All
I have the dreaded usb connected usb disconnected notifications on off on off fault on my phone.
I tried to clean the usb = no luck no water or fluff in there
I tried to clear cache on usb settings and rest start - no luck
I tried rice in a bowl - no luck
I tried to factory reset no joy
But what works and saves battery drain is the following
Install the pixel experience custom ROM or and pixel custom ROM, lineage worked for a bit but then I got the notifications again.
The issue is still on the phone when you look at usb setting but your phones battery won't drain and you can turn your phone screen off and it won't turn on again all the time with the notification.
Also if it says usb connected just restart your phone and it goes away.
I thought I would share this if anyone else has had this error and didn't want to upgrade just yet use the above temp fix to buy you some time.
Please see posts on here to install a custom pixel experience ROM for your phone.
Please let me know if this works for you and comments below.
I'm now on android 13 but it worked with 12 as well.
Hope this helps
Hello majordj, you are talking about the pixelblaster rom under android13, it must come from the rom.
As according to some discussions that I saw the S10 will not be updated android 13, if you have installed the romp pixel blaster under android 13 ask whoever develops it if it is compatible with S10 exynos or not.
No I'm taking about I had a issues with my S10+ where it kept says in the notification usb connected then disconnect and the screen wouldn't go off plus a cable wasn't pluged in. I was on the original stock ROM, as a last try to fix it I flashed the pixel experience ROM and it works and you can carry on as before
Related
Hey guys.
I have the famous USB port problem, in which, even after disconnecting the charger, the phone shows charging, and dis-charging in an infinite loop. So due to this, the screen doesn't switch off because, due to this problem, the phone thinks that the charger is being connected and removed, connected removed .. so on. and hence, the phone sometimes acts like a heater, and also oozes battery. Just like is in the starting of this video here: http://www.youtube.com/watch?v=duzTDyt_bN4
As a solution to this problem, I switched to MIUI (the Venegence MIUI 5), which recognized the small intervals of charging and disconnecting as just charging, and hence didn't keep the screen on. But there was a problem. the MIUI got bloated, (and also i got pretty bored using it). so i had to swith to official JB again. And again the same problem continued.
If MIUI doesn't recognize the small connect and disconnect, why does the TW JB? and is there any tweak that can be applied on the stock JB rom, to not light up the screen when charger is connected? i think that the phone keeps the screen on because it thinks that it has been connected -> 'turn screen' on and disconnected -> 'turn screen on' and connected -> 'turn screen on' again. If it is said to the phone, don't turn on the screen when connected or disconnected, then i think the problem is solved. then there is no other problem on the phone like the others have. - pc not recognizing, connect disconnect sound or anything. everything else concerning the USB port is working fantastic. just this screen on thing.
heartreaper said:
Hey guys.
I have the famous USB port problem, in which, even after disconnecting the charger, the phone shows charging, and dis-charging in an infinite loop. So due to this, the screen doesn't switch off because, due to this problem, the phone thinks that the charger is being connected and removed, connected removed .. so on. and hence, the phone sometimes acts like a heater, and also oozes battery. Just like is in the starting of this video here: http://www.youtube.com/watch?v=duzTDyt_bN4
As a solution to this problem, I switched to MIUI (the Venegence MIUI 5), which recognized the small intervals of charging and disconnecting as just charging, and hence didn't keep the screen on. But there was a problem. the MIUI got bloated, (and also i got pretty bored using it). so i had to swith to official JB again. And again the same problem continued.
If MIUI doesn't recognize the small connect and disconnect, why does the TW JB? and is there any tweak that can be applied on the stock JB rom, to not light up the screen when charger is connected? i think that the phone keeps the screen on because it thinks that it has been connected -> 'turn screen' on and disconnected -> 'turn screen on' and connected -> 'turn screen on' again. If it is said to the phone, don't turn on the screen when connected or disconnected, then i think the problem is solved. then there is no other problem on the phone like the others have. - pc not recognizing, connect disconnect sound or anything. everything else concerning the USB port is working fantastic. just this screen on thing.
