Can't connect with fastboot or adb, Fastboot Reason: Flash Failure - X 2014 Q&A, Help & Troubleshooting

Hi,
A few months ago, I tried flashing e-os on my old Moto X (2014). Something went wrong and I didn't look at it until now because of a lack of time.
When I connect the phone to my computer or a power brick, it goes immediately in AP Fastboot Flash Mode (S). I think I flashed something wrong in the wrong place. I can't connect with adb or fastboot (tried the fastboot from the package in the openSUSE linux repositories, the one from the android-platform tools on the android website and linux-fastboot from mfastboot), I tried different USB-cables (even one labeled as a "data cable") and ports.
The screen looks like this:
AP Fastboot Flash Mode (S)
30.BE (sha-34b7ccb, 2015-04-22 12:57:17)
eMMC: 16GB Sandisk RV=06 PV=07 TY=17
DRAM: 2048MB Samsung S4 SDRAM DIE=4Gb
Up Time: 10 minutes
Device is UNLOCKED. Status Code: 3
Battery OK
Transfer Mode: USB Connected
Boot Mode Selection Menu
Vol Up Selects, Vol Down Scrolls
Normal Powerup
Recovery
Factory
Barcodes
BP Tools
Fastboot REason: Flash Failure
USB connected
Selecting Recovery shows the "bootloader unlocked" warning screen and then an android on his back with a red warning triangle ().
Selecting Factory or BP Tools leads to the warning screen and then the menu again.
Normal Powerup gives the warning screen, a black screen (and vibrates, probably it restarts), the warning screen again and then the dead android with the warning triangle.
I don't remember what exactly I did last time.
Thank you for any advice.
Kind regards,
Twijg

https://gist.github.com/smac89/251368c8df2ccd645baedc3e1238fdb4

Thank you for the reply.
No new usb-device showed up, which is weird. I tried all three ports and two different cables. The ports at least work with my keyboard and mouse.
This is an output I got, it was the same with or without the phone attached:
Code:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 004: ID 13d3:5458 IMC Networks USB2.0 HD UVC WebCam
Bus 003 Device 003: ID 413c:2003 Dell Computer Corp. Keyboard SK-8115
Bus 003 Device 006: ID 13d3:3563 IMC Networks Wireless_Device
Bus 003 Device 002: ID 046d:c063 Logitech, Inc. DELL Laser Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0781:55ae SanDisk Corp. Extreme 55AE
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I also tried again with my keyboard and mouse unplugged.

disconnect usb, power off phone, press and keep holding both volume keys, connect usb

Thank you, that helped indeed. I was able to connect with fastboot and flash the recovery img.
That issue is solved now.
I now have a different problem where selecting recovery leads to an endless series of restarts to the unlocked bootloader warning screen. If you happen to know what the reason for that could be... I'll go looking online and in the fora as well and edit this message with the link to a solution if I find one.
Thank you again!

Related

[solved] bricked my Captivate

I tried flashing ICS_4.0.3_r1-RC1.0.1-i897.zip to my Captivate, now my captivate won't go past the AT&T screen.
I was on CM7.1 before I attempted to flash. From what I understand, if I can get into Recovery mod I can flash CM7 to my phone and start this entire process over again. However, I downloaded ADB and now I'm not sure what to do to fix this. I have my phone in Download mode and it's connected to my laptop.
I don't think ADB recognizes my phone. What should I do?
Code:
[email protected]:/home/kenny2/AndroidSDK/platform-tools# adb reboot recovery
error: device not found
[email protected]:/home/kenny2/AndroidSDK/platform-tools# adb devices
List of devices attached
[email protected]:/home/kenny2/AndroidSDK/platform-tools# lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 010: ID 04e8:6601 Samsung Electronics Co., Ltd Z100 Mobile Phone
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[email protected]:/home/kenny2/AndroidSDK/platform-tools#
I am using Ubuntu 11.04, 64 bit - if that matters.
Adb doesn't work in download mode
Flash stock. Then follow install instructions to flash any ROM you want.
Where can I get the stock roms? I just downloaded one from this thread but all I got was a rar file with an exe file inside.
I need something I can load up from Heimdall. I'll try running the exe file through WINE but I don't think it will work.
Edit: Confirmed, that does not work in Wine.
Edit2: Trying this now.
Hit the sig link below. Heimdall Stock KB2. After it's downloaded, right click/permissions/Mark as executable. Then just open with java.
Thanks for the tip mrhaley30705. However, I fixed it before I saw your link. I used this: http://forum.xda-developers.com/showthread.php?p=17050435
Which gave me SGH-i897-UCKH3-One-Click.jar. This put my phone on 2.3.4. Problem solved as I'm no longer bricked.
Glad you got it going.

