Database Develop

Required - Samsung S3 LTE UK ORANGE Stock firmware

Hi,
I have searched everywhere online and I cannot find anywhere that has the samsung S3 LTE UK stock firmware.
Basically i need this so that I can give my phone into samsung, they have had a look at the phone itself and have said it has a 'custom' firmware and has been rooted also checked and they could see the warranty was void.
Please can someone help? A valid download or link is much appreciated also instructions on how to get it back to factory is also appreciated.
This forum is my last option before I give up
Thank you

bullet252014 said:
Hi,
I have searched everywhere online and I cannot find anywhere that has the samsung S3 LTE UK stock firmware.
Basically i need this so that I can give my phone into samsung, they have had a look at the phone itself and have said it has a 'custom' firmware and has been rooted also checked and they could see the warranty was void.
Please can someone help? A valid download or link is much appreciated also instructions on how to get it back to factory is also appreciated.
This forum is my last option before I give up
Thank you
Click to expand...
Click to collapse
In download mode (power + volume down + home) does your phone say "Knox Warranty Void: 1"?

ArkThompson said:
In download mode (power + volume down + home) does your phone say "Knox Warranty Void: 1"?
Click to expand...
Click to collapse
it does yes

bullet252014 said:
it does yes
Click to expand...
Click to collapse
I'm pretty sure that's impossible to get around, even if you flash stock firmware it will still be like that. What is actually wrong with your phone? Is the problem software or hardware related? It could be worth checking if having it set as 1 voids the warranty in the UK, I think it differs from place to place. You can find stock firmware at sammobile.

ArkThompson said:
I'm pretty sure that's impossible to get around, even if you flash stock firmware it will still be like that. What is actually wrong with your phone? Is the problem software or hardware related?
Click to expand...
Click to collapse
Main problem with the phone is signal drops and battery drain, really really poor. Imagine someone ring you and there is some signal but call does not come through or when you are on a call it completely drops and you try ringing back but does not go through at all.
I have queried this with orange/ee or whoever they are called now and they have said it is something wrong with the firmware.
Current config is:
Model:
GT-I9305
Android version 4.3
Base band version:
I9305XXUEMK1
Kernal:
3.0.31-2051278
[email protected]#1
Build number:
JSS15J.I9305XXUEAML5
SELinux Status:
Enforcing
SEPF_GT-I9305_4.3_0010
What do you think?

bullet252014 said:
Main problem with the phone is signal drops and battery drain, really really poor. Imagine someone ring you and there is some signal but call does not come through or when you are on a call it completely drops and you try ringing back but does not go through at all.
I have queried this with orange/ee or whoever they are called now and they have said it is something wrong with the firmware.
Current config is:
Model:
GT-I9305
Android version 4.3
Base band version:
I9305XXUEMK1
Kernal:
3.0.31-2051278
[email protected]#1
Build number:
JSS15J.I9305XXUEAML5
SELinux Status:
Enforcing
SEPF_GT-I9305_4.3_0010
What do you think?
Click to expand...
Click to collapse
Have you done anything to the phone other than rooting it?

ArkThompson said:
Have you done anything to the phone other than rooting it?
Click to expand...
Click to collapse
apart from putting a custom rom onto it and rooting it to get it back to stock no

bullet252014 said:
apart from putting a custom rom onto it and rooting it to get it back to stock no
Click to expand...
Click to collapse
You can find Odin flashable stock firmware at http://www.sammobile.com/firmwares/ . You have to sign up to download them though. Was your phone working properly with the custom rom?

ArkThompson said:
You can find Odin flashable stock firmware at http://www.sammobile.com/firmwares/ . You have to sign up to download them though. Was your phone working properly with the custom rom?
Click to expand...
Click to collapse
It has never been working properly ever, always had problems with all samsung galaxy mobiles that i have had, I have downloaded this version, I9305XXUEML5_I9305EVRGML3_EVR
Latest firmware info
PDA: I9305XXUEML5
CSC: I9305EVRGML3
MODEM: I9305XXUEMK1
Added: 2014-01-09
my samsung is the LTE version on the EE network will it work?

