Database Develop

The strangest bootloader screen I have ever seen

Can someone explain this

bwtmanagement said:
Can someone explain this
Click to expand...
Click to collapse
I've not experienced this.
Are you rooted / bootloader unlocked?
Do you have any idea what caused it?
Were you able to recover?
If so, what did you have to do?

bwtmanagement said:
Can someone explain this
Click to expand...
Click to collapse
Did you do anything to the bootloader by flashing any files? Did you unlock the bootloader? If the answer is yes then you might have an issue with flashed files.
If no and you have not touched the device then you might have a rare error. If you have a carrier phone with Verizon you might want to try their "repair assistant" which is the same as what is mentioned on the phone screen. It seems to have a repair function. You will have to connect the phone via USB to your computer. Download the assistant from here. https://www.verizonwireless.com/support/knowledge-base-209211/
If you don't have a Verizon moto x4 or you have another carrier then either still give the software a shot or take it to a Motorola service centre.
Can pretty much confirm the same with an old moto z force post on the Lenovo forums. If you have Verizon downloading the software will solve the problem.

I know that I was trying to flash to stock and that was the result, rsd can see the device but when I flash it it says failed to switch to fastboot

Yea bootloader has been unlocked for weeks and started acting up and I was trying to clear it and start over and no I can't get it to flash spar_chunks

Any ideas

Notice you mentioned RSD failing to switch to fastboot... I assume you tried reflashing the GPT/bootloader directly from fastboot?
If you hit volume up/down from the screen you posted, does it go through the other fastboot screens?

No i get the quausb or whatever that is in my comp for deviecs now...and no screen mow and yes the parition was compermised by error on my part

Mi 8 bricked authorized account (s-unlock.com)

hello everybody!
i bricked my Mi 8 like other thousands of users flashing global rom since chinese rom (i selected "clean all and lock" by accident).
I have been searching for a solution for weeks now but it seems that the only way is to get an authorized account to be able to bring back to life our devices.
It is redicolous that we have to pay to unlock our phones, anyway, i am searching for people with the same problem to buy multiple accounts for cheaper.
any answeres are much appreciated.
thank you in advance!

Forget that sh*t. Write this guy and ask him to help you. He has already helped more than 400 people I think and he's doing exactly the same than s-unlock bast*rds but for free, just to help. Honestly I think he deserves a donation if he helps you (like I donated when he helped me) but he will never tell you nothing about it. I truly admire him. @NikSalsa
https://forum.xda-developers.com/showpost.php?p=77755947&postcount=11

descarao81 said:
Forget that sh*t. Write this guy and ask him to help you. He has already helped more than 400 people I think and he's doing exactly the same than s-unlock bast*rds but for free, just to help. Honestly I think he deserves a donation if he helps you (like I donated when he helped me) but he will never tell you nothing about it. I truly admire him. @NikSalsa
https://forum.xda-developers.com/showpost.php?p=77755947&postcount=11
Click to expand...
Click to collapse
thank you! so i really have to open the phone? could i buy an edl cable? because i really dont want to risk that task.

marcopitt said:
thank you! so i really have to open the phone? could i buy an edl cable? because i really dont want to risk that task.
Click to expand...
Click to collapse
You really have to. EDL cable doesn't work. By the way it looks like the guy I quoted in my previous post has set a web to charge for the service, sad. You can write him anyway and see what he answers.

descarao81 said:
You really have to. EDL cable doesn't work. By the way it looks like the guy I quoted in my previous post has set a web to charge for the service, sad. You can write him anyway and see what he answers.
Click to expand...
Click to collapse
yeah i contacted him and he sent me the link of the website, he basically provides the same service like s-unlock.com, just for cheaper, about 16 euros. I will go for that, it is the only solution.
thank you so much!

The difference is that EDL authorization doesn't require to open the phone.

Guys, hello!! I bricked my Mi8 too....
In my cellphone says "This MIUI version can't be installed on this device"
And when i will flash a new rom in Miflash says "Erase boot error"
In MiPCSuite have some error when i try to recovery...
Please guys, i really need some help with someone, i can pay if is the case...
Please...

