Hi,
I bought from a person a watch 5 pro model SM-R920X, but it seems it's stuck in demo mode.
Is there anything i can do to remove demo mode ? Maybe with ODIN?
Thanks in advance!
If I'm not mistaken, then the model with the letter X is the Live Demo Units. That is, it's not just a Demo Mode, but a Demo device for the store. And it needs to be reflashed. But the question is, is there the necessary firmware for this. As far as I remember, even on the Galaxy Watch 4 version, the firmware appeared a year later !!!
I succesfully removed Demo Mode on my Watch5 Pro, PM if someone needs solution.
roytone said:
I succesfully removed Demo Mode on my Watch5 Pro, PM if someone needs
Click to expand...
Click to collapse
Hey bro, could u help me? I already know how to put in download mode and tested with mine (I wrongly boughted on internet the LDU)
roytone said:
Eu removi com sucesso o modo de demonstração no meu Watch5 Pro, PM se alguém precisar de solução.
Click to expand...
Click to collapse
De amigo como voxe conseguiu retirar o live demo LDU?
To nessa busca tambem!
If someone has the rom of Watch5 PM me please
If someone has the rom of Watch5 PM me please
Click to expand...
Click to collapse
I wrote you few dayS ago... you have only to check your Conversation... right upper corner....
Best Regards
adfree said:
I wrote you few dayS ago... you have only to check your Conversation... right upper corner....
Best Regards
Click to expand...
Click to collapse
Hi there, I have the same issue I was wondering if you guys have figured it out. TiA
roytone said:
I succesfully removed Demo Mode on my Watch5 Pro, PM if someone needs solution.
Click to expand...
Click to collapse
Buddy, you saved my life!
roytone said:
I succesfully removed Demo Mode on my Watch5 Pro, PM if someone needs solution.
Click to expand...
Click to collapse
Hi there.. I was wondering if you could help me,
Thanks in advance
eddy_macedo said:
Buddy, you saved my life!
Click to expand...
Click to collapse
Sorry guys. i was offline. So did you solved?
roytone said:
Sorry guys. i was offline. So did you solved?
Click to expand...
Click to collapse
I havent been able to get it out, could you help me?
Watches doesnt have DEMO Flags on any such enabled as Phones.
Just find the correct firmware - and flash it using NetOdin.
Since NetOdin we have is old, You may have to edit the firmware as 1 TAR file to flash.
roytone said:
I succesfully removed Demo Mode on my Watch5 Pro, PM if someone needs solution.
Click to expand...
Click to collapse
Pm sent.
roytone said:
I succesfully removed Demo Mode on my Watch5 Pro, PM if someone needs solution.
Click to expand...
Click to collapse
Save me...
Boot to recovery and then reboot I think might work
So people, here is the solution for your Watch 5pro:
1. Download the firmware itself and unpack the archive with it. After unpacking the archive, the firmware file will weigh about 3.6 GB.
2. We transfer the watch into bootmod. To do this, hold down both buttons for 7-9 seconds until the Rebooting ... message appears and immediately press the upper button 2 times.
2.1. In the menu that appears, select the “Download (Wireless)” item with a few clicks on the top key and confirm the selection with a long press.
2.2. After that, you will see the Wireless-downloading menu. The default will be WPS mode, change it to AP mode by double-clicking the upper button. The watcg is ready for flash.
3. The watch has created a WiFi access point - we connect to it.
3.1. Open NetOdin and wait a couple of seconds until the watch's IP address appears at the top left.
3.2. Click on the AP button in the Netodin software and select the firmware file (unpacked from the archive). We are waiting for the software to process the file.
3.3. Before pressing the Start button, it is important to make sure that the watch is charged more than 60-70% (50% will be enough but not less).
Are you charged? Then click Start and wait for the download to finish.
The process itself takes about 20-30 minutes. At the end of the firmware, the watch should reboot, and PASS should appear in NetOdin.
Watch5 Pro firmware
Video instruction
If you have questions please ask.
xXxMadaraxXx said:
Save me...
Click to expand...
Click to collapse
Samsung Galaxy watch 5 pro stuck in demo mode
Hi, I bought from a person a watch 5 pro model SM-R920X, but it seems it's stuck in demo mode. Is there anything i can do to remove demo mode ? Maybe with ODIN? Thanks in advance!
forum.xda-developers.com
roytone said:
So people, here is the solution for your Watch 5pro:
1. Download the firmware itself and unpack the archive with it. After unpacking the archive, the firmware file will weigh about 3.6 GB.
