Database Develop

FRP

I had recently bought a lg g4 off ebay with FRP lock I was able to bypass the screen using the pop up when you try to sigh in at locations such as McDonalds. I was also able to root the device. the problem I still have is when I try to use any google service it will prompt me to give email. I tried hard reset and when I go to settings there is no way to reset it. And I was also able to unlock the camera

Install twrp flash a stock rom or custom sign in with your Google account, if you cant install twrp I personally don't know how to help but someone on here will help you out

cyan pac said:
Install twrp flash a stock rom or custom sign in with your Google account, if you cant install twrp I personally don't know how to help but someone on here will help you out
Click to expand...
Click to collapse
I tried but my boot loader is locked and I don't know how to unlock it

I flash a official kdz on LG G4 H815L and now I can pass by google FPR.....
You can help me with an advice please HOW can you bypass that screen FPR?
Thank you so much!

ahzs6455 said:
I tried but my boot loader is locked and I don't know how to unlock it
Click to expand...
Click to collapse
what model is your device?

Nobody can give me a Solution for bypass lg h815?

cyan pac said:
what model is your device?
Click to expand...
Click to collapse
LG-H811 is my model number

You can unlock your bootloader in dev options and root is the tmo forums, if you get that working you can flash a custom stock rom in twrp and your device won't have any lock I believe, if that doesn't work I'm not quite sure on how to help you further

the only option is use one of the services on ebay. there is many over there offering this service.

can you help me please

here is a solution.
calil said:
can you help me please
Click to expand...
Click to collapse
i found same lg and was unable to get into the settings by doing the accessories-talk back etc.......what i did do was enable quickview so that i can dual screen two apps, i went on google and typed settings to this phone, or download the samsung bypass either is fine and takes you to settings......so what you do is once you get into settings go to display and in the top right corner click tab view. then go to home screen and change it to the reg screen. once you do that, go to one drive in your google folder thats standard install. once there it should either give you the option to add and should register your email acct as original user.....i may also add it was rooted as well.
at setup click accessories->enable switch acess->turn on->if you get the screen that gives you the option to use one or two switches click two so you cab select and confirm which button volume + or vol- does when pushed.......-> now now go to the settings of switch access-> assign switches-> and scroll down to overview-> highlight-> either vol+ or vol--> once done go back to setup--->push until you get dual screen option-----and follow my earlier long ass speach.......side note been at it two weeks lmao

calil said:
can you help me please
Click to expand...
Click to collapse
Can u not just remove the google account itself in settings? Or does it ask you for password as well?

Reactivation Lock Bypass (Samsung Account)

Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
1. On the setup wizard (after factory wipe), connect to internet (wifi/data)
2. Select "Emergency call"
3. Call to any valid number (112 for example)
4. When the calls start swipe to the left on the dialing screen and you will see message and browser displayed (in my case the message method doesn't works).
5. Select browser.
6. Go to google.
7. Search for Package Disabler Pro 9.8
8. Download it and install it.
9. Open it and search for "Samsung account".
10. Click on Clear Data and then Disable.
11. Go back to google and search for QuickShortMaker
12. Install it and open it.
13. Search for "Setup Wizard", it will expand.
14. Select the one with ".setupwizards.SetupExitActivity"
15. Done! You can now use the phone and restart.
Ok after this you can go and check that there is no Samsung account displayed (Settings>Accounts), buuuuut, you can't add it . What I did was:
1. Go back to Package Disabler Pro and enabled "Samsung Account".
2. Then go to Settings>Back up and reset
3. Factory data reset
4. Asked for Samsung account and I inserted my real account.
5. Done, now I can sync with my account.
The oooooooonly issue that I can't figure out it's the way to remove the "Reactivation lock" from Settings>Lock screen and security>Find my mobile.
Well that's all hope it works for you guys.
If this doesn't work for you, you can check out unlockjunky, they will definitely be able to do it.
Good luck!!

xxspokiixx said:
Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
4. When the calls start swipe to the left on the dialing screen and you will see message and browser displayed (in my case the message method doesn't works).
Click to expand...
Click to collapse
when i'm calling i cannot swipe to the right. Is there anyother way to open the browser?

