Hello
I was required to re-flash a old LOS-release(LOS for microG 14.1.20180811) and addonsu to a retired MotoE 1524 Surnia.
(just for testing an old app)
Question:
Is the following error message critical and is it required to fix in order to have Xposed working properly?
"Could not load available ZIP files - Pull down to try again"
[ surnia:/ $ su ]
[ surnia:/ # ]
Xposed Installer (3.1.5)
Xposed Status
Xposed Framework version 89 is activ
[but the following error message is shown:]
"Could not load available ZIP files - Pull down to try again"
-> Xposed Installer (3.1.5)
-> Download
-> Pulldown to refresh download's module list
Downloading http://dl.xposed.info/repo/full.xml.gz
with staus 2 (error: Downloading http://dl.xposed.info/repo
/full.xml.gz failed: connect timed out). size 0 bytes
joe890 said:
Hello
I was required to re-flash a old LOS-release(LOS for microG 14.1.20180811) and addonsu to a retired MotoE 1524 Surnia.
(just for testing an old app)
Question:
Is the following error message critical and is it required to fix in order to have Xposed working properly?
"Could not load available ZIP files - Pull down to try again"
[ surnia:/ $ su ]
[ surnia:/ # ]
Xposed Installer (3.1.5)
Xposed Status
Xposed Framework version 89 is activ
[but the following error message is shown:]
"Could not load available ZIP files - Pull down to try again"
-> Xposed Installer (3.1.5)
-> Download
-> Pulldown to refresh download's module list
Downloading http://dl.xposed.info/repo/full.xml.gz
with staus 2 (error: Downloading http://dl.xposed.info/repo
/full.xml.gz failed: connect timed out). size 0 bytes
Click to expand...
Click to collapse
hello,
I think I have the same problem with the Samsung Tab 3 and LineageOS 14.1.
The framework version 89 SD 25 was flashed via TWRP-3.0.2-0.
The tab is rooted.
Error message that ZIPs were not loaded.
Download from server failed.
Are the links dead?
Also other links on this page to download zips and apps do not always respond.
Could someone help me with this?
I am still a newbie.
Greetings
As long as you can use it, I don't see the problem here. The site has been down for a couple of month now. So I guess that is very normal. And he doesn't really seems to care about xposed anymore.
CookieCream said:
As long as you can use it, I don't see the problem here. The site has been down for a couple of month now. So I guess that is very normal. And he doesn't really seems to care about xposed anymore.
Click to expand...
Click to collapse
Very good to know Thank you very much CookieCream for this answer!!
yes
Well, I have the same problem but before installing Xposed. I suppose I could source the files from somewhere but how do I import them into the app?
Alternatively, a fork of the app that still works in 2023 - whether through a web server where the files are rehosted or by allowing them to be sideloaded - would be greatly appreciated. LineageOS 18.1 (Android 10)
CookieCream said:
As long as you can use it, I don't see the problem here. The site has been down for a couple of month now. So I guess that is very normal. And he doesn't really seems to care about xposed anymore.
Click to expand...
Click to collapse
Thats the problem, we cant use it as it wont download its necessary files after a fresh install.
Is there a way of obtaining the necessary files elsewhere instead of Xposed so we can reinstall it manually?
stevieland58 said:
Thats the problem, we cant use it as it wont download its necessary files after a fresh install.
Is there a way of obtaining the necessary files elsewhere instead of Xposed so we can reinstall it manually?
Click to expand...
Click to collapse
yes. by searching for the apk file. the apk (doesn't matter if it has a UI or not) is the module
CookieCream said:
yes. by searching for the apk file. the apk (doesn't matter if it has a UI or not) is the module
Click to expand...
Click to collapse
It actually does matter for a fresh install as you also need v89 for whatever sdk version you have which comes from a download after installing, v89 doesn’t come with the apk.
stevieland58 said:
It actually does matter for a fresh install as you also need v89 for whatever sdk version you have which comes from a download after installing, v89 doesn’t come with the apk.