2. We transfer the watch into bootmod. To do this, hold down both buttons for 7-9 seconds until the Rebooting ... message appears and immediately press the upper button 2 times.
2.1. In the menu that appears, select the “Download (Wireless)” item with a few clicks on the top key and confirm the selection with a long press.
2.2. After that, you will see the Wireless-downloading menu. The default will be WPS mode, change it to AP mode by double-clicking the upper button. The watcg is ready for flash.
3. The watch has created a WiFi access point - we connect to it.
3.1. Open NetOdin and wait a couple of seconds until the watch's IP address appears at the top left.
3.2. Click on the AP button in the Netodin software and select the firmware file (unpacked from the archive). We are waiting for the software to process the file.
3.3. Before pressing the Start button, it is important to make sure that the watch is charged more than 60-70% (50% will be enough but not less).
Are you charged? Then click Start and wait for the download to finish.
The process itself takes about 20-30 minutes. At the end of the firmware, the watch should reboot, and PASS should appear in NetOdin.
Watch5 Pro firmware
Video instruction
If you have questions please ask.
Click to expand...
Click to collapse
Hello, where can I download the rom package of samsung watch 5? Where is the download source? Where did you download the rom package, plz
adfree said:
I wrote you few dayS ago... you have only to check your Conversation... right upper corner....
Best Regards
Click to expand...
Click to collapse
hello i need samsung watch 5 rom, plz send to me
Related
Hi Everyone,
You can download the Global customized ROM and Hong Kong ROM in version LT15i_3.0.A.2.181
Flash Tool and the tutorial:
http://se.it168.com/thread-1872934-1-1.html
1. Download for LT15i_3.0.A.2.181_Global_Customized.ftf
- added option of silent for the camera shutter sound.
http://u.115.com/file/f3cda36363
----------------------------------------------
2. Download for LT15i_3.0.A.2.181_HongKong.ftf
http://u.115.com/file/f3667ac99f
---------------------------------------------------------------
source from http://sebbs.it168.com/thread-1873472-1-1.html
Anything special with this Rom compared to SEUS?
Added games and apps?
vegetaleb said:
Anything special with this Rom compared to SEUS?
Added games and apps?
Click to expand...
Click to collapse
has the option of closing camera shutter sound.
I must have the same FW already because I can choose sound off in camera
I am very deceived by the lack of games though, only had Golf game
I have tried flashing the Global Custom fbf with my HK unit but it gives an error saying that it cannot be flashed... anyone has any ideas?
Error Logged as below:
kazuni said:
error logged as below:
Click to expand...
Click to collapse
I have flashed the global firmware successfully.
you need to:
1. Unplug your phone
2 turn on debugging option under "application -> development" and turn on the "unknown source" option
3. Turn off your phone
4. Run this flashtool and press "flash" button to select the firmware file
5. While pressing the back button and then connect your phone with pc via usb until the flashtool start flashing
Scott4 you have another link, saying 3 days to download with speed of 4.5 Kb/s
punkmonkey1984 said:
Scott4 you have another link, saying 3 days to download with speed of 4.5 Kb/s
Click to expand...
Click to collapse
I can't help you on this and I won't help impolite people, be careful of your words
scott4 said:
I can't help you on this and I won't help impolite people, be careful of your words
Click to expand...
Click to collapse
I was not trying to be impolite, was stating that i cant download as it takes so long, sorry if i offended you.
punkmonkey1984 said:
I was not trying to be impolite, was stating that i cant download as it takes so long, sorry if i offended you.
Click to expand...
Click to collapse
people born after 80's really don't know politeness.
anyway, install that udown downloading program and then the firmware with IE then.
Even though you may think so, politeness is not a quality reserved for people born before 1980. Just because a unit was inpolite, or wasn't but you received his post that way, doesn't mean everyone can be put into the same bag.
I will reupload the firmware soon.
scott4 said:
people born after 80's really don't know politeness.
anyway, install that udown downloading program and then the firmware with IE then.
Click to expand...
