Hello,
I'm trying to un-brick my rog phone 2 with QFIL however everytime I'm trying to restore the firmware I got an error that the QFIL can't read the UFS (I've switched the QFIL to UFS in seetings for sure) also the miflash showing the same error
So I thought that I may have a damaged UFS however I can flash a raw file without a problem and I also unlocked the bootloader via EDL which could read the UFS without any problem and I unlocked the bootloader from EDL mode as I can't access the software yet!
So what's the problem in QFIL and Miflash and why they can't read the UFS but I managed to unlock the bootloader from EDL and the UFS is accessable with this tool but not accessable in miflash or QFIL
Also I did a raw flash but it's also reboot to EDL everytime I try to boot it.
Related
Hello,
I was running unlocked bootloader and pixelexperience rom. Today I wanted to try to flash latest xiaomi.eu and now my phone is bricked.
Steps:
Twrp -
flashed data (after that i saw that i had an error and data didn't flash)
installed rom (because i didn't see the error) - rom failed to install
flashed data again from twrp advanced option
phone rebooted and now it bootloops on mi logo. i do not have recovery nor fastboot.
what can I do in this situation? i searched the forum but there is nothing similar
You must have fastboot, check how install miui using mi flash. I use this method and working for me
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Andrei221 said:
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Click to expand...
Click to collapse
Exact same issue, no fastboot or EDL mode. Tried updating the latest Miui 11 - Android 10 - Xiaomi EU Rom (Jan 25th) and the phone has been bricked.
Solution Deleted.
got into EDL mode using test points, but now i have edl auth error - "cannot receive hello packet"
Seems like a common problem for bricked devices and need mi account with the right edl auth privileges.
Any help welcome.
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
DoYouWantFriesWithThat said:
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
Click to expand...
Click to collapse
you know hoe to bypass EDL authorization?
Leoleo96 said:
you know hoe to bypass EDL authorization?
Click to expand...
Click to collapse
No. I've tried different things:
- trying to flash with QPST in EDL mode (9008)
- trying to flash fastboot roms with various/ancient versions of MiFlash in EDL mode (9008)
- flashing standalone modem firmwares (old ones, new ones, non-ARB ones, packed with NON-HLOS, etc.) from TWRP
- doing a MITM on the response that MiFlash & MiFlash PRO get from https://update.miui.com/updates/miotaV3.php
- doing a MITM on MiFlash and redirecting requests to old URLs (https://update.miui.com/updates/miotaV2.php, https://update.miui.com/updates/miota.php) and black-box testing them
- using MobileEdit Forensic tool to exploit the EDL firmware
*Note*: I've obviously tried all the different FireHose programmers that are floating around (including those distributed by MobileEdit).
Nothing works.
Especially trying to modify the response (if one understood its format) could very well be useless because it could be that the response from update.miui.com is validated directly by the firmware itself (like a challenge-response authentication) - this has to be verified.
The only possibility I see for now is to flash the original Xiaomi Recovery, let it connect to MiFlash Pro (choosing option n.3 from the menu), and then using IdaPro to trick MiFlash Pro into telling the Recovery to flash the phone. It shouldn't be hard, and I think it *MIGHT* offer the possibility to bypass ARB & Authentication (but I might be wrong: it might be equivalent to flashing from Fastboot). That waits to be tested.
I hope this saves y'all from wasting time.
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
tarkusy said:
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
Click to expand...
Click to collapse
Any suggestion to un-brick mi8 and not mi8Lite?
I don't understand how to bypass EDL Account only coping a file on images folder
I recently brick my k20 pro I was in twrp I formated my data I think some how I wiped the entire system.anyways I'm now hard brick with a black screen no recovery no fastboot option. When I connect the phone to then PC it shows up as (Qualcomm hs-usb qloader 9008). I didn't do the test point method, that's how it automatically reads. I tried the using mi flash tool but get errors ( will attach screen shots) any guidance will be greatly appreciated. I don't mind paying for some help.
Is your device unlocked?
Have you downloaded and installed the drivers that cam with the mi flash tool?
Can you access fasboot mode by holding power down ?
Try and make sure there are no spaces in the file name you created.
Ex:* miui11globalromfastboot firmware (= bad)
* Miui11globalromfastboot.firmware (= good)
https://forum.xda-developers.com/k20-pro/how-to/xiaomi-mi9t-k20-hard-brick-recover-t4037591
Could try this ^.
Alternatively XiaomiTool might do the trick.
https://www.xiaomitool.com/
After installing the latest Pixel Experience, my phone keeps rebooting to twrp logo, and fastboot can't recognize device. Please help.
If the solution is edl mode, Is there any possible way to go into edl mode without disassembling device?
