Database Develop

gps location for contacts

I have been searching all overr and I'm yet to see am amswer for my question? So I've cdcided to post it on the best site for htc phones. is there a way aside from the app, Pinpoint to show where you are? I mean like what I want to do is have google maps app be able to save my location and adress using the gps and allow me to save it to a contact so that this way next time I want to get to my aunts house for example I can just go to her info click adress and voila. It has a route sshowing me the route.

A strange sense of deja vu washed over me reading this, I was thinking exactly the same thing a few hours ago.

Being able to save GPS information for contacts would be something of great importance considering the devices capabilities, apps like AndNav2 could then use contact GPS co-ordinates for quick navigation, the same could be said of google maps and other applications that use GPS information.

Ageless Stranger said:
Being able to save GPS information for contacts would be something of great importance considering the devices capabilities, apps like AndNav2 could then use contact GPS co-ordinates for quick navigation, the same could be said of google maps and other applications that use GPS information.
Click to expand...
Click to collapse
Can't you just save an address to the contact and then click on get directions? Or does the location have no street address?

Well yeaah that too. I was thinking of that but the thing is, my cousins house doesn't show up through maps. But it tells me the coordinates using GPS and yeeah it can still give me directions like that. Soo yeah, its sort of a half and half.

For locations without street addresses, you can still map them using lat/long coordinates. Just enter the coordinates into the address field as x,y. For example, 1600 Pennsylvania Ave would be entered as 38.89767967065576, -77.03656196594238

The My Maps Editor application might be of some use too. Basically it lets you display and edit custom maps (which means overlaid graphics on actual google maps) on the G1. Since these overlays are static, it won't route you from an arbitrary location. However if you want to see a hiking path from say a fixed street address out to a lake in the middle of the woods, this could help.
http://googlemobile.blogspot.com/2008/12/your-maps-in-your-hands-for-holidays.html

jashsu said:
Can't you just save an address to the contact and then click on get directions? Or does the location have no street address?
Click to expand...
Click to collapse
AndNav2 uses OpenStreetMap for it's navigation and metadata retrieval, and currently the UK post code search is limited to a few post codes (Zip codes). Most of my contacts won't show up. It will get better in time.....

Thanks Jashsu. Really, Like That really does help and is a very good substittue for an app. But yet another, question, Is It just my phone or Is it Google Maps, THat has a bug, When i know im home and i just want to mess around and activate gps and see my location. And it shows me some where 20 blocks away, lol i hate that!!!!

Elloco305 said:
Thanks Jashsu. Really, Like That really does help and is a very good substittue for an app. But yet another, question, Is It just my phone or Is it Google Maps, THat has a bug, When i know im home and i just want to mess around and activate gps and see my location. And it shows me some where 20 blocks away, lol i hate that!!!!
Click to expand...
Click to collapse
it's a google maps issue, which really screws with me when tryin to use Locale. i had a situation set to put my phone on silent if it is between 2 am and 12 pm AND i am at home, but since it thinks i'm about 1/4 mi away it hasn't worked yet.

tubaking182 said:
it's a google maps issue, which really screws with me when tryin to use Locale. i had a situation set to put my phone on silent if it is between 2 am and 12 pm AND i am at home, but since it thinks i'm about 1/4 mi away it hasn't worked yet.
Click to expand...
Click to collapse
The more powered off the gps is when you attempt to access it (and also the worse your direct view of the sky is) then the longer it will take to get a good gps lock. If you habitually turn the gps function off (or you have a program that automatically does it) then every time you turn the gps on, it has to perform a cold start. This means it will take between one and five minutes to get a bead, depending on the number of satellites your phone can see at the time.
If you use gps often then don't turn it off. The amount of power saved by fully unpowering the chipset is not worth the amount of power it consumes fully cold starting every time you need it (not to mention the time wasted waiting for it to get a bead).
If you used the gps function and then left the gps-using application or put the phone into standby, the gps chipset remains in standby. The next time you access the gps, it will be considered a warm start and will take between 1-30 seconds, depending on various factors.

