saying 'Always remove the device from the pocket of your trousers prior to sitting down'. Yu are really lucky indeed you got a replacement....

well aint a mobile phone made for putting in the pocket? this is not my first phone and i never had such a problem even with a touchscreen phone. its not like i did sit on it with full force or something.. just had it in back pocket during cardriving. you can easy do that with any other phone without breaking it...

cko2 said:
well aint a mobile phone made for putting in the pocket? this is not my first phone and i never had such a problem even with a touchscreen phone. its not like i did sit on it with full force or something.. just had it in back pocket during cardriving. you can easy do that with any other phone without breaking it...
Click to expand...
Click to collapse
that's exactly what's it's not - it's a pda phone and it kind of makes sense to treat it differently from normal mobiles which can withstand all sorts of abuse. also if they ask you specifically not to do something because it can damage the device - and you do it and then you are surprised it happened. it's written there for a reason. they surely know that for many people it will be their first pda phone so they don't have much clue how to treat it...

HOW TO: fix Droid/Milestone touchscreen lack of responsiveness and Ghost Touch issues

NOTE: THIS SOLUTION IS POTENTIALLY DAMAGING AND MAY NOT WORK FOR EVERYONE
PROBLEM: touch screen acts erratic, notification bar keeps opening, screen appears to be touched by someone else continuously (Ghost Touch), and parts of the screen DO NOT RESPOND TO TOUCH.
MY OWN SPECIFIC CASE: I had the Ghost Touch issue for 3 days suddenly without intro, which often used to go away after a reboot or two, then phone worked normally after I removed the battery and left it in a dry area (in a closed drawer between books, no air entering, very dry atmosphere), however the RIGHT SIDE of the screen (Search button, rightmost letters [L and Delete and sometimes ENTER] do not work. If the phone is in normal landscape, you cannot open the notification bar by dragging it normally.
DIAGNOSIS: for some people, the problem is more severe. The Digitiser itself could be malfunctioning and has to be fixed, while for others it could be a true problem with the screen itself. However, for MANY OF US, it is a problem of HUMIDITY. The humidity sensors are causing the phone to act like that. Some say part of this problem happens because the way the keypad affects the phone internally as you open and close it a lot.
SOLUTIONS:
1- To be safe: send the phone to the shop. Ask them to open the phone and apply an extra layer of insulation, in case the digitiser and the screen are okay.
2- If something is faulty, replace it at the shop.
3- MY OWN SOLUTION: based on something I read many times, the solution was to apply DRY HEAT for at least 45 mins. What I did, based on averaging out many experiences I read online, was to remove the SD Card and SIM, remove battery, I heated up a toaster oven for 10 minutes, waited until the temperature was at about 60-70 degrees Celsius, SHUT DOWN THE HEAT, put the phone on its screen on a plate, screen facing down and covered by a cloth to protect it from direct contact with metal, then all inside the oven. The oven is a relatively big one, so phone was AWAY FROM A SOURCE OF DIRECT HEAT. I closed the lid, then every while 15 minutes I would heat the oven for 40 seconds to maintain the temp. This is LIKE (ALTERNATIVE SOLUTION) leaving your phone in the glove compartment of your car while its parked in a sunny spot, to find it really hot in the morning and tough to touch for a while. TO CONTINUE, after the phone was out of the oven (I can't believe I am saying this), I left the phone overnight in a dry area for 8 hours (could need less time). Then, I put everything back in, plugged it, and THE PHONE IS WORKING PERFECTLY NOW!
NOTE that solution number 3 could affect your keyboard buttons if heat is too much. It may cause the glue holding the keys to melt a bit. Be delicate with your keyboard after you restore your phone.
Again, I only did this YESTERDAY. With the exception of some keypad stickiness, the phone is working perfectly now.
I hope this was useful
B.
EDIT: Today is the First of May, phone is still working without a glitch
N.B. Press the Thank you button if you wanna congratulate me on daring to toast my milestone in the name of scientific inquiry
SECOND EDIT: Phone did it again for 2 days. Applied the same method, and it worked again. I think partially it happened because I was in a very humid location.

That didn't work for me, I had no option but to replace the touchscreen/gorila glass.

