OK folks, I know some of you are going to jump straight down my throat, but please, back off and stick to the friendly forums that this used to be where anyone would help anyone.
the story so far is that I once loved my Nexus One, I've had it since launch, I have ran Cynogen Mod 7 for a couple of years, I have had MUI roms running, I have played with various kernels, updated radio, upgraded hardware, all was going wonderfully.
the one thing I could never get was full SU!! Heck knows why!!
I then started getting random problems and downloaded the original google frf83 software and flashed the phone via update.zip using amon-ra recovery.
I thought all was well after this, as my phone received 3 OTA updates and now my phone is on...
Android 2.3.6
Baseband 32.41.00.32U_5.08.00.04
Kernel 2.6.35.7-59465-g42bad32 ([email protected] #1)
Build GRK394
I noticed that in the Status (settings) it was displaying my old sim card number, which is not the number for the sim in the phone now. his I thought was odd and that something had gone wrong.
So as most of us would do, I went to boot AmonRa recovery and it wasnt available, it had been overwritten with the default recovery; ok lets just ADB and reflash it, I hadnt used ADB for a couple of years because I did everything through AmonRa's awesome recovery!!
So off I go, install the SDK, all the appropriate packs including the USB driver, just like I did when I originally flashed the phone with the recovery image!
But an old problem came back that I hadnt even been bothered about because I always put stuff on SDcard via a card reader!!
I have had consistent problems with my nexus one for some time now in regards to the USB drivers, no matter what I do the phone will not install and I believe it could be some conflict in the device.
I am running Vista Ultimate (fully registered) and no matter what I do I cannot get the Nexus One to install. It will only display as unknown device, which is absolutely useless.
I have browsed every post and tried everything I have found, and yet nothing is working. I have used devmgmt, I have tried the roll backs, I have tried to install every driver available to get it working. I have uninstalled the device, updated drivers after fresh install attempts, I have even formatted my laptop thinking it may have had a corrupt OS and bought Vista Ultimate.
I am not a complete noob and I have been around these forums for some years, but I never thought I would have to cry out like a 4ucking Noob with such a seemingly simple problem, but it is not simple, I have done everything I can possibly find!!
I must get the USB working in order to get the recovery back, I can access my phones default recovery but it will not work when trying various roms as update.zip!!
I have tried the terminal commands on the phone to install the recovery.img but I do not have SU access and the phone point blank refuses.
I have attempted to change and remove the recovery files reffered that are causing the revert to default recovery, but shock.. I cannot delete because of insufficient permissions. I cannot ADB because the USB driver refuses to install.
So if I cannot change the files due to permissions, I cannot ADB because of USB, I cannot get to Ra's recovery because of bootfiles, I cannot use default recovery to update.zip... I am absolutely losing my mind and I'm going nuts browsing the forums for the second week running, yes I am now on day 12 of trying to fix this problem and at a complete loss...
Can someone please help??
I will even allow remote access to pc because I am that desperate to resurrect my beloved Nexus One.
I also have a Galaxy I9000 without 3 button download mode but that is an entirely different story!!
Please just someone, come to an oldskoolers rescue, and yes PAYMENT will be given to the knight in shiny armour!!
You could try on another computer which doesn't run Vista
tommert38 said:
You could try on another computer which doesn't run Vista
Click to expand...
Click to collapse
Or just use fastboot instead of adb...
His Nexus One isn't recognized by the computer, so that won't help unfortunately. Also, I've never heard of build GRK394..
tommert38 said:
His Nexus One isn't recognized by the computer, so that won't help unfortunately. Also, I've never heard of build GRK394..
Click to expand...
Click to collapse
Install the drivers for fastboot already Jeez and then read How to use android for dummies.
Ok guys ... this is the problem ...:crying:
I have (had) a Droid Bionic running ics leak 232 in Brazil (GSM/UMTS ... thanks to xda developers - "bionic in t mobile" thread).
While messing around with the phone connected to linux (baaad idea) at some point I deleted the bootloader ("happy finger" + lack of knowledge os linux).
Now, my phone doesnt power up and RSD Lite doesnt recognize it when connected but, when I connect it to the PC, a green light lits at the top right corner of the phone and Windows recognize it, at the device manager, as a OMAP4430 USB under TI Board tab. This leads me to think that some kind of life still exists down there or, the hardware is alive and waiting for the right software.
After a long quest for a solution, I found this: "forum.gsmhosting.com/vbb/f634/unbrick-dead-samsung-gt-i9250-galaxy-nexus-gt-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/index9.html".
Now I think this is the way out of this mess (is the same hardware, OMAP platform from Texas Instrument), if exists any, but this was made for Samsung, by Samsung technicians, and doesnt apply to Motorola. :crying: again.