112
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks

xxspokiixx said:
Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
Click to expand...
Click to collapse
Mate, you are an absolute legend! I've been searching for 8hrs looking for a solution after hard resetting my phone and being unable to get past the Samsung Account lock afterwards (even though I had the right username & password!) About fifty useless/outdated YT videos & a few hundred websites/forums later - none of which were helpful, I finally stumbled across your post, despite it not showing up 8hrs ago when I came straight to XDA hoping to find a solution first.
I have an improved method for #2, 3 & 4 of your post and will add all relevant info soon (just need some kip now that the panic is over). I'll also expand a little on some details and include further options which worked in my particular case, but all n'all - you're an absolute legend mate and I'd be screwed & still panicking without your shared info. Huge thanks...

Nice meme dude ya got me

Nomak1835 said:
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks
Click to expand...
Click to collapse
AGREED!!!!!!!!! DO NOT DIAL 112!!!!!! It switches to 911... not a funny joke

Nomak1835 said:
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks
Click to expand...
Click to collapse
You have to dial an emergency number or this trick doesn't work. Its not practical for most folks but if you are worried about dialing an emergency number I'd recommend using a SIM out of a tablet that isn't phone number enabled.

its working for j7 prime bypass samsung account

Hi, First of all thanks for this thread. i made it to #8 but when i download the apk and i cant figure out how to install it to complete steps 9 and 10. Maybe i'm over looking something im not sure but i need help.
TIA

Beasy936 said:
Hi, First of all thanks for this thread. i made it to #8 but when i download the apk and i cant figure out how to install it to complete steps 9 and 10. Maybe i'm over looking something im not sure but i need help.
TIA
Click to expand...
Click to collapse
Look for Aptoide apk download it to sd card and search for package disabler in this app and install it or download and copy Pachkage disabler you your sd card and run via file explorer or download and run ES File manager as I did.

when i make the call my wifi gets turned off and wont come back on till i restart the phone. i managed to open the browser but the wifi is off so i cant do anything after that except cry.
stock 5.0

Did you get it figured out I got the edge 6 plus to work fine now it was one of the tougher ones and I've done a few on some newer models what are you stuck on?

I thought the Combination Firmware would reset the FRP lock by default after being installed.

first thank you for sharing ur experience and i want to add
that i done it step by step and it works nicely but still cant remove the reactivation
and here is how iv done it after i bypassed it using ur method
i flashed a lower modem file from stock rom N910VVRU2BOG5 which is 5.0.1
at this point my imei went off
so i went for full flash by N910VVRU2BPA1_N910VVZW2BPA1_N910VVRU2BPA1_HOME. which is 5.1.1 and did full hard reset
then i just signed in with the last Samsung account i used with ur method earlier and it passed so now i can easly remove reactivation mark , unlock and root then make it Arabic .
thx again

Did you ever post up the suggested steps to replace #'s 2-4 in the original post above? I'm not seeing them anyplace. This would be a big help. Thanks.

When I call I can't swipe to the right is there another way to open browers

I successfully used this to gain access to my phone but I believe that if I power cycle it I will be locked out again. Is there any way to remove or change the samsung account now that I am in? The options are greyed out in settings.

ADB and Root.
Hey, I have been working on these for a while keep finding new things each time I try to remove Reactivation Lock. However I was wondering if I show you guys how to enable ADB with RSA Key, and Root the device. Could someone show me how to remove the Reactivation Lock using root. I used other methods on older and newer models, but these S5's are the only ones giving me issues.

After weeks of going mad trying different solutions I've found online, here's what worked 100% for me just last night:
Login to Samsung Account on other device, select Password & Security, enter password then choose Devices. LOG-OUT of your S6 Edge if listed, confirm. Next change password - doesn't matter what, can even change it back afterwards.
Flash Lollipop (I used G925VVRU4BOK7)
Wipe Data/Cache
Boot fresh Stock firmware, enter/confirm network details, at Reactivation Lock prompt, enter user & updated password. Sign-in....
Settings -> Lock Screen & Security -> Find My Mobile. Unselect Reactivation Lock and enter password... voila!
Works for anybody else??

when i made the call the wifi turn of

Bootloader Unlock (Developer Option Bug)

Hi. Today I found a bug in my Nokia 5 allowing me to enable OEM Unlock in the Developer Option Settings. Please note that I am on the new Android Pie with the latest April security patch. So here is what I did:
1. Please enable Developer Option on the Settings menu. If you already did so, skip this.
2. Now, on the Developer Option, you can see the OEM Unlock is greyed out. To toggle the switch on, "you need to disable and re-enable the Developer Option toggle switch at the top of the menu".
3. After then, you can now freely toggle the OEM Unlock switch. You will be prompted then to enter your device password and voila! OEM Unlock is now enable.
4. To switch it off, you just need to do the steps over again.
That's all. I hope this helps. Sorry, I might have posted this in the wrong section cause I am a new member and just wanted to fill my share to you.