Auto-start GPS recieve when using Google Maps...Possible?

OK..Hope this is the proper place to post this...
I am horrible at remembering to charge my phone, thus I don't keep GPS on at all time because of battery drain. However, I find it frustrating that every time I start Google maps that I have to enable the GPS. It seems to me that there should be a function built into that app which would enable the user to have it automagically enable the GPS reciever on the apps start up. To my knowledge this isn't possible but I feel it would be very useful. So, does anyone know how one would achieve this? Would it be possible to write a script that would accomplish this?
Thanks in advance for the input.

Menu button, Settings, Security & Location, set "Enable GPS satelites"

if you enable gps it wont actually turn on until you open google maps or a location based program (you will see a satellite dish at the top letting you know if it is on). the gps setting basically just tells the phone if a program requests gps location it is okay to turn the gps antenna on.
otherwise its off and battery doesn't get affected

Thanks...
Hey dk75 & averma, thanks for the posts. I should really read the fine print on some of these menu options prior to asking these questions...oops!

Hello!
My wife and me use latitude (from google) to see where we are on Google maps. Latitude works best if the GPS is on. HOWEVER, we just need to see each other on google maps when we are driving home (between 17:00 and 18:00). If i turn on the gps, latitude will eat the battery the whole DAY...) I would like to know if there is a way to schedule the activation of the gps...

pbecks1963 said:
Hello!
My wife and me use latitude (from google) to see where we are on Google maps. Latitude works best if the GPS is on. HOWEVER, we just need to see each other on google maps when we are driving home (between 17:00 and 18:00). If i turn on the gps, latitude will eat the battery the whole DAY...) I would like to know if there is a way to schedule the activation of the gps...
Click to expand...
Click to collapse
Try looking up "Locale" on the market. App isn't free, but most of the plugins for it are, and you can combine the functions of the plugins to do almost anything.
I use it for exactly what you're talking about myself.

Google Maps doesn't Auto-start GPS
Hi all,
I know this thread is pretty old but hoping for a reply all the same. I'm using the Galaxy S in the Uk with Google Maps & Navigation. I used to have the HTC HERO running maps & navigation and whenever I started either of those apps, the little atenna would appear to show that it was trying to find a gps position.
However, on my Galaxy S, whenever I start Maps or Navigation nothing happens. Even though I have "use wireless networks" and "use GPS satallites" both checked.
I cant imagine that technology would have taken a step back from such a useful feature and it is really irritating having to remember to disable/enable GPS (using SwitchPro home screen widget) before being able to use Maps or Navigation.
Anyone have any ideas how to fix this??

Install Tasker app and create a profile that enables GPS when you run Maps app.