So, is there anyone who can help me, or have any idea of what can be done (other than trow it away or use it as a paper weight)?
Any help would be most appreciated.
Regards
I saw you haven't had any replies yet. My roommate had a similar problem, he managed to mount his system partition automatically and thought his SD card was partitioned into 10 or more partitions.
So he reformated the mount and had a dead phone right after, said he only got a small white light on his notification light when plugged in.
I didn't get a chance to check it out before he took it to Verizon for a refurb, so sadly I'm not much help. Just thought I'd input anything I knew since you still had an empty thread. Hope it comes back alive!
Sent from my kitchen toaster.
Have you tried using the command line version of moto-fastboot? It might work, but might not work... I think you need to boot into fastboot mode, but I could be wrong... Either way it's worth a try.
Also, does anything happen when you try to hold down the vol+ and VOL- buttons when powering on the phone?
Sent from my XT894 running ICS
its dead
danifunker said:
Have you tried using the command line version of moto-fastboot? It might work, but might not work... I think you need to boot into fastboot mode, but I could be wrong... Either way it's worth a try.
Also, does anything happen when you try to hold down the vol+ and VOL- buttons when powering on the phone?
Sent from my XT894 running ICS
Click to expand...
Click to collapse
Thank you for your answer danifunker;
The phone is dead. Pressing buttons does nothing. The only thing that happens is to lit the notification green light at the top right corner of the screen WHEN a plug it in my PC and windows keep telling me this is a unknown device. I unsuccessfully used OMAPFlash, but installing the usb drives that came with it, when I plug it to the PC, windows device manager shows me a new device "OMAP4430 USB" under a new tab "TI Board" , whitch is not recognized by RDS lite or adb or fastboot. Is only recognized by OMAPFlash. If you dont know about OMAPFlash, I found it here http://forum.xda-developers.com/showthread.php?t=1701471 , but this procedure is for a Samsung, witch uses the same platform (OMAP4430), but I dont have the right configurations for the Droid Bionic.
Just the same
chrisp6825 said:
I saw you haven't had any replies yet. My roommate had a similar problem, he managed to mount his system partition automatically and thought his SD card was partitioned into 10 or more partitions.
So he reformated the mount and had a dead phone right after, said he only got a small white light on his notification light when plugged in.
I didn't get a chance to check it out before he took it to Verizon for a refurb, so sadly I'm not much help. Just thought I'd input anything I knew since you still had an empty thread. Hope it comes back alive!
Sent from my kitchen toaster.
Click to expand...
Click to collapse
Thank you for your interest.
If you have any further notice about your roommate problem, please let me know.
And, if you manage to post a reply from your kitche toaster, I am sure you will be able to help in this problem. looking forward for that. :laugh:
pjcw said:
Thank you for your interest.
If you have any further notice about your roommate problem, please let me know.
And, if you manage to post a reply from your kitche toaster, I am sure you will be able to help in this problem. looking forward for that. :laugh:
Click to expand...
Click to collapse
Can you explain exactly how you deleted the bootloader off of the Bionic? Knowing EXACTLY (what you ran, what you typed) what you did will help us help you.
As an aside, I had no idea there was a SGSII-OMAP variant, but I am not big on the Samsung phones, just assumed they've only been using their own SoCs for a while now...
Hi podspi.
Sorry for the delay.
As a matter of fact, wasnt me that bricked the phone. A friend o mine tryed to flash a gelly beam version, and did it via Fastboot,, under Linux (of witch I know almost notingh).
He told me that the problem was that he made:
fastboot erase mbm
and then
fastboot reboot bootloader
and so the bootloader was lost. He missed a step.
Any help will be greatly aprecieted.
Regards
IOW, since the mbm has been erased, and the mbmflashable hasn't been flashed, there is no way to get it into the bootmenu sceen anymore, right?
Hmmm. Let me ask some other folks too.
Sent from my ASUS Transformer Infinity Running Tapatalk.
I wonder if a factory cable would work to get it to flash mode? Why would you even mess with the bootloader trying to install ICS? You do that through recovery, not fastboot.
I was on ICS ... This was an attempt to get it to JellyBeen ... I, also, dont know why. I was perfectly happy with ICS working in GSM/WCDMA. This is why I am so sad ... It was a very stupid thing to do ... As a matter of fact, I will get a factory cable, but I dont think this is gonna help. Anyways, I am keeping it by side to remember me not to mess with things that are working fine. I'm kind of losing hope that it can fixed.
