{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
moto z2 force
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 20 thread for the moto z2 force.
Join our moto z2 force Discord!
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
nash - Official builds - Potentially coming soon! - Camera I broken and we are struggling to fix it.
nash - My unofficial with Google Apps/Pixel goodies included. Passes SafetyNet by default. OTA's roll roughly once a month. Support not guaranteed or implied.
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
Camera is buggy/broken at the moment (ugh - working on it but no leads yet)
The EQ Apps for Audio Mods (eg. JBL2 App) won't work, and will crash.
Ultrasonic Proximity Sensor doesn't work -- No support present in the OSS Audio HAL. If it was written in, it wouldn't be used by anything in LineageOS, as the normal proximity sensor works fine.
Audio Mods have no alarm or notification audio through them.
Camera Mods don't (and won't ever) work.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
Official Lineage OS builds for nash ship with full Project Treble compatibility! Flash GSI's to your heart's content after flashing Lineage. Please don't report GSI bugs here, report them instead to the GSI's maker.
Code:
Technical details on our Treble implementation:
Treble is enabled with VNDK30, and VNDK runtime enforcement. VNDK runtime enforcement means that unlike most "ported treble" you'll see, ours is just as it would be from the OEM, and can run GSIs. without need for hacks or additional flashable zips. We relabeled /oem to /vendor (as /oem isn't wasn't used in custom ROMs anyway). To use a GSI, flash official Lineage, then flash your GSI, it's that simple! Flashing a factory image will likely write over /oem and remove the mock vendor image.
Kernel Source: https://github.com/LineageOS/android_kernel_motorola_msm8998
Are all modules not working?
e.g. projection module？
江灵z said:
Are all modules not working?
Click to expand...
Click to collapse
they all work fine.
Hi! I loved the Android 13 version, thanks a lot!
Thank you for Android 13, it's a great news
can you tell me when I have official Lineage 19.1 is it possible to upgrade unofficial Lineage 20 or should wait official build?
When official build will come?
What's your suggestion official is better or unofficial?
What's differences?
AHMN48 said:
Thank you for Android 13, it's a great news
can you tell me when I have official Lineage 19.1 is it possible to upgrade unofficial Lineage 20 or should wait official build?
When official build will come?
What's your suggestion official is better or unofficial?
What's differences?
Click to expand...
Click to collapse
You can't jump back and forth from official to unofficial.
Not sure yet, infrastructure is getting ready.
Not sure, if you want pixel like, use mine, if you want lineage without any changes, use official.
Don't have time to details the diffs.
npjohnson said:
You can't jump back and forth from official to unofficial.
Not sure yet, infrastructure is getting ready.
Not sure, if you want pixel like, use mine, if you want lineage without any changes, use official.
Don't have time to details the diffs.
Click to expand...
Click to collapse
I upgraded from official Lineage 19.1 to unofficial Lineage 20 without any issue
Now my phone working well without any issues,
1. the camera is not working, and IDK
2. SELinux disabled
what should I do?
after more than 1 month there is no answer for me
AHMN48 said:
I upgraded from official Lineage 19.1 to unofficial Lineage 20 without any issue
Now my phone working well without any issues,
1. the camera is not working, and IDK
2. SELinux disabled
what should I do?
Click to expand...
Click to collapse
update to the newest build.
Camera works fine.
SELinux is enforcing.
npjohnson said:
update to the newest build.
Camera works fine.
SELinux is enforcing.
Click to expand...
Click to collapse
I did a clean install
I did go to stock and installed again Lineage 20
still Camera not working!!!!!
when open camera in any app Freeze, then camera busy error, again and again
I'm really sad about it
should I go to Lineage 19 or will you fix it soon?
Maybe change the "OFFICIAL" tag?
lkjsoiuew said:
Maybe change the "OFFICIAL" tag?
Click to expand...
Click to collapse
builds are starting on Dec 31.
npjohnson said:
builds are starting on Dec 31.
Click to expand...
Click to collapse
and I'm waiting for your answer, what should I do?
will you give an update on the Camera problem or I should just back to Lineage 19.1?
AHMN48 said:
and I'm waiting for your answer, what should I do?
will you give an update on the Camera problem or I should just back to Lineage 19.1?
Click to expand...
Click to collapse
No clue man. It seems to work fine here and no one is giving me any logs.
npjohnson said:
No clue man. It seems to work fine here and no one is giving me any logs.
Click to expand...