tasker
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic

[TUT] Enable GPS automatically for Maps
[email protected] said:
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic
Click to expand...
Click to collapse
i have spent sometime now lurking behind the scenes in this group and
have read, in detail, my share of the posts. Make no mistake, the
guys here are experts and being experts their methods/explanation
often goes way over the head of the typical noob. this post is to
introduce this wonderful application of tasker to the inimitable
noob. i hope my effort would ease someone's labour.
imagine this scenario: you switch on maps on your phone and keep
wondering why it does not show your precise location and then it hits
you! you did not switch on your GPS. this post explains how to create
a profile that switches on your GPS automatically when you fire up
maps.
Just remember this: Profile is the context i.e. what you want to do.
in the present case, you want to first start maps and when maps is
started you want to switch on GPS. then when you exit maps, you want
GPS to be switched off. this is the object.
Stage 1: In profile tab click the + sign. give a name like 'MAP'.
this name will identify the profile that is currently active. after
you name it press the green tick and you are shown several options
like application, time, day etc. Now maps come under applications, so
press applications and all the appliations in your phone are
displayed. scroll down and select maps and press the tick mark. at
this stage you have told tasker that whatever you want to do revolves
around maps.
Stage 2: Now that you have hinted to tasker about the application
that is to be run, we should next state what should happen when the
appliation is started. after you press the tick mark you will be
shown a window asking for task selection. press new task and give it
a name like switch on GPS.
Stage 3: after baptising the task, you will be taken to a broad
window . press the + mark on the bottom left and the confusion
begins. a pletora of options is thrown at you (this is why tasker is
so darn powerful). this is called the 'select action category'.
digressing a little here you should know that google has changed
something with android and you cannot in the usual course toggle GPS.
so you should download an app called 'secure settings' (from google
play) and install it. once it is installed open it and it gives you an
option to install a helper. install the helper also. this activates
the GPS option.
Stage 4: once that process is completed, come back to tasker and get
yourself to the 'select action category'. here press on plugin and
then on secure settings. in the next window, touch 'edit' and then
scroll down to GPS and touch it. three options are displayed viz. on,
off and toggle. choose on and press the floppy disk icon to the
bottom left. press the tick mark and again press the tick mark. at
this stage you have succeeded in activating GPS when maps is started.
however, when you exit maps you find that GPS does not switch off by
itself.
Stage 5: to make it switch off by itself, you need to create the same
task again. just long press on the task which has already been
created (called here as switch on GPS) and you are presented with
several options. select the first one - 'add exit task' and follow
the process as in stage 4. however, instead of choosing 'on' select
'off' this time. once this is done come out and test it.
Stage 6 - and the most important - Feel happy and satisfied.
i am sure there should be some easier way to do this. however, in my
limited understanding of tasker this was how i did it. i really am
confused about the variables. i hope someone will help. when i say
confused, i should clarify that i have no inkling of what it does. :
( could someone tell me where to read up on it? i have searched on
google and i havent found any satisfactory explanation.
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM

the power of automation
capaxdoli said:
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM
Click to expand...
Click to collapse
Thank you for your post, I wouldn't be able to do it without you man!
I have a question. I'm using LBE security master which monitor my firewall, wifi, adware, etc. is there a way for tasker to check in LBE firewall and toggle my wifi/data when I want it? instead of creating a new profile for ON/OFF wifi. I just want it to look in my app and see what app has permission to what and allow/un-allow.
Thanks again!

[email protected] said:
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic
Click to expand...
Click to collapse
Yes is does autostart if you want with tasker..
Verstuurd van mijn GT-I9000 met Tapatalk

You can use the "Auto-Enable GPS for Maps" application, which switches both WiFi and GPS on when you launch Maps, Navigation, Local or Latitude, and restores them to their old state (e.g. switched off) when you quit these apps.