Edit: My pc magically able to recognize my device, then i boot to TWRP, wiped everything (except internal storage), flashed PE. Change slot then flash FBE disabler and magisk, then my phone is booting normally.
i'm having the same problem too. i believe my phone's partitions got corrupt since the log says that /sys/class/android_usb/android/0/state doesn't exist. can't really take my phone to a service center since, well, we don't have any of those in our vicinity
Fastboot oem edl. Try that and then miflash on fastboot
Jemec26 said:
Fastboot oem edl. Try that and then miflash on fastboot
Click to expand...
Click to collapse
can't really do that since my pc doesn't detect the phone. i've tried edl but my pc doesn't detect the phone either.
Device not detecting in fastboot mode
i tried flashing with edl still device is not detecting with fastboot mode
Hi.
i hard-bricked my Redmi 9T while trying to flash a custom rom
i cant boot into recovery or fastboot, i only see "Qualcomm HS-USB QDLoader 9008" in the device manager when i connect the phone
when i try to flash the stock rom using MiFlash i get an error saying my account is unauthorized
i googled it and apparently what i need is a patched firehose file to bypass this authorization check, or get someone with an authorized account to help
i searched a lot but never found a patched firehose that works for my phone
if someone can give me some directions as to where i can find this file or how to patch the original myself, that would be great
Thanks!
Edit:
I ended up paying a russian guy to help me flash with an authorized account
he is MOD EDIT: Content Removed if anyone is wondering
i also contacted the guy.. didn't avail his services
but he passed my scam mockup.. he is legit..
Just buy Miracle Xiaomi Tool Login Edition and flash all rawprogram xml in edl (9008) mode
is there any free solution for this? i'm broke af and i have the same problem
same problem
AhmedSamir72 said:
same problem
Click to expand...
Click to collapse
hmmm...i dont own thhis device but i think u can try this way by miflash
First of all, ur device have to have the BL unlocked. Maybe also 9008 works.
download the stock ROM from here
remember to scroll down and download the .tgz file
after it finished, extract it
and open miflash (recommend version)
select to the folder u just extracted, and refresh (f in fastboot with BL unlocked, it shows ur device number; if in 9008, it shows as COM port.)
choose erase all (don't lock)
then just press flash
Hi, If you entered the engineering firmware mode (EDL) and can not flash the phone without a service account:
1. Download the firmware from here ENGINEERING ROM
2. Check that the device would be defined as Qualcomm HS-USB QDLoader 9008 in the device manager when connect the phone
3. Firmware using MiFlash engineering rom from paragraph 1
4. Loading to engineering rom
5. Overload to Fastboot mode
6. We flash the rom you need through Miflash
chiron001 said:
Hi, If you entered the engineering firmware mode (EDL) and can not flash the phone without a service account:
1. Download the firmware from here ENGINEERING ROM
2. Check that the device would be defined as Qualcomm HS-USB QDLoader 9008 in the device manager when connect the phone
3. Firmware using MiFlash engineering rom from paragraph 1
4. Loading to engineering rom
5. Overload to Fastboot mode
6. We flash the rom you need through Miflash
Click to expand...
Click to collapse
this method will damage imei ,best way is to find the No auth firehorse and replace it with the one inside firmware folder,then use miflash
I found a thread where he made a firehose programmer for this device.
Here's the link: https://forum.xda-developers.com/t/solved-i-need-help-edl-9t-lime.4385727/
I had soft bricked redmi 4 mobile with locked boot loader, I could go to mi recovery 3.0 and fastboot etc. I tried to flash santoni 10.3 rom via fastboot mode but couldn't flash it with "critical partition error" due to locked bootloader. Then I entered edl mode by shorting test points, then successfully flashed rom with clean all option via miflash tool 'santoni_10.3 global', mobile started well and i used it 2 days. It shows ota updates available of 11.0.2nammixm in setting's updater. I downloaded it and after rebooting it left me mi recovery 3.0 and then I choosen reboot to system and got suck on mi logo again. It means i softbricked device again with locked bootloader. This time i again tried edl mode with miflash tool but it gives error "object reference not set as an object ". Don't know hot fix it. I tried 2 different miflash tool versions, both the fastboot roms "santoni 10.3 global" and "santoni 11.0.2 global" to flash, but getting that error again and again.
Sorry for my bad english.
Please help me, I can go into fastboot mode and edl with port 'qhsusb 9008 com10'
Crying...
Problem resolved,
I got revived again my redmi 4 mobile.
Solution is to try any older rom and older version of mi flash tool.
Suggestions-
Use santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz
And miflash-20220218 or miflash-20170425
Use Edl mode if you have locked bootloader,
Fastboot mode if having unlocked bootloader.
I will update my successes report if get managed to switch on miui 11 (currently having miui 8).