Click to collapse
I was born in 1984 hence the name Punkmonkey1984 !!!!, im sorry if you thought that i was being impolite, im not going to keep defending myself, i was just saying that the download speed was slow, and if you had another link available,
And thanks for the info on how to download, but it has the same slow speeds.
lollylost100 said:
Even though you may think so, politeness is not a quality reserved for people born before 1980. Just because a unit was inpolite, or wasn't but you received his post that way, doesn't mean everyone can be put into the same bag.
I will reupload the firmware soon.
Click to expand...
Click to collapse
And thanks for re-uploading.
I can't detect the driver, as attached screenshot. so i browsed to
C:\Program Files (x86)\Sony Ericsson\Sony Ericsson PC Companion\Drivers\CurrentSigned\x86x64
and it showed a whole list, which should i use?
Just point it to the folder.
Obviously there is. but there are multiple choices, the cloesest one should be sa 1012 and sa 1011 USB ADB interface, but neither of them works.
The issue is that, the device reported as VID_0&FCE&PID_ADDE, in which the whole folder's INF files, none of the INF has that particular driver.
Please find the attached image for your reference. Thank you so much!
p.s. I guess the screen cap is a bit too small. Basically I searched for ADDE as a string in all the INF files in that driver folder, none of it showed up.
Are you holding the 'back' key to connect?
Yes I did. I am pretty sure that I know what I am doing, as I had played with android phones since G1 for at least 10+ devices. I did hold the back key, and the device did show up as "S1 download" in device manager. However, the driver cannot be installed successfully (I had installed PC companion)
-I had installed PC Companion
-I had connected my phoen to this pc before and it syncs properly
-I had turned on debug mode
-I had hold the back key.
-I had done IMEI unlock successfully on this L15i (S1 bootloader)
I have no idea why I can't find the right driver.
Just wondering, if it is possible to give me your device ID under device management? it's osmethign like the attached screenshot:
\\
Try Sony Ericsson Update Service. I found it a lot more reliable than PC Companion.
I don't have an Xperia arc.
Hi,
I always found it saddening to notice EZCast5G (the "original") is updated at first and their knock offs are updated way later (as of writing this, there is 16602000 for EZCast5G, 16403000 for MiraScreen5G).
The update tool let's you easily analyze the update process. And if you fake the reply from this URL with (for example) miniweb to always dish out latest EZCast5G firmware then your knock off will become an original.
These are the requests made for a legit EZCast5G and a MiraScreen5G:
Code:
[COLOR="Purple"]curl http://www.iezvu.com/upgrade/ota_rx.php -d "{\"version\":1,\"vendor\":\"ezcast5g\",\"mac_address\":\"authorshxj\",\"softap_ssid\":\"000000-00000000\",\"firmware_version\":\"16602000\"}"[/COLOR]
[COLOR="Blue"]curl http://www.iezvu.com/upgrade/ota_rx.php -d "{\"version\":1,\"vendor\":\"am8252_nand_mirascreen\",\"mac_address\":\"authorshxj\",\"softap_ssid\":\"000000-00000000\",\"firmware_version\":\"16403000\"}"[/COLOR]
These are the official replys where you need to always dish out the first one and the update tool will do the rest:
Code:
[COLOR="Purple"]{"ota_conf_file":"http://cdn.iezvu.com/upgrade/ezcast5g/ezcast5g-16602000.conf","ota_fw_file":"http://cdn.iezvu.com/upgrade/ezcast5g/ezcast5g-16602000.gz","ota_enforce":true}[/COLOR]
[COLOR="Blue"]{"ota_conf_file":"http://cdn.iezvu.com/upgrade/am8252_nand_mirascreen/am8252_nand_mirascreen-16403000.conf","ota_fw_file":"http://cdn.iezvu.com/upgrade/am8252_nand_mirascreen/am8252_nand_mirascreen-16403000.gz","ota_enforce":true}[/COLOR]
When I opened mine it even read "5G EZCAST V1.4" on it - so I was pretty sure it should work. And it did. So for $17 one year ago I got myself a neat working EZCast5G. The MiraScreen5G gets into bootloader mode by pressing the one and only button right when you plug it into USB - no need to shorten pin 19 and 20 of the AM8252.
Thank you.
Some questions.
How to use this curl command with miniWeb?
Hi,
BUMP
No honestly, could you elaborate how this works ? Have 2 MiraScreen5G dongles...
Ender
Hi,
with some help from Chatty and another forum i got it done !