Click to collapse
Since you told me it's working I installed it several times more, but unfortunately not working
I attached screenshots and screen recordings for you here, check it
Moto Z2 Camera - Google Drive
drive.google.com
AHMN48 said:
Since you told me it's working I installed it several times more, but unfortunately not working
I attached screenshots and screen recordings for you here, check it
Moto Z2 Camera - Google Drive
drive.google.com
Click to expand...
Click to collapse
Screenshots and recordings don't help.
Please get me logs like the wiki details.
npjohnson said:
Screenshots and recordings don't help.
Please get me logs like the wiki details.
Click to expand...
Click to collapse
thank you for your help, I attached logcat.txt as you want it from me
Looks like official Lineage 20.0 came out for some devices, so official builds for nash should start soon.
I upgraded from 18: I sideloaded (after Format data / factory reset) lineage-20.0-20221219-UNOFFICIAL-nash.zip from Lineage Recovery v18. I confirmed that Lineage Recovery is now v20, so I assume this is OK? I couldn't get fastboot to work, but this is probably because I did this in Winblows.
Aside from the aforementioned Camera problems, this works great! With the v18 build, I was unable to power off with my Mophie battery pack attached (phone would reboot unless I removed battery) but this build has fixed that! Thank you for your continued hard work!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dirty Unicorns Semi GSI for Samsung Devices
By CodeFox & OpenSauce9810
I'm no longer maintaining this thread, check the note 9 thread here for latest updates
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimized as much as possible for our Samsung Devices.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
Flash Endurance GSI Kernel in TWRP
Flash BRJ6 Vendor
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
03.12.2018
Initial Release
05.12.2018
Updated sources to 9.0 r21 release. (December Security Patch)
Gapps included, (dialer and messenger also included so you won't start without a phone or sms app)
Bootanimation changed to reduce boot times
Tweaks to ambient play ticker so it clears when you clear media notifications
Further performance tweaks thanks to @malinathani animations transition smoother now.
06.12.2018
PHH Settings Removed.
Dual Speaker permanently integrated, will always persist and no longer needs to be activated.
Enhanced brightness ranges permanently integrated.
Sync latest DU Sources
Potential ratio fix for S9/S9+ Devices.
Screenshots
Video Review Thanks to @vmb265
Click here to view video review
Downloads:
BRJ6 Vendor
System Image GDrive
Endurance Kernel Thread (Use the GSI One)
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated! Donations are always welcome too, I've got electricity bills to pay!
Credits and Thanks
Dirty Unicorns (The best ROM ever)
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani- For the UI Jank Fix (Used widely in other GSI's now)
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
phhusson - thank you for your work on project treble.
XDA:DevDB Information
[sGSI 9.0]Dirty Unicorns[UNOFFICIAL][06.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CodeFox, Rainbow_Dash, malinathani, Ivanmeler, phhusson, Dirty Unicorns
Source Code: https://github.com/DirtyUnicorns/android_manifest
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRJ6 Vendor
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-12-03
Created 2018-12-03
Last Updated 2018-12-29
System image link goes to wrong file?
NisseGurra said:
System image link goes to wrong file?
Click to expand...
Click to collapse
here https://drive.google.com/file/d/1REhuxpQ16VlDepJJKLH1FYMxZ7bwy0S7/view
ot will be updated when hes back
Installs, boots, sim pin ok, but sim menu in settings fc, no network. Kernel, vendor from 1st post
Download link updated. Sorry.
Is nightmode present? couldnt find it on the beta
I've installed it, boots, but no apps in the launcher, just Files, Settings, SIM Toolkit. WTF?
Ronam said:
I've installed it, boots, but no apps in the launcher, just Files, Settings, SIM Toolkit. WTF?
Click to expand...
Click to collapse
You need to install GAPPS 9.0 after rebooting into recovery following install of system image. This should be mentioned in the instructions.
Then you will get the usual install section after boot up and the usual google apps etc. I used GAPPS 9.0 nano.
All working well on my S9+.
Mihalaki said:
You need to install GAPPS 9.0 after rebooting into recovery following install of system image. This should be mentioned in the instructions.
Then you will get the usual install section after boot up and the usual google apps etc. I used GAPPS 9.0 nano.
All working well on my S9+.
Click to expand...
Click to collapse
Thanks, now everything works fine .
Mihalaki said:
You need to install GAPPS 9.0 after rebooting into recovery following install of system image. This should be mentioned in the instructions.
Then you will get the usual install section after boot up and the usual google apps etc. I used GAPPS 9.0 nano.
All working well on my S9+.
Click to expand...