Click to expand...
Click to collapse
It's Note's weak spot. I had the same problem and it's obviously not rom related. I fixed it by replacing the usb port. It's a couple of bucks on ebay and there are YouTube guides on how to do it.
http://item.mobileweb.ebay.co.uk/viewitem?sbk=1&nav=SEARCH&itemId=400461086932
Mine came with the tools necessary.
http://m.youtube.com/results?q=galaxy note usb port replacement&sm=1
heartreaper said:
Hey guys.
I have the famous USB port problem, in which, even after disconnecting the charger, the phone shows charging, and dis-charging in an infinite loop. So due to this, the screen doesn't switch off because, due to this problem, the phone thinks that the charger is being connected and removed, connected removed .. so on. and hence, the phone sometimes acts like a heater, and also oozes battery. Just like is in the starting of this video here: http://www.youtube.com/watch?v=duzTDyt_bN4
As a solution to this problem, I switched to MIUI (the Venegence MIUI 5), which recognized the small intervals of charging and disconnecting as just charging, and hence didn't keep the screen on. But there was a problem. the MIUI got bloated, (and also i got pretty bored using it). so i had to swith to official JB again. And again the same problem continued.
If MIUI doesn't recognize the small connect and disconnect, why does the TW JB? and is there any tweak that can be applied on the stock JB rom, to not light up the screen when charger is connected? i think that the phone keeps the screen on because it thinks that it has been connected -> 'turn screen' on and disconnected -> 'turn screen on' and connected -> 'turn screen on' again. If it is said to the phone, don't turn on the screen when connected or disconnected, then i think the problem is solved. then there is no other problem on the phone like the others have. - pc not recognizing, connect disconnect sound or anything. everything else concerning the USB port is working fantastic. just this screen on thing.
Click to expand...
Click to collapse
there is xposed module which includes the option for wake up on plug. Gravity box has it, there should be another module too with that feature. Also in Omnirom it is already included in settings>display>wakeup on plug if you uncheck it, it wont wake up on plug and unplug.
treacherous_hawk said:
there is xposed module which includes the option for wake up on plug. Gravity box has it, there should be another module too with that feature.
Click to expand...
Click to collapse
Can you guide me how to do this? any links or stuff? i found this on xda, but i doubt it works for note with stock JB. http://forum.xda-developers.com/showthread.php?t=2316070
I am thinking of installing the omnirom. the install instruction says:
- Make sure you're running a proper working ClockworkMod-Recovery - WITH SELINUX SUPPORT!
Click to expand...
Click to collapse
Does the HelloWorld kernel's CWM support Selinux? if not, where can i find and flash one?
heartreaper said:
Can you guide me how to do this? any links or stuff? i found this on xda, but i doubt it works for note with stock JB. http://forum.xda-developers.com/showthread.php?t=2316070
I am thinking of installing the omnirom. the install instruction says:
Does the HelloWorld kernel's CWM support Selinux? if not, where can i find and flash one?
Click to expand...
Click to collapse
You dont need nothing of these things, you only need your phone rooted and ICS or + (even kitkat supports Xposed modules).
galaxynote2 said:
You dont need nothing of these things, you only need your phone rooted and ICS or + (even kitkat supports Xposed modules).
Click to expand...
Click to collapse
But the http://forum.xda-developers.com/showthread.php?t=2316070 says (and that too in red) that it is not for the TW roms. Can you confirm? Can you provide with some instructions or link which i should follow for installing Xposed module on the stock TW JB roms? I currently have TW JB + HelloWorld kernel.
treacherous_hawk said:
there is xposed module which includes the option for wake up on plug. Gravity box has it, there should be another module too with that feature. Also in Omnirom it is already included in settings>display>wakeup on plug if you uncheck it, it wont wake up on plug and unplug.