First i needed to add a line to my hosts file:
(On windows its found in C:\Windows\System32\drivers\etc)
Code:
127.0.0.1 www.iezvu.com
Then i downloaded miniweb and created a file containing the desired server answer.
Miniwebs web root resides in the "htdocs" folder by default, so i created a folder named "upgrade" and in that folder a file named "ota_rx.php.
I edited that file to contain this text:
Code:
{"ota_conf_file":"http://cdn.iezvu.com/upgrade/ezcast5g/ezcast5g-16602000.conf","ota_fw_file":"http://cdn.iezvu.com/upgrade/ezcast5g/ezcast5g-16602000.gz","ota_enforce":true}
I fired up miniweb with the parameter "-p 80" to listen on the stabdard web port.
THEN i started the EZ Updater app, connected my dongle in Flash mode and VOILA it detected the version i wanted it to detect.
So it flashed (took forever with several loops) my MiraScreen5G to a EZCast5G !!!!
After that initial update the dongle detected a newer version and updated okay.
Please note that AFTER the update you cannot get into flash mode by simply pressing the key. I assume that key is not considered existing anymore since the EZCast5G has none as well
So for further flash-fun we need to short the Pin like its descived by Chatty !
THANKS Chatty & all,
Ender
Just opened a K6 mirascreen and found these
nanya nt5cb64m16fp-dh 128mb ddr3 ram
am8272
samsung k9f1g08u0d 16mb flash
the pcb reads S?-EZCAST-8271-V2F
im unable to find a suitable firmware for it and no idea how to enter download mode....
---------- Post added at 06:02 PM ---------- Previous post was at 05:35 PM ----------
the firmware says 1.3707.11 btw
Hey Guys,
If someone knows, please share the knowledge.
Few Months ago when I was updating the firmware, my Dongle died due to power cut.
after reconnecting my PC couldn't read the version of my dongle. Today I wanted to revive my Dongle But have no to little experience on the Windows Debugging. I know my Dongle is not dead and it has no firmware, I also know that EZCast Repair tool can Flash the Firmware to it, I can download the firmware using the OP, I can also see that The App has options for Manually flashing the Firmware.
But I don't know how and what to do to access the areas shown in the Screenshot.
anyone please help me and point me to right direction.
Thanks in Advance.
SweenWolf said:
Hey Guys,
If someone knows, please share the knowledge.
Few Months ago when I was updating the firmware, my Dongle died due to power cut.
after reconnecting my PC couldn't read the version of my dongle. Today I wanted to revive my Dongle But have no to little experience on the Windows Debugging. I know my Dongle is not dead and it has no firmware, I also know that EZCast Repair tool can Flash the Firmware to it, I can download the firmware using the OP, I can also see that The App has options for Manually flashing the Firmware.
But I don't know how and what to do to access the areas shown in the Screenshot.
anyone please help me and point me to right direction.
Thanks in Advance.
Click to expand...
Click to collapse
Have you found any help? I have updated to EzCast firmware but now my dongle doesn't appear on wifi list and on TV only shows EzCast logo..
dLightas said:
Have you found any help? I have updated to EzCast firmware but now my dongle doesn't appear on wifi list and on TV only shows EzCast logo..
Click to expand...
Click to collapse
No I found no help.
All I need is access the flashing area.
I had 2 tools laying around (think i deleted those)
One was older and directly opened the firmware flashing page, but that doesn't have the partition table of My Dongle.
And the other tool which have the partition table, opens on main page (which is automated and does nothing)
If somehow i could access the firmware flashing area on the newer tool then I could revive my dongle.
If your dongle contained older chip of Action Electronics (earlier than 52) then the older tool can flash your dongle.
nostupidthing said:
Just opened a K6 mirascreen and found these
nanya nt5cb64m16fp-dh 128mb ddr3 ram
am8272
samsung k9f1g08u0d 16mb flash
the pcb reads S?-EZCAST-8271-V2F
im unable to find a suitable firmware for it and no idea how to enter download mode....
---------- Post added at 06:02 PM ---------- Previous post was at 05:35 PM ----------
the firmware says 1.3707.11 btw
Click to expand...
Click to collapse
Today there was a firmware upgrade available and after updating it's dead any help
Edit: OK I was able to flash using this tool (https://mirascreen.com/pages/repair-tool-for-chip-8272-products) but still nothing comes up...