Click to collapse
My bad. It's copy pasta from my PE thread. I'll update it tomorrow. It's a bit of a nightmare I've got so many threads to maintain haha.
Is there any way to use edge screen notifications?
Best rom atm! Perfect to set it up just the way you want it without bloat apps.
Just had to change Product.model to pixel xl in build props to get higher quality on Facebook vids.
Anyways, New daily for me. Thank you. ?
I can't flash the system image . Why is it ending in .xz ?
Its a compressed file, I just used 7zip to extract it.
mackeftw1 said:
Best rom atm! Perfect to set it up just the way you want it without bloat apps.
Just had to change Product.model to pixel xl in build props to get higher quality on Facebook vids.
Anyways, New daily for me. Thank you. ?
Click to expand...
Click to collapse
Is Bluetooth working for you?
which camera you're using on this ROM?
Didn't work for me, had two issues:
-Internal Data not being seen
- No network connection
- Says not to flash gapps, but it is needed as nothing is installed.
For me now, this isn't a usable ROM.
Danish2980 said:
Is Bluetooth working for you?
Click to expand...
Click to collapse
Yes. Using endurance gsi kernel
mackeftw1 said:
Yes. Using endurance gsi kernel
Click to expand...
Click to collapse
nvm
I thought its PE thread
On PE BT wont work with GSI kernel
Fingerprint in 3rd-party-apps
Hello @All,
i installed this good rom on my G965F and everything is working - BIG thx @devs...
I have only one question/issue: With my registered fingerprint i can unlock the screen - this works perfect, but in 3rd-party-apps i get an error with fingerprint and i cant use my fingerprint in these apps (e.g. banking app). Anyone know how to use my fingerprint in 3rd-party-apps? This is not working on all Pie-(s)GSI, not only on DU...
Greetz
Christian
GrapheneOS for Razer 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About GrapheneOS :
GrapheneOS is an open source privacy and security focused mobile OS with Android app compatibility.
GrapheneOS is a privacy / security research and engineering project that has been under way for over 5 years. It recently became rebranded as GrapheneOS and is taking a different direction based on obtaining funding for the research and development work as a non-profit open source project rather than being a company. The reborn project is still in a very early stage and lots of the past work on privacy and security has not yet been restored for the new incarnation of the OS.
The grapheneos.org site is very new and is currently being put together. It will have lots of additional documentation and tutorials in the future along with coverage of various software, firmware and hardware privacy/security topics.
GrapheneOS is being supported with funding and developers from various companies and other organizations interested in contributing to this shared base for a feature rich private and secure mobile operating system able to run many existing applications. It will take more time to organize and deploy these resources in order for the project to have a strong development team with proper infrastructure behind it.
* ONE LAST REMINDER THIS GRAPHENEOS IS NOT RECOMMENDED FOR DAILY USE, IF YOU WANT A AOSP ROM FOR DAILY USE WAIT FOR MY UNOFFICIAL AEX Q and Havoc Pie/Q ROMS CHEERS *
* Why Final Release : This would be A onetime release of this UNOFFICIAL ROM I'll be focusing more in AEX Pie/Q, Pixel Pie/Q and Havoc Pie/Q.*
Download Links :
https://trinitydata.ap.ngrok.io/s/zGFQ7BLQMQ3kdK8 - Download Folder
Flashing Instruction :
ITS VERY HIGHLY RECOMMEND TO USE TRINITYKERNEL! DOWNLOAD IT FIRST AND FLASH IT
Download the latest build of GrapheneOS then use WinRAR to extract it, then copy the .img file to your SDCard or Internal Memory.
Full wipe and factory reset (recommended / backup to make sure not to loose data)
Flash the GrapheneOS from the Recovery(TWRP) Install image.
Download GApps here : https://opengapps.org/
Reboot
Donate via PayPal : (Help me to get A faster machine for compilation Cheers!)
https://forum.xda-developers.com/donatetome.php?u=5160318
About the Build :
Source : https://github.com/GrapheneOS/platform_manifest.git
- op reserve -
- OP RESERVE -
Easter Egg: Upcoming ROM is AEX Q and Havoc Pie/Q
f(x)THaxxorX said:
- OP RESERVE -
Easter Egg: Upcoming ROM is AEX Q and Havoc Pie/Q
Click to expand...
Click to collapse
easteregg???
is that just system.img? really? we have tons of gsi already no thanks
RKBD said:
easteregg???
is that just system.img? really? we have tons of gsi already no thanks
Click to expand...
