Related
Hello out there,
my problem is a bit annoying. Everything is fine if I use my OP3T with Oxygen (4.0.3) and TWRP (3.0.3-1). But I want to use LineageOS with TWRP and cant, because my TWRP isnt working after flashing lineage.
"Normal"-Setup:
- TWRP 3.0.3-1
- Oxygen 4.0.2 or 4.0.3 (doesn't matter)
- supersu 2.79
- Encrypted Device
"Lineage"-Setup:
- TWRP 3.0.3-1
- lineageOS (lineage-14.1-20170214-nightly-oneplus3-signed.zip OR lineage-14.1-20170208-nightly-oneplus3-signed.zip - tried both, doesnt matter)
- supersu 2.79
- openGApps for 7.1 nano
- Encrypted Device
My Problem is, that I can boot up lineage and use it, but if I reboot into my TWRP to flash something or make some Backups, it asks for my encryption-passphrase, it says it is okay and boots into the twrp main-windows. After that I can't touch anything (stuck in mainmenu) and after a few seconds it results into a black screen (plus white LED) and I am forced to reboot the device. After that reboot I have to reconfigure lineage (seems to loose data).
Does anyone have an idea how to fix this annoying "bug"?
Thank you very much!
Atomique
EDIT: I found that Thread after searching for a issue like that in the lineageOS official Thread - I will try this and report! - Thank you! https://forum.xda-developers.com/on.../recovery-official-twrp-oneplus-3-3t-t3543391
I had the exact same problem when I hab LineageOS installed! It would always lose all its data. After flashing and reflashing a hundred times, I ended up reverting my OP3T back to stock using a OnePlus forum guide (I'm a new user, so I can't post the link). I am now back to OOS 4.0.3 but can't even get SuperSU to work. Whenever I flash it (with or without the dm-verity fix) the phone is stuck booting forever.
I found the post you linked to aswell but haven't tried flashing LineageOS using the new TWRP. But I can tell that the new version doesn't help rooting OOS...
Did you have any luck flashing LineageOS by now?
Edit: With the newest Lineage Version I always get an error when trying to flash it. Do you have the same problem? The nightly from two weeks ago seems to work better.
Use latest TWRP 3.0.4.1
nitinvaid said:
Use latest TWRP 3.0.4.1
Click to expand...
Click to collapse
That's what I'm doing... Could the dm-verity be a problem? There are two versions, one with opt and one with force in the name.
Thank you for your replies! The link (TWRP 3.0.4-1) worked like a charme!
@Tafelbomber: I would recommend you to start from scratch. But please be warned: you will loose your data! Make a backup first!
1. Delete everything with fastboot -w
2. Flash the recovery noted in my first post with fastboot flash recovery <twrp-filename.img>
3. Optional: Restart into the TWRP and flash the OOS 4.0.3 to make sure that you have a clean OS installed befor flashing lineage
4. Flash lineage OS + additional ZIPs (like supersu, betterbatterystats, Gapps etc)
5. Clean Dalvik and Cache!
6. Reboot and have fun. --> Sometimes you get problems with the encryption chain (Red Error --> in my case the fastboot -w did it for me)
Good luck - I will close this thread - thanks again for your help!
Atomique
EDIT: I want to close this thread, but I don't know how.
Okay. Am currently on MIUI 11.0.3 (the latest one available for RaphaelIN)
So, the problem am facing is that, when i flash a custom rom, my phone gets rebooted to recovery and sometimes to fastboot(this happens occasionally) and i just simply cant get the rom to load.
Sometimes my phone gets into a state which resembles hardbrick (none of the buttons work, even holding the power button for 10secs doesn't) and after sometimes, usually 15 to 20 mins it restarts itself. This has happened thrice till date and all while booting to system.
The Roms i have tried-
-Pixel experience (unofficial) (android Q)
- Lineage OS 17 (unofficial)
- Havoc OS (both official and unofficial) (both pie and Q versions)
-MIUI (European rom)
I have also tried flashing the chinese, indian and global vendor (all done separately) thinking it was a vendor issue, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking was done through the official method and the official app.
Any solutions for this problem and has anyone faced these problems or is it only me?