I love the idea of toasting a milestone
Thought with all my aggression against Moto, I think I just might leave it in there
Luckily I dont have these problems so I wont get tempted

AirLancer said:
I love the idea of toasting a milestone
Thought with all my aggression against Moto, I think I just might leave it in there
Luckily I dont have these problems so I wont get tempted
Click to expand...
Click to collapse
I have to admit, I cared litte whether or not this actually worked. I just wanted to toast it But it did work, so

Pretty tempted to try this out, I think I will when I have free time.
My phone had the dead zone problem for 2 months now, but in some very rare cases, like when it's a very hot day, the screen will work normally for a minute or something. Then it goes back to dead part. I assume this would fix it?

Lesiroth said:
Pretty tempted to try this out, I think I will when I have free time.
My phone had the dead zone problem for 2 months now, but in some very rare cases, like when it's a very hot day, the screen will work normally for a minute or something. Then it goes back to dead part. I assume this would fix it?
Click to expand...
Click to collapse
If it DOES indeed work on hot days, then it means the phone is not entirely dead. But I would suggest you do something less drastic first, such as the Glove Compartment method. No responsibility though

If you're trying to remove moisture, you could also try putting it in a baggie of crystaline cat litter (NOT the clay kind!) - this stuff is sold at a MUCH higher price as a way to save a phone from water damage, but it's the exact same substance. Does a great job removing moisture. It's the same sort of silica gel that's in those packets in medicine/vitamins that says "Dessicant - do not eat".

Or you could just put it in a sealed bowl with raw rice for a couple of days... this is the best and cheapest way (and then you have the silicon "grains", the ones that you find in shoe boxes or computer parts boxes).
Sent from my Milestone using Tapatalk

CybeRNerO said:
Or you could just put it in a sealed bowl with raw rice for a couple of days... this is the best and cheapest way (and then you have the silicon "grains", the ones that you find in shoe boxes or computer parts boxes).
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Pretty sure that rice doesn't do anything, I don't know how that started as a suggestion, but its not better than anything else; its not known to be absorbant, but the silicon is.

I've tried the method but the right segment of the digitizer still doesn't work.

My biggest issue with regards to "lack of responsiveness" are the 4 capacitive buttons. Pressing the Home key is always hit and miss. I know I hit it all the time because I can feel the vibration feedback but it only goes to homescreen 50% of the time.

Will also be testing this out as soon as I have the spare time. My screen started acting up after I accidentally put my milestone in a small beer spill at a party Hopefully this will work out for me too!

Abazel said:
I've tried the method but the right segment of the digitizer still doesn't work.
Click to expand...
Click to collapse
Luckily for me, I was still under warranty, heh. Cause I had insurance. This is my second Droid this has happened to. Hopefully my replacement won't do the same thing.

How many times did you reheat the oven? I tried just once and it didn't help. My phone has been having this problem since January.

decon89 said:
How many times did you reheat the oven? I tried just once and it didn't help. My phone has been having this problem since January.
Click to expand...
Click to collapse
I feel I am on a cooking show
Well, depends on your over. Mainly I was trying to maintain a temp varying between 50-60 c. Mostly 50, but sometimes 60 to up the ante a bit and make sure things stay warm. 30 minutes at least. However, I have to say that I did this twice in 6 weeks, and after that the phone just died again, and I found my warranty card and sent it there to be fixed, and they fixed it, but ruined something else.
If you have the warranty card, take your phone and send it to them Someone told me the method worked and the phone has been good for quite a while, but most of us seem to re-experience the issue after a while.

I've been having these issues for a few days now too, and I think I know why. I've been using this Milestone for 4 months now, and I never had this problem until a few days ago. What I noticed yesterday was that after some acting up, the phone started working properly again. So I ran Touch Test. And I noticed that if I pressed really hard on the top side of the phone(where the logo and the ear piece are located) it started acting up again. My first impression was that the glue holding down the gorilla glass was loose. So I left the phone as usual on my night stand and then I tried the same thing with the pressing on the same area. Guess what? It didn't happen again. Now there seems to be no problem. So I tried to remember what happened yesterday before the screen started acting up, and I remember talking to my wife for a while when I was in my car. Yesterday was a pretty hot day and I was a little sweaty when I talked to her. Now since only that specific part with the earpiece was causing this issue(I tried pressing equally hard on other areas without any problem my guess is that the insulation between the earpiece and the touchscreen has been breached. Maybe because of all the sweat that went in there in time. You know the salt and acids in the swear are known to melt things, and poor quality glue is among them.
How to fix this? I do not know yet, but I do have a good idea that I'd like to share. I want to buy a screen protector foil, and put just a little band around the ear piece. That would probably lower my in-call volume, but since the Milestone is very loud anyway I hope it the quality of the calls won't be too much affected. After that I'll use it in normal conditions again and see if the ghosting happens again.