Click to collapse
AEX Q and HAVOC Q.. Just won't boot on our device.. I'm building them with specific patches to our device.
f(x)THaxxorX said:
AEX Q and HAVOC Q.. Just won't boot on our device.. I'm building them with specific patches to our device.
Click to expand...
Click to collapse
just flash one permissiver.zip and all are booting
RKBD said:
just flash one permissiver.zip and all are booting
Click to expand...
Click to collapse
Tried all of those things.. Like I said it requires specific patches. Other GSI Rom's boot, others won't..
RKBD said:
easteregg???
is that just system.img? really? we have tons of gsi already no thanks
Click to expand...
Click to collapse
So it's not for you .It's for others that need it. And please be a little bit more respectful .
gorast358 said:
So it's not for you .It's for others that need it. And please be a little bit more respectful .
Click to expand...
Click to collapse
that's because we all thought it's finally rom but that's just gsi
f(x)THaxxorX said:
AEX Q and HAVOC Q.. Just won't boot on our device.. I'm building them with specific patches to our device.
Click to expand...
Click to collapse
I don't mean to make this a troubleshooting post, but I think you're talking about expressluke GSIs(or any Q GSI for that matter). If you are, you can try this patch to get it to boot. I do think some patching to fix LTE and some features that don't work would be great as well.
Generic123. said:
I don't mean to make this a troubleshooting post, but I think you're talking about expressluke GSIs(or any Q GSI for that matter). If your are, you can try this patch to get it to boot. I do think some patching to fix LTE and some features that don't work would be great though.
Click to expand...
Click to collapse
What my real plan is to make patch into the GSI Sources before Building it.. Those patches include voLTE fix and other features. Integrate APTX coming from Razer GSI system.img.. and many more..
Nice to see some things to look forward to. Hopefully soon we'll see a stock Q then others will take interest like this guy to come some roms specially geared for RP2.
f(x)THaxxorX said:
What my real plan is to make patch into the GSI Sources before Building it.. Those patches include voLTE fix and other features. Integrate APTX coming from Razer GSI system.img.. and many more..
Click to expand...
Click to collapse
I don't mean to be mean, but I feel like you should label them as patched GSIs then, as opposed to a dedicated ROM made specifically for the hardware of the Razer Phone 2. It's still awesome that you're working to make GSIs better for the Razer Phone 2; they're nearly daily driver material in my opinion.
f(x)THaxxorX said:
AEX Q and HAVOC Q.. Just won't boot on our device.. I'm building them with specific patches to our device.
Click to expand...
Click to collapse
Thank you for your work. Will you try to sort out why Verizon doesn't work on AOSP as well? It seems to have to signal problems on GSI.
hello, just tryin this rom and cannot get into google play to loggin just when google play moves to loggin screen its became a blackscreen :/
After Magisk-v20.3 has obtained the permission ROOT, it cannot be turned off after shutting down, staying on the first screen, and restarting cyclically. Restart the machine normally, and boot off. You need to flash in the boot again. You cannot use Magisk to obtain the permission ROOT. My phone is in F2FS format
---------- Post added at 08:41 AM ---------- Previous post was at 08:35 AM ----------
There is also a small problem. There will be vase stripes in rec operation, which may be a problem with my machine. Thanks for your work, making Razer useful
It can be LTE???
Sms or mms is can work.. but lte does not work.
LTE+ icon x mark
so this image has mixed result?
Just a friendly reminder that the link doesn't work at the moment. Would like to get my hands on this ROM so I can try it out on my phone.
E_lectrite said:
Just a friendly reminder that the link doesn't work at the moment. Would like to get my hands on this ROM so I can try it out on my phone.
Click to expand...
Click to collapse
Here try this 02122020 image
https://1drv.ms/u/s!AlOEosa7uaGqgbE4oYiZk66qlXjcYw
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
VoLTE
WireGuard
MicroG support
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
Fastboot Flash Essential's Jan update (You can get it here)
Flash twrp, then boot into it.
Flash the rom.
Flash the twrp zip.
Optional: flash OpenGapps package of your choice.
Optional: boot into system, then flash magisk.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url
Download:
ROM https://www.androidfilehost.com/?w=files&flid=314554
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/10.0/changelog_<device codename>.txt
Known issues:
Speaker phone call volume stays at a fixed level.
Visit official website @ crDroid.net
crDroid <device> Telegram
crDroid Community Telegram
Donate to help our team pay server costs
XDA:DevDB Information
crDroid, ROM for the Essential Phone
Contributors
monark88
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Flash January Stock image.