Click to expand...
Click to collapse
I first installed the gravity box, set the don't wake on plug, rebooted, but the screen still turns on. removed gravity box, installed the xposed additions, set the don't wake on plug, rebooted. the screen still turns on, but it vibrates when the display shows charging and not charging. I suppose the Samsung Framework doesn't support don't wake on plug unplug.
can anyone tell me which kernel is required as prerequisite for the omnirom? I am currently on the helloworld kernel. does this kernels CWM has the selinux support?
heartreaper said:
I first installed the gravity box, set the don't wake on plug, rebooted, but the screen still turns on. removed gravity box, installed the xposed additions, set the don't wake on plug, rebooted. the screen still turns on, but it vibrates when the display shows charging and not charging. I suppose the Samsung Framework doesn't support don't wake on plug unplug.
can anyone tell me which kernel is required as prerequisite for the omnirom? I am currently on the helloworld kernel. does this kernels CWM has the selinux support?
Click to expand...
Click to collapse
you can flash raw kernel to flash omnirom.
drkalo said:
It's Note's weak spot. I had the same problem and it's obviously not rom related. I fixed it by replacing the usb port. It's a couple of bucks on ebay and there are YouTube guides on how to do it.
http://item.mobileweb.ebay.co.uk/viewitem?sbk=1&nav=SEARCH&itemId=400461086932
Mine came with the tools necessary.
http://m.youtube.com/results?q=galaxy note usb port replacement&sm=1
Click to expand...
Click to collapse
I have found 2 revisions for the same part. how to know which revision fits inside mine? the date on version 1.0 is 08/2011. i bought my phone in 06/2011. so i think this must not be the rev i need. maybe the 0.0. but does it matter? is it important to know which rev is inside mine? or is the 1.0 backwards compatible, in case i have the 0.0?
heartreaper said:
I have found 2 revisions for the same part. how to know which revision fits inside mine? the date on version 1.0 is 08/2011. i bought my phone in 06/2011. so i think this must not be the rev i need. maybe the 0.0. but does it matter? is it important to know which rev is inside mine? or is the 1.0 backwards compatible, in case i have the 0.0?
Click to expand...
Click to collapse
I didn't find any difference while searching for mine. Just look for n7000 usb charging port replacement.
http://m.ebay.co.uk/sch/i.html?kw=G...d=&sqp=&_trksid=p2056088.m2428.l1312.TR1.TRC0
The second one comes with screwdrivers.
EDIT
Just checked my old usb charging port that I still keep after it has been replaced and it has the following stamp with golden letters:
N7000/I9220_SUB_REV1.0 2011.08.30
I bought my phone May 2012. Not sure if it matters though...
Hope this could be of some help.
Hello, my name is TNSM and i'm new here. I signed up because i can't find anything on the internet that can help me, so i thought maybe someone here may be able to help me.
I have a Samsung Galaxy S3 Mini GT-I8190 and i'm experienced with rooting and flashing custom roms stuff. So, i was looking everywhere for a rom that included the HALO feature and after days of failed research, i found a link on Youtube to download a rom with Halo for my smartphone. I went into the recovery, backed up my current rom, wiped data and performed a factory reset, installed the rom and rebooted the phone... but after i chose the "Reboot" option, the phone never again gave a sign of life. It doesn't turn on, it doesn't show any lights whatsoever, i've tried to charge it overnight, but still nothing, considered buying a USB JIG but didn't work, my cousin says the phone seems like it doesn't even have the bootloader anymore... is my phone more than hard-bricked? Is there a way to wake my phone up again? Just for the record, it has no physical damage, it just seems like it has no software inside, that it's just hardware. By the way, when i connect it to the pc using the usb cable, the pc keeps playing the sound that something was plugged in and that something was plugged out right after, and it loops forever.
I'll give more information about the phone if needed. And i hope someone's able to help me.