Click to expand...
Click to collapse
Actually, the xposed app is (normaly) in the zip and the module (you install) are apks. As far as I'm aware, you can't just install xposed directly with a apk (like magisk) but you need custom recovery to install it anyways... So, what's the problem there? The modules? You can install them with a apk. Like gravitybox or any xposedd module...
Related
Hi all!
Having problem with exposed framework version newer 2.3.1.
2.3.1 works fine but new modules required newer version of framework.
I got bootloop after installing versions 2.6.1 and 2.7
Logcat collected.
before_reboot.zip - during installation and reboot
after_reboot.zip - during bootloop.
Please help with running new versions of framework.
p.s. clean install works (at least 2.6) but with gravitybox bootlooped.
p.p.s Android 4.2.2.
p.s. clean install works (at least 2.6) but with gravitybox bootlooped.
Click to expand...
Click to collapse
Looks like a problem with GravityBox, then (or, more specifically, with your device: GravityBox only supports AOSP devices and you're probably running something else).
GermainZ said:
Looks like a problem with GravityBox, then (or, more specifically, with your device: GravityBox only supports AOSP devices and you're probably running something else).
Click to expand...
Click to collapse
Clean stock fw. On 4.1.1 all works fine.
Btw. Not only gravitybox reproduce problem. With modules "Alternate app picker" and "Xposed preferences injector" also bootloop. Tried with only theese modules one by one.
baragoon said:
Clean stock fw. On 4.1.1 all works fine.
Btw. Not only gravitybox reproduce problem. With modules "Alternate app picker" and "Xposed preferences injector" also bootloop. Tried with only theese modules one by one.
Click to expand...
Click to collapse
The logcat you posted shows nothing related to Xposed (or anything else, for that matter).
Damn, maybe I can collect some kind of other logs?
baragoon said:
Damn, maybe I can collect some kind of other logs?
Click to expand...
Click to collapse
It just seems like a coincidence to be honest (correlation/causation). Maybe someone else can suggest something, I can't say any more.
GermainZ said:
It just seems like a coincidence to be honest (correlation/causation). Maybe someone else can suggest something, I can't say any more.
Click to expand...
Click to collapse
Anyway thanks for the help.
Could you send me your /system/lib/libdvm.so file please?
rovo89 said:
Could you send me your /system/lib/libdvm.so file please?
Click to expand...
Click to collapse
You can find requested file in attachment.
Thanks.
any news?
Sorry, I forgot about it... It's not the known issue that I though it might be. Unfortunately, the log doesn't contain enough information, it seems to start later than when the error occurs.
Could you try this please?
1. Execute adb logcat -v time > logcat.txt on your PC
2. Tap "install/update" in Xposed Installer, but don't restart yet
3. Tap "soft reboot"
4. Wait half a minute, then press Ctrl+C
rovo89 said:
Sorry, I forgot about it... It's not the known issue that I though it might be. Unfortunately, the log doesn't contain enough information, it seems to start later than when the error occurs.
Could you try this please?
1. Execute adb logcat -v time > logcat.txt on your PC
2. Tap "install/update" in Xposed Installer, but don't restart yet
3. Tap "soft reboot"
4. Wait half a minute, then press Ctrl+C
Click to expand...
Click to collapse
Fresh logcat
Thanks. This includes the startup sequence and all looks fine, but then it suddenly stops without any error message. I assume that this will require creating several versions between 2.3.1 and 2.4, but I'm too busy for this in the next time...
Some things you could try yourself:
- Disable all module to ensure that it's caused by the framework
- Enable the "Disable Resource API" setting in Xposed Installer
- Try it with JIT disabled: https://github.com/rovo89/Xposed/issues/14#issuecomment-45664672
rovo89 said:
Thanks. This includes the startup sequence and all looks fine, but then it suddenly stops without any error message. I assume that this will require creating several versions between 2.3.1 and 2.4, but I'm too busy for this in the next time...