Based On: LineageOS
Version Information
Status: Testing
Created 2020-07-06
Last Updated 2020-11-09
Reserved
I was quite tired of all the mata ROMs with built-in gapps, and so many without all the great customizations that crDroid brings. We needed a ROM with Signature Spoofing for microg support. I've tested out the 360 degree camera, it's working. I tested phone calls, wifi, messaging, and microg installation. All works, can even get location with UnifiedNLP on Android 10! I tested with minmicrog and NanoDroid with magisk overlay.
If this is well received, I'll work on improving issues and getting official status.
Reserved2
Thank you. I'm going to test it.
Funny I would see this. I had the exact same idea yesterday. I finally got around to building crDroid v6.7 with the LineageOS 17.1 kernel as you have. I also used the LineageOS 17.1 device files, and TheMuppets vendor files, (https://github.com/TheMuppets/proprietary_vendor_essential). I then installed Magisk and MinMicroG NoGoolag edition. I find that this ROM so far has been working fine. The only real issue I have found is that Aurora Droid which is installed from the MinMicroG package seems to crash during the first launch sync. However, relaunching it and syncing resolves the issue. This didn't seem to happen when building LineageOS 17.1 with full signature spoofing when I was testing that. Not entirely sure though if others will see that, or if it was my build.
I really hope to see your build get more testing, and get official status!
Best of luck!
TDP95 said:
Funny I would see this. I had the exact same idea yesterday. I finally got around to building crDroid v6.7 with the LineageOS 17.1 kernel as you have. I also used the LineageOS 17.1 device files, and TheMuppets vendor files, (https://github.com/TheMuppets/proprietary_vendor_essential). I then installed Magisk and MinMicroG NoGoolag edition. I find that this ROM so far has been working fine. The only real issue I have found is that Aurora Droid which is installed from the MinMicroG package seems to crash during the first launch sync. However, relaunching it and syncing resolves the issue. This didn't seem to happen when building LineageOS 17.1 with full signature spoofing when I was testing that. Not entirely sure though if others will see that, or if it was my build.
I really hope to see your build get more testing, and get official status!
Best of luck!
Click to expand...
Click to collapse
I did have one force close of NLP backend with minmicrog, but it cleared up after the initial crash. NanoDroid beta had no issues. It's comforting to know others are interested in gapps-less (or less gapps ) ROMs, to the extent of building their own!
monark88 said:
I did have one force close of NLP backend with minmicrog, but it cleared up after the initial crash. NanoDroid beta had no issues. It's comforting to know others are interested in gapps-less (or less gapps ) ROMs, to the extent of building their own!
Click to expand...
Click to collapse
Speaking of NLP, and location services in general, I do notice in the microG self-check mine appears to not have the proper permission to access location in the background, and it seems the permissions is unknown. I see the permissions as "android.permissions.group.UNDEFINED", and I am unable to grant it permission. Did you notice this as well? Or, were you able to provide all permissions without issue?
TDP95 said:
Speaking of NLP, and location services in general, I do notice in the microG self-check mine appears to not have the proper permission to access location in the background, and it seems the permissions is unknown. I see the permissions as "android.permissions.group.UNDEFINED", and I am unable to grant it permission. Did you notice this as well? Or, were you able to provide all permissions without issue?
Click to expand...
Click to collapse
The only thing I had to do finish microg setup was run this from ADB or termux.
Code:
pm grant com.android.vending android.permission.FAKE_PACKAGE_SIGNATURE
I've attached screenshots of my microg self-check results and locations permissions. The only unticked box is last known location, which I think is because I haven't used it since last flash..
EDIT: attachments weren't loading.. uploaded here
Thanks! I have already granted signature spoofing, and that appears correct. I'll check into this more later.
Thanks for the rom, I saw two issues related to Lineage tree, VoLTE not work for me, I fix with a Magisk module and codec aptx don't work too.
mpena said:
Thanks for the rom, I saw two issues related to Lineage tree, VoLTE not work for me, I fix with a Magisk module and codec aptx don't work too.
Click to expand...
Click to collapse
Thank you for reporting the issues. If I may ask, what magisk module did you flash to fix VoLTE?
EDIT: i think i found it here
monark88 said:
Thank you for reporting the issues. If I may ask, what magisk module did you flash to fix VoLTE?
EDIT: i think i found it here
Click to expand...