[Q] Xperia Z1 Hard Bricked :(

Hi
My Xperia Z1 is hard bricked
won't boot ( earsed everything)
batter is empty (is it chrges while fastoob or flash mode?)
trying to flash new software but sometimes says ERROR 31 device you connected pc is not fuctioning (sry bad english)
i tryed Flashtool, EMMA, PC Companion, SUS
my problem here is how to install new soft
McP6ts said:
Hi
My Xperia Z1 is hard bricked
won't boot ( earsed everything)
batter is empty (is it chrges while fastoob or flash mode?)
trying to flash new software but sometimes says ERROR 31 device you connected pc is not fuctioning (sry bad english)
i tryed Flashtool, EMMA, PC Companion, SUS
my problem here is how to install new soft
Click to expand...
Click to collapse
Using Linux. Type this command on Terminal
Code:
lsusb
Is this output come
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 0fce:519e Sony Ericsson Mobile Communications AB
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0bda:0139 Realtek Semiconductor Corp. Card reader
Bus 001 Device 004: ID 058f:a014 Alcor Micro Corp. Asus Integrated Webcam
Bus 001 Device 003: ID 13d3:3304 IMC Networks
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Click to expand...
Click to collapse

[Q&A] [UNBRICK][BETA] HTC Unbricking Project

Q&A for [UNBRICK][BETA] HTC Unbricking Project
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Help!!!!!
Help!
[email protected]:~/Загрузки$ sudo ./revive.sh
HTC Unbricking Project M7_UL 0.6beta
Detecting bricked device..
Device can't be found, check connections. Aborting
[email protected]:~/Загрузки$
demice84 said:
Help!
[email protected]:~/Загрузки$ sudo ./revive.sh
HTC Unbricking Project M7_UL 0.6beta
Detecting bricked device..
Device can't be found, check connections. Aborting
[email protected]:~/Загрузки$
Click to expand...
Click to collapse
Did you follow the procedure notes in Post #3?
Are you using a USB 2 port?
Can you change cables or ports?
majmoz said:
Did you follow the procedure notes in Post #3?
Are you using a USB 2 port?
Can you change cables or ports?
Click to expand...
Click to collapse
Yes everything corresponds
I entered watch -n ,1 lsusb:
Bus 002 Device 048: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 034: ID 24ae:2001
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I entered sudo dmesg -c:
[12438.236833] usb 2-4: USB disconnect, device number 48
[12438.237222] zte_ev ttyUSB0: zte_ev converter now disconnected from ttyUSB0
[12438.237260] zte_ev 2-4:1.0: device disconnected
[12441.688302] usb 2-3: new high-speed USB device number 49 using ehci-pci
[12441.832849] usb 2-3: New USB device found, idVendor=05c6, idProduct=f006
[12441.832861] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[12441.845421] hid-generic 0003:05C6:F006.00EB: hiddev0,hidraw2: USB HID v1.11 Device [HID 05c6:f006] on usb-0000:00:1d.7-3/input0
[12455.098456] usb 2-3: USB disconnect, device number 49
[12455.368161] usb 2-3: new high-speed USB device number 50 using ehci-pci
[12455.500812] usb 2-3: New USB device found, idVendor=05c6, idProduct=9008
[12455.500816] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12455.500819] usb 2-3: Product: QHSUSB_DLOAD
[12455.500822] usb 2-3: Manufacturer: Qualcomm CDMA Technologies MSM
[12455.501114] zte_ev 2-3:1.0: zte_ev converter detected
[12455.501236] usb 2-3: zte_ev converter now attached to ttyUSB0
[12485.284801] usb 2-3: USB disconnect, device number 50
[12485.285165] zte_ev ttyUSB0: zte_ev converter now disconnected from ttyUSB0
[12485.285201] zte_ev 2-3:1.0: device disconnected
[12487.488074] usb 2-4: new high-speed USB device number 51 using ehci-pci
[12487.633912] usb 2-4: New USB device found, idVendor=05c6, idProduct=f006
[12487.633925] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[12487.646404] hid-generic 0003:05C6:F006.00EC: hiddev0,hidraw2: USB HID v1.11 Device [HID 05c6:f006] on usb-0000:00:1d.7-4/input0
[12500.978946] usb 2-4: USB disconnect, device number 51
[12501.248160] usb 2-4: new high-speed USB device number 52 using ehci-pci
[12501.381149] usb 2-4: New USB device found, idVendor=05c6, idProduct=9008
[12501.381162] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12501.381170] usb 2-4: Product: QHSUSB_DLOAD
[12501.381177] usb 2-4: Manufacturer: Qualcomm CDMA Technologies MSM
[12501.381735] zte_ev 2-4:1.0: zte_ev converter detected
[12501.382362] usb 2-4: zte_ev converter now attached to ttyUSB0
demice84 said:
Yes everything corresponds
Click to expand...
Click to collapse
Did you check the MD5 of the 32bit HTC One download?
Code:
MD5: [B]c9b8c0ea1700edfda1d69a2491e59aa5[/B]
Are you using the 32bit Linux? It was reported in the thread that 64bit was causing issues.
If you haven't already, I would go back and re-read the the first three post to make sure I didn't forget something. Then, I would read the last eight to ten pages of the thread to see if someone else had a similar experience.
@dexter93 can you help demice84, I just don't have the experience with your process. Thanks!
htc one m7 qususb_dload
i tried the method with Ubuntu 12.04 32 bit system and the device is not detected at all
although i tried to boot up the phone with my hand
kindly advice
Solved
Hi,
I was having the wifi not turning on issue. My phone was rooted so no warranty. Therefore, I started flashing all sort of different roms, both stock as well as custom ones (I understand a little bit of it) and all was ok. Then I flashed the Developer Edition and my phone was completely bricked. No LED, no charging not turning on nothing. I searched all over and everyone is saying: Dead no solution only Jtag or HTC can solve it. I kept on thinking...but somehow my computer still recognizes the phone so something must be possible. So I didnt give up and kept searching. Then I found your post. I run your file and yes...it worked. My phone came back alive! So thank you so much. I am not able to donate at this moment, but did want to let you know that your mehtod worked for me!
Wifi problem still exists, ie will not turn on. But other than that I have a working phone again.
Thanks and all the best.
Successful unbricking
I just want to post and say a mega thank you dexter93 for this process. It unbricked my HTC one M7 without any issues.
FF
Bricked htc one m7
hello can any one help me here?
the unbrick script doesnt detect it
[email protected]:~/Downloads$ sudo ./revive.sh
HTC Unbricking Project M7_UL 0.6beta
Detecting bricked device..
Device can't be found, check connections. Aborting
[email protected]:~/Downloads$ lsusb
Bus 001 Device 006: ID 055d:3021 Samsung Electro-Mechanics Co.
Bus 001 Device 021: ID 05c6:f006 Qualcomm, Inc.
Bus 001 Device 003: ID 0951:1607 Kingston Technology DataTraveler 100
Bus 001 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 1c4f:0003 SiGma Micro HID controller
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c311 Logitech, Inc. Y-UF49 [Internet Pro Keyboard]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[email protected]:~/Downloads$
the brick happened when i installed cyanogenmod one click installer... it booted up correctlt then it received 2 updates ... the second one the phone never turned on or charged again
when i do a dmesg command in terminal i get many logs like this.... the phone connects and disconnects from the pc just like it does in a windows pc
evice [HID 05c6:f006] on usb-0000:00:1d.7-6/input0
[ 1007.938761] usb 1-6: USB disconnect, device number 69
[ 1008.328074] usb 1-6: new high-speed USB device number 70 using ehci-pci
[ 1008.473962] usb 1-6: New USB device found, idVendor=05c6, idProduct=f006
[ 1008.473973] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1008.486244] hid-generic 0003:05C6:F006.0043: hiddev0,hidraw3: USB HID v1.11 Device [HID 05c6:f006] on usb-0000:00:1d.7-6/input0
[ 1011.857415] usb 1-6: USB disconnect, device number 70
[ 1012.244093] usb 1-6: new high-speed USB device number 71 using ehci-pci
[ 1012.389460] usb 1-6: New USB device found, idVendor=05c6, idProduct=f006
[ 1012.389471] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1012.401894] hid-generic 0003:05C6:F006.0044: hiddev0,hidraw3: USB HID v1.11 Device [HID 05c6:f006] on usb-0000:00:1d.7-6/input0
[email protected]:~/Downloads$
Hope you can help me please
I have this issue what can i do plz help
Help please!
i think bricked my HTC One 801n (M7_UL)
Ubuntu (14.10) terminal writes the dmesg command.
[5955.455843] usb 1-3: USB disconnect, device number 3
[5958.773671] usb 1-2: new high speed USB device using ehci-pci Number 4
[5958.912343] usb 1-2: New USB device found, idVendor = 0bb4, idProduct = 0ff0
[5958.912356] usb 1-2: New USB device strings: Mfr = 1, Product = 2, serialNumber = 3
[5958.912363] usb 1-2: Product: Android 1.0
[5958.912369] usb 1-2: Manufacturer: htc, Inc.
[5958.912374] usb 1-2: serialNumber: SH35SW905694