Edit 2: The new firmware is 1.10505.52
MiraScreen G9 Plus
=================
[Name Model] , [Vendor String] , [Supported of the "MiraScreen G9 Plus"]
(EZCast5G) - ezcast5g - Not supported
(MiraScreen5G) - am8252_nand_mirascreen - Not supported
(EZCast 2H) - am_8270_ezcast4k-dongle_ezcast2h - Not supported
(EZCast TX) - am_8270_ezcast-tx_nand-std - Not supported
(EZCast 2) - am8271_ezcast2K - Not supported
(EZCast 4K) - ezcastduo - Not supported
(EZCast Band1) - am_8271_ezcast2-dongle_b1 - Not supported
(EZCast Ultra) - am_8275_ezcast-dongle_ultra - Not supported
(AnyCast M100) - sage_8272_mirascreen-dongle_anycast - Supported
(MiraScreen K6) - am_8272_mirascreen-dongle_std - Supported
Check Firmware over http api:
https://api.ezcast.com/api/firmware...mirascreen-dongle_std&firmware_version=1.10.3
https://www.ezcast.com/service/ota/..._8272_mirascreen-dongle_std&rx_version=1.10.3
Current official firmware version for the "Mirascreen G9 Plus": 1.10505.61
Do you know others? I would for the model "Mirascreen G9 Plus"?
"Mirascreen G9 plus" supports alternative Firmware (Firmware tested on the "MiraScreen G9 Plus"):
FW v1.13610.47: http://cdn.iezcast.com/upgrade/am_8...dongle_std_official-1.13610.47-0x99A7C4FD.img
Flash Tool: https://cdn.shopify.com/s/files/1/0017/6553/9884/files/MiraScreen_8272_Repair_Tool.rar
FW v1.10505.3: http://cdn.iezcast.com/upgrade/sage...gle_anycast_official-1.10505.3-0x937AC2AD.img
Flash Tool: https://cdn.shopify.com/s/files/1/2427/2515/files/AnyCast_M100Repair_Tool.zip
Small modification of Wi-Fi antenna:
https://forum.xda-developers.com/t/mirascreen-g9-plus-hw-fw-mods.4391225/
Hi to all, can anyone help me please with my EZ mira app and dongle device associated with it (miracast).
I have tried to upgrade software for my miracast device thru EZmira app, but suddenly Commercials pop up and my upgrade has been stuck at 10% and won't go further , worse after disconnect or reset there is no signal at all anymore it does not start /boot nor emmit wifi signal. What to do (because of stupid commercial)??
I tried to reset device several times but nothing, tried reseting thru PC but it does not load or Windows does not recognoze device to upgrade it thru web tools.
Please can anyone get that firmware back in my device and restore it .
Much appriciated and thanks in advance!
Anton TNT said:
Hi to all, can anyone help me please with my EZ mira app and dongle device associated with it (miracast).
I have tried to upgrade software for my miracast device thru EZmira app, but suddenly Commercials pop up and my upgrade has been stuck at 10% and won't go further , worse after disconnect or reset there is no signal at all anymore it does not start /boot nor emmit wifi signal. What to do (because of stupid commercial)??
I tried to reset device several times but nothing, tried reseting thru PC but it does not load or Windows does not recognoze device to upgrade it thru web tools.
Please can anyone get that firmware back in my device and restore it .
Much appriciated and thanks in advance!
Click to expand...
Click to collapse
Do you have a specific device?
Manufacturing publishes tools to restore some firmware here:
EZCast: https://www.ezcast.com/repair
MiraScreen:
https://mirascreen.com/pages/repair-tool-for-chip-8268-8252-products
https://mirascreen.com/pages/repair-tool-for-chip-8272-products
AnyCast:
https://any-cast.com/pages/repair-tool-for-chip-8268-8258-products
https://any-cast.com/pages/repair-tool-for-chip-8272-products
renda-l said:
Do you have a specific device?
Manufacturing publishes tools to restore some firmware here:
EZCast: https://www.ezcast.com/repair
MiraScreen:
https://mirascreen.com/pages/repair-tool-for-chip-8268-8252-products
https://mirascreen.com/pages/repair-tool-for-chip-8272-products
AnyCast:
https://any-cast.com/pages/repair-tool-for-chip-8268-8258-products
https://any-cast.com/pages/repair-tool-for-chip-8272-products
Click to expand...