Astrek said:
Okay. Am currently on MIUI 11.0.3 (the latest one available for RaphaelIN)
So, the problem am facing is that, when i flash a custom rom, my phone gets rebooted to recovery and sometimes to fastboot(this happens occasionally) and i just simply cant get the rom to load.
Sometimes my phone gets into a state which resembles hardbrick (none of the buttons work, even holding the power button for 10secs doesn't) and after sometimes, usually 15 to 20 mins it restarts itself. This has happened thrice till date and all while booting to system.
The Roms i have tried-
-Pixel experience (unofficial) (android Q)
- Lineage OS 17 (unofficial)
- Havoc OS (both official and unofficial) (both pie and Q versions)
-MIUI (European rom)
I have also tried flashing the chinese, indian and global vendor (all done separately) thinking it was a vendor issue, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking was done through the official method and the official app.
Any solutions for this problem and has anyone faced these problems or is it only me?
Click to expand...
Click to collapse
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
You didn't format data that's why your rom doesn't boot. Follow Robbos nice guide and you are good to go.:good:
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
Thnx for the guide. i will do this within a day or two and update you if it worked or not.
Kollachi said:
You didn't format data that's why your rom doesn't boot. Follow Robbos nice guide and you are good to go.:good:
Click to expand...
Click to collapse
I did format the data partition coz that's one thing I and my friends always do when flashing new rom. I don't exactly remember but i think, the pseudo hardbrick thingy started after i formatted the system, data, cache & internal storage.
I will follow Robbos guide adn keep you guys updated on what happened.
Astrek said:
I did format the data partition coz that's one thing I and my friends always do when flashing new rom. I don't exactly remember but i think, the pseudo hardbrick thingy started after i formatted the system, data, cache & internal storage.
I will follow Robbos guide adn keep you guys updated on what happened.
Click to expand...
Click to collapse
Format data = (you will need to type in "yes")
Note: Format data or wipe data isn't the same thing.
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
Ohhh *****...!!!! It ****ing worked!!!! Though i made some mistakes like clean all and lock in first step, but was able to unlock bootloader almost instantly, no idea why but i can almost instantly unlock certain mi phone's bootloader instantly. But a lot of thanx for taking your time and writing this up... You really saved me from being stuck in MIUI forever!
A lot of thnx.... and also happy new year... 1st day of 2020 went quite well for me all thnx to you and i hope yours goes well too.!
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
thanks for help
but no work for me
after flash rom and reboot booting to twrp auto..
Kollachi said:
Format data = (you will need to type in "yes")
Note: Format data or wipe data isn't the same thing.
Click to expand...
Click to collapse
many times the tiniest msg has the greatest significance. thanks mate!!!
Guys i need your help,, i flashed my phones custom Rom tecno 7cs using sp flashing tool.
That worked and it showed the tick icon on my pc.
The problem is that it does nothing to my phone because the software issues are still there
my phone keeps restarting itself almost all the time and sometimes won't even boot it takes longer to boot,,, apps keep on crushing and many more.AM tired am going to break it and throw it if i don't get solutions asap!
So the flashing process only wiped data on the phone nothing else whatsoever.
tecno 7cs p121 Bi safaricom ke 20151111
Hey,
So after a lot of observation and reading I think LOS 17.1 seems stable enough to be used for a daily driver.
Right now I am on the normal stock ROM, without any modifications, no TWRP, no root whatsoever.
However, I have unlocked the bootloader a few months ago, so that's done already.
Current state of the phone:
Code:
MIUI version: 11.0.1.0 (QFKMIXM) - Is this the global version?
Device model: Mi 9T Pro (128GB, 6GB RAM)
I want to install TWRP, I want to root the phone, I want to install all needed modules for a proper camera etc, I want to install LineageOS 17.1 (latest build) and lastly I want to install Immensity Kernel (latest build) because I have heard it works well with LOS and provides lots of battery improvements.
I did lots of tinkering with my phone a couple years back, but I haven't done so in a while, and neither have I done anything with this device, so to make sure I am not breaking anything I decided its the best to ask here.
What steps do I have to provide in which order? Can someone provide my a detailed explanation of all the needed steps?
Also, can I install MicroG on it, or do I have to use GApps?
My guess is, first TWRP and root, then ROM and then kernel?