Thanks for the answer, i already solve my problem, i got a ID verification and flash my phone. I was desesperated, LoL

Dude, could you help me? This happened to me today, could you explain to me how was your solution?
Are you Brazilian ?
kayke teixeira said:
Thanks for the answer, i already solve my problem, i got a ID verification and flash my phone. I was desesperated, LoL
Click to expand...
Click to collapse

NikolasG. said:
Dude, could you help me? This happened to me today, could you explain to me how was your solution?
Are you Brazilian ?
Click to expand...
Click to collapse
Of course, yes, i'm brazilian.
You need to open your cellphone and do the TESTPOINT for enable the COM PORT on your computer, the EDL mode. The next move is to flash with Miflash program and will ask you the ID verification, this ID only developers guys have.
But, they charge a value to do this service, which is to only authenticate on your computer, I have the contact of it if you want I can pass you, is a Brazilian.
I paid R$90,00BRL

Po thank you very much, I'll see him then, I managed to open and did EDL mode but my account does not have access, I'll talk to him
kayke teixeira said:
Of course, yes, i'm brazilian.
You need to open your cellphone and do the TESTPOINT for enable the COM PORT on your computer, the EDL mode. The next move is to flash with Miflash program and will ask you the ID verification, this ID only developers guys have.
But, they charge a value to do this service, which is to only authenticate on your computer, I have the contact of it if you want I can pass you, is a Brazilian.
I paid R$90,00BRL
Send me a message on whatsapp or telegram (79) 99198-7676
Click to expand...
Click to collapse

Good Morning,
I canceled a service on s-unlock, does anyone know how I get my money back?

Ayudame Amigo
Para poder Autorizar Mi ID para poder flashear por Edl

NikolasG. said:
Good Morning,
I canceled a service on s-unlock, does anyone know how I get my money back?
Click to expand...
Click to collapse
Are you received your money back?

descarao81 said:
Forget that sh*t. Write this guy and ask him to help you. He has already helped more than 400 people I think and he's doing exactly the same than s-unlock bast*rds but for free, just to help. Honestly I think he deserves a donation if he helps you (like I donated when he helped me) but he will never tell you nothing about it. I truly admire him. @NikSalsa
https://forum.xda-developers.com/showpost.php?p=77755947&postcount=11
Click to expand...
Click to collapse
I am just as suffering from being fooled into purchasing a locked smartphone. But, I received a lot of help on this forum. I thank everyone. Mostly thanks to @NikSalsa MOD EDIT:link removed for the attention and support :Boa:. I believe one of the goals of this forum is to promote help, solutions and problem solving. And in this way fraternal actions arise. Something rare today. About services charged I think fair, as well as donation that I will make for sure. I hope that the willingness to help and recognize the help will not be extinguished.

NikolasG. said:
Good Morning,
I canceled a service on s-unlock, does anyone know how I get my money back?
Click to expand...
Click to collapse
Hey, I had the problem that my Mi8 China version with Global ROM was brick. After spending hours trying to test some of the possibilities and guesses of others. Unfortunately they all ended without success.
So i have addressed MOD EDIT: link removed under Telegeram. If necessary it is also reachable via Whatsapp under MOD EDIT: number removed.
He has explained with the steps what I need everything and after everything was downloaded it takes barely 5 minutes and my Mi8 started again.
Of course you can try all the instructions online or contact @remote_repair98 very fast.

Hey i have the same problem but not same device mine is redmi note 7 lavender but i lost my account password and i can't recover it so i opened the phone and tried flashing it vie EDL test points but iis say the edl auth error can you gelp me pls

On Mi 8 if your fastboot is still available, try issuing 'fastboot oem edl'.
This reboots my unlocked Mi8 into EDL mode without opening the back.
Tool https://github.com/bkerler/edl (thanks to Bjorn) has edl programmer included that doesnt require auth for this phone (poco loader in matched automatically) and allows for programming cmds.
You can either use this QDL or QFIL to download required firmware. Only stock firmware will boot if bootloader in locked.
Perhaps this will help someone.