Click to collapse
I have trided this solution , but no prevail, like device is dead, nothing just blank screen after failed update
Anton TNT said:
I have trided this solution , but no prevail, like device is dead, nothing just blank screen after failed update
Click to expand...
Click to collapse
This procedure works 100%, completely restores the firmware. If only an incorrect update occurred.
renda-l said:
This procedure works 100%, completely restores the firmware. If only an incorrect update occurred.
Click to expand...
Click to collapse
I'm not shure maybe I'm doing something wrong, but even windows doesn't recognize device
Anton TNT said:
I'm not shure maybe I'm doing something wrong, but even windows doesn't recognize device
Click to expand...
Click to collapse
Yes, of course, if the firmware is faulty, the device is not recognized and does not work. You must follow the Firmware Recovery Procedure. The device will most likely be repaired. Unfortunately, unless you specify a specific type, you can't be specifically advised on how to proceed.
renda-l said:
Yes, of course, if the firmware is faulty, the device is not recognized and does not work. You must follow the Firmware Recovery Procedure. The device will most likely be repaired. Unfortunately, unless you specify a specific type, you can't be specifically advised on how to proceed.
Click to expand...
Click to collapse
It is MIRACAST, I dont know chip number but it is dongle type round shaped eith EZmira app controlled
Anton TNT said:
It is MIRACAST, I dont know chip number but it is dongle type round shaped eith EZmira app controlled
Click to expand...
Click to collapse
Set your device to Recovery mode according to the procedure and use the tool for chip 8268/8252 or 8272. If the response is "device connected", it is a given chip set.
renda-l said:
Set your device to Recovery mode according to the procedure and use the tool for chip 8268/8252 or 8272. If the response is "device connected", it is a given chip set.
Click to expand...
Click to collapse
on which side is pin 7 and 8 ? Chip on my board is square shaped and got pins on all sides. Just to be sure not to fry anything, which side is NAND memory
Anton TNT said:
on which side is pin 7 and 8 ? Chip on my board is square shaped and got pins on all sides. Just to be sure not to fry anything, which side is NAND memory
Click to expand...
Click to collapse
If your device has a button, first try to enter recovery mode, press the button and connect USB.
In the procedure is a photo of the MCU and these pins are shown.
Hi, I tried flashing my galaxy watch 3 (SM-R845F) with combination software (to then proceed to all the necessary steps in order to change CSC), but after all the flashing process went through, I received a fail message. Now my watch is bricked and I understand there could be an etoken issue that somehow needs to be taken care of, yet not sure if this applies to my specific case. Could anyone help? thx
More details...
For instance...
A
Filenames... because more then 1 file exists...
B
netOdin and also Odin "talks" to you... this called Logfile...
B.1
To capture this log...
Photo and or Screenshot...
B.2
This is f. text... you can Copy and Paste
C
Please define bricked... especially in your case...
Watch is not more swimming? Flying? Or cooking?
Tiny hint...
With Crystal Ball on...
Your Combination Firmware was still with meta-data folder...
Best Regards
Hi, thx for your help. Things have evolved a bit. I was following technoproz's video (
) to see if I could change my CSC in order to get samsung pay working on my SM-845F . I hence started flashing it with the combination file (COMBINATION FT55 R845FSQU1AUB1, I also tried with 3 or 4 earlier releases, same issue) but on reboot it would initially get to a splash screen (can't remember what it would say) and then was permanently hooked onto a boot loop . However, on reboot, it would allow me to access the reboot menu, get to wifi hotspot mode, and I was able to connect it to odin ( I use netodin 3, 1.0) . I reflashed it with it's firmware (R845FXXU1CTJ5 Tizen 4File) and the watch is now working again (maybe just a few changes from the version it initially came with). Unfortunately, when I check the logfile, it only registered the last activity, in this case, my firmware reflash (so nothing related to the previous combination flashing), which went fine. Was wondering wether the initial combination flashing bricking/boot loop issue could be related to some flags I would need to check on the otions tab in netodin..
However, my issue still remains unsolved, i still can't change my CSC to italy (that's where I am right now) to setup samsung Pay, but most of all to set up the esim.
Thanks for any suggestions
CSC Change: Model R845U -> Model R845F
Firstly, thanks to a lot of help from @Nmc_alves® @adfree @[email protected] and @technoproz (Link here). As well, most, if not all, of the files are provided by these guys & a big shoutout to them! Purpose of this post is to put the...
forum.xda-developers.com
You saw this thread?