capaxdoli said:
i have spent sometime now lurking behind the scenes in this group and
have read, in detail, my share of the posts. Make no mistake, the
guys here are experts and being experts their methods/explanation
often goes way over the head of the typical noob. this post is to
introduce this wonderful application of tasker to the inimitable
noob. i hope my effort would ease someone's labour.
imagine this scenario: you switch on maps on your phone and keep
wondering why it does not show your precise location and then it hits
you! you did not switch on your GPS. this post explains how to create
a profile that switches on your GPS automatically when you fire up
maps.
Just remember this: Profile is the context i.e. what you want to do.
in the present case, you want to first start maps and when maps is
started you want to switch on GPS. then when you exit maps, you want
GPS to be switched off. this is the object.
Stage 1: In profile tab click the + sign. give a name like 'MAP'.
this name will identify the profile that is currently active. after
you name it press the green tick and you are shown several options
like application, time, day etc. Now maps come under applications, so
press applications and all the appliations in your phone are
displayed. scroll down and select maps and press the tick mark. at
this stage you have told tasker that whatever you want to do revolves
around maps.
Stage 2: Now that you have hinted to tasker about the application
that is to be run, we should next state what should happen when the
appliation is started. after you press the tick mark you will be
shown a window asking for task selection. press new task and give it
a name like switch on GPS.
Stage 3: after baptising the task, you will be taken to a broad
window . press the + mark on the bottom left and the confusion
begins. a pletora of options is thrown at you (this is why tasker is
so darn powerful). this is called the 'select action category'.
digressing a little here you should know that google has changed
something with android and you cannot in the usual course toggle GPS.
so you should download an app called 'secure settings' (from google
play) and install it. once it is installed open it and it gives you an
option to install a helper. install the helper also. this activates
the GPS option.
Stage 4: once that process is completed, come back to tasker and get
yourself to the 'select action category'. here press on plugin and
then on secure settings. in the next window, touch 'edit' and then
scroll down to GPS and touch it. three options are displayed viz. on,
off and toggle. choose on and press the floppy disk icon to the
bottom left. press the tick mark and again press the tick mark. at
this stage you have succeeded in activating GPS when maps is started.
however, when you exit maps you find that GPS does not switch off by
itself.
Stage 5: to make it switch off by itself, you need to create the same
task again. just long press on the task which has already been
created (called here as switch on GPS) and you are presented with
several options. select the first one - 'add exit task' and follow
the process as in stage 4. however, instead of choosing 'on' select
'off' this time. once this is done come out and test it.
Stage 6 - and the most important - Feel happy and satisfied.
i am sure there should be some easier way to do this. however, in my
limited understanding of tasker this was how i did it. i really am
confused about the variables. i hope someone will help. when i say
confused, i should clarify that i have no inkling of what it does. :
( could someone tell me where to read up on it? i have searched on
google and i havent found any satisfactory explanation.
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM
Click to expand...
Click to collapse
How to enable the location settings along with the GPS ON task?

NAvigation ??

Hi just wanted to know if the Hd 7 has navigation like turn by turn with voice like google android..
I went to maps but it only seems to show direction to destination.
no turn by turn and no navigation , unless i am not doing something, I really like this feature in the android phones so hope they do it on windows
I do have a htc hero so dont tell me go by an android phone

The only one I know if is TeleNav, and its $10 a month.

tfn said:
Hi just wanted to know if the Hd 7 has navigation like turn by turn with voice like google android..
I went to maps but it only seems to show direction to destination.
no turn by turn and no navigation , unless i am not doing something, I really like this feature in the android phones so hope they do it on windows
I do have a htc hero so dont tell me go by an android phone
Click to expand...
Click to collapse
The only app so far that I have seen that does verbal turn by turn navigation is the TeleNav app, but I really don't want to pay $10 a month for that, and I still have a regual GPS in the car for now, although it does need new maps it work for the time being.
As for turn by turn without verbal cues there are a few ways to accomplish this, one is Bing maps, it will give you turn by turn directions. Also you can create tiles for internet sites like Mapquest, and Google Maps, just open the site in your browser and go to the get directions page, then what I have done is zoom into the logo on the page with the name and in the lower right corner tap the three dots and a menu will appear that gives you the option to "pin to start" which then creates a tile on your start page that links directly to that page and the image on the tile is the zoomed image of the webpage's title where you zoomed in.
Hopefully in the coming months there will be more option for navigation apps, and verbal turn by turn, the OS is still very new and everyday there seem to be many new apps. Time and patience will tell.

T-Mobile / Telekom has Navigon select for free

Issue with Tasker not performing correctly when using Google maps.

On my S7 edge, I have Tasker setup usibg Auto Notification to have menus pop up while navigating to allow easy switch between music and navigation screens. For some reason, this causes Tasker to not monitor switching between apps properly, and some plugins like autoshare and even auto notification don't work properly. Tasker basically doesn't work right for several minutes and then it finally catches up and everything starts happening at once. I could really use help with this, it's annoying when Tasker does things 30 minutes after it was supposed to happen at the wrong times.