Click to collapse
Yes that is
Something I have noticed with my build is that the status bar clock freezes, and the network monitor when enabled in the crDroid settings disappears from the status bar quite frequently. The time on the lock screen and clock app appear correct always. Rebooting the system or system UI, as well as locking and unlocking a few times corrects it. But it happens again after the next lock or so. Is this something you have noticed with your build as well? Or, are you not seeing these issues?
So far so good. I love performance on this rom. The only issue for me is crdroid launcher. I'm replace it with pixel launcher + quickswitch and everything working so smooth. I'm waiting for the next build in future for more optimize.
Any chance to have the wireguard module baked in the kernel?
Thanks for this gappless signature spoofing enabled Rom!
Finally one that works out of the box
foueddyf said:
Any chance to have the wireguard module baked in the kernel?
Thanks for this gappless signature spoofing enabled Rom!
Finally one that works out of the box
Click to expand...
Click to collapse
I will add WireGuard support in the next release. Thank you for your suggestions, and feedback!
mpena said:
Thanks for the rom, I saw two issues related to Lineage tree, VoLTE not work for me, I fix with a Magisk module and codec aptx don't work too.
Click to expand...
Click to collapse
foueddyf said:
Any chance to have the wireguard module baked in the kernel?
Thanks for this gappless signature spoofing enabled Rom!
Finally one that works out of the box
Click to expand...
Click to collapse
New release is up. It has WireGuard and VoLTE enabled by default. Tested both, both working. Be aware that there could be a DNS leak for wireguard using kernel right now.
Screenshots for proof
Download is in first post, or you can shortcut here.
Dirty flash worked fine for me, but ymmv.
monark88 said:
New release is up. It has WireGuard and VoLTE enabled by default. Tested both, both working. Be aware that there could be a DNS leak for wireguard using kernel right now.
Screenshots for proof
Download is in first post, or you can shortcut here.
Dirty flash worked fine for me, but ymmv.
Click to expand...
Click to collapse
Bluetooth fixed ? Need gappless but also need aptx.
Also ymmv?
Your Mileage May Vary (YMMV) - basically saying that your results may not match exactly to the ones shown.
dememted1 said:
Bluetooth fixed ? Need gappless but also need aptx.
Also ymmv?
Click to expand...
Click to collapse
I made no changes in regards to aptx. Is there an essential ROM that does have aptx working? I can look at how they've implemented and try to recreate.
Failing that, I don't foresee myself implementing aptx into this ROM.
UPDATE 29-10-2022: I am sorry to inform you that my Galaxy S9 broke and I no longer have the time to maintain this custom ROM. I have seen a new builder in the forum so now I can peacefully move on. Thank you and have fun!
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's not working:
- Hey Google hotword
- Google Maps when on Battery Saver mode
What is working:
- Camera
- Bluetooth
- NFC
- LED
- Mobile data
- WiFi
- SafetyNet
- SELinux Enforcing
- Bixby button
- Fingerprint reader
- Audio
- Screen Mirroring
Not tested:
- VoLTE
- Encryption
Instructions:
Install TWRP
Download the latest build and GAPPS (optional)
Reboot to recovery
Wipe system, data, and cache
Flash the build and gapps
Reboot
Downloads:
https://github.com/matebuteler/galaxy845-LOS-releases/releases/
Sources:
Kernel: repo
Device trees: sdm845-common , starqltechn , star2qltechn
Vendor: https://github.com/dotOS-Devices/proprietary_vendor_samsung_sdm845-common/
Credits:
@Nyoutaa for his work on the device trees
@ruizlenato and @klabit87 for the kernel
@klabit87 for his work on the device trees and the vendor blobs
@lunarlynix for some help during development
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the LOS 17 starqltechn version installed on my SM-G960U1 phone but when I try to install this version, I get an error saying my tablet is a starqlte. It is a U.S. version that I had to pay to have the bootloader unlocked but 17 installed. Can I just modify your ROM to accept the starqlte? Also, should I use the ARM64 or regular gapps.
edit: Went ahead and tried it. Modified first two lines of updater-script for starqltechn to starqlte and it worked. And the ARM64 pico gapps worked. Up and running!!!
Vivo v17pro device system upgrade extra ram increase fucher and android 12 work system upgrade plz
lewmur said:
I have the LOS 17 starqltechn version installed on my SM-G960U1 phone but when I try to install this version, I get an error saying my tablet is a starqlte. It is a U.S. version that I had to pay to have the bootloader unlocked but 17 installed. Can I just modify your ROM to accept the starqlte? Also, should I use the ARM64 or regular gapps.
edit: Went ahead and tried it. Modified first two lines of updater-script for starqltechn to starqlte and it worked. And the ARM64 pico gapps worked. Up and running!!!