Also, I have read about some issues with Magisk and Android 10, is that still a problem, or is that solved by now?
Anything else I need to look out for?
Cheers
KuroRyu said:
Hey,
So after a lot of observation and reading I think LOS 17.1 seems stable enough to be used for a daily driver.
Right now I am on the normal stock ROM, without any modifications, no TWRP, no root whatsoever.
However, I have unlocked the bootloader a few months ago, so that's done already.
Current state of the phone:
I want to install TWRP, I want to root the phone, I want to install all needed modules for a proper camera etc, I want to install LineageOS 17.1 (latest build) and lastly I want to install Immensity Kernel (latest build) because I have heard it works well with LOS and provides lots of battery improvements.
I did lots of tinkering with my phone a couple years back, but I haven't done so in a while, and neither have I done anything with this device, so to make sure I am not breaking anything I decided its the best to ask here.
What steps do I have to provide in which order? Can someone provide my a detailed explanation of all the needed steps?
Also, can I install MicroG on it, or do I have to use GApps?
My guess is, first TWRP and root, then ROM and then kernel?
Also, I have read about some issues with Magisk and Android 10, is that still a problem, or is that solved by now?
Anything else I need to look out for?
Cheers
Click to expand...
Click to collapse
Make sure you are in the latest version of MIUI first.
For TWRP flash the latest Mauronofrio TWRP, he has the official TWRP, but his unofficial, latest version is probably a better option at its a little bit more up to date.
Once you've flashed TWRP you will need to boot immediately in to TWRP without allowing the phone to boot into MIUI, otherwise the phone will detect that recovery had been modified and will restore stock recovery.
When you've booted into TWRP, format data (needs to be format and not only wipe), then wipe cache and dalvik.
Reboot into TWRP, to ensure that the newly formatted data partition is correctly mounted.
Now flash lineage and a GApps package. I've only used Open GApps Pico, but I believe microG should be OK. If you use Open GApps it is still in beta and packages larger than the micro package are likely to cause issues, so stick with micro, pico or nano. (For clarification, micro G is a GApps package, what you are really asking is do you need to use Open GApps or not)
The latest Magisk is fine now. It is recommended to boot into LOS first at least once before flashing Magisk. I can't remember the details but sometimes you may get issues if you flash Magisk after flashing a ROM, without booting to the ROM first. You may be fine if you don't boot the ROM first, but since I've forgotten the reasons and can no longer find it, I now boot the ROM before flashing Magisk, just to be safe.
From here, you should be OK to flash different kernels, personally I've never felt the need to, as I'm happy with the performance of things as they are. My battery life is similar to what it was on stock MIUI. If you want to try kernels other than Immensity, just double check first that it is for AOSP ROMs. There are some kernels that have been created that are only compatible with Stock MIUI.
For the camera, I believe the latest advice for ANX Cam is still version 158 along with the 48MP fix for Q ROMs. There are a few later versions, which are not appropriate for this phone. I don't believe there has been a later version for this phone.
Edit: just noticed your question in the quote.
You have the global version of the phone. AFAIK 11.0.1 is still the latest version of the global version of MIUI.
Robbo.5000 said:
Make sure you are in the latest version of MIUI first.
For TWRP flash the latest Mauronofrio TWRP, he has the official TWRP, but his unofficial, latest version is probably a better option at its a little bit more up to date.
Once you've flashed TWRP you will need to boot immediately in to TWRP without allowing the phone to boot into MIUI, otherwise the phone will detect that recovery had been modified and will restore stock recovery.
When you've booted into TWRP, format data (needs to be format and not only wipe), then wipe cache and dalvik.
Reboot into TWRP, to ensure that the newly formatted data partition is correctly mounted.
Now flash lineage and a GApps package. I've only used Open GApps Pico, but I believe microG should be OK. If you use Open GApps it is still in beta and packages larger than the micro package are likely to cause issues, so stick with micro, pico or nano. (For clarification, micro G is a GApps package, what you are really asking is do you need to use Open GApps or not)
The latest Magisk is fine now. It is recommended to boot into LOS first at least once before flashing Magisk. I can't remember the details but sometimes you may get issues if you flash Magisk after flashing a ROM, without booting to the ROM first. You may be fine if you don't boot the ROM first, but since I've forgotten the reasons and can no longer find it, I now boot the ROM before flashing Magisk, just to be safe.