Hey there! been lurking xda for ages but your post just made me register! Thanks a lot for sharing mate.
I just downloaded the update and tried this method, worked fine. Btw there's a new security patch as latest update (5/19), didnt bother doing it as they could have patched it probably.
So, i tried flashing twrp and noticed it still wouldn't let me and flashing get_unlock_ability returns 0. Did you manage to get past this?

This actually works. Havent flashed anything yet, as I'm scared of bricking it.
I just love the good old days when I had the Tmobile G2x with the Nvidia chip, flashed the darn thing so many times, even bricked it numerous times, but I was able to go into recovery and reflash it again. That phone was "Flash and Brick Proof"

thanks for sharing, spent countless hours trying to fix with usb driver setups and cmd lines from other tutorials.
question is what's next?

That's a dummy command,
You still need to properly Unlock it, I'm afraid all the options are paid service
Sent from my Xperia 1 using XDA Labs

This thing still works as now it's may 11th 2020.
I'm I ready to unlock bootloader now?

alexben_007 said:
This thing still works as now it's may 11th 2020.
I'm I ready to unlock bootloader now?
Click to expand...
Click to collapse
Try fastboot oem unlock

Mod edit - translated by https://www.deepl.com/translator:
Unlock the bootloader
****************************
Разблокировать загрузчик -358536084114397 -nokia5_nd1

I am N.E.E.T said:
Hi. Today I found a bug in my Nokia 5 allowing me to enable OEM Unlock in the Developer Option Settings. Please note that I am on the new Android Pie with the latest April security patch. So here is what I did:
1. Please enable Developer Option on the Settings menu. If you already did so, skip this.
2. Now, on the Developer Option, you can see the OEM Unlock is greyed out. To toggle the switch on, "you need to disable and re-enable the Developer Option toggle switch at the top of the menu".
3. After then, you can now freely toggle the OEM Unlock switch. You will be prompted then to enter your device password and voila! OEM Unlock is now enable.
4. To switch it off, you just need to do the steps over again.
That's all. I hope this helps. Sorry, I might have posted this in the wrong section cause I am a new member and just wanted to fill my share to you.
Click to expand...
Click to collapse
pretty usefull tip bro, it worked on my nokia 6 TA-1000

[Solved] SM-G781W Snapdragon Qualcomm (Canadian - Version) How to Boot on 'Bootloader Unlock Menu' ???

Hi!
I'm on Android 12 with SM-G781W, january update but i'm blocked at the first step of any tutorial ... lol
The S20 FE have a unlock bootloader menu when keep pressure on Vol + at the first screen on 'Download Mode' when i have 3 choice but it's not work on SM-G781W version.
* I obtain the 3 choice screen only if i wait 10 sec before booting in download mode or if i boot whit vol -+ (Not the power button) while plugging USB cable otherwise boot donwload mode normaly whit 2 options*
Problem 1 : I try to install today the latest Magisk Canary but the pop-up for create the magisk_patched.img are not showing, and magisk are installed directly. No img images are create anywhere.
--------------------------------------------------------------------------------------------------------------------------------
Problem 2 : This options "OEM unlock" is never Showed on any Qualcomm XAD (CAD) canadian version In Dev Mode... i have the shame problem on the S9+ too
Problem 2 : This phone are different chipset whit not bootloader unlock menu and are not unlockable ... but appenrently rootable ?!?!?
-------------------------------------------------------------------------------------------------------------------------------
And i try to flash 781U version all work great but the options 'OEM UNLOCK' have not appeared lol ...
I have tried too a combination file but this have bricked the phone and finaly i have flashed the XAD latest firmware whit odin patched 3.14
I cannot flash any thing modded
How i can load on this new Unlock bootloader menu or installing magisk or twrp, on this phone please any idea...???