Example how to remove useless crap meta-data from TAR...
No idea yet if somebody allready did it for COMBINATION-FT55_R845FSQU1AUB1...
Caution... maybe not more safe enough to use... Samsung Rollback Prevention crap ...
COMBINATION-FT55_R845USQU1ATL2_clean_v1.tar.md5
I am using 7Zip Tool to extract and repack TAR...
Good Luck.
Own Risk!
Best Regards
Thanks so much, I'll have a look at it asap
Hi, thx for all your help, looks like i finally made it. The only thing i still can't manage is to setup the esim (will try with my carrier, Vodafone). I don't know if you happen to have any ideas about that. But thx for everything, great result so far
You know this thread?
CSC Change - Model R845U
Hi guys, I really need some help please. I have the US model R845U LTE and I'd like to change the CSC to ITV (Italy) to get the latest updates as mine is stuck to R845USQU1BTK2. I am following the procedure of Technoproz but I need to be sure...
forum.xda-developers.com
And you choose ITV?
Or something else?
And you are sure changes are made...
IMHO you can pull the files again and check...
Best Regards
Itv absolutely, i changed values on both files
faby70 said:
Hi, thx for all your help, looks like i finally made it. The only thing i still can't manage is to setup the esim (will try with my carrier, Vodafone). I don't know if you happen to have any ideas about that. But thx for everything, great result so far
Click to expand...
Click to collapse
U used combination file of 845U so the watch got unbricked? mine also bricked due to metadata error
Hi everybody, procedure that saved me is by USB...pinout like active 2, cable only Samsung worked for me
Good luck!
faby70 said:
Hi, thx for all your help, looks like i finally made it. The only thing i still can't manage is to setup the esim (will try with my carrier, Vodafone). I don't know if you happen to have any ideas about that. But thx for everything, great result so far
Click to expand...
Click to collapse
Please, which files did you use? I try multiple and multiple times with different files ... Nothing works it's frustrating..I tried with all combination files with firmware CTJ5, but at the end always fails ..
adfree said:
CSC Change: Model R845U -> Model R845F
Firstly, thanks to a lot of help from @Nmc_alves® @adfree @[email protected] and @technoproz (Link here). As well, most, if not all, of the files are provided by these guys & a big shoutout to them! Purpose of this post is to put the...
forum.xda-developers.com
You saw this thread?
Example how to remove useless crap meta-data from TAR...
No idea yet if somebody allready did it for COMBINATION-FT55_R845FSQU1AUB1...
Caution... maybe not more safe enough to use... Samsung Rollback Prevention crap ...
COMBINATION-FT55_R845USQU1ATL2_clean_v1.tar.md5
I am using 7Zip Tool to extract and repack TAR...
Good Luck.
Own Risk!
Best Regards
Click to expand...
Click to collapse
Thanks that's solves the problem with combination firmware...f*** meta data folder was the problem, when I deleted and repack, all combination firmwares work and I've be able to put into Spanish region and PHE to work with Samsung pay
mario_isp said:
Thanks that's solves the problem with combination firmware...f*** meta data folder was the problem, when I deleted and repack, all combination firmwares work and I've be able to put into Spanish region and PHE to work with Samsung pay
Click to expand...
Click to collapse
This night another time Samsung or banco Santander locate my smartwatch (Spain region and PHE) and erase my card... So they locate the serial number I think, so for me it's nothing to do...
mario_isp said:
Thanks that's solves the problem with combination firmware...f*** meta data folder was the problem, when I deleted and repack, all combination firmwares work and I've be able to put into Spanish region and PHE to work with Samsung pay
Click to expand...
Click to collapse
Could you please send me your combination file as mine seems to close odin when I click on start.
Hrishabh2005 said:
Could you please send me your combination file as mine seems to close odin when I click on start.
Click to expand...
Click to collapse
Of course, but how can I send you? (I don´t have clouds)
mario_isp said:
Of course, but how can I send you? (I don´t have clouds)
Click to expand...
Click to collapse
you could try to use this: https://send-anywhere.com/
Just upload it there and then send me the key code. I greatly appreciate this man
Every now and then I miss an incoming call because my Zenfone 8 has mysteriously switched itself into vibrate only or silent mode.