From here, you should be OK to flash different kernels, personally I've never felt the need to, as I'm happy with the performance of things as they are. My battery life is similar to what it was on stock MIUI. If you want to try kernels other than Immensity, just double check first that it is for AOSP ROMs. There are some kernels that have been created that are only compatible with Stock MIUI.
For the camera, I believe the latest advice for ANX Cam is still version 158 along with the 48MP fix for Q ROMs. There are a few later versions, which are not appropriate for this phone. I don't believe there has been a later version for this phone.
Edit: just noticed your question in the quote.
You have the global version of the phone. AFAIK 11.0.1 is still the latest version of the global version of MIUI.
Click to expand...
Click to collapse
Do I also need the force encrypt file? Some people mention it needs to be flashed too?
How do I properly install twrp? I boot into fastboot mode, and then I can flash it, I assume?
In the thread it also states that one should first flash vbmeta?
EDIT: Ok, I flashed vbmeta and twrp, booted into twrp, formated data and wiped dalvik and cache.
Now should I flash LOS next and then gapps ..? Which GApp package is the right one for 17.1? It is not linked in the LOS thread?
I've read that some people had issues when flashing the wrong gapps package
EDIT2: Ok, so far I have persisted TWRP and installed magisk. I flashed LOS 17.1 (latest build) and booted into it. I did not flash gapps yet as I dont know which gapps package to use. Also I would prefer to use microG if possible, but I dont think its possible to install it easiely? If it is, please let me know.
Now, the issue is, for some reason after the clean install of LOS17.1 I still see google apps like google drive (remember, I did not flash gapps). This shouldn't be the case? I did format data and cleared dalvik and cache, so it is a bit weird that this happens...
Also I constantly get "android.process.media keeps stopping" .. I assume that is because some applications try to access google service, which are not correctly available? What did I do wrong?
So my questions are:
1) Is it possible to use microG (opensrc implementation of google services), rather than gapps? If so, how?
2) If I need to use GApps, which one to flash?
3) Why were google apps still present on my device after flashing and formatting data ..?
KuroRyu said:
Do I also need the force encrypt file? Some people mention it needs to be flashed too?
How do I properly install twrp? I boot into fastboot mode, and then I can flash it, I assume?
In the thread it also states that one should first flash vbmeta?
EDIT: Ok, I flashed vbmeta and twrp, booted into twrp, formated data and wiped dalvik and cache.
Now should I flash LOS next and then gapps ..? Which GApp package is the right one for 17.1? It is not linked in the LOS thread?
I've read that some people had issues when flashing the wrong gapps package
EDIT2: Ok, so far I have persisted TWRP and installed magisk. I flashed LOS 17.1 (latest build) and booted into it. I did not flash gapps yet as I dont know which gapps package to use. Also I would prefer to use microG if possible, but I dont think its possible to install it easiely? If it is, please let me know.
Now, the issue is, for some reason after the clean install of LOS17.1 I still see google apps like google drive (remember, I did not flash gapps). This shouldn't be the case? I did format data and cleared dalvik and cache, so it is a bit weird that this happens...
Also I constantly get "android.process.media keeps stopping" .. I assume that is because some applications try to access google service, which are not correctly available? What did I do wrong?
So my questions are:
1) Is it possible to use microG (opensrc implementation of google services), rather than gapps? If so, how?
2) If I need to use GApps, which one to flash?
3) Why were google apps still present on my device after flashing and formatting data ..?
Click to expand...
Click to collapse
There is no need to flash force encrypt files or vbmeta.
I have never used MicroG so couldn't give any answers about that, however Open GApps are open source too. For android 10 it is still in beta. The beta files can be found here https://sourceforge.net/projects/opengapps/files/arm64/beta/20191209/. Pico is the smallest package that gives Google Play, personally I recommend going with that, then installing any other Google stuff from the play store, should you want them.
No idea why you would be seeing Google apps. I can only suggest formatting data again in TWRP.
If that doesn't work I would start again. Fastboot flash the latest MIUI 11.0.1 global ROM, boot into it once, there is no need to go through the set-up. Then go through the steps given before.