chris178 said:
On Mi 8 if your fastboot is still available, try issuing 'fastboot oem edl'.
This reboots my unlocked Mi8 into EDL mode without opening the back.
Tool https://github.com/bkerler/edl (thanks to Bjorn) has edl programmer included that doesnt require auth for this phone (poco loader in matched automatically) and allows for programming cmds.
You can either use this QDL or QFIL to download required firmware. Only stock firmware will boot if bootloader in locked.
Perhaps this will help someone.
Click to expand...
Click to collapse
hello my device has been bricked for a year now i think could you help me im not a total nooby but is it possible to restore it it only goes into edl and xiaomi has locked my account i did flash + lock by accident ...
i tried cracked miflash tools other cracked tools nothing worked

chris178 said:
On Mi 8 if your fastboot is still available, try issuing 'fastboot oem edl'.
This reboots my unlocked Mi8 into EDL mode without opening the back.
Tool https://github.com/bkerler/edl (thanks to Bjorn) has edl programmer included that doesnt require auth for this phone (poco loader in matched automatically) and allows for programming cmds.
You can either use this QDL or QFIL to download required firmware. Only stock firmware will boot if bootloader in locked.
Perhaps this will help someone.
Click to expand...
Click to collapse
there was some technical jargon i couldn't understand if i wont trouble you too much can i dm you on telegram or something i wont ask too much questions

New RedMagic3S wont boot!

So i have a day old red magic 3s that i tried to update, and now it just reboots to the blue screen with the recovery option. I try selecting recovery, but it never boots into recovery. Any ideas? I just got the phone, and now this?

How did you try to update it?

bignazpwns said:
How did you try to update it?
Click to expand...
Click to collapse
I used the update package from Red Magic website. It failed at 40%, rebooted, and now I only get to the blue screen that has serial #, and reboot to recovery, reboot to emergency recovery, and edr. I tried recovery, but it reboots to same screen. I tried edr, the screen turns off. I think I have a major issue. Any idea what happened?

You could try flashing with fastboot and see if that helps. There's guides on how to do it. The update zip will have the files. If that doesn't work I would just RMA it since you have a warranty.
If those don't work the only real option is to flash from a EDL programmer.
I have flashed all those files from the site to a phone and had no issues. So if it failed at 40% you could have an issue that might be hardware related.
Could try QFIL.

Be careful with QFIL tho.

bignazpwns said:
You could try flashing with fastboot and see if that helps. There's guides on how to do it. The update zip will have the files. If that doesn't work I would just RMA it since you have a warranty.
If those don't work the only real option is to flash from a EDL programmer.
I have flashed all those files from the site to a phone and had no issues. So if it failed at 40% you could have an issue that might be hardware related.
Could try QFIL.
Click to expand...
Click to collapse
I tried the fastboot flashing. I still only get to the bootloader screen. I contacted Red Magic, they wont accept a RMA, because i unlocked bootloader. They said warranty is void. I dont have any idea what QFIL is. I see there is some tool for the red magic 3. Would that work?

Enjoy your new paperweight OP! LMFAO. This phone is unrepairable without the nubia unbrick tool.

bignazpwns said:
Be careful with QFIL tho.
Click to expand...
Click to collapse
@bignazpwns could you help me out with QFIL? I have the program, but need the proper files. Thank you.

Yamvmax1 said:
@bignazpwns could you help me out with QFIL? I have the program, but need the proper files. Thank you.
Click to expand...
Click to collapse
Private message inbound

bignazpwns said:
Private message inbound
Click to expand...
Click to collapse
None of what you linked for me would help. I think we need the unbrick program. There is 4 or 5 of us now. Do you have it? Thank you.

Yamvmax1 said:
@bignazpwns could you help me out with QFIL? I have the program, but need the proper files. Thank you.
Click to expand...
Click to collapse
I also need the files?