The only way I can see for it to do this by itself is the power button has to be pressed to access the lock screen, then a volume up or down button has to be pressed to reveal the volume slider, then a tap the ringtone icon (at the top of the volume slider) will switch to vibrate only mode, or two taps will select silent mode.
All of this would have to happen while it's in my pocket, even though pocket mode is enabled!
Any ideas how I can prevent this sporadic silent mode problem?
Try turning face recognition off.
landsome said:
Try turning face recognition off.
Click to expand...
Click to collapse
Thanks for your suggestion, but Face Recognition is not enabled - I use a pin code lock. I have enabled Smart Screen in the Display section (screen stays on longer if a face is detected) but the problem happens even when the phone has been in my pocket for some time....
Sorry, in my case it disappeared. Are you on Android 12? If not, maybe try it.
Thanks. Still waiting for Android 12 OTA....
Tom100% said:
Thanks. Still waiting for Android 12 OTA....
Click to expand...
Click to collapse
Why? For me it solved a dozen problems, battery chief among them.
Tom100% said:
Thanks. Still waiting for Android 12 OTA....
Click to expand...
Click to collapse
If you are on the latest android 11 build, you can simply download the latest Android 12 firmware file from the zenfone 8 support page (Bios download section) and then drag the zip file at the root of the phones storage (with the Downloads , Pictures, etc. folders). After that is done, simply reboot the phone wait a minute or two and it will ask you to start the update process. Just tap the notification and it should start
Adaoh said:
If you are on the latest android 11 build, you can simply download the latest Android 12 firmware file from the zenfone 8 support page (Bios download section) and then drag the zip file at the root of the phones storage (with the Downloads , Pictures, etc. folders). After that is done, simply reboot the phone wait a minute or two and it will ask you to start the update process. Just tap the notification and it should start
Click to expand...
Click to collapse
Thanks for your help. I was waiting for the OTA in case I messed things up - but now will have a go. Thanks.
Tom100% said:
Thanks for your help. I was waiting for the OTA in case I messed things up - but now will have a go. Thanks.
Click to expand...
Click to collapse
Could you please post a link to the firmware file that I can download to my phone and simply reboot to start the update - this sound so much simpler than all the other references I've found to much more technical procedures for manually updating to Android 12. Thanks.
Tom100% said:
Could you please post a link to the firmware file that I can download to my phone and simply reboot to start the update - this sound so much simpler than all the other references I've found to much more technical procedures for manually updating to Android 12. Thanks.
Click to expand...
Click to collapse
Yeah here you go, (latest direct download from Asus) you can do it all from the phone without a computer, just move the zip file out of the downloads folder to the Internal storage option (root directory).
Thanks again, Much appreciated!
i have a SGW5 smr910 with CHC CSC CHINA version.but useing a lineage os 20 on my phone and install a google fw.my watch cant pair with my phone so i try change it to other regen.
here is my guide
A.download @adfree 's tar package and extract 7z
https://forum.xda-developers.com/t/...-csc-change-and.4323469/page-30#post-87903011
B.Download netodin
C.Power off watch and press power and customize double buttons at the same time.
D.Wait the watch boot and you can see "reboot" under samsung logo.then press three time power button as fast as you can.
E.Wacht will to the fastboot mode? the power button with short press select to wireless and long press to confirm.
F.Enter wireless download and press power switch AP mode,use your PC wireless to connect it.
E,Open netodin and select tar file in AP selection and tick it.start
F.start flashing.it will take about 1 hour with my linux pc with wine netodin.
works on my watch with the newest update(camera contral update).
Best Regades
Does it now connect with your phone and does it work?
BeijingRaj said:
Does it now connect with your phone and does it work?
Click to expand...
Click to collapse
yes,all function looks good.install app with google play and updates was ok.like a USA watch.
i donot use samsung phone not needs pay.
i think the phone watch manager needs change sim Operator code to other range to pair with watch.not sure.
Hi, @pbbqdd
is there any way to flash SM-R915 (LTE version)?
Thank you.
romif.romif said:
Hi, @pbbqdd
is there any way to flash SM-R915 (LTE version)?
Thank you.
Click to expand...
Click to collapse
Same method he has described in the OP works,
Tricky part is finding the firmware for SM-R915
JazonX said:
Same method he has described in the OP works,
Tricky part is finding the firmware for SM-R915
Click to expand...
Click to collapse
Thanks, JazonX. It seems there is still no LTE firmware. :-(