the US and Canadian versions don't have a regular bootloader unlock option.
garbage advice deleted

3mel said:
the US and Canadian versions don't have a regular bootloader unlock option.
normally I'd say you have zero chance to unlock, however I recently saw this on telegram and I'm curious if it works...
"US/Canada devices has no oem unlock toggle!
How to get OEM Unlock option back for Non US/Canada device?
1. Open the Settings app. Tap on General Management → Date and time.
2. Use the toggle button to disable Automatic date and time.
3. Set date option will be enabled now. Tap on it, and set the date to about 10-20 days earlier.
4. Enable developer options.
4.a Go to your device Settings.
4.b Select ‘About phone’ » tap seven times on ‘Build number’.
└ This will enable Developer options under Settings.
4.c Go back to Settings » scroll down to the bottom and you’ll see Developer options menu.
5. Open developer options (in the Settings app itself), and find the option called ‘Auto update system‘. Use the toggle button to disable it.
6. Now, go back to the main screen of Setting, and then tap on Software update.
7. Disable the option ‘Download updates automatically‘.
8. Tap on ‘Download updates manually‘ option, but it will give you an error because of the wrong date, so it’s fine.
9. Restart the device.
10. Go to Settings > Developer options. The OEM unlock option should be enabled now."
Click to expand...
Click to collapse
Returned SM-G781W (Canada) model today back to the **** hole factory it came from.
I tried the above steps and DO NOT work, they also come shipped with BL 3 or something and 0 chance of rooting, if they DO happen to come with BL 1/2 then you root I think.

K2silver said:
Returned SM-G781W (Canada) model today back to the **** hole factory it came from.
I tried the above steps and DO NOT work, they also come shipped with BL 3 or something and 0 chance of rooting, if they DO happen to come with BL 1/2 then you root I think.
Click to expand...
Click to collapse
yeah that's on me, I wasn't reading that recommended approach right. it's meant for people who have lost the toggle not for people who never had it... sorry fella.

Thank's 3Mel .. your align my research
Ok for Canadian model is the chipset on the motherboard of the phone are not the shame as anywhere because it's sale whit sim unlock by default for XAC version ... the difference is physical

Question SM-G998B DS / SM-G998BZKGPLS missing oem unlock

Hi, (sorry long question)
My screen has small black spot in the upper right corner, I have been desperately trying every method available online to hide the notch or resize the screen but nothing works.
Overscan ( doesn't working anymore)
Hide notch in dev mode (Samsung removed it)
Nacho notch and other apps (not convinet)
Changing resolution using cmd (blacks big portion of the screen up and down as well)
Now I am trying to root the device to hide the notch using magsik but oem unlock in dev mode is missing tried changing the time and date method but didn't work, then tried installing different region rom (CSS-AP-BL-CP) but still no oem unlock and the rom still shows the carrier logo.
Is there any method to hide the notch without root?
Is the bootloader for my device unlockable?
Thank you for your support

patrapatra said:
Hi, (sorry long question)
My screen has small black spot in the upper right corner, I have been desperately trying every method available online to hide the notch or resize the screen but nothing works.
Overscan ( doesn't working anymore)
Hide notch in dev mode (Samsung removed it)
Nacho notch and other apps (not convinet)
Changing resolution using cmd (blacks big portion of the screen up and down as well)
Now I am trying to root the device to hide the notch using magsik but oem unlock in dev mode is missing tried changing the time and date method but didn't work, then tried installing different region rom (CSS-AP-BL-CP) but still no oem unlock and the rom still shows the carrier logo.
Is there any method to hide the notch without root?
Is the bootloader for my device unlockable?
Thank you for your support
Click to expand...
Click to collapse
It's a Exynos device, so the bootloader should in theory be unlockable.
Changing the ROM region won't enable OEM unlocking.
My recommendation: Perform a factory reset, connect to the Internet via wifi, then check for updates in system settings. Then, check to see if OEM unlocking is available.

V0latyle said:
It's a Exynos device, so the bootloader should in theory be unlockable.
Changing the ROM region won't enable OEM unlocking.
My recommendation: Perform a factory reset, connect to the Internet via wifi, then check for updates in system settings. Then, check to see if OEM unlocking is available.
Click to expand...
Click to collapse
Thanks for your replay.
I tried several times but still same issue