- TNSM
TNSM said:
Hello, my name is TNSM and i'm new here. I signed up because i can't find anything on the internet that can help me, so i thought maybe someone here may be able to help me.
I have a Samsung Galaxy S3 Mini GT-I8190 and i'm experienced with rooting and flashing custom roms stuff. So, i was looking everywhere for a rom that included the HALO feature and after days of failed research, i found a link on Youtube to download a rom with Halo for my smartphone. I went into the recovery, backed up my current rom, wiped data and performed a factory reset, installed the rom and rebooted the phone... but after i chose the "Reboot" option, the phone never again gave a sign of life. It doesn't turn on, it doesn't show any lights whatsoever, i've tried to charge it overnight, but still nothing, considered buying a USB JIG but didn't work, my cousin says the phone seems like it doesn't even have the bootloader anymore... is my phone more than hard-bricked? Is there a way to wake my phone up again? Just for the record, it has no physical damage, it just seems like it has no software inside, that it's just hardware. By the way, when i connect it to the pc using the usb cable, the pc keeps playing the sound that something was plugged in and that something was plugged out right after, and it loops forever.
I'll give more information about the phone if needed. And i hope someone's able to help me.
- TNSM
Click to expand...
Click to collapse
You may try to pull off the battery for few mins, then with someone's help hold the 3 buttons for download mode and then plug in the battery...
If you can't turn it in download mode there's no way to fix it, except jtag maybe.
Hello everyone,
Having major issues with my Idol4S. It is the unlocked version (Cricket). It was working just great until a few days ago when I plugged it into the car charger. Phone instantly shut off, and got stuck with a blinking (rapid) LED light. This happens if plugged into my PC, or my Alcatel charger (both the wall and car).
The phone has suffered no damage (had a cover, but it was never dropped or exposed to external weather damage, nor water - I took great care of it), and was working quite well. I'm unable to boot it into any sort of recovery mode (as the screen is black, so I wouldn't be able to see anything anyways). The only indication of life is the flashing LED when plugged in ..(charging loop, maybe?)
I am using my idol4S Win10 (TMO/unlocked) phone in the meantime, but the base model was working just fine before this happened. I was also mindful of checking voltage/Amps when using chargers, so I would not have exposed it to any incorrect input/output. QuickCharge worked great too (sorely missed on Win10 model).
The phone was never rooted so it has the stock ROM, and whatever the last update Alcatel had pushed out for it. I did have developer mode and USB debugging on for MSVC/NSDK.
Is there anything I can do? After awhile being plugged in, the LED shuts off. I kind of need it as I was porting my game engine to it (using the SDK), plus it was my primary. I love the Win10 version too, but the Android idol4S was my primary phone. Kind of disappointed in Alcatel - I read it doesn't have an external battery otherwise I would attempt to transplant the battery (if that is even the issue). . .
Any tips, advice, or suggestions would be greatly appreciated! <3
what you describe is what the phone does when it's plugged into the PC in download mode. Since you have the Cricket version which is also what I have, it is very easy to start from scratch and reflash everything. I have released a newer version TWRP and also have the ~CricketRom~ available if you're interested.
PizzaG said:
what you describe is what the phone does when it's plugged into the PC in download mode. Since you have the Cricket version which is also what I have, it is very easy to start from scratch and reflash everything. I have released a newer version TWRP and also have the ~CricketRom~ available if you're interested.
Click to expand...
Click to collapse
Okay, but would it work even though the phone gives no indication of being plugged in to the computer, or the chargers for it? I plugged it into the PC just now, brief flash of light and then nothing. .
Should mention again that the screen does not turn on, ever since that day, the screen has not came back on -- so I really can't do anything, even accessing 'download mode' does not show anything on-screen, nor does Windows 10 alert me of the USB device being connected.
