Hi, i recently got a redmi 4a and it just started boot looping. Not even boot looping, i try to turn it on and it shows the mi logo but then it just shuts off. I tried reflashing it using edl and the same error still occcurs. Is there any chance of saving thtis phone?
you tried reflashing? or you flashed?
aIecxs said:
you tried reflashing? or you flashed?
Click to expand...
Click to collapse
What’s the difference? I used Mi flash tool and a global firmware.
and? did it flash successfully? did flashing fail? the difference lol!?
aIecxs said:
and? did it flash successfully? did flashing fail? the difference lol!?
Click to expand...
Click to collapse
Yes, it said flash successful, but when I tried to boot it it just shuts off (doesn’t even restart) and I can’t boot into recovery
while it "shuts off" is there any sign of usb and maybe valid VID/PID that identifies the boot mode?
can you share log file from MiFlash log folder?
how did you put device in EDL mode?
aIecxs said:
while it "shuts off" is there any sign of usb and maybe valid VID/PID that identifies the boot mode?
can you share log file from MiFlash log folder?
how did you put device in EDL mode
Click to expand...
Click to collapse
When it "shuts off" it just show a black screen for like 2 seconds and goes back to the charging screen
i attached the log
i shorted the 2 pins which were showed in this video:
and then confirmed that it is in edl from device manager (drivers were installed)
Thanks for your help!
looks everything successful. but try Android 7.1 both china + global anyway
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Related
Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.
ldyte3 said:
Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.
Click to expand...
Click to collapse
Sadly Yes same happen to my friend
u need EDL mode + authurized xiaomi account to flash the fastboot rom
Antidote03 said:
Sadly Yes same happen to my friend
u need EDL mode + authurized xiaomi account to flash the fastboot rom
Click to expand...
Click to collapse
Ok thanks, i try miflash but get error cannot get hello packet.
how do i get EDL mode?
You flashed mi 9t recovery on mi 9t pro?
ldyte3 said:
Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.
Click to expand...
Click to collapse
ldyte3 said:
Ok thanks, i try miflash but get error cannot get hello packet.
how do i get EDL mode?
Click to expand...
Click to collapse
u need to open ur device and do test point ... search in youtube for k20 pro test point
Antidote03 said:
u need to open ur device and do test point ... search in youtube for k20 pro test point
Click to expand...
Click to collapse
no way man, its new phone, how i can do it without opening?
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
can you access the twrp?
foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.
Somebody please help...
unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.
jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.
PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.
For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..
Hello everyone
My brother's Mi A2 is bricked for no reason. I tried to solve this problem and searched a lot but didn't manage to solve it. I hope you can help.
* before telling my story here is some stuff to know:
- The phone was running official firmware and bootloader is locked, I've never played with it's software before.
- Oem unlocking option isn't turned on.
- The phone doesn't go to recovery mode, only fastboot or regular boot.
- I used EDL mode in every flashing attempt.
- I don't remember that there is a mi account assigned to the device.
* Here is what happened:
- The phone suddenly shut down during a call and never passed the AndroidOne logo after that.
- Tried EDL mode and miflash to flash the latest firmware. Flashing completed successfully but the phone still stuck on the androidone logo.
- Did it again and again but the result was constant.
- Tried flashing older firmware "Oreo 8.1" but during flashing system.img the process stopped with an error. (I don't remeber what the error was).
- I tried to turn on the phone but after showing AndroidOne logo This message appeared:
"Your device is corrupt. It can't be trusted and will not boot.
Visit this link on another device: g.co/ABH"
and the device shuts down in a minute.
Hint: Sometimes when I try to turn one the phone the above message appears after androidone logo and sometimes the device just keep showing the logo.
- Trying to flash any firmware version by using Miflash Beta gives an error message "Can not found programmer file" immediately. when I try again it gives: "can't read from port COM4", Changing the port gives the same error with different port number.
-When I use any other version of "Portable miflash", The flashing process starts normally but fails when trying to flash "dsp.img", giving an error of "writing time out".
- I tried reinstalling all drivers needed with no change at all.
I hope that you guys can help me solving this problem.