This time don't flash vbmeta, it is not needed.
The fastboot ROM can be found here http://bigota.d.miui.com/V11.0.1.0....M_20191111.0000.00_10.0_global_11d3a1700a.tgz
Edit:
Having seen some of your other posts, I'll give you some more info.
vbmeta is mainly used to persist TWRP. However flashing Magisk will persist TWRP and flashing a custom ROM will persist TWRP. You would only need to flash vbmeta if you wanted to stay on MIUI and not use Magisk. (There are other uses for vbmeta, but you don't need them, so I'll not go into them)
Is widevine L1 available on the ROM? Is the FOD working well?
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
therightperson_630 said:
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
Click to expand...
Click to collapse
Don't know what your doing wrong, but this is my failsafe method should nothing else work.
Flash the latest Chinese 11.0.5 fastboot ROM. Make sure you don't lock the bootloader if using the Mi Flash Tool.
Boot into MIUI once to allow it to finalise the install, you don't need to do the initial phone setup once it boots into MIUI.
Boot into fastboot and install TWRP. I recommend the latest from mauronofrio which should be 3.1.1-32
Boot immediately into TWRP. I use the volume up button while powering up the phone.
Perform a factory reset in TWRP (using the swipe button), then format data (need to type 'yes' to confirm).
Reboot into TWRP using the TWRP boot menu, this ensures the newly formatted data partition is correctly mounted.
Copy over the ROM you want and GApps if needed, then flash.
Boot into your new ROM, everything should be OK. Then boot back into TWRP to install Magisk if you want root.
Yep that seems to have done the trick. At first I was getting frustrated because I thought I was downloading the right Chinese ROM, turns out I was downloading the recovery version instead of the fastboot one.
I think it wasn't working because I was on the beta channel. Switching over to the stable channel meant I had to go through a fastboot flash apparently. I've seen this before on my OP3.
Got lineage OS loaded, thanks for your help!
(Im spanish, sorry if my english has errors or is really bad )
Hi, i've got a problem, I spent all day trying to fix a wrong rom installation but nothing works.
I was using Revolution Remix 8.6.2 and I wanted to try the new official hentaiOS, so I made a complete twrp backup of everything and I copied it to my computer, I wiped system, data, dalvick, and cache, and I flash hentaiOS rom zip. It was a normal bootloop so I just wiped all and restored the backup, but it didnt work (System had magisk with some modules but nothing happend in the previous reboots), so I rebooted into recovery to flash the clean RROS zip and try restoring only some parts of the backup to see which partition was causing the bootloop, but I was unable to boot into recovery, I used mi flash with miui 12 fastboot rom, it worked so I flashed TWRP again and tried to install RROS but nothing works.
I already tried with RROS 8.6.2, 8.6.1 and 8.6.0 but no one works, now Im gonna try with ArrowOS (It didn't work) but I want to use RROS, what can I do?
Xsoft32 said:
(Im spanish, sorry if my english has errors or is really bad )
Hi, i've got a problem, I spent all day trying to fix a wrong rom installation but nothing works.
I was using Revolution Remix 8.6.2 and I wanted to try the new official hentaiOS, so I made a complete twrp backup of everything and I copied it to my computer, I wiped system, data, dalvick, and cache, and I flash hentaiOS rom zip. It was a normal bootloop so I just wiped all and restored the backup, but it didnt work (System had magisk with some modules but nothing happend in the previous reboots), so I rebooted into recovery to flash the clean RROS zip and try restoring only some parts of the backup to see which partition was causing the bootloop, but I was unable to boot into recovery, I used mi flash with miui 12 fastboot rom, it worked so I flashed TWRP again and tried to install RROS but nothing works.
I already tried with RROS 8.6.2, 8.6.1 and 8.6.0 but no one works, now Im gonna try with ArrowOS (It didn't work) but I want to use RROS, what can I do?
Click to expand...
Click to collapse
I found the way to boot RROS, I flashed the vendor of the lineageOS post
(Link: https://forum.xda-developers.com/k20-pro/development/rom-lineageos-17-0-t3976469 )
and after that I flash RROS 8.6.0, once it boot I reboot to recovery and started updating it.
Hope this info is useful for someone