I wouldn't mind starting from scratch at this point. I'm definitely interested in getting up and running again! It's not like I can do anything else at this point except spend money and get it repaired by TCL.
Would it be rude of me to ask for links to the TWRP/CricketROM from you? Maybe a quick-start guide, I pick up on things easy, but I've never properly flashed with TWRP =)
Also @PizzaG, THANK YOU for your help!! Definitely appreciated <3
Oh! @PizzaG, I also have an older Onetouch Idol 3 that has the _exact_ same symptoms, I wonder if that too could be recovered? ... ^__^
well I guess the first thing to do would be plug it into the PC. Hold volume+ and volume- then hold power until you feel the buzz and let go of power. Hopefully you get the red Download mode screen? I didn't realize it had no life at all, I thought it was just messed up. It's sounding like more may be wrong then just a simple reflash.
New TWRP and ~CriketRom~ Beta5: https://forum.xda-developers.com/idol-4s/development/rom-twrp-recovery-t3792659
Hi, my name is Pablo, I am new and this is my first post.
(I don't have much English, so I'm using the google translator)
I have a problem with charging the xiaomi a2. I bought the cell phone with Android 8.1, what caught my attention is that in the notification bar, the option always came out as if the USB cable was connected and when I connected the charger, I had to lower the bar, open the USB options and select to load (did not start loading without choosing the option)
The biggest problem started when I updated the android and this option in the notification bar did not appear anymore, I connected the charger and did not take it. The only way I would take it was by restarting the cell phone and I knew it was charging (and sometimes it was very slow).
- It is not a problem with the charger because I have already tried several
- It is not a problem with the usb cable because I have also changed it
- It is not a problem with the cell phone connector because in Android 8.1 it always works or (if I restart it in another rom it always takes it)
I have tried changing rom (stock, google experience, havoc, miui) and none was solved (I had to restart the cell phone to start loading)
Please help me to fix it, in android 8.1 the proximity sensor malfunctions and I can't take it anymore
Thank you in advance, I hope I have published in the right place
So here the deal guys , my mi 9t pro is about a 18 months old and recently started to have issues with battery life (long story and since I wasn't personally using it I can't explain the issues very clearly but it was all over the place doesn't charge at times verified the charger was indeed charging another phone , sometimes the phone turn off when the charger is connected so quite a lot of erratic faults and no consistent issue to point out )
I have been trying to look into it for a week now and this is my observations.
So first and foremost the phones does not turn on ,meaning that when just the power button is pressed it is stuck on the boot screen with just mi displayed on the screens and does not change at all even after hours.
I did find a way around it when I send the phone to recovery mode by pressing the volume+ and the power button and then selecting reboot and reboot to system. This way the phone always turns on . How long it remains on is a different matter some times it a few secs while at other times it could up to 10 mins and most of the time if its plugged to a charger and I disconnect the charger it immediately turns off.
Things that I have tried
Firstly, I had suspected the battery but on opening the rear cover realized that the previous battery looks in extremely good shape additionally I connected the new battery but connect the cable and realised that the fault persisted.
Thinking it was a software issue I also tried to flash the latest MIUI version from its official website with no help.
Now I am certain the issue is with the circuit or with the motherboard.
Any previous experiences and how it was fixed could be helpful .I don't mind doing some troubleshooting myself and can arrange for advance tools if required.
In short would appreciate advance level help as I enjoy fixing these things myself.
TL;Dr my phone is behaving quite erratically and having tried the battery and software need help repairing it.
Did it flash without issues? And how did you flash it, which tool? What variant of phone? And what rom version did you flash?
Turbine1991 said:
Did it flash without issues? And how did you flash it, which tool? What variant of phone? And what rom version did you flash?
Click to expand...
Click to collapse
So yes flashing was done without any problems i used the fastboot method of flashing following this guide in its entirety
https://c.mi.com/oc/miuidownload/detail?guide=2
flashing it with the latest rom latest miui rom from the same website