Regards
pjcw said:
I was on ICS ... This was an attempt to get it to JellyBeen ... I, also, dont know why. I was perfectly happy with ICS working in GSM/WCDMA. This is why I am so sad ... It was a very stupid thing to do ... As a matter of fact, I will get a factory cable, but I dont think this is gonna help. Anyways, I am keeping it by side to remember me not to mess with things that are working fine. I'm kind of losing hope that it can fixed.
Regards
Click to expand...
Click to collapse
I think we need to figure out how you flash mbm back onto there. Actually, I think it's mbmloader that you need on there...
mbm = Motorola Boot Manager (?) maybe.
After reading this page: http://omappedia.org/wiki/Bootloader_Project
I believe, mbm = uboot, mbmloader = x-loader
Just found this page... http://www.droid-developers.org/wiki/How_to_load_mbmloader_from_SD_card
download the SBF and grab the mbmloader for ICS. See if you can get a little further...
SamuriHL sHouse of Bionic restored mine when all I could get was fastboot.
Sent from my DROID BIONIC using xda premium
It won't help this. It needs to be flashed at the omap level and since moto isn't about to release the configuration files for the Bionic you can consider this one permanently bricked.
Sent from my Xoom using Tapatalk 2
I tend to agree with SamuriHL. I was thinking that the configuration souldn't be so diferent than others (like Samsung) that uses the same platform (omap). I know that it's naive, but what else could I do. Also, I need the signed files for x-loader and u-boot, of witch I think danifunker is right, this means mbm and mbmloader, that I have, but they came in bin format and not image format (.img). I will try to convert them to .img, but I am at the end of my resources (not that they are so many), and will give up shortly. At this point (giving up), I will buy another cellphone AND IT WONT BE A MOTOROLA, Probably a HTC or a Samsung. But I will keep Bionic at my desktop, as a paperweight, to remind me how I liked it, how I mess things up.
Anyways, if I manage to solve this problem, I will post here, and I wish to thank everyone that spare their time to try to help people. If anyone have any suggestion, I'll be glad to follow.
If you modify them in any way they'll no longer be signed and won't work. Someone else already went through several weeks of trying to fix their phone that had similar issues. He's well connected and still couldn't get the necessary files. Don't necessarily give up on Moto, though...it's not their fault we're stuck with locked bootloaders. Blame VZW for that one. Even Samsung was forced to lock the S3 on VZW. Things may change some day. We'll have to wait and see.
You can always get RAZR i with the unlockable bootloader! that might make things a bit easier...
IT'S DONE!!!!!!!!!
IT'S DONE ....... IT IS ALIVE AGAIN :highfive:
Guys. My phone is alive again. Thanks to FRAGULINA and PICGRABBER for their unvaluable help. It is now running GSM with data enabled (3G) with ICS 232, rooted, thanks to FRAGULINA and HTCFlyerX ( http://forum.xda-developers.com/showthread.php?p=31101192&highlight=build+prop#post31101192).
Well, I'm attaching 2 zip files. One is omapflash and the other is "THE FILES", and instructions on the "release_notes.txt". This works on LINUX.
And works like a charm. Took me (much) less than 5 minutes to get me from a dead phone to bootloader fastboot. And the rest is history. Well known procedures.
Thanks to all of you that helped or tryed to help.
Enjoy.
To those who have an interest in new challanges (as I know you are), i'm opening a new quest and would appreciate your thoughts.
I have at hand an atrix 2 and I want to find where in hell is the subsidy code writen at and how can I read it. This new quest will be at the proper location at the atrix 2 forum.
I think we won this challange. Lets go for another.
Any doubts I am available to help.
Regards.
Holy.....uh, well, WOW! I'm in awe here on this one. WELL DONE!!!!!!!
SamuriHL said:
Holy.....uh, well, WOW! I'm in awe here on this one. WELL DONE!!!!!!!
Click to expand...
Click to collapse
Can we use this method to flash any firmware to the phone? Lets say you load the latest ICS, maybe we use this method which restores the most original bootloader to the phone and then flash to any version?
Which version did you fastboot to?
pjcw said:
IT'S DONE ....... IT IS ALIVE AGAIN :highfive:
Guys. My phone is alive again. Thanks to FRAGULINA and PICGRABBER for their unvaluable help. It is now running GSM with data enabled (3G) with ICS 232, rooted, thanks to FRAGULINA and HTCFlyerX ( http://forum.xda-developers.com/showthread.php?p=31101192&highlight=build+prop#post31101192).
Well, I'm attaching 2 zip files. One is omapflash and the other is "THE FILES", and instructions on the "release_notes.txt". This works on LINUX.
And works like a charm. Took me (much) less than 5 minutes to get me from a dead phone to bootloader fastboot. And the rest is history. Well known procedures.
Thanks to all of you that helped or tryed to help.