Some things you could try yourself:
- Disable all module to ensure that it's caused by the framework
- Enable the "Disable Resource API" setting in Xposed Installer
- Try it with JIT disabled: https://github.com/rovo89/Xposed/issues/14#issuecomment-45664672
Click to expand...
Click to collapse
1. Successfully boot with all modules disabled;
1.1 Works with greenify (2.3 build1) and Xposed preference injector (1.3) enabled;
1.2 Doesn't work with gravitybox (3.1.7 and latest) and Alternate app picker (1.02-beta);
2. No effect;
3. No effect;
P.S. all these modules work with xposed installer 2.3.1
baragoon said:
1.1 Works with greenify (2.3 build1) and Xposed preference injector (1.3) enabled;
1.2 Doesn't work with gravitybox (3.1.7 and latest) and Alternate app picker (1.02-beta);
Click to expand...
Click to collapse
Well, that is strange...
AlternateAppPicker is a rather small module, maybe I can send you some reduced (non-working) versions of it to check what exactly makes it fail. But please have some patience, I'm quite busy at the moment and also want to get some time off Xposed.
rovo89 said:
Well, that is strange...
AlternateAppPicker is a rather small module, maybe I can send you some reduced (non-working) versions of it to check what exactly makes it fail. But please have some patience, I'm quite busy at the moment and also want to get some time off Xposed.
Click to expand...
Click to collapse
Thanks, take your time.
I just want to remind about the problem.
it's sad that no news according my problem
I just installed Alliance rom on my att gs5. For some reason it won't let me install xposed framework. Help?
I have the same problem with gt-n8013 cyanogenmod rom
"It won't let me install Xposed framework" – how so? Any errors?
I can't submit a screenshot of the error because I don't have many posts. But it says "Failed to create a backup of /system/bin/app_process
There should be an error above/below that line as well? Have you tried installing Xposed via the recovery?
It's a big error. Its a lot to type but tldr it says permission denied. No, how do I do that?
Rennocc said:
It's a big error. Its a lot tof type but tldr it says permission denied. No, how do I do that?
Click to expand...
Click to collapse
Permission denied? Are you sure you're rooted (if you are, double check that the Xposed Installer is granted root permissions)?
You can install it via the recovery by changing the installation method (press the button).
I have no idea what I did but I tried to install it again and it worked so. Thanks for trying to help but its fixed now haha.
Help
Having trouble with loading Netflix so discovered about the xposed fix for this problem. I tried to install xposed but got the "signature" error message which I believe tells me xposed is already installed. In my "apps", I do not have xposed listed as an installed app. Doing a file search, there are no hits on "xposed". I recently upgraded to latest Beanstalk 4.4.4. Any help would be appreciated. Thank you.
Hi,
I have been using Xposed for a Long time. The first time I downloaded it and installed the latest version, it would keep saying in red that the latest version still needs to be installed. After installing it all different ways, it still didn't work so I discovered that older versions might work. Ever since I have been using version 2.5.1.
Recently, because of the older version, I couldn't download and activate a lot of the modules because they required the later Xposed version so I decided to try fix it and now I'm using version 2.6.1.
I disabled resource hooks and it seemed to work. I'm now using the later version of Xposed and the red message doesn't appear anymore. However, NONE of my modules seem to be working now and I can't figure out why.
If anyone can help me that would be greatly appreciated!
Device: HUAWEI G610-U20
Android 4.2.1 JellyBean
I have attached my latest log file from Xposed.
If any other further information is required I will be happy to provide!
EDIT: one of my modules seem to have randomly started working but the rest still do nothing. They are activated and I have rebooted multiple times.
Anyone?
MasterReturnz said:
I disabled resource hooks
Click to expand...
Click to collapse
According to the log file, multiple modules require those hooks in order to work.