Click to expand...
Click to collapse
Really nice that you could fix it yourself! Enjoy your build (it should work without issues on a starqlte)
xaad880 said:
Vivo v17pro device system upgrade extra ram increase fucher and android 12 work system upgrade plz
Click to expand...
Click to collapse
I didn't quite understand your question, although I'll try to answer it as best as i can:
1) If you're asking for a build for the Vivo V17 Pro, then I'm sorry, that won't be possible as i don't have nor the device or the time to maintain it.
2) I'm sorry, A12 won't be possible yet as LineageOS 19 isn't really mature yet. Although @klabit87 is working on a build for the S9 and S9+. As for the Vivo X17P, if you can't find an unofficial build, i found that your device supports Treble, so you may consider installing one of phhusson's GSIs. I'll link them for you: https://github.com/phhusson/treble_experimentations/releases
would i be able to use this to root my verizon s9+? it's on android 10 hardware REV1.1 (G965U)
yoonsunee said:
would i be able to use this to root my verizon s9+? it's on android 10 hardware REV1.1 (G965U)
Click to expand...
Click to collapse
This is just a ROM. If you want to root your phone, use Magisk then
mateobuteler said:
This is just a ROM. If you want to root your phone, use Magisk then
Click to expand...
Click to collapse
thanks for this. don't people use this rom for a rooted phone? I'm a bit confused.
yoonsunee said:
thanks for this. don't people use this rom for a rooted phone? I'm a bit confused.
Click to expand...
Click to collapse
How to Install Magisk on your Android Phone
Magisk is a powerful tool that can help you customize some aspects of your phone or even grant you root access. Here's how you can install it!
www.xda-developers.com
mateobuteler said:
How to Install Magisk on your Android Phone
Magisk is a powerful tool that can help you customize some aspects of your phone or even grant you root access. Here's how you can install it!
www.xda-developers.com
Click to expand...
Click to collapse
Yeah but that doesn't explain how to root a verizon s9+? i thought this rom is used for a rooted phone, but is that not the case? this rom is for non-rooted phones?
yoonsunee said:
Yeah but that doesn't explain how to root a verizon s9+? i thought this rom is used for a rooted phone, but is that not the case? this rom is for non-rooted phones?
Click to expand...
Click to collapse
The ROM is for phones with an UNLOCKED bootloader. You can use it as is, unrooted, or you can use Magisk to root it. Unlocked bootloader and root are two different things.
okay thanks for clarifying.
mateobuteler said:
2) I'm sorry, A12 won't be possible yet as LineageOS 19 isn't really mature yet. Although @klabit87 is working on a build for the S9 and S9+. As for the Vivo X17P, if you can't find an unofficial build, i found that your device supports Treble, so you may consider installing one of phhusson's GSIs. I'll link them for you: https://github.com/phhusson/treble_experimentations/releases
Click to expand...
Click to collapse
Any chance we get a new kernel for S9 Snapdragon in the future?
ele3131 said:
Any chance we get a new kernel for S9 Snapdragon in the future?
Click to expand...
Click to collapse
Yes, Lynix is working on it.
Downloads:
https://firmware.lynix.ca/
Is there a Telegram for this?
mateobuteler said:
Yes, Lynix is working on it.
Downloads:
https://firmware.lynix.ca/
Click to expand...
Click to collapse
Thanks so much for this information, updated my S9 (Starqltechn) and this kernel worked just fine.
Linux Kernel went from 4.9.186 (Klabit V6.5) to 4.9.297 (Lynx R5.2.7).
Performance seems great!
mateobuteler said:
Yes, Lynix is working on it.
Downloads:
https://firmware.lynix.ca/
Click to expand...
Click to collapse
Do you need to reflash Magisk after flashing the kernel?
edit: Went ahead and flashed it. Didn't need to reflash Magisk.
lewmur said:
Do you need to reflash Magisk after flashing the kernel?
edit: Went ahead and flashed it. Didn't need to reflash Magisk.
Click to expand...
Click to collapse
Is your NFC working?
After upgrade kernel I can not enable NFC =/
Edit Logcat:
ele3131 said:
Is your NFC working?
After upgrade kernel I can not enable NFC =/
Click to expand...
Click to collapse
I don't use NFC on my tablet, so I have no idea if it works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps arm64 (MindTheGapps OpenGapps)
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_samsung_universal7880
Device: https://github.com/crdroidandroid/android_device_samsung_a5y17lte
Download:
ROM
Known issues:
None that I khow of.