my phone is completely different show than the others. Works with fastboot, but not the recovery. Bloom in red text below, Active cmdline overflow! (1028 Bytes). The project can be improved with this phone? If so, how? Volume down + power button does not work. Volume up + power button either. only the Bootloader comes into fastboot and nothing else. Recovery had flash. It does not work. Any other ideas? I would be grateful! Sorry for the rough speech, but I can not speak English. I use a translator!
szoszi said:
i think bricked my HTC One 801n (M7_UL)
Ubuntu (14.10) terminal writes the dmesg command.
[5955.455843] usb 1-3: USB disconnect, device number 3
[5958.773671] usb 1-2: new high speed USB device using ehci-pci Number 4
[5958.912343] usb 1-2: New USB device found, idVendor = 0bb4, idProduct = 0ff0
[5958.912356] usb 1-2: New USB device strings: Mfr = 1, Product = 2, serialNumber = 3
[5958.912363] usb 1-2: Product: Android 1.0
[5958.912369] usb 1-2: Manufacturer: htc, Inc.
[5958.912374] usb 1-2: serialNumber: SH35SW905694
my phone is completely different show than the others. Works with fastboot, but not the recovery. Bloom in red text below, Active cmdline overflow! (1028 Bytes). The project can be improved with this phone? If so, how? Volume down + power button does not work. Volume up + power button either. only the Bootloader comes into fastboot and nothing else. Recovery had flash. It does not work. Any other ideas? I would be grateful! Sorry for the rough speech, but I can not speak English. I use a translator!
Click to expand...
Click to collapse
Try here >> http://forum.xda-developers.com/sho...ighlight=active+cmdline+overflow#post52367879
Thanks
Thanks!
thanks a lot for this. Worked like a charm. After upgrading my firmware from 1.29.1540.17 to 5.11.1540.9 I was stuck in this mode where the phone wouldn't power up. This tool helped me bring it back to life. Thanks!!
help a poor noob
hei i'm pretty new on Ubuntu and i would ask if someone could have some spare time to help this poor noob i've created the live usb with ubuntu but ... as i said i'm new and ubuntu beats me Thank you
Problems extracting tar files
Guys, I am having problems extracting the emmc_recover_v4a1.tar.gz. Im running ubuntu-14.04.1-desktop-amd64
janfar said:
Guys, I am having problems extracting the emmc_recover_v4a1.tar.gz. Im running ubuntu-14.04.1-desktop-amd64
Click to expand...
Click to collapse
In the same directory, type the following in your terminal emulator.
Code:
/path/to/files $ tar -xzvf emmc*
Edit: note to type what follows the $ above, your shell should show the working path and a $ sign for user accounts and a # if you're signed in as root (same as on Android).
If you get an error you probably need to redownload (e.g. CRC error). You can check the md5 of the download using the md5sum command to confirm if the download is good/bad.
genseng said:
In the same directory, type the following in your terminal emulator.
Code:
/path/to/files $ tar -xzvf emmc*
Edit: note to type what follows the $ above, your shell should show the working path and a $ sign for user accounts and a # if you're signed in as root (same as on Android).
If you get an error you probably need to redownload (e.g. CRC error). You can check the md5 of the download using the md5sum command to confirm if the download is good/bad.
Click to expand...
Click to collapse
I have tried all the codes available. I dont know if is an issue with the download as I am having to download it on a windows 7 machine and then transfer it to the Ubuntu machine using a pendrive. Ubuntu machine does not have internet.
janfar said:
I have tried all the codes available...
Click to expand...
Click to collapse
You lost me...
Ubuntu will have the md5sum program built in. After transferring the file to the Ubuntu system, generate an md5sum and compare it to the one on the download page. If it matches then it worked.
genseng said:
You lost me...
Ubuntu will have the md5sum program built in. After transferring the file to the Ubuntu system, generate an md5sum and compare it to the one on the download page. If it matches then it worked.
Click to expand...
Click to collapse
Lol... i meant I tried all the untarring codes I could find on the internet including the one you asked me to try.
I will try to md5sum and see if it gives the right value. How do I run that code?
So I managed to run the md5sum and the number does not match what is on the DL page.

Can't get ADB running

Hi,
i can't get ADB running. I activated it in the developer options and tried also checking and unchecking the usb 2 option.
On my Computer i'm running Linux Mint 17.1.
When imt checking for adb devices it's just an empty list.
I also tried this Instruction but it didn't help.
I really don't know what to do.
nme1337 said:
Hi,
i can't get ADB running. I activated it in the developer options and tried also checking and unchecking the usb 2 option.
On my Computer i'm running Linux Mint 17.1.
When imt checking for adb devices it's just an empty list.
I also tried this Instruction but it didn't help.
I really don't know what to do.
Click to expand...
Click to collapse
connect the device to a usb port and show the output of command
Code:
lsusb
Tommmii said:
connect the device to a usb port and show the output of command
Code:
lsusb
Click to expand...
Click to collapse
Code:
Bus 002 Device 003: ID 1532:010e Razer USA, Ltd
Bus 002 Device 004: ID 2b4c:1015
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1210:25f4 DigiTech
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
while
Code:
Bus 002 Device 004: ID 2b4c:1015
is my Phone
Also my Phone doesn't ask for the permissions for the PC to connect with ADB.
And I tried switching between mtp and ptp.
nme1337 said:
Code:
Bus 002 Device 003: ID 1532:010e Razer USA, Ltd
Bus 002 Device 004: ID 2b4c:1015
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1210:25f4 DigiTech
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Click to expand...
Click to collapse
what's in your file /etc/udev/rules.d/51-android.rules ?
Tommmii said:
what's in your file /etc/udev/rules.d/51-android.rules ?
Click to expand...
Click to collapse
****, somehow i'm the biggest idiot i misspelled and wrote 1013 instead of 1015.
feel so dump now. i was looking so often at it and didn't realize... sry

[SOLVED] Stock Nexus 6 in endless bootloop (without USB debugging!)

Hi!
:crying:
Help needed! My 10 year old kid has Motorola Nexus 6 (XT1100). The phone is a second hand phone but it should be in original condition? Service shop upgraded a new battery about 2 months ago.
Problem:
For some reason the phone has went into an endless bootloop (Google -logo screen, [vibration], reboot cycle). By pressing the volume down it goes to the bootloader (see details below).
Code:
AP Fastboot Flash Mode (secure)
BL: moto-apq8084-72.04 (sha-b11eacf, 2017-07-13 16:59:20)
Baseband: D4.01-9625-05.45+FSG-9625-02.117
Product/Variant: shamu XT1100 64GB P3A0
Serial Number: ZX1G5237TV
CPU: APQ8084 ES.1
eMMC: 64GB Hynix RV=07 PV=03 TY=57
DRAM: 3072MB Samsung S8 SDRAM DIE=6Gb
Console [NULL]: null
Battery OK (Charging)
Device is LOCKED. Status Code: 2
Transfer Mode: USB Connected
Trouble shooting:
In Bootloader clicking "Factory Mode" does nothing.
Can't put device to USB debugging mode as it is in bootloop?
https://developer.android.com/studio/debug/dev-options
Can't do full OTA update image as "adb reboot recovery" command do not recognize the device (see below)
https://developers.google.com/android/ota
Tried to follow the beginners guide without success as command [fastboot oem unlock] did not work!
[HOW-TO] The Nexus 6 All-In-One Beginner's Guide
https://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
I don't know what to do next? Please help :crying::crying::crying:
I connected it to my Ubuntu 18.04LTS laptop with USB cable.
Code:
$ lsusb
Bus 002 Device 005: ID 18d1:4ee0 Google Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$ adb devices
List of devices attached
$ adb reboot recovery
error: no devices/emulators found
$ fastboot devices -l
ZX1G5237TV fastboot usb:2-1
$ fastboot oem unlock
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.006s
$ fastboot reboot
rebooting...
finished. total time: 0.151s
$
ADB without USB Debugging on?
I don't have USB debugging enabled. Otherwise I would solve it like this! Still waiting for a solution!
https://www.youtube.com/watch?v=Vscps1gNn0U
Connect phone with USB cable to computer
Start phone bootloader by pressing power and volume down
Select recovery mode
Open Recovery menu by pressing power and volume up
Check your software version (e.g. 7.1.1/N6F27M/4299435) and download the full OTA image version
https://developers.google.com/android/ota
select from Phone Recovery menu APPLY UPDATE FROM ADB
check from computer that ADB DEVICES command can see the phone in sideload mode
Execute ADB SIDELOAD [IMAGE.ZIP] command
[SOLVED]
Here's the solution! Thank you for the help :good::good::good::good:
Start phone bootloader by pressing power and volume down
Select recovery mode
Open Recovery menu by pressing power and volume up
Select Wipe data/Factory reset
Select Wipe cache partition
Select Reboot system now
how to apply solution when recovery mode screen is dead android with red triangle and "No Command" text?
janekw said:
how to apply solution when recovery mode screen is dead android with red triangle and "No Command" text?
Click to expand...
Click to collapse
Did you press the volume up key?
yes
janekw said:
yes
Click to expand...
Click to collapse
Interesting. Pressing the volume up key is how you get into the stock recovery when Andy is laying on his back. That may mean a bad volume control. In your case you may have little choice but to flash a factory image by entering the device's bootloader and using fastboot.

Categories

Resources