Code:
Loading modules from /data/app/com.elesbb.snapchatfullcaption-2.apk
Loading class com.elesbb.snapchatfullcaption.Xposed
This class requires resource-related hooks (which are disabled), skipping it.
It seems to me that you need to enable the hooks. There are also some other errors, which I can't figure out right now (tired...)
Someguyfromhell said:
According to the log file, multiple modules require those hooks in order to work.
Code:
Loading modules from /data/app/com.elesbb.snapchatfullcaption-2.apk
Loading class com.elesbb.snapchatfullcaption.Xposed
This class requires resource-related hooks (which are disabled), skipping it.
It seems to me that you need to enable the hooks. There are also some other errors, which I can't figure out right now (tired...)
Click to expand...
Click to collapse
If I enable resource hooks then Xposed doesn't work, it says I need the latest version them even tough I already have it installed.
Is there a work around for this?
Im trying to manually flash the ZIP file but I can't actually seem to flash the Xposed installer.zip file. It keeps saying installation aborted in recovery mode. How do I fix this?
Newest version is 2.7 of Xposed Installer. http://repo.xposed.info/module/de.robv.android.xposed.installer
The problem with using the latest version is that it doesn't work. My modules don't work unless I disable resource hooks but then only like 2 of them work
I want to know how to successfully install the latest version onto my phone because currently I can't flash the .zip file to my device. I can't use any custom recovery because there is none that support my device currently.
hi, im running Xposed on lollipop v3.0 aplha 2 !
what is the default setting for the "experimental disabled resource hooks" ?
should it be ticked by default or should it be unticked !
what is the default setting ?
shaajrocks said:
hi, im running Xposed on lollipop v3.0 aplha 2 !
what is the default setting for the "experimental disabled resource hooks" ?
should it be ticked by default or should it be unticked !
what is the default setting ?
Click to expand...
Click to collapse
By default, it should not be ticked.
Hi, im new here and this is my first post, so i appreciate all the help and feedback you can give me.
im interested in using xposed in android TV Box's and Dongles, i've been reading and learning all about it for more than a month now. i've got it to work on most TV Box's and dongles that i have "RK based devices with android V 4.4 or less",but i still have a problem with one device which is an RK3288 based with android 5.1 that is already rooted.
i used twrp to flash xposed-v86-sdk22-arm.zip which was successful, than i wiped Dalvik/cache and rebooted, but the boot stuck on bootanimation, i disabled xposed by installing the uninstaller.zip and everything went back to normal. i tried it many times but with no use. i noticed that twrp doesnt mount internal SD, i installed an older version of bootloader which gave me the ability to mount the internal Sdcard, and i tried to install xposed again and this time it pass the animation and goes to a black screen where i can use the mouse but nothing else. with some research i found that UT3+ is based on firefly board and their original ROM is available for download and it has the same bootloader version that came installed with the device, after flashing the new ROM i was able to mount the internal Sdcard and i tried to install xposed again, and this time it gives me optimizing apps but after it finish the device reboot and get stuck again on bootanimation.
my question is, if there is a log for errors to know why the system/boot get stuck , where can i find them??
and if there is no logs how can i monitor the booting process to find the info i need??
also i know or read what bootloader is but i dont understand how it is effecting xposed installation.
Sorry for the long post, and thank you for your help in advanced
EDIT: i finally got adb connection with the device and used logcat to get the logs, but im not sure how to attach the files. if anyone can help i will gladly send the logs. thanks
Update 1
i was looking at the logs "didnt know what to search for im not a developer" and i noticed that everything is crashing and "Not granting permission" ,"Unknown permission " are everywhere .