Thank you so much!
Try EDL mode opening your phone...
Badotti said:
Try EDL mode opening your phone...
Click to expand...
Click to collapse
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.
Ahmed A. Mohsen said:
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...
Badotti said:
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...
Click to expand...
Click to collapse
I opened the phone and used edl mode already but the problem is still present.
up
Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x
HTCDevil said:
Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x
Click to expand...
Click to collapse
This needs bootloader to be unlocked and my device's bootloader is locked.
Any solutions?
Go to service center this is last option you save RIP mi a2 ?
As I can see from picture you have posted, your bootloader is unlocked.
SkullSatan88 said:
Go to service center this is last option you save RIP mi a2
Click to expand...
Click to collapse
They refused to receive my device because I bought it from another country.
bomil said:
As I can see from picture you have posted, your bootloader is unlocked.
Click to expand...
Click to collapse
when I checked bootloader status in the beginning it was locked.
Are you sure that it's now unlocked?
Text me on telegram. @dejavutr
I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
This is why you have to be extra careful while flashing something.. hope you find a solution
kalebwinefield said:
I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Can you access fastboot mode? If so, you can try unlocking the bootloader again and installing the rom you want. If you haven't removed the mi account it will unlock and you don't even have to wait the required time again.
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
kalebwinefield said:
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
Click to expand...
Click to collapse
Download the latest fastboot firmware (MIUI 11) for your mi cc9 (not mi 9 lite). Don't grab the recovery.zip firmware, it's useless and will give you errors.
When you finish your download, unpack your .tar firmware twice and flash it with MiFlashTool while you are on fastboot mode. (Power/Vol-).
Next time, ask before flashing not after !
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
stinkyllamaXDA1 said:
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
Click to expand...
Click to collapse
What kind of firmware are you trying to flash trough MiFlash ? recovery.zip or fastboot ? Can you take screenshots so people can know what is your issue ? Without screenshot no one will help you here !
Cheers
I also same situation, does anyone know a good idea?
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
irum94 said:
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
Click to expand...
Click to collapse
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write ?
Stefke93 said:
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write
Click to expand...
Click to collapse
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
irum94 said:
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
Click to expand...
Click to collapse
No until someone patch firehose for sdm710 ?
Mi 9 lite
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
This guy helped me. He uses ultraviewer.net for remote connection. 1722 rubles for flashing.
MOD EDIT: Phone Number Removed
Le: how did you bricked it? I restored an older backup of android 9 over Android 10 from twrp. But from what I understand cc9 doesn't have rollback protection.
Le2: you can also try those fishy 710 firehose no Auth loaders you can find from various sources. Didn't worked for me but you can try.
If you flash Revolution OS or flash Android 9 over Android 10 rom you have good chance to hard brick device so you need to flash first fastboot rom if you want to go from 10 to 9
Thanks
friend @editheraven thank you very much for the contact, I spoke and yesterday I could flash my MI 9 lite I really appreciate it, thank you bro.
loc182 said:
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
Click to expand...
Click to collapse
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
chainorth said:
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
Click to expand...
Click to collapse
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
editheraven said:
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
Click to expand...
Click to collapse
it can't boot to fastboot or recovery mode.
chainorth said:
it can't boot to fastboot or recovery mode.
Click to expand...
Click to collapse
And no recovery? Only the splash screen?
editheraven said:
And no recovery? Only the splash screen?
Click to expand...
Click to collapse
yes .Mi logo 2 sec then screen off
Hi, I have a Xiaomi 11, it is stuck on "the system has been destroyed" and the bootloader is locked. Is there a way to install a new ROM or do something else?
Install MIUI Fastboot ROM using Xiaomi’s Mi Flash Tool [Guide]
Learn how to install Fastboot ROM on Xiaomi, Redmi, and Poco devices using the Mi Flash Tool. Useful for unbricking, fixing bootloops, and restoring the stock firmware.
www.thecustomdroid.com
Try the fastboot method...