try completely formatting your SD CARD/PARTITION.
& then reinstalling using (FAT 32/EXT 2, 3, or 4)
sometimes traces from the previous ROM might interfare with touch codecs (maybe)
just trying to help. had similar issue & this is what i did.

bandroid842 said:
NOTE: THIS SOLUTION IS POTENTIALLY DAMAGING AND MAY NOT WORK FOR EVERYONE
PROBLEM: touch screen acts erratic, notification bar keeps opening, screen appears to be touched by someone else continuously (Ghost Touch), and parts of the screen DO NOT RESPOND TO TOUCH.
MY OWN SPECIFIC CASE: I had the Ghost Touch issue for 3 days suddenly without intro, which often used to go away after a reboot or two, then phone worked normally after I removed the battery and left it in a dry area (in a closed drawer between books, no air entering, very dry atmosphere), however the RIGHT SIDE of the screen (Search button, rightmost letters [L and Delete and sometimes ENTER] do not work. If the phone is in normal landscape, you cannot open the notification bar by dragging it normally.
DIAGNOSIS: for some people, the problem is more severe. The Digitiser itself could be malfunctioning and has to be fixed, while for others it could be a true problem with the screen itself. However, for MANY OF US, it is a problem of HUMIDITY. The humidity sensors are causing the phone to act like that. Some say part of this problem happens because the way the keypad affects the phone internally as you open and close it a lot.
SOLUTIONS:
1- To be safe: send the phone to the shop. Ask them to open the phone and apply an extra layer of insulation, in case the digitiser and the screen are okay.
2- If something is faulty, replace it at the shop.
3- MY OWN SOLUTION: based on something I read many times, the solution was to apply DRY HEAT for at least 45 mins. What I did, based on averaging out many experiences I read online, was to remove the SD Card and SIM, remove battery, I heated up a toaster oven for 10 minutes, waited until the temperature was at about 60-70 degrees Celsius, SHUT DOWN THE HEAT, put the phone on its screen on a plate, screen facing down and covered by a cloth to protect it from direct contact with metal, then all inside the oven. The oven is a relatively big one, so phone was AWAY FROM A SOURCE OF DIRECT HEAT. I closed the lid, then every while 15 minutes I would heat the oven for 40 seconds to maintain the temp. This is LIKE (ALTERNATIVE SOLUTION) leaving your phone in the glove compartment of your car while its parked in a sunny spot, to find it really hot in the morning and tough to touch for a while. TO CONTINUE, after the phone was out of the oven (I can't believe I am saying this), I left the phone overnight in a dry area for 8 hours (could need less time). Then, I put everything back in, plugged it, and THE PHONE IS WORKING PERFECTLY NOW!
NOTE that solution number 3 could affect your keyboard buttons if heat is too much. It may cause the glue holding the keys to melt a bit. Be delicate with your keyboard after you restore your phone.
Again, I only did this YESTERDAY. With the exception of some keypad stickiness, the phone is working perfectly now.
I hope this was useful
B.
EDIT: Today is the First of May, phone is still working without a glitch
N.B. Press the Thank you button if you wanna congratulate me on daring to toast my milestone in the name of scientific inquiry
SECOND EDIT: Phone did it again for 2 days. Applied the same method, and it worked again. I think partially it happened because I was in a very humid location.
Click to expand...
Click to collapse
Thank you for that Solution.
It fixed the Issue of my friends MS without other problems

I'll have to try and the oven methode again. My phone has started to really act up again.
I've tried to install new roms, wipe ect. and it doesn't help with the screen.
Have anyone tried to replace the digiziter? They are pretty cheap on ebay

My milestone started freaking out just an hour ago. No more warranty here but I'm not brave enough to do the oven method. Had anybody tried the Rice alternative?

