I'm trying to set up an Octoprint server on my old Note5 and as a result I need to be able to charge while using an OTG cable. I figured out that whenever I plug in a cable into the micro usb port, it disables wireless charging. Is there any way to override this?
Related
Alright so i bought a usb powered hub, a usb OTG cable, and a usb DAC. I can get the usb DAC working fine by hooking everything up but i cannot get the Nook to charge while in USB host mode. Is this a problem with the settings on the Nook or the USB hub i bought? Also is there any way to charge the nook at 2A while in USB host? I assume this would require a custom cable but i have found very limited information on the internet.
desitdt said:
Alright so i bought a usb powered hub, a usb OTG cable, and a usb DAC. I can get the usb DAC working fine by hooking everything up but i cannot get the Nook to charge while in USB host mode. Is this a problem with the settings on the Nook or the USB hub i bought? Also is there any way to charge the nook at 2A while in USB host? I assume this would require a custom cable but i have found very limited information on the internet.
Click to expand...
Click to collapse
I could be wrong or downright delusional, but I didn't think you could (or worse yet, could cause damage if you tried).
Sent from my Nexus 7 using xda premium
On my desk, I have an old but reliable USB 2.0 hub, with your standard micro USB cable plugged into one of the ports. On my old phones (Nexus 5, Galaxy S3, HTC One), they would all charge from this cable, even when the hub was not plugged into a host. However, the Z3C seems to not charge at all when plugged into this cable, unless the USB hub is plugged into my Macbook. Anybody else seen this? I know that the hub won't put out much current, but it was awfully convenient to always have a charging cable on my desk regardless of what my laptop was doing.
Thanks!
Old post so probably not needed anymore, but just tested it over here and it just works.
A standaard generiek usb2.0 hub with external powersuply, connected with a usb 2 micousb kabel to the microusb poort of the sony z3c starts charging. It makes nog difference if i put the doc in between for magnetic charging, that works to.
Hello,
I have an AUKEY CB-C32 USB hub with Ethernet adapter. I tried (just out of interest) if this device is working with my Nexus 5X. But the problem is, that my phone does not recognize the adapter. Nothing happens when I connect the adapter to the Nexus. Also the LED indicator on the adapter does not shine.
Why is this device not recognized?
Best regards,
wewa
PS: Yes, I connected the correct cable/port to my phone.
Hello,
is there any way to disable reverse charging on P10. I use usb c to micro usb cable to connect DAC Fiio Q1 mk.2 it works great, but phone charges the DAC. So it limits the useability, because of fast discharge. I also tried classic OTG cable and micro USB OTG cable with original Huawei reduction, both with same result = reverse charging the DAC. In developer settings is default USB mode set to MTP. After plugin it goes to reverse charging and after setting it back to MTP in status bar it stops charging due to DAC but after 2 sec. it starts again.
Is there any way to disable it in software? Because on head-fi Fiio engeneer wrote how to solve it trougth cable mod.
But software solution will be much easier.
Thanks.
I have this same issue can someone help please?!
Does anyone know of an OTG-Y cable which will allow a USB OTG device to be connected to the Tab S2 while charging at the same time?