sample of logs:
Code:
"com.google.android.partnersetup.permission.WRITE_APP_PROVIDER in
package com.android.vendingW/PackageManager( 4712): Not granting
permission android.permission.BIND_WALLPAPER to package
com.android.camera2 (protectionLevel=18
flags=0x58bc45)W/PackageManager( 4712): Not granting permission
android.permission.BIND_APPWIDGET to package com.android.launcher3
(protectionLevel=18 flags=0x583e45)W/PackageManager( 4712): Unknown
permission android.permission.READ_SETTINGS in package
com.android.launcher3W/PackageManager( 4712): Unknown permission
com.android.launcher.permission.READ_SETTINGS in package
com.android.launcher3W/PackageManager( 4712): Unknown permission "
so i decided to root again with KingRoot, and i tried installing xposed again, and it kinda worked. the system boot and the launcher opens but crashing messages keeps showing "Stresstest for 5.0 has stopped running" , "The process com.android.phone has stopped running", and others.
now im not sure about what im doing but i'll test two methods:
1- i will unpake ROM.img put xposed in the root and update the updater script to install xposed when i flash the ROM.
2- the device can run Linux version from SD card so i might run it and manually install xposed files.
if anyone have any tips or info please let me know. thanks
SOLUTION
For those who are having problems with their RK based android TV Box with android 5.1, if you get stuck on Boot animation or the system boots with black screen and you can use your mouse only, or if you getting errors when you boot the main problem would be your firmware is modified and up to Xposed V.86 is not supported because of the error "No implementation found for void dalvik.system.VMRuntime.clam" you can read more about it in this post https://github.com/rovo89/Xposed/issues/167.
and luckily dsa8310 made a modefied version of xposed, i tested it and it works you can find the download link here http://forum.xda-developers.com/showpost.php?p=67787484&postcount=325
viVaPale said:
luckily dsa8310 made a modefied version of xposed, i tested it and it works you can find the download link here http://forum.xda-developers.com/showpost.php?p=67787484&postcount=325
Click to expand...
Click to collapse
I can't get to the page with the link. (I get a noob alert) We want to try this xposed on a ugoos ut3s (android 5.1 with a rk3288)
Would someone please be so kind to post it here or tell me where I can download it.
Anyone that can compile Xposed v87 to fix this problem for RK3288 Lollipop devices?
https://github.com/rovo89/Xposed/issues/167
https://android.googlesource.com/platform/art/+/379d09fe3c3feb7c2a2fb5a3623689b5ace7e79b
Are there instructions somewhere so we can compile it ourselves?
The code above looks like it needs to be applied to Android source code, what must be changed in Xposed Github code to fix it and compile our own new Xposed only for our devices?
Thanks
humptydumpty said:
I can't get to the page with the link. (I get a noob alert) We want to try this xposed on a ugoos ut3s (android 5.1 with a rk3288)
Would someone please be so kind to post it here or tell me where I can download it.
Click to expand...
Click to collapse
Please try this link https://mega.nz/#!300ggYoJ!1vdLP0OyU2D1ky6pWv-Y3VJFH5paHSAqV3Y8A64bvkk
i recommend you download the xposed uninstaller in case something wrong happend
viVaPale said:
Please try this link https://mega.nz/#!300ggYoJ!1vdLP0OyU2D1ky6pWv-Y3VJFH5paHSAqV3Y8A64bvkk
i recommend you download the xposed uninstaller in case something wrong happend
Click to expand...
Click to collapse
Wow ! Work nice on my haier pad971 (ifive air clone) rk3288 5.1.1 !!
Thanks so much
does anyone know if there's an RK3288 enabled xposed v89 built to avoid the issues described by viVaPale? Tried the one from 3.1.5 installer, but after boot it doesn't load the launcher, only mouse can be moved around like viVaPale describes.