[POOL] About the touchscreen problem

I only discovered the touchscreen issue yesterday doing the test of the other thread. So, i would like to every z1 owner to answer this pool to know how bad things are and if we can try to find a solution, since i think Sony won't.
So, please answer the poll and post any useful information. I'll start.
My phone model is C6943, I currently don't use case and I'm using a screen protection. I can do the xperia touchscreen test without touching the phone body without problem and also doesn't have problem with pattern password.

ffp. said:
I only discovered the touchscreen issue yesterday doing the test of the other thread. So, i would like to every z1 owner to answer this pool to know how bad things are and if we can try to find a solution, since i think Sony won't.
So, please answer the pool and post any useful information. I'll start.
My phone model is C6943, I currently don't use case and I'm using a screen protection. I can do the xperia touchscreen test without touching the phone body without problem and also doesn't have problem with pattern password.
Click to expand...
Click to collapse
Pool? I think you mean "poll"
My 6902 is completely screwed. At first I used a screen protector and the problem wasn't too bad. Then I removed it when I took the phone in to get another issue fixed and soon after that the problem got very bad. I was traveling so couldn't go back to the service center. Now it's a bit better, randomly works and randomly doesn't. When I was home in cold weather though it seemed a lot worse than it is now that I'm back in India where it's warm. Not sure if temperature is a factor, or could be conscience. But a few weeks ago it was so bad you couldn't type even a two letter word using Swype.
Also, I now have a part of my screen in the form of a horizontal line where touch doesn't work at all. No single touch and no drag. Completely dead. Taking it to the service center soon.

You should vote on the first option, then

Guys, check my post "News from whats is causing touch screen problem" to see if is your case!

ghostman2 said:
Guys, check my post "News from whats is causing touch screen problem" to see if is your case!
Click to expand...
Click to collapse
It's not.
I got problem unlocking with patterns, scrolling pages and when I play some games after few minutes it stop working so I voted the first option. My phone is back to Sony, I hope they know what to do and at last it's Made in China.

Please, post if you use case and screen protections too. This could help understanding the problem.

Additional data : Z1 is being handled in a leather case, back and screen protector removed ( not the one with the logo, the plastic ones that makes your camera blurry )
Touchscreen problem seen in the game Alien Shooter, after some playing, the touch screen becomes less and less responsive ( i tap a button to shoot and use some onscreen joystick to move ) - both become unresponsive/less responsive as you play and the phone gathers some heat ( you can feel the touchscreen becoming hotter )

i have a simple tpu case, i had a bit of problem when playing all touch-based games (not ones with gyro like asphalt).
ever since i got the case it's better, i have the ASF and nillkin matte screen protector

ffp. said:
Please, post if you use case and screen protections too. This could help understanding the problem.
Click to expand...
Click to collapse
I did not use any case just a chip screen protector. Anyway on a good healthy touch screen the screen protector should not influence the touch screen respond.

Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)

Vippo321 said:
Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)
Click to expand...
Click to collapse
For me the warranty worked perfectly, i changed the phone 3 times until get a working one, i called Sony, discribed my problem and they changed for me, only 2 days for the change. BUT i recorded the problem and sent to them, so they accept the change.

Vippo321 said:
Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)
Click to expand...
Click to collapse
Same here. I sent my phone back last week to the store where I bought it 2 months ago. They will send the phone to Sony Center but the time for repair or replace the device will not be 2 or 3 days but from 2 weeks to no eta. When the phone will come back to the store they will send the phone to me. I will post if the problem persist or not.

The problem is if they return a phone with the same problem.

ffp. said:
The problem is if they return a phone with the same problem.
Click to expand...
Click to collapse
They should be aware about this issue even on the new device so at this time they probably will check that but if they return a phone with the same problem, I will send it back again like many did. Someone had to replace the phone 3 times and I will do the same.