Red Magic 3S unbrick tool here in the forums
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3s-unbirck-tool-t4025207

nv data corrupted

Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?

sk3lt said:
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
Click to expand...
Click to collapse
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.

otonieru said:
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
Click to expand...
Click to collapse
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?

sk3lt said:
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
Click to expand...
Click to collapse
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?

otonieru said:
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
Click to expand...
Click to collapse
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.

sk3lt said:
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
Click to expand...
Click to collapse
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.

otonieru said:
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
Click to expand...
Click to collapse
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?

sk3lt said:
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
Click to expand...
Click to collapse
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.

tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?

sk3lt said:
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
Click to expand...
Click to collapse
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.

tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
tsongming said:
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
Click to expand...
Click to collapse
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned

sk3lt said:
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
Click to expand...
Click to collapse
use testpoint method, and flash it using QFIL.

otonieru said:
use testpoint method, and flash it using QFIL.
Click to expand...
Click to collapse
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?

sk3lt said:
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
Click to expand...
Click to collapse
root cause of your issue is that you play with wrong qcn and messed up the nv,
wince you cant plugged to qpst, you need someone to make EFS backup for you torestore from twrp

You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work

How can I do this? Can you help me please?

jokerm90 said:
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
Click to expand...
Click to collapse
How can I do this? Can you help me please?

Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.

sk3lt said:
How can I do this? Can you help me please?
Click to expand...
Click to collapse
You need backup EFS and Modem via TWRP first(better with OrangeFox). After you need Magisk first and some manipulation with QCN file via QPST. I will write it later
MohamedYousri said:
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
Click to expand...
Click to collapse
Maui Meta is for MTK cpu phones. You need QPST

Note 8 Pro is MTK Device

BlackShark 3/3 Pro/3S unlock bootloader files.

This unlocking method was researched by myself, so I bought two machines to study it.
I know that many Chinese can unlock the Bootloader, but they are unwilling to announce it.
They charge high unlock fees to unlock for users in need. This is shameful,I don't like selfish Chinese people.
so I plan to publish it directly.
Let all users have the right to choose whether to unlock, I hope you like it.
How to use it?
Both BlaskShark 3/3Pro and 3S can use this file to unlock the Bootloader.
No need to pay high fees to unlock.
Enter the edl mode method 1: when the phone is off, press and hold the volume up and down keys at the same time,
insert the USB cable to connect to the computer to enter the edl mode.
Entering edl mode Method 2: Turn on usb debugging on the phone, and run adb.exe reboot edl in cmd to enter edl mode.
and use the miflash tools to flash unlockfiles.
Then enter fastboot mode, run UnlockBL.bat to unlock your phone.
Enjoy it！
Download link:
mega.nz/file/fFMgDSzS#zc6_mOGJaLPUwO20IqfZMENJExuTaVRhpYhirsu4Xfw
Blackshark 3/3Pro TWRP download link:
mega.nz/folder/KU8DTZhR#M2YjCHUrmupBkovTam2HtQ
Blackshark 3 KLE-H0 global beta rom download link:
mega.nz/file/rc9EQaQK#0pEu0S95u0DIzO9lCLSl9_wVArc1YUbDN6iIE5elrD4
Blackshark 3 Pro MBU-H0 global rom download link:
mega.nz/file/vVUiTS5A#hOts3JROqqvWAdPKjvp_YqQ0I45av4CH4o26pFJAs84
Unlocking the Bootloader through this method may cause the fingerprint to be lost,
and it needs to be recalibrated before it can be used.
Fingerprint calibration tutorial
Enter *#*#466349#*#* on the dial keypad
Will jump to the fingerprint calibration interface,
Then click 售后校准, you will be prompted to Put the FLASH FLA then click START.
Click Start first, and then immediately press your thumb on the fingerprint module, keeping the phone from moving.
Wait for this step to be complete, then it will prompt Put the black FLAT
You can use black things, or wrap your thumb in black clothes, and then press and hold the fingerprint module.
Then wait for the calibration to complete
The fingerprint module must be completely covered during the calibration process, otherwise the unlock rate will decrease
After success, restart the phone to re-enter the fingerprint and use the fingerprint to unlock.