Still no joy, can anyone help? My signal has gone even worse from what it was.

http://www.sammobile.com/firmwares/1/?model=GT-I9305&pcode=EVR#firmware

bullet252014 said:
Still no joy, can anyone help? My signal has gone even worse from what it was.
Click to expand...
Click to collapse
Try flashing the new 4.4.4 STOCK-Official ROM
http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
It fixed all my problems (battery draining on 4.3 and after that when i installed a recovery and do a restore it was stuck at Samsung logo)
Installing the above rom FIXED all of them.

Anyone got a baseband/modem on EE/Orange? I think that is what i need.

Just updated to the new 4.4 and my phone is slower than before Poor signal issue still exists

Anyone? Really thinking of throwing this phone in the trash and buying a new iphone

Here's a thought why not contact Orange / EE or would that require too much effort
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

N910-U Lollipop update is Here

Just got my update finally!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Please share ota file, I'm dying ATM.

zhable said:
Please share ota file, I'm dying ATM.
Click to expand...
Click to collapse
If i knew how i totally would stick it on megaupload.
know a guide?

Guys i love the update! Phone is faster and looks nice
Sent from my SM-N910U using Tapatalk

Update is awesome guys

Fxxk yeah, finally!
Downloading right now

I've got it too. For some reason the drop down menu has changed to an uglier shade of yellow green, the colour of frog excrement.. Otherwise don't really notice significant changes. Samsung has layered the ui so much that it just looks like.. Well Samsung. Not very evident it's lollipop tbh

If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.

LTE-X said:
If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.
Click to expand...
Click to collapse
NVM mine is still unknown after a reset

tomqin said:
NVM mine is still unknown after a reset
Click to expand...
Click to collapse
It must be how Samsung programmed its CSC for the ROM. When the official ROM comes out for your region, you can restore using Kies 3 or Smart Switch. Then, you will get OTA updates as usual like you did before.

LTE-X said:
If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.
Click to expand...
Click to collapse
weird, I flashed NZC (formerly had BRI) and mine was still BRI. I did some benchmarking and I guess it was a little "dirty" and was getting really low results. So I just went into recovery wiped data and cache. Now my device claims to be NZC and works flawlessly. Best of luck

http://forum.xda-developers.com/showpost.php?p=60294513&postcount=1231

Can update samsung note 7000 to lollipop [emoji27]

Has anyone trying rooting using cf auto root after this update - I did and it failed to root my device

Unresponsive touchscreen after Lollipop
Hi there guys,
After updating my Galaxy Note 4 n910U to Lollipop via OTA, the touchscreen just became unresponsive. The update went on smoothly and my phone booted fine and it's on Lollipop now. I can navigate normally using the screen through the S-Pen but it just would not respond to touch. Very frustrating. New device, been waiting for this update and this happens. Please help.
Thanks!

tomqin said:
NVM mine is still unknown after a reset
Click to expand...
Click to collapse
You could try factory reset in recovery followed by a cache wipe and a repeat factory reset. Flash the NZC firmware again. After flashing again go to recovery and do a factory reset followed by a cache wipe and another factory reset. Boot and check if you are able to still see the csc in unknown status.

thx for the tip,
I'll probably wait for the HK version of Lollipop and then go back to the original csc

where is the link?
Nice information but where is the link???!!!

lumao said:
Nice information but where is the link???!!!
Click to expand...
Click to collapse
Bro, you realise you responded to an old old thread? 5.1.1 is next U variant update, not yet arrived

note 5 troubleshooting...