Is "use reliable alarms" set to always?

Tyler2265 said:
On my S7 edge, I have Tasker setup usibg Auto Notification to have menus pop up while navigating to allow easy switch between music and navigation screens. For some reason, this causes Tasker to not monitor switching between apps properly, and some plugins like autoshare and even auto notification don't work properly. Tasker basically doesn't work right for several minutes and then it finally catches up and everything starts happening at once. I could really use help with this, it's annoying when Tasker does things 30 minutes after it was supposed to happen at the wrong times.
Click to expand...
Click to collapse
My heaviest Tasker use is in my car mode....always navigating with Google Maps. I have a ton of profiles which monitor both apps and notifications to make many decisions...with some extremely complex tasks attached.
Everything usually works fine. But sometimes I make a bad task that loops indefinitely, or I have a root or accessibility problem, or for some reason an error occurs in my programming....those kinds issues usually cause major lag or profiles don't fire at all.
I would think that Tasker itself is probably performing as expected and there is an error (or a method that could be better) in your profiles. My advice is to save a run log and review line by line.
Sent from my SM-G955F using Tapatalk

Reliable alarms was set to never. Could that have been my issue? I know for a fact it's Tasker that's the problem cause when I go into Tasker after being on the home screen it still thinks I'm in the maps app. Or the music app. I've reviewed all my tasks very carefully.

Tyler2265 said:
Reliable alarms was set to never. Could that have been my issue?
Click to expand...
Click to collapse
I think it's likely. Try it and see if things improve.

ktmom said:
Is "use reliable alarms" set to always?
Click to expand...
Click to collapse
ktmom said:
I think it's likely. Try it and see if things improve.
Click to expand...
Click to collapse
Didn't end up changing much, at least not yet. See I have a profile for Google maps, Google Music, and home screen so that whenever one of these becomes active, I get a flash popup telling me what app is open. Whenever I start navigation it's like Tasker stops monitoring which app is open. Autoshare stops working too. Whenever I go to use an autoshare action, I get an error. But then that action ends happening later on, even after it gives out an error. I'm not sure what to do.

Maybe you're experiencing a reported conflict with google play services as described in this thread

ktmom said:
Maybe you're experiencing a reported conflict with google play services as described in this thread
Click to expand...
Click to collapse
Not sure. It only seems to happen when Google maps is running but even when I do big tasks E.G moving big files using ES File explorer, still seems to cause tasker to struggle. So I'm not sure what to think but I wish it would work properly.

Question Weather widget on lockscreen

My Pixel 7's weather widget on the lock screen would be useful if it got my location right.
Every time I tap it, it shows the weather for 'My Location', but it thinks I'm in Greater London. Thing is I'm about 160 miles away in South Wales.
I've got all the location permissions set to allow, in Google etc.
I can add my real location as a saved one, but it fails to take this as default.
With Google maps, it picks up my location correctly, so I can't see why the widget doesn't.
Any info as to make it work correctly.
Thanks
Edit stock Android 13 with latest update

Most of the time mine won't even show up, consider yourself lucky!

ldeveraux said:
Most of the time mine won't even show up, consider yourself lucky!
Click to expand...
Click to collapse
It does disappear completely sometimes

MrPeaski said:
It does disappear completely sometimes
Click to expand...
Click to collapse
Between that and metadata completely broken for me, kinda regretting this phone.

This seems to have fixed itself!
This morning the widget still thought I was in Greater London, but now it finds me correctly!
Android Device Policy got updated via the Play Store ( I have auto update off as a couple of apps lose functionality when on their latest versions), and when I used the Assistant (long press on home button) it needed a download and asked me to sign in.
Since then it appears to work
Another quirk to this is if on mobile data (4G in my area) I asked the assistant "where am I ", it came back as Greater London, repeating this on when connected to my home WiFi it replied "Cardiff", which is approx 20 miles away, a lot closer but still a bit off.
Re-testing this and its the same