IYeah, you will be a long time without your phone though. I think I'll wait a bit since i rarely get the error and actually only when i try to reproduce it. How bad was yours?

ffp. said:
IYeah, you will be a long time without your phone though.
Click to expand...
Click to collapse
What I can do, I want a fully working Z1, I paid for it.
ffp. said:
I think I'll wait a bit since i rarely get the error and actually only when i try to reproduce it. How bad was yours?
Click to expand...
Click to collapse
I was able to reproduce the problem in many ways, Touch Screen Test, Opening the phone with Patterns, Scrolling Pages or with Launcher instead of switch the page it was opening the applications and at last when I was gaming at one point the touch stopped working and I had to wait, so this made my mind to send it back. On daily use was all ok but in some circumstances was frustrating.

i had the problem with cm11. and when I retored to stock then the problem was gone:S

I'm on stock and I got the problem.
Today for the first time I got the problem when writing on handrite. So I thought about using my phone warranty to get anotehr one. But it don't always fails when i do the method to reproduce it. So, how do you test if your new phone is working and how do you prove that it isn't? I mean what if i take the phone to warranty and it works?
And for you who already changed phone, it is working?

ffp said:
'm on stock and I got the problem.
Today for the first time I got the problem when writing on handrite. So I thought about using my phone warranty to get anotehr one. But it don't always fails when i do the method to reproduce it. So, how do you test if your new phone is working and how do you prove that it isn't? I mean what if i take the phone to warranty and it works?
And for you who already changed phone, it is working?
Click to expand...
Click to collapse
For me after the 3rd change is working now, here is what i did: i recorded the error and send it togheter with the phone. They saw the video and changed imediately.
Sent from my C6943 using xda app-developers app

Did youu made the method to reproduce and it didn't failed? For how long do you have the 3rd phone?

Auto Rotate not working

Hey guys I have a problem, today my nexus 6 slipped from my pants and felt screen down to the floor.. It has now a few scratches on one corner but nothing more physically speaking.. But now I have noticed that the auto rotate option is not working anymore.. Camera, photos, videos, web pages, etc nothing works.. Just YouTube but because it has its own option to see on landscape.. I have re started the phone 3 times and nothing.. I don't know if someone can help me this, if I have to install the firmware or make a factory reset or something.. I don't know.. My model is XT1103 bought from Motorola Mexico directly from their web page and I use it with Telcel.. I haven't had this issue before.. All started today and I'm guessing is because of the fall of the phone.

If this all happened after you dropped your phone I would assume its more of a mechanical issue (busted accelerometer) vs a software issue. I would doubt that any sort of reset or software tweak could fix a problem like that. It may benecessary to contact Motorola and set up a repair order.

rubennd said:
Hey guys I have a problem, today my nexus 6 slipped from my pants and felt screen down to the floor.. It has now a few scratches on one corner but nothing more physically speaking.. But now I have noticed that the auto rotate option is not working anymore.. Camera, photos, videos, web pages, etc nothing works.. Just YouTube but because it has its own option to see on landscape.. I have re started the phone 3 times and nothing.. I don't know if someone can help me this, if I have to install the firmware or make a factory reset or something.. I don't know.. My model is XT1103 bought from Motorola Mexico directly from their web page and I use it with Telcel.. I haven't had this issue before.. All started today and I'm guessing is because of the fall of the phone.
Click to expand...
Click to collapse
The same thing happened to me when my son dropped it on the floor. After looking around the web, I have found that it is a common issue with the owners of this device where it seems that the accelerometer gets shaken a bit out of place. You can download an application from the Play Store called Accelerometer Monitor which will show you the X, Y and Z value changes as you move the phone around. In my case, all the values where changing except for the Y value.
I know that this is not a scientific way of doing things, but what almost everybody recommended is smashing the back of the device hard on your hand many times in order to push the accelermoter back to its place. I have done this while I had the above application opened and after many trials the Y value started changing again and everything seemed to be back in place and working perfectly.
Good luck!

Ok so I downloaded the application you said, and in fact the Y value is the only one that doesn't change when moving the phone.. I guess I'll try the same of smashing the back oh the phone hard with the hand to see if that helps me.. Its driving me crazy that I cannot rotate the screen to landscape..

Good luck then! I know the feeling!

fixed
I know it's an old post but it just helped me fix the accelerometer. It got stuck on Y axis when I dropped the phone today on a carpet.
I installed the recommended app to monitor the settings and bumped the phone several times at the palm of my hand and magically the Y axis started responding.
Thank you for this post.

Wow this actually worked.
Thanks !! I would really hate to call Google and wait days for a refurbished replacement.

Just to let you know - this worked for me as well.
Thanks!

