I've got this problem since last year. I have read about the issue on the internet, no solution provided so far.
When I connect my mobile to any PC, it says 'check your charger connection' as on the screen below.
- I can only transfer files over WIFI which is extremely annoying.
- no problem with charging, all good here, just the problem with recognizing the phone by a computer
- I remember that there should be a menu when you plug usb cable between a mobile and pc, askig you what to choose (transfer, charging etc). It is gone.
- I have tried different cables and different PCs
- USB debbuging is ON but when it is off, nothing changes
- in Developer Options - Default USB configuration - I choose Transferring files, doesn't help
- the usb socket in my phone must be working if it lets me to charge the phone without any problems
- DEX only allowes me to transfer files via WiFi.
Any ideas guys? I am on A13 but it happens since A12.
Related
I have a weird problem with my USB port (I assume it's PC related but...?).
I can connect and sync my kaiser with a std or the HTC USB cable but if I cradle it in the Seidio or connect the 3-1 adapter I get the response "unknown USB device". Strange enough is that NONE of the two is charging. At other PC's it sometimes works, sometimes not. I assume my USB drivers of my Dell Optiplex are toast but how to reinstall...
Well, start with checking to see if under settings------->connections-------->"usb to pc ", the usb to pc option doesnt have " enable advanced networking functionality" checked ( enabled ). That will most times cause issues with activesync connecting and especially prevent USB charging.
Next, check to see if actvesync is set to use USB as an active connection type under its settings.
Delete any previous activesync pairs you may have and try to reconnect. I somehow doubt its your drivers but the best way to check is to just go to Microsoft.com, navigate to their downloads section, and download a new copy of activesync.
One last thing to check. Some roms have a battery option (settings ----------> power-------> battery tab ) that doesnt allow charging when connected to a PC. Make sure that is NOT checked.
Thanks for your reply.
I tried all you mentioned beside uninst. AS clean the PCs reg and reinstall.
Will let everybody know.
When I connect the X1 via USB it charges the device but won't connect to either of the PCs I have tried.
I have disabled the Enhanced Activesync connections, changed from AS to external disk & tried the things that I can easily find.
Anyone got any ideas, I don't really want to send it away ?
Does your ActiveSync work?
Hi All,
As per title, my Asus ROG Phone II is not recognized by my PC when I connect it through USB.
It's not even that ADB commands aren't working or such: even just connecting "normally" (e.g. without USB debugging activated), the phone will charge but won't show up in the PC, and vice-versa it won't appear as connected to USB in the phone settings.
I've tried with two different PCs and the problem persists.
Am I missing something?
Thanks,
TG
Hey guys.
I'm facing the following problem. Whenever a I plug my 12 Pro on the USB (2.0 or 3.0, doesnt matter) on windows 10, I hear the phone connecting, and then disconnecting, the windows file explorer showing the phone storage content pops up, and the closes, the phone disconnects, and connects again, and on and on and on and on.
I have already deleted all my drivers, reinstalled everything, updated windows but nothing worked. Also, have changed all the power options of USB ports. I've tested different ports, different cables, but got nothing. My old Pixel 3XL works perfectly with the same cable and ports.
I'm currently running EU 13.0.30.
*Edit: It happens with any data transfer mode. If I keep the option "no data transfer" on, I can hear the sound of the usb connection, and it charges normally without looping.
Is there any fix for that?
Try to put a USB hub between the PC and the device.
The obvious solution is to keep it on "no data transfer".
You can still use ADB. You can still use AdbSync.exe (in my sig).
That's what I use and I never play with MTP or PTP or UMS.
Dear All,
Yesterday I switched on my old Pixel 4a5G then connected to the PC and... nothing happened.
I dont have any notification on Windows (even on Ubuntu) about new device (checked also device manager) and the same on the Pixel.
Phone only charged.
I decided to check another cables and I had the same result. I even bought new cable USB Ato C 3.2 gen 1 and still nothing only charging.
I checked on another PC the same - only charging my device and no connection. Of course I switched on usb debugging on Developer Mode and USB/Android Auto File Transfer option, even PTP doesen't work.
So I had:
- no notification about USB connection on the Pixel
- no notification about new device on the Windows (missing sound , no device Android or another name in Device Manager on the Windows)
I switched Pixel in safe mode - the same result
I connected to the Pixel my WD SE protable hard drive and... I had notification about USB device, I opened it and had two options:
- This device (which was choosen)
- Connected Device
rest like File Transfer, Connection Thetering were grayed out
I choose Connected Device and there was an info "switching" and after couple seconds "cound not switch..."
If anyone had the same problems? could be software problem or USB port broken on the Pixel?
I have latest updates installed on the Pixel. I did Factory Reset but nothing changed. Even on Fastboot mode Windows didn't recognize device (no sound nothing)
Xrzysioo said:
Dear All,
Yesterday I switched on my old Pixel 4a5G then connected to the PC and... nothing happened.
I dont have any notification on Windows (even on Ubuntu) about new device (checked also device manager) and the same on the Pixel.
Phone only charged.
I decided to check another cables and I had the same result. I even bought new cable USB Ato C 3.2 gen 1 and still nothing only charging.
I checked on another PC the same - only charging my device and no connection. Of course I switched on usb debugging on Developer Mode and USB/Android Auto File Transfer option, even PTP doesen't work.
So I had:
- no notification about USB connection on the Pixel
- no notification about new device on the Windows (missing sound , no device Android or another name in Device Manager on the Windows)
I switched Pixel in safe mode - the same result
I connected to the Pixel my WD SE protable hard drive and... I had notification about USB device, I opened it and had two options:
- This device (which was choosen)
- Connected Device
rest like File Transfer, Connection Thetering were grayed out
I choose Connected Device and there was an info "switching" and after couple seconds "cound not switch..."
If anyone had the same problems? could be software problem or USB port broken on the Pixel?
I have latest updates installed on the Pixel. I did Factory Reset but nothing changed. Even on Fastboot mode Windows didn't recognize device (no sound nothing)
Click to expand...
Click to collapse
could very well be the phones usb port i had one similar on a htc u11 that acted the same,the only way to know for sure is to replace it or try cleaning it really goor with a squished qtip ,, lol
hammered58 said:
could very well be the phones usb port i had one similar on a htc u11 that acted the same,the only way to know for sure is to replace it or try cleaning it really goor with a squished qtip ,, lol
Click to expand...
Click to collapse
I will send it to the service to check it and replace
Mine stopped connecting to PC after Nov2022 security update, still will not connect & Google dont want to know, they just shut threads down.
Hi !
I have had the same problem for a long time !!! No more notifications to choose it when connect my Pixel to PC !!? no Pop-up to choose "Connection, Photo Transfer, Charge, etc..."
The simplest solution is to connect the Pixel via USB to the PC/MAC then open Settings/Connected Devices/USB/ To finally access to choose "File Transfer, Connection Sharing, Midi, Etc..." menu.
Do not forget to first activate the developer mode and USB debugging.
But I don't understand why I never see the notification to choose