Thanks for sharing
https://mega.nz/file/TMtj2SJS#7hylBi9HjgA-iR-GQ81-6LoG9bjvI7tfmSdfBqK2pdM

John Eveline said:
This unlocking method was researched by myself, so I bought two machines to study it.
I know that many Chinese can unlock the Bootloader, but they are unwilling to announce it.
They charge high unlock fees to unlock for users in need. This is shameful,I don't like selfish Chinese people.
so I plan to publish it directly.
Let all users have the right to choose whether to unlock, I hope you like it.
How to use it?
The phone enters the edl mode, and use the miflash tools to flash unlockfiles.
Then enter fastboot mode, run UnlockBL.bat to unlock your phone.
Enjoy it！
Download link:mega.nz/file/TMtj2SJS#7hylBi9HjgA-iR-GQ81-6LoG9bjvI7tfmSdfBqK2pdM
password：bs3ublfiles
Click to expand...
Click to collapse
good sharing. hope someone will tested it.
i have already paid the china man tho to unlock. but only on DPX beta rom. doyou hae the MP1 stable rom bro?

I will update the files

hope someone test this... thanks sir

Now it works like a charm

bouyhy01 said:
Now it works like a charm
Click to expand...
Click to collapse
is there a proof? did you document the procedure?

takoyaki17 said:
is there a proof? did you document the procedure?
Click to expand...
Click to collapse
Proof? The guy did us a favor. It works. Thanks OP.

bs3pro said:
Proof? The guy did us a favor. It works. Thanks OP.
Click to expand...
Click to collapse
yes.i need someone to verify that it is working. i'm thankful for OP's effort by the way.

takoyaki17 said:
yes.i need someone to verify that it is working. i'm thankful for OP's effort by the way.
Click to expand...
Click to collapse
It works

bs3pro said:
It works
Click to expand...
Click to collapse
i'll wait for someone to prove it.not just by saying it.black shark has no dev support.so we can't unbrick this phone if something bad happen while doing this. thanks anyway.

I didn't realize everyone needs their hand held. It's called hacking for a reason. This bl unlock couldn't be easier.

So Im VERY new to this. Does this give me the global rom? Also do I need to backup my phone before? The phone is great but the issues with push notifications for certain apps on the Chinese Rom is just a pain in the butt.
Also Im on the bs3 12gb ram 128gb storage is there any different steps I need to take?

lostpunkrock said:
So Im VERY new to this. Does this give me the global rom? Also do I need to backup my phone before? The phone is great but the issues with push notifications for certain apps on the Chinese Rom is just a pain in the butt.
Also Im on the bs3 12gb ram 128gb storage is there any different steps I need to take?
Click to expand...
Click to collapse
No, no rom included. All it does is unlock your BL. It will wipe the device too.

takoyaki17 said:
i'll wait for someone to prove it.not just by saying it.black shark has no dev support.so we can't unbrick this phone if something bad happen while doing this. thanks anyway.
Click to expand...
Click to collapse
Nothing will brick man its just a file that patch the rsa keys blackshark’s servers verification when trying unlocking with the usual unlock commands and it unlocks a bootloader adb interface then you run the bat file and voila

bouyhy01 said:
Nothing will brick man its just a file that patch the rsa keys blackshark’s servers verification when trying unlocking with the usual unlock commands and it unlocks a bootloader adb interface then you run the bat file and voila
Click to expand...
Click to collapse
i see. thanks
have you tried it?

Can anyone post photo proof that this works? Like an image of the bootloader screen and a screenshot of Developer Options?

takoyaki17 said:
i see. thanks
have you tried it?
Click to expand...
Click to collapse
Someone told me he did ,unfortunately i dont have the device

bouyhy01 said:
Someone told me he did ,unfortunately i dont have the device
Click to expand...
Click to collapse
thanks.. i will wait for someone to try this first.

bs3pro said:
No, no rom included. All it does is unlock your BL. It will wipe the device too.
Click to expand...
Click to collapse
Cool well I guess I will wait until the global rom appears somewhere. Need to change over because this not being able to use whatsapp properly is driving me mad.
Cant afford to pay to do it for a while so hoping it shows up online so i can do it myself.