hi guys ,
recently i had bought note5 (sm-n920f), to my dismay it was a rooted phone.i checked its ime (359523062717457) on the net and founded that it was samsung s6 after that i checked by app phoneinfo and founded that it was sm-n920v
now the real problem is that i want to basically update it to marshmallow...?? is it possible ...??
as there are certain feature that are not working as they should...
*private mode is not working
*having difficulty with network signals
*it always shows 4g no matter if i connect to 3g or 2g
*cant print (have installed plugin)
so basically can i update it to m.m...??
will it solve the problems....???
how can i update it....??
https://app.box.com/s/212mmmirwrtzhd9g1i1g9htgr0zpl9rx[/IMG]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

darkknight92 said:
hi guys ,
recently i had bought note5 (sm-n920f), to my dismay it was a rooted phone.i checked its ime (359523062717457) on the net and founded that it was samsung s6 after that i checked by app phoneinfo and founded that it was sm-n920v
now the real problem is that i want to basically update it to marshmallow...?? is it possible ...??
as there are certain feature that are not working as they should...
*private mode is not working
*having difficulty with network signals
*it always shows 4g no matter if i connect to 3g or 2g
*cant print (have installed plugin)
so basically can i update it to m.m...??
will it solve the problems....???
how can i update it....??
https://app.box.com/s/212mmmirwrtzhd9g1i1g9htgr0zpl9rx[/IMG]
Click to expand...
Click to collapse
Normally have difficulty to upgrade because of the mix variant. Just afraid you will softbrick it. But it's your call.
Sent from my SM-G925F

dear can u post from where can i get the required software...

darkknight92 said:
dear can u post from where can i get the required software...
Click to expand...
Click to collapse
You only needs smart switch or odin 3.xx. Google it.
Sent from my SM-G925F

Ok so I went ahead and rooted my phone via odin and now my phone says kernel is not seandroid enforcing. Any way I can fix this. I have the note 5 from tmobile

ninibobeanie said:
Ok so I went ahead and rooted my phone via odin and now my phone says kernel is not seandroid enforcing. Any way I can fix this. I have the note 5 from tmobile
Click to expand...
Click to collapse
It's showing that and not booting?. If you flash correct file for your android version & variant should be no problem.
Sent from my SM-G925F

Dear rosli one last thing before i do it what will be the most compatible firm ware for my note 5
PDA N920VVPU2A0J2
CSC N920 VVZW2A0J2
Baseband N920PVPU 2A016
Bootloader N920PVPU 2A016
Should i opt for sprint or verizon..???

darkknight92 said:
Dear rosli one last thing before i do it what will be the most compatible firm ware for my note 5
PDA N920VVPU2A0J2
CSC N920 VVZW2A0J2
Baseband N920PVPU 2A016
Bootloader N920PVPU 2A016
Should i opt for sprint or verizon..???
Click to expand...
Click to collapse
That's the problem. Your csc seems to be verizon but the baseband belongs to sprint. Have you tried smart switch?. Assuming your phone isn't refurbished(since you said the imei belongs to s6), ss will decide which is suitable for your phone.
Sent from my SM-G925F

Rosli59564 said:
That's the problem. Your csc seems to be verizon but the baseband belongs to sprint. Have you tried smart switch?. Assuming your phone isn't refurbished(since you said the imei belongs to s6), ss will decide which is suitable for your phone.
Sent from my SM-G925F
Click to expand...
Click to collapse
I have used smart switch...it says that
version installed : OFA(SPR)
& Had also tried to do a emergency software recovery theough smart switch but my mobile was not supported ...
I had also connected it to samsung kies but it was not supported tooo

darkknight92 said:
I have used smart switch...it says that
version installed : OFA(SPR)
& Had also tried to do a emergency software recovery theough smart switch but my mobile was not supported ...
I had also connected it to samsung kies but it was not supported tooo
Click to expand...
Click to collapse
Very risky and high chance to brick. As you said it's a combination of 920f, s6 and 920v. I have no idea.
Sent from my SM-G925F

Thanks for the ur time rosli.....

Hi darkknight92,