I just wanted to say that this fixed mine too

old post, but just to add a testimony,
no need to drop the phone and risk it.
just smack the phone on your hand, a bit of force is needed but nothing crazy.
i actually did this to the rhythm of a song haha
this works

amazing ... worked exactly as reported...

It worked for me...
oneshotaz said:
The same thing happened to me when my son dropped it on the floor. After looking around the web, I have found that it is a common issue with the owners of this device where it seems that the accelerometer gets shaken a bit out of place. You can download an application from the Play Store called Accelerometer Monitor which will show you the X, Y and Z value changes as you move the phone around. In my case, all the values where changing except for the Y value.
I know that this is not a scientific way of doing things, but what almost everybody recommended is smashing the back of the device hard on your hand many times in order to push the accelermoter back to its place. I have done this while I had the above application opened and after many trials the Y value started changing again and everything seemed to be back in place and working perfectly.
Good luck!
Click to expand...
Click to collapse
Above non-scientific solution worked for me for my Nexus 6 which had got Auto-rotate issue after it was dropped on screen side down.

Pixel 5 multiple sensors and software issues

Hello everyone,
Since a few weeks I have several issues with my Pixel 5, mostly sensors issues (compass, gyroscope, proximity, etc.) but also some weird system software behaviors.
It began mid November when I woke up and realized my phone restarted on its own during the night.
Since then I have these issues :
- Compass not working
- Proximity sensor not working
- Gyroscope working only for a few seconds at start, and then completely stop.
- Phone freezes almost every time I unlock it. It freezes for like 3 to 5 seconds, the colors of the screen are dimmed, and then it finally unlocks.
- When the phone is playing audio content (songs, ring, alarms, etc.) the sound cuts out every 10 seconds (exactly) for like one second and then come back.
- In random moments, the phone will display an error "Process is not responding".
- The small proximity sensor LED is always blinking if I enable "Always on Display" feature.
- Finally, I can't install any Google Play System updates. I perform the installation, reboot the device, but a few minutes after this restart the phone will restart on its own and the Google Play System update will not be not applied (I can perform it again, and again, and again, etc.)
I tried several things : safe mode, factory reset, but I also reinstalled the whole Android 13 image with adb and fastboot. The issues still continue.
I sent the phone to be repaired by Google but they were "unable to reproduce these issues".
They also told me the phone has been damaged by water, which seems weird because the phone didn't had any incident with water that I can remember. I think I had one time the message "Liquid or debris in USB port" about six months ago, I don't understand why the problems would suddenly appear now.
They sent it back without any repair.
I don't know what to try anymore, I was convinced it was only a software issue (and that all the issues were related) but even reinstalling the whole android image didn't solve it. So is it a hardware issue after all ?
Any recommendation on how to process with these issues would be much appreciated. Or maybe I need to give up and buy a new phone ?
Thank you.

It's either water damaged or it's not. Google saw the moisture sensitive indicator(s) showed water exposure. So somehow this happened. If it's been exposed to water the first thing to do is disconnect the battery and allow it to dry out completely then see what you got.
At this late stage the damage may be permanent.
If it was salt water it's already dead. Sweat is salt water... keep 'em in a good case and keep it clean.

blackhawk said:
It's either water damaged or it's not. Google saw the moisture sensitive indicator(s) showed water exposure. So somehow this happened. If it's been exposed to water the first thing to do is disconnect the battery and allow it to dry out completely then see what you got.
At this late stage the damage may be permanent.
If it was salt water it's already dead. Sweat is salt water... keep 'em in a good case and keep it clean.
Click to expand...
Click to collapse
Thank you for your response.
But what I don't understand is why the issues would suddenly appear months after its contact with water, which was only rain by the way.
I am 100% sure it did not had any water incident at the time the issues appeared.

Water damage is insidious which is why manufacturers won't warranty it. Damage can be delayed sometimes taking weeks or months to become apparent.

buying used P5 now due to water damage :-(
Almost went for P7, great device, but I think I'll be fine until the P8 and hopeful Google will have a good trade in value like this year.
$200 for mint P5
$540 + shipping taces etc I believe if you have one od those.
but I think I'll save the $300 for now.. If i had the cash I'd go P7, but P5 is a wonderful device,