I have my Samsung A30 (SM-A305F) rooted with magisk canery (87de0e7a) by flashing patched boot img via odin. Now, If i try to hide magisk with random package , it demands internet connection and install the latest version (9348c5ba). BUT i don't want to upgrade as the updated version has weird bug of rejecting SU automatically (with a very brief pop-up). I then need to ---> uninstall the repackaged app ---> Reboot ---> install 87de0e7a version ---> then it become functional again. I don't have TWRP installed. Re-flashing new patched boot requires wiping data. i don't want to do factory reset
Now I want to hide magisk as PUBG MOBILE might be crashing due to root detection. Please help me achieve solution:
(1) hide magisk manager without updating
(2) update magisk manager without that BUG of rejecting SU automatically
1 - Hide the Manager and let it update fully, no way around that. Then replace /data/user_de/0/com.H3.nuhw6UY.GoCgl/dyn/current.apk with the apk of whatever Manager version it is you want to use (and don't forget to set the same permissions and owner).
Edit: replace the package name above with the one your Manager uses.
2 - Seems to be a similar issue reported here: https://github.com/topjohnwu/Magisk/issues/2944
If there's anything to be done about it, it will be eventually.
If you can get some proper logs showing the su rejection and add to the above linked issue that would be great.
Note: i previously managed to hide it successfully when there was no newer version. It would just download the same version from the internet and repackage itself with random package name. But some days ago, i restored original manager and now i can't get it to hide.
Didgeridoohan said:
1 - Hide the Manager and let it update fully, no way around that. Then replace /data/user_de/0/com.H3.nuhw6UY.GoCgl/dyn/current.apk with the apk of whatever Manager version it is you want to use (and don't forget to set the same permissions).
2 - Seems to be a similar issue reported here: https://github.com/topjohnwu/Magisk/issues/2944
If there's anything to be done about it, it will be eventually.
If you can get some proper logs showing the su rejection and add to the above linked issue that would be great.
Click to expand...
Click to collapse
Thanks for replying. I followed our steps (com.mkhirsnpiw.z.kkt was used instead of com.H3.nuhw6UY.GoCgl). But it again says the same thing, "Upgrade to full magisk to finish the setup. Download and install?". Clicking ok upgrades it again
Shihabus Sakib Rad said:
Thanks for replying. I followed our steps (com.mkhirsnpiw.z.kkt was used instead of com.H3.nuhw6UY.GoCgl). But it again says the same thing, "Upgrade to full magisk to finish the setup. Download and install?". Clicking ok upgrades it again
Click to expand...
Click to collapse
Did you place the new current.apk file in the same directory and give it the proper permissions (same owner and permission 600)? I just tested and had no issues downgrading the hidden Manager to 285 this way.
Didgeridoohan said:
Did you place the new current.apk file in the same directory and give it the proper permissions (same owner and permission 600)? I just tested and had no issues downgrading the hidden Manager to 285 this way.
Click to expand...
Click to collapse
yes with MiXplorer.
When Manager updated itself , i tried to update the magisk ( not the manager). But it bricked my phone as it won't start. i had to flash stock firmware via odin. It happened what i feared about. Now, i will try to patch boot img with new version.
UPDATE: I patched and flashed boot img using canary 290. after rebooting , this time there was not that Bug of rejecting SU automatically. Root was functional. But when it asked to do additional setups, it was stuck on setup operation forever and when i tried to hide manager, it showed "hiding magisk manager failed". so i uninstalled canary 290 and installed 7.5.1 (267) . This time additional setup was completed and rebooted automatically. But there was some problem with su access. so i uninstalled 7.5.1 (267) and installed canary 290. Root is now functional and it does not ask for additional setup anymore. (meaning setup was complete?). But still shows "hiding magisk manager failed" when try to hide manager. I don't know what is the problem . I was using canary 284 without any problem. PUBG mobile was runnig without problem. Now I am tired......
About hiding the Manager failing:
https://www.didgeridoohan.com/magisk/Magisk#hn_Cant_hide_the_Magisk_Manager
Didgeridoohan said:
About hiding the Manager failing:
https://www.didgeridoohan.com/magisk/Magisk#hn_Cant_hide_the_Magisk_Manager
Click to expand...
Click to collapse
Disabling Play Protect Worked !!!! Thank you Sir :angel: