Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
The Marionette said:
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
Click to expand...
Click to collapse
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Tell us how it works out [emoji846]
Skickat från min MI 8 via Tapatalk
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Been wanting to get the 8 se, but I've been waiting to hear if phh-treble and other GSIs work before buying. other than notch problems are there any other major issues? Once P is released and phh-treble is updated to android 9 the notch won't be a problem anymore due to AOSP notch support.
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Can you point me to a guide to run Lineage os or RR on out SE?
I am familiar in flashing custom for many years but i am new to treble and just heard about it.
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Ydraulikos said:
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Click to expand...
Click to collapse
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
marcel112 said:
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
Click to expand...
Click to collapse
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Ydraulikos said:
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Click to expand...
Click to collapse
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
marcel112 said:
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
Click to expand...
Click to collapse
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Does the system detect the notch on lineage?
Ydraulikos said:
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Click to expand...
Click to collapse
i did full wipe,
after that i tried to install image, but as what do i need to flash this?
system image
boot
recovery
vendor image
firmware
persist
splash
logo
etc etc?
i choose system image, but after flash ( was quick ) i get no OS?
edit: so i can flash anyone off this page, as long as i use arm64 Aonly for my Mi 8 SE?
edit 2: got it..
install is real fast, and phone is very quick
after trying treble...
i tried to go back to miui backup..
It boots fine, but i cant get past pin code?
I know 100% its the right code, does it have to do with trying treble?
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
jectsin said:
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
Click to expand...
Click to collapse
Everything works on RR? How is the camera?
_katho_ said:
Everything works on RR? How is the camera?
Click to expand...
Click to collapse
work. but bad quality
jectsin said:
work. but bad quality
Click to expand...
Click to collapse
yes and notch is not detected for me
marcel112 said:
yes and notch is not detected for me
Click to expand...
Click to collapse
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
The Marionette said:
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
Click to expand...
Click to collapse
i know this is not miui forum, but i made twrp backup..
Why cant i unlock after restoring after flashing Treble based roms ?
I tried yesterday 3 trebles and full wiped, and restored nandroid of miui 10.
All looks good, but after boot up, i cant get past pincode( i know its right code 110% )
Here is the collection of different custom ROMs I have found in the internet
Resurrection Remix
RR-P-v7.0.2-20191016-RMX1921-Unofficial.zip
Havoc OS
Havoc-OS-v2.9-20191027-RMX1921-BETA.zip
Pixel Experience
20191016
PixelExperience_RMX1921-9.0-20191026-1050-BETA.zip
20191115
PixelExperience_Plus_RMX1921-9.0-20191115-1424-UNOFFICIAL.zip
Above all ROMs are developed by Bombsquad
and these files are hosted in AFH
Source Bombsquad & AFH
Lineage OS
[ROM][RMX1921][9.0.0][UNOFFICIAL] LineageOS 16.0
Above ROM is developed by thesprintster
Source thesprintster & XDA
Flashing Instructions
Download the latest build
Reboot to recovery
Make sure you're using stock unmodified vendor.
Wipe data, cache, system ( Don't wipe vendor )
Flash the latest build and GApps
Reboot
These are unofficial & beta ROMs and contain bugs So please be careful to backup your data before flashing these ROMs.
Please do help the developers by sending the logcats and informing about the bugs you face.
These are ROMs are not mine and are developed by respective developers as mentioned above.
Screenshots please
boot loader should be unlocked for this which is risky
gou225 said:
boot loader should be unlocked for this which is risky
Click to expand...
Click to collapse
if you want the custom rom installed unlocking the bootloader is must and if u follow the steps properly and correctly there is no risk involved
Latest update of Pixel Experience
Latest update of Pixel Experience
PixelExperience_Plus_RMX1921-9.0-20191115-1424-UNOFFICIAL.zip
I have installed Corvus GSI and have encountered the same problem which I was encountering when using PE GSI. After some time using the phone it starts to close apps while I use them. When I list stories on Instagram my phone is closing the app after a few stories are listed. Same for telegram/Gcam. Did anybody has encountered this already and can help me, please?
Redmi Note 5G, Corvus OS GSI. As I said, the same problem with PE GSI before.
whats your stock miui rom? these rom have a lot of customizations, maybe this could cause bugs. ask into official telegram group. and is higly reccomended flash alk latest a12 gsi roms starting from a clear miui13 installation
what version of gsi u flashed? vndk? vndklite? gapps? vanilla?
wetito said:
whats your stock miui rom? these rom have a lot of customizations, maybe this could cause bugs. ask into official telegram group. and is higly reccomended flash alk latest a12 gsi roms starting from a clear miui13 installation
what version of gsi u flashed? vndk? vndklite? gapps? vanilla?
Click to expand...
Click to collapse
Gapps one, but as I said I have encountered the same problem after I flashed PE GSI before. So ROM's different, but problem is still the same.
try different gapps, vndk version and try first pphussons gsi. before flash gsi make a miui13 stock clean install
Can a Google GSI work on this device it will it result in a brick or other problems. If I can which version do I use can I just use android 12 Arm64? Supposedly if you use android 13 all of the colors are wrong.
Yes, any GSI should work fine. Make sure you don't wipe /boot and only install the GSI to /system.
You can use any ARM64 version. See this thread for more details on AOSP/Google Developer Preview GSIs.