Enjoy.
To those who have an interest in new challanges (as I know you are), i'm opening a new quest and would appreciate your thoughts.
I have at hand an atrix 2 and I want to find where in hell is the subsidy code writen at and how can I read it. This new quest will be at the proper location at the atrix 2 forum.
I think we won this challange. Lets go for another.
Any doubts I am available to help.
Regards.
Click to expand...
Click to collapse
This is unbelievable. After talking with you on Gtalk, I thought this was a permanent brick. Thanks for the files...I have a guy on gtalk right now who can benefit from these.
Ok I need some help. As of right now my tab is dead, the only thing it does when powered on is loads to the Asus splash screen and that's all. I can not get it into Fastboot mode at all and Adb cant find it either. I have already tried Sp Flashtools to no avail. I have all the Vcom drivers installed, every where I searched the one driver that people talked about was the mtk6585 driver ( I think that's what it is ) , the one for me that popped up and went away really fast was a driver called CLOVERVIEW. So needless to say I cant get SP Flash tools to work, and without fastboot mode im really stuck. Ever since I first came across this site a few years back I have rooted, and put custom roms on countless devices, I would call myself an experienced flasher. Well this tab has me feeling like a real noob, I can not figure it out. So if someone can help me it would be greatly appreciated. Thank you XDA world.
Try this: http://forum.xda-developers.com/android/help/instructions-reviving-me170c-me170cx-t3017466
It worked for me.
silviu74 said:
Try this: http://forum.xda-developers.com/android/help/instructions-reviving-me170c-me170cx-t3017466
It worked for me.
Click to expand...
Click to collapse
Wont work for me. Like I said, I cant get into droidboot.
Downloading android studio and all sdk tools, hopefully something in this will help. I will post updates on any progress.
zMILWAUKEE said:
Downloading android studio and all sdk tools, hopefully something in this will help. I will post updates on any progress.
Click to expand...
Click to collapse
I just got myself into the same situation. If you can get to a point where CLOVERVIEW comes up, that can be fixed (I actually just added a howto to the general section). However, I don't know how to get out of the stuck splash screen, since it's an awkward medium between download and fastboot. I'm not even sure what I did to cause this; I had just flashed boot.img and splashscreen.img and issued a fastboot reboot-bootloader.
The device does indeed pop up in download mode for about a second while booting; doesn't seem long enough for a flash. I would really like to find out if there is any way to force this device to boot into download mode.
Hello,
this is my first thread/post on this forum, if I did anything wrong please don't be super harsh and inform me to what to do better, thanks.
So why am I asking for help anyways you may ask, well I had my old Xperia Z1 laying around here for quite a while now and wondered if I could do anything productive with it.
So I came up with the idea to install a CFW like Lineage OS or something else.
This is not my first rooted and cfw phone but the first one what gives me nightmares and a headache.
So after reading all of the nice guides how to root it and how to unlock it, nothing of them is working for me, most of the threads have missing files which I cannot find on google or other just simply won't work for me.
First of all, I have rooted my phone via KingRoot in the meantime since the other methods where not working either.
I have turned on usb-debugging and also allowed installation from unknown sources.
And there we start with the first problem, downloaded the google SDK and installed all adb things I needed, did not work, then I tried it from the official sony website, downloaded the usb-driver folder and tried to install it manually, won't work either, because the device manager always gave me error code 10 "device cannot be started", I tried different sources and even die google studio thing and everything ended up with the same result.
Same error code even when I tried to activate fastboot on my phone by pressing down the volume up button, pluging the usb cable in, and yet again the same error message for this device too.
I am using windows 10 and never had such problems before with sony devices.
I hope someone of you can help me out to find a solution, if you need any further information, just let me know.
Did you solve this?
I have the same problem
snailer said:
Did you solve this?
I have the same problem
Click to expand...
Click to collapse
This may sound stupid or ridiculous, but yes I managed to work it out and was able to install the CWF on my phone which is working perfectly fine.
Since nobody was willing to help me I just skipped the part where I wanted to post my solution but yeah, this may help you too.
So what did I do? Simply I stopped using Windows 10 for this project, I just used one of my older PC's which still had Windows 7 Ultimate on it.
I just rooted the phone via KingRoot, since it was the only solution what kinda worked out for me, then I was able to install all needed SDK, fastboot and ADB files on my PC and was able to use the ones from the Sony site itself this time and after plugin in the phone to the PC, it installed everything else what was needed for the device manager.
After that was done with no error I was finally able to unlock the phone via the command which you can find also on the Sony website.
If you find this helpful or need any extra information just let me know, maybe I can help you then. Oh and if you found out a solution for you what worked, would be nice to hear that too.
Greetz