A71 s not operational
Only is working Android Recovery system menu BUT there is no FACTORY RESET
When A71 is plugged to PC reports device malfunction. ODIN can not see that A71 is in DOWNLOAD mode
Any suggestion for solving problem?
Why do you want to do factory reset?
A71 is stuck in that screen I attached.
It is constantly restarting by him self and stops when I go to Android Recovery system menu-
by presing power and volume up
I can not go out of this meny ...
It seems that phone is blocked by MAS360 .
Level 2 IT help in company will solve issue
Thanks all for help
Related
So this weird thing happened to my 1 month old Galaxy Note 5 with no root or any software modifications to it.
I was using it to send a text message yesterday and all of a sudden the phone hanged, did not restart by itself, the screen and the buttons were not responsive. I was able to restart the phone but it will not go beyond the Galaxy Note 5, powered by Android screen. I can restart the phone with Volume Down + Power but it will not go beyond that point. Holding the power button will not turn it off, so all I can do is restart the phone as well as enter download mode. I cannot enter recovery mode as I cannot switch off the phone. Tried to wait until the battery drained but once plugged in, the screen will automatically go to the Galaxy Note 5 Screen. Also tried pushing the Volume Up, Home and Power buttons before plugging the device in but still will not enter recovery mode.
When I got home, I tried using Smart Switch Initialization to re-flash firmware. Still the same problem.
Tried flashing with Odin 3.10.7 using latest firmware from my region. Firmware flash PASS but the problem is still the same: Cannot go beyond Galaxy Note 5 Screen, Cannot access Recovery Mode
Are there any other solutions that I can employ without tripping off Knox?
Thanks guys!
Did you find a way to fix this
Try wiping Cache in recovery.
If that doesn't work then a factory reset?
It will wipe everything on your device.
This is exactly the same scenario I am facing right now... exactly...
Hi everyone,
today I received my s10 Exynos version 128gb 8gb.
After transferring my data and started to configure my phone.
Right after installing the gcam 3.5 of Idan for rootless phone, I tried to make a screenshot with the Bixby and power button,
and the phone turns off, when I decided to turn on boom, some upload page with a message kernel crashed, after that I held power and v+dwn and the phone booted on safe mode, and this loop of the message and the safe mode like 5 times, then in safe mode I uninstalled the gcam of idan, and apparently for now all goes fine.
i don't know what to do, I saw this was a little normal in old phones, but can't find any information about that on s10 yet.
Anyone with the same problem? What did you make for resolving that?
Sorry for the bad English.
Thanks for everyone, by now my advise is not to install the gcam 3.5 of Idan that I download on their website.
Below I will post the link that I downloaded the apk
https://f.celsoazevedo.com/file/gcamera/GCam_5.1.018.177470874.41362666_IDan_N6_3.5_fix.apk
thanks for everyone!
EDIT: i just figure it out, that the button of volume down is stucked down, so when i hit the power it just inter in safe mode, i donto know what to do but i think thats the problem
EDIT2: volume down button stucked forcing the phone to always boot at safe mode. returning this phone
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Timing is the key
Set your finger on position where you gonna restart the device.
Hold power + vol down
After the screen restart switch soon as possible you finger to set to recovery by
Hold vol up + down + insert the USB C cable
Remember timing is the key. I have done this for several tabs that screw on my home so you are welcome bro
frontchasack said:
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Click to expand...
Click to collapse
Original firmware I used to fix my sm-t510
Account Suspended
flavarasa said:
Timing is the key
Set your finger on position where you gonna restart the device.
Hold power + vol down
After the screen restart switch soon as possible you finger to set to recovery by
Hold vol up + down + insert the USB C cable
Remember timing is the key. I have done this for several tabs that screw on my home so you are welcome bro
Click to expand...
Click to collapse
I think "restarts" may be confusing. Switch from down to up as soon as the screen turns off.
frontchasack said:
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Click to expand...
Click to collapse
You can use frija.exe to get the latest stock firmware. To get TWRP you MUST boot to recovery before system. If you allow the tablet to boot to system first, it will overwrite TWRP with the stock recovery. Do this by pressing vol down and power till the screen turns off. As soon as it does, switch from vol down to up while still pressing power and keep holding both till the red warning message appears. You also need to leave the cable attached to the PC while doing this.
Hello, I am currently in a big problem right now,
My tablet, a Galaxy Tab S2 SM-T719Y is stuck inside a boot loop - the Samsung tab s2 logo appears, but it does not reach the Samsung logo.
I tried to go to recovery mode, but to no avail. So I booted the tab into download mode and tried to install TWRP into it but due to FRP lock, the device did not allow me to download it.
Trying to fix it for school, tried a few FRP unlocking tools, but does not work.
It'd be great if anyone can help me, thanks
This is the Tab S2 8.0", 32GB.
Hi , since no one else helped. Try again download mode. .
If it won't stop looping try vol down+pwr to turn it off
then vol up+home+pwr to turn device on, release buttons when screen turns on, wait after 10 secs recovery will start.
Then you can factory-reset, this will wipe all your stuff too, but hopefully fix it!
Can anyone help me Fix my note 9? i was trying to flash magisk bootloop protector and it cause a weird loop in twrp that would give me like 30 seconds before it restarted. i tried to reflash twrp recovery and now it is stuck looping at the knox screen with no access to twrp, download mode and it also isnt being recognized in Odin (probably because it has a literal 1 second loop). its an N960F/D Exynos version. i'd rather not get it sent away if possible, so any help would be greatly appreciated
Edit: got to download mode by connecting to PC and in between powering on, pressed only bixby + vol down button and ended in DL mode. i Guess i was doing a power + vol down + bixby combo or maybe wasnt timed correctly to get it in DL mode