Hello to whom this may concern. I recently flashed a rom on my s3 mini. At first it booted up and everything but then it out of know where shut down. After hours of getting it to boot into download mode it worked. But when i try to flash the original rom or twrp it gives me the
movi_write card status 2​error.
May someone please help me fix this as this is the only phone i have for now as my main phone is acting up.
Related
hello all
yesterday i wanted to flash a friend tp2
when i flashed it it went to 100% and then it gave a rom code error
i restarted the phone in bootloader to flash a other rom and it wanted to read the image on the sdcard
wich resulted in red serie of digits on top of the screen 00058002
and the phone turned off
i deleted the image from the sdcard and tried it again
i came in bootloader and i saw threu the spl text rom upgrade error
now everytime i enter bootloader it turns off the phone in 5 sec
i managed to run a task 29 one time by resetting the phone multiple times
can some one help me
owww its not fixed
i managed to get stock rom on it again but during the custimizsation the phone turned off:S
and now i have the same problem again
edit: i dont know how but its fixed
Hello,
could someone please help me with my issue about the phone, as the name says, it stops booting at the glowing S samsung galaxy s logo, does the whole animation and sound before hand but nothing after...
It only vibrates for a milisecond once and three rapid vibrationg after few seconds then repeats... and screen goes black as well...
What I did: I did what the guide to get the 3 button download mode said, I tried it while my phone was fully functional and it did enter the download mode... So I thought it worked fine, also did the rooting thing as it's said in a guide here somewhere... an icon, superuser showed up...
I had my sd card unmounted when I tried to flash my rom using this guide :
Code:
well I can't put a video link here, so I guess just the name of the video on youtube could be sufficient:
Samsung Galaxy S Full Customization Guide (Part 1 of 3)
I did everything according the guide and after I first hit Start in odin, it started flashing, then phone restarted and gave me an error... and that is the current state...
I can't go into download mode
I can go into the Clockwork recovery mode tho
I tried to press the recovery firmware but it didn't work, also tried to mount sd card in clockwork advanced settings but it gave me an error...
I also get a screen sometimes when I try to access clockwork recovery mode that says forced upload by key pressing...
Is there a way to fix this ? I am really hopeless in this...
Thank you so much in advance
Hello there. Today, I tried to format my samsung galaxy s3 lte running on an old omnirom nightly. And quite Suddenly, the screen goes black, and since I had cleared the phone is nothing left. I can not access Clockwork, or boot up the phone. But I can put the phone in download mode. Should I now flash back to stockrom, and then try Root and put a custom recovery again? I have no idea, please help.
filosofenkalle said:
Hello there. Today, I tried to format my samsung galaxy s3 lte running on an old omnirom nightly. And quite Suddenly, the screen goes black, and since I had cleared the phone is nothing left. I can not access Clockwork, or boot up the phone. But I can put the phone in download mode. Should I now flash back to stockrom, and then try Root and put a custom recovery again? I have no idea, please help.
Click to expand...
Click to collapse
yes, since you cant boot up or go in recovery its the last option to do i guess
Hi all,
I use CM12 from MacLaw in combination with TWRP 2.8.1.0 recovery for about 3 weeks now.
Yesterday the phone didn't respond properly, was very very slow and I basically couldn't use the phone. It felt like the CPU was at 100% all the time, so unlocking the phone, calling and so was nearly impossible. A reboot (battery removal) didn't solve it, also the pin code for the sim card came after a few minutes while usually this will come right after starting.
So eventually I did a factory reset from the menu as I did on other occasions just to get rid of this kind of problems.
Well, right after the Samsung s3 mini logo I get the TWRP logo and it will be stuck in there, I see it blinking every few seconds and that's it. When I connect the phone to USB I hear it connecting-disconnecting every few seconds (bing-bong, bong-bing sound).
After a while I flashed TWRP using Odin again, this didn't give any problem but it will still hang in this TWRP loop.
I found some references to this problem but no real solutions. Someone suggested to use ADB but I don't know how to do that, nor could I find a suitable guide on this.
Can anyone help me? Or is it bricked somehow?? I suspect not, download mode is still working.
Thanks for any help!
As I said in the title. The phone's memory seems to be read only.
I can access the fastboot mode of the phone and issue commands like flashing the recovery but it doesn't seem to update anything on the phone even though I get the "OKAY" message.
My phone is unlocked and until last night I was running CyanogenMod on it just fine. But now I can't flash a new recovery or access it. I have TWRP installed but everytime I try to boot into recovery the phone gets stuck on the logo screen and flashes every couple of seconds.
If I try to start my phone normally I get the cyanogenmod logo on start up (even after flashing stock) and the phone never actually boots up.
Anyone had the same problem before? If you need more details I'll reply ASAP.
My phone is the retail European XT1068 Dual Sim. Thank you in advance for any help.
Same issue here (I'm MrPowerGamerBR on Reddit), the more I read about trying to fix this issue, the more I start thinking "this phone is dead, move on..."
There isn't no fix for this, the only way to fix is replacing the logic board.