Try service fastboot rom, works on locked bootloader. If doesn't help go to mi service
[ENGINEERING] [ROM] [VENUS] Official Engineering Firmware for Venus (Xiaomi Mi 11)
************************************************************* ————————-ENG ROM for Venus —————————- ************************************************************* FAQ: 1) What's an "Engineering ROM?" An engineering rom is a ROM that's used by...
forum.xda-developers.com
dromaczek said:
Try service fastboot rom, works on locked bootloader. If doesn't help go to mi service
Click to expand...
Click to collapse
Can you help me how do to it?
Turn phone in fastboot mode and ruh flash with format from link above
1) Turn off phone
2) Turn on with volume down pressed, phone enter fastboot mode
3) connect to PC
4) chceck in control panel in windows - is see by system...
5) downloaded zip file with enginering rom, unpack and run flash bat or something like this (admin)
If phone works flash normal rom, if dont -> go to mi service
rAyNEix2 said:
Install MIUI Fastboot ROM using Xiaomi’s Mi Flash Tool [Guide]
Learn how to install Fastboot ROM on Xiaomi, Redmi, and Poco devices using the Mi Flash Tool. Useful for unbricking, fixing bootloops, and restoring the stock firmware.
www.thecustomdroid.com
Try the fastboot method...
Click to expand...
Click to collapse
This is for unbrick phone
zdns said:
This is for unbrick phone
Click to expand...
Click to collapse
and you need what? polish the display?
does fastboot work for you or does your PC show qloader 9008?
xpxrx1 said:
and you need what? polish the display?
does fastboot work for you or does your PC show qloader 9008?
Click to expand...
Click to collapse
I try it and i get error failed "erase is not allowed in lock state".
How can i unlock the bootloader?
zdns said:
I try it and i get error failed "erase is not allowed in lock state".
How can i unlock the bootloader?
Click to expand...
Click to collapse
what did you do with the phone before it ended "system has been destroyed"? what software did you install last time? what gave you the error "erase is not allowed in lock state", mi flash? please be more specific... have you tried flashing via miflash exactly the same rom you had last time?
and most importantly, is your phone in fastboot or qloader mode? (check windows device manager)
xpxrx1 said:
what did you do with the phone before it ended "system has been destroyed"? what software did you install last time? what gave you the error "erase is not allowed in lock state", mi flash? please be more specific... have you tried flashing via miflash exactly the same rom you had last
Click to expand...
Click to collapse
xpxrx1 said:
what did you do with the phone before it ended "system has been destroyed"? what software did you install last time? what gave you the error "erase is not allowed in lock state", mi flash? please be more specific... have you tried flashing via miflash exactly the same rom you had last time?
Click to expand...
Click to collapse
xpxrx1 said:
what did you do with the phone before it ended "system has been destroyed"? what software did you install last time? what gave you the error "erase is not allowed in lock state", mi flash? please be more specific... have you tried flashing via miflash exactly the same rom you had last time?
Click to expand...
Click to collapse
The phone suddenly turned off in the middle of a call and came back on with the message I wrote. I didn't try to install a ROM before now I'm trying to solve the problem and figure out if it's a software or hardware problem
xpxrx1 said:
and most importantly, is your phone in fastboot or qloader mode? (check windows device manager)
Click to expand...
Click to collapse
On the screen on the phone FASTBOOT
zdns said:
On the screen on the phone FASTBOOT
Click to expand...
Click to collapse
Do you know what version of the software you had? EU, MI, CN...? (example V13.0.7.0.skbEUxm)
use xiaomi mi flashtool pro
No
zdns said:
No
Click to expand...
Click to collapse
Where are your from? Do you have a box?
No
xpxrx1 said:
Do you know what version of the software you had? EU, MI, CN...? (example V13.0.7.0.skbEUxm)
Click to expand...
Click to collapse
xpxrx1 said:
Where are your from? Do you have a box?
Click to expand...
Click to collapse
What do you mean box?
when you google "mi 11 box" what does it find? that's what i meant...
Are you ashamed of where you're from? when you don't answer...
find out for yourself what kind of software you had and try to flash it through whatever you see fit... I don't have time or mood for these stupid questions when you can't cooperate... this is communication like with a 12-year-old child...
good luck...