Credits:
@simon1511 for all the work, originally available on his thread.
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
I'm starting this thread to continue providing up to date crDroid versions for the A5 2017 based on all the work that @simon1511 has done. All credit goes to him and to all the people behind crDroid and LineageOS.
bestiatester said:
I'm starting this thread to continue providing up to date crDroid versions for the A5 2017 based on all the work that @simon1511 has done. All credit goes to him and to all the people behind crDroid and LineageOS.
Click to expand...
Click to collapse
The ROM download link shows crDroid version 7.21, how can I download version 7.26 ?
razorfancy said:
The ROM download link shows crDroid version 7.21, how can I download version 7.26 ?
Click to expand...
Click to collapse
It is not yet available, I thought I could upload it sooner, but it is taking me longer than I expected, I'll post about it again when I have it uploaded. Sorry.
Regards.
Does this mean more updates for the a5 2017 on crdroid 7?
[email protected] said:
Does this mean more updates for the a5 2017 on crdroid 7?
Click to expand...
Click to collapse
I would also be very happy about regular updates
P.S. Switched from crDroid to Lineage a few weeks ago because there were no more updates...
[email protected] said:
Does this mean more updates for the a5 2017 on crdroid 7?
Click to expand...
Click to collapse
Sure, new version 7.26 should be available right now via OTA or for new installs.
The good news is that my plan is to continue compiling new versions of crDroid 7 for this device as long as we keep updating version 7.
The bad news is that this is Android 11 and unless things change a lot there won't be newer Android versions for this device.
So... Hope you enjoy our beloved A11 :-)
Hi!
I'd like to know how it went from those that have upgraded via OTA from the old builds to 7.26.
Any problems on the upgrade?
Did it break something that was previously working?
Regards.
It may be updated to Android 12 or 13 in the future
Thank you for this!
I just recently dropped crdroid to lineage because performance was just tanking then this popped up so back to CrDroid i went
audio broken
heze01 said:
audio broken
Click to expand...
Click to collapse
Is it possible that your audio was already broken before?
heze01 said:
audio broken
Click to expand...
Click to collapse
...you wrote in the thread: ROM][A5|7 2017][13] LineageOS 20 Unofficial on Jan 14. 2023
"Does anyone know if any dolby atmos module works in this rom, what I install damages the audio of the rom"
cappuccini said:
...you wrote in the thread: ROM][A5|7 2017][13] LineageOS 20 Unofficial on Jan 14. 2023
"Does anyone know if any dolby atmos module works in this rom, what I install damages the audio of the rom"
Click to expand...
Click to collapse
In LineageOS 20 no audio mod really works, in addition to the fact that my phone freezes after 5 minutes, in this ROM the audio problem is intermittent, whether or not an audio mod is installed, it can only be solved by turning off the equipment for a few seconds.
heze01 said:
In LineageOS 20 no audio mod really works, in addition to the fact that my phone freezes after 5 minutes, in this ROM the audio problem is intermittent, whether or not an audio mod is installed, it can only be solved by turning off the equipment for a few seconds.
Click to expand...
Click to collapse
I assume that you have performed a clean flash. If I were you, I would flash stock firmware with odin and start again from the beginning.
Can anyone tel me how I can switch back to crdroid 7.26? I use the unofficial lineage os 20 custom rom from this thread, and I want to keep my apps but downgrade to a different rom entirely. So can I do it without a clean flash? Or is there a way to store the progress of my games atleast because few games don't store it in the cloud through google play services. so is it possible?
Kspiderman said:
Can anyone tel me how I can switch back to crdroid 7.26? I use the unofficial lineage os 20 custom rom from this thread, and I want to keep my apps but downgrade to a different rom entirely. So can I do it without a clean flash? Or is there a way to store the progress of my games atleast because few games don't store it in the cloud through google play services. so is it possible?
Click to expand...
Click to collapse
Nope, you need a clean flash.
bestiatester said:
Nope, you need a clean flash.
Click to expand...
Click to collapse
Ohh ok thank you, any way to save my game progress then?
Thanking you!
apps don't fit full screen without rotating screen, When I change screen size to large some apps fit but most of apps don't fit so I can't access top area of apps.
@bestiatester Hi, I bought a Samsung A5 2017 from a friend recently so I decided to root it and install this ROM(already install it) but I have a question should I flash riseKernel to get better battery life or the kernel that comes with this ROM is just as good as riseKernel?