Related
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.
I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm
I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt
If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .
and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then
Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?
Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..
Hello everyone, I have the problem, that my 3T boots to recovery every time I boot. The system is no more booting. What I did was, "updating" in the CM about/update menu (from unofficial cm14.1 13.12. to 14.12. ).
So maybe an open recovery script was created and booted to bootloader. Update failed but I did it manually.
From now on the phone does just only boot twrp recovery (or is it a boot loop ?). I tried to restore a backup and install the oxygen os via zip and wiped all partitions (except internal storage) but nothing helps. Does anyone know this and can give me advice ? Thank a lot in advance.
Edit:
For the OnePlus One if found an error report which look a little bit my error:
The problem is suspected to stem from the "persist" partition getting corrupted during the reboot, even though CyanogenMod doesn't use this particular location. The damaged area doesn't get fixed like other partitions because a filesystem integrity check isn't ran. It's left corrupted, and even though the area isn't needed for the OS to run, the OnePlus One boot loops anyway.
Click to expand...
Click to collapse
But the partition layout on the 3T seems to be different, I can see only partitions like sda etc ...
same here
Called the 1+ support and they sent me the same file like in this post http://forum.xda-developers.com/oneplus-3t/help/unbrick-unbrick-tutorial-oneplus-3t-t3515306 They offered me a telephone support slot in 2 days, but I tried myself, now the default system is booting again. If you need assistance write I can guide you as best as i can.
Good luck to you.
sniperle said:
Called the 1+ support and they sent me the same file like in this post http://forum.xda-developers.com/oneplus-3t/help/unbrick-unbrick-tutorial-oneplus-3t-t3515306 They offered me a telephone support slot in 2 days, but I tried myself, now the default system is booting again. If you need assistance write I can guide you as best as i can.
Good luck to you.
Click to expand...
Click to collapse
Thank you!
Enviado do meu ONEPLUS A3003 através de Tapatalk
Thnaks so much
sniperle said:
Called the 1+ support and they sent me the same file like in this post http://forum.xda-developers.com/oneplus-3t/help/unbrick-unbrick-tutorial-oneplus-3t-t3515306 They offered me a telephone support slot in 2 days, but I tried myself, now the default system is booting again. If you need assistance write I can guide you as best as i can.
Good luck to you.
Click to expand...
Click to collapse
:good:
I follow your recommendation thanks for your assistance I fixed my OP3T,
What a mess ... after all this I wanted to install my CM backups again, but TWRP refused to boot. I had only a black screen with a white LED when going to recovery. But now after some hours I have a solution to this. You need to update Oxygen OS before going on !!
Make a full system update or flash this update via TWRP: http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_3.5.3/
After this TWRP is booting as expected.
Now I'll enjoy a beer or two or ....
Good luck to all others. If anybody needs assistance ... contact me.
never had a issue
Please help!!!! I tried flashing the update for the latest OTA, I had the full zip. I have unlocked bootloader, twrp, phh supersu, magisk and xposed. I did a nandroid backup and then clicked Wipe- Dalvik and Cache. I then flashed the zip. For 20 mins the boot logo was spinning around, so I rebooted into twrp to see what was going on. Now I can't reboot and it shows no data, it says my device is encrypted and I can't see any files. What can I do??
Was your internal storage encrypted before ?
TWRP doesn't show your internal storage and didn't ask for a password ?
fix bootloop
Boot into your recovery [Vol+ and Power]
Connect your phone to your PC
Execute the following fastboot command on your PC (More informations on fastboot)
Code:
fastboot continue
Your phone will start right away. :good:
I solved the problem
OK what i did was when the phone was starting and vibrating I push the power bottom and volume down bottom at the same time ,then i connected the phone to the PC,from the panel in the phone there are 3 categories to erase everything on the phone I did it all(1,2,3) and then I put the phone in ADB mode from the control panel in the phone,After that I flash via fastboot the original .zip from one plus for the version 4.0.3 (1.4 GB) ,when it finished I restarted and the phone started normal again,I hope this help someone alse,I was so desesperated:silly:.
RE
TOMASITO95 said:
OK what i did was when the phone was starting and vibrating I push the power bottom and volume down bottom at the same time ,then i connected the phone to the PC,from the panel in the phone there are 3 categories to erase everything on the phone I did it all(1,2,3) and then I put the phone in ADB mode from the control panel in the phone,After that I flash via fastboot the original .zip from one plus for the version 4.0.3 (1.4 GB) ,when it finished I restarted and the phone started normal again,I hope this help someone alse,I was so desesperated:silly:.
Click to expand...
Click to collapse
how ? can you please teach me ( my op3t didn`t go to system is says " md5 checksum failed , recovery failed , boot failed , system failed , boot_aging failed , dsp failed , modem failed please help me (
Change USB port
Try a different USB port. I flashed it through a 2.0 USB port instead of the 3.0 and no checksum error!
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
Hi guys my new victim is Alcatel 1 5033f (1/16).
1. I had opened the bootloader with a pc tool but I didnot think about dm verity... so my phone first going in orange state, with 5sec warning. (i was have fastboot....then)
2 I have tried remove the warning with "lk.bin flashing in fastboot" It wasnot succesful I made some mistakes because my screen is shows only lines... and no fastboot its allways rebooting after a few seconds.
After this I try to restore with sp flash tool, but I didnot finded EXACTLY this rom. Somebody told me that 5033a is also good then I downloaded all necessary files and try to flash but I allways have a "brom cmd fail 00003 and I cant do.
I started this project without any overthinking off course I didnot made any backup.
So I know this is a cheap phone but new... can somebody help me in sp flash progress?
MrWienerberger(brick) said:
Hi guys my new victim is Alcatel 1 5033f (1/16).
1. I had opened the bootloader with a pc tool but I didnot think about dm verity... so my phone first going in orange state, with 5sec warning. (i was have fastboot....then)
2 I have tried remove the warning with "lk.bin flashing in fastboot" It wasnot succesful I made some mistakes because my screen is shows only lines... and no fastboot its allways rebooting after a few seconds.
After this I try to restore with sp flash tool, but I didnot finded EXACTLY this rom. Somebody told me that 5033a is also good then I downloaded all necessary files and try to flash but I allways have a "brom cmd fail 00003 and I cant do.
I started this project without any overthinking off course I didnot made any backup.
So I know this is a cheap phone but new... can somebody help me in sp flash progress?
Click to expand...
Click to collapse
Hi, did you make any progress? I also have Alcatel 1 5033F with vRB3V (11-04) ROM. If you can advise how to make the backup of the ROM, I can send it to you.
I tried installing crDroid (unlock bootloader, uploaded FW, recovery SHRP, then install ROM) and after reboot the phone would go back to recovery.
By mistake I "installed" SHRP from ZIP package (I thought I need to install latest recovery file to install ROM with android 12) and phone went into reboot loop, I can't do anything, any key combination doesn't help - I can't even turn it off.
help!
I opened the phone, disconnected the battery, but nothing happened - still bootloop
I'm planning to use SP Flash Tool
Immediately after connecting USB C, the phone boots into bootlop (after disconnecting and reconnecting the battery)
What happens when you flash the custom ROM?
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
U can also try to flash it with MI flash tool.
Sergij-SApcPro said:
What happens when you flash the custom ROM?
Click to expand...
Click to collapse
Operation completed with status [ ]. It looks like there should be a * in the middle and then it would be a sign to me that the ROM is loaded.
Sergij-SApcPro said:
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
Click to expand...
Click to collapse
At the time of writing, no key combination was working - I can't get into Fastboot or Recovery. I let the battery run out for that moment.
Sergij-SApcPro said:
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
Click to expand...
Click to collapse
Sergij-SApcPro said:
U can also try to flash it with MI flash tool.
Click to expand...
Click to collapse
That's what I'll do first, then move on to the solution below.
I opened the phone and disconnected the battery, but plugging in the USB cable immediately turns the phone on and bootloops again.
I'm using Linux and Windows, and one user hinted at hacking the USB driver so I believe it won't boot the phone, only then will I have communication? Other than that I don't know how to do it anyway.
For now, after the phone's battery runs out, I'll try with this solution
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
I've exhausted the battery, Mi Flash needs Fastboot, which I don't have.
I used
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
I got to the point of connecting the phone to the computer and it connects (the procedure says to use the Power button, but I had to disconnect the battery because Bootloop was falling in), using the Vol- button - the phone keeps connecting and disconnecting....
For a while I tried to connect the phone via SP Flash under Linux - in administrator mode the message "memory protection violation" appears (I don't know how the message is in English).
Adding a udev exception was supposed to help - after lsusb the Mediatek device appeared, I added the exception, restarted - and the same thing happens (the program crashes).
I finally managed (with the help of a group on telegram https://t.me/HelioG85_Unified) by switching off the phone and carefully going through all the points (except the update at the very end) from this link
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
There is a little problem, because SP Flash must be from the link in this post (because it will not fit DA)
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
Wow so many posts... Did you manage to fix the phone now? What do you mean by SP Flash will not fit the DA? Did you download the eng ROM for Lancelot? BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Sergij-SApcPro said:
Wow so many posts...
Click to expand...
Click to collapse
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Sergij-SApcPro said:
Did you manage to fix the phone now?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
What do you mean by SP Flash will not fit the DA?
Click to expand...
Click to collapse
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Sergij-SApcPro said:
Did you download the eng ROM for Lancelot?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Click to expand...
Click to collapse
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Great to hear that you fixed the phone, congratulations!
TomekParuszewski said:
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
Thanks for the info, but I don't need to flash it with SP Flash tool because that was earlier when I didn't try to install custom recovery. Now I have SHRP with CRDroid A12 and its Awesome.
Thanks for reading,
Bye
TomekParuszewski said:
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Yes
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Yes
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
SandShadow said:
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
Click to expand...
Click to collapse
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
voland34 said:
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
Click to expand...
Click to collapse
The battery trick does'nt work for me. I can't remember exact version, sorry - but my way was going BACK with SP Flash tool version (from newest to working with file). When I found right version the rest was only going with procedure.
I did it twice: first time I was scared, second - with finding right version of SPFT, every time - like walk in the park. Looong walk all procedure was like 2-3 hours.
Second one try was after trying to load Andorid 13 (2x). Don't do it kids!
After all, my Revolut app stop working lately on my phone and Redmi is retired for now... (and also becoming unusable because slowing dramatically)
Thanks for your answer. it has worked with battery empty (though that might not have benn necessary); not on 1st atttempt v5.2020 but it did with version 5v.2216 in case it might help someone...it didnt flash miui fastboot rom 12.5 but it did flash engineering rom. and from there i will twrp and miui.
Thanks for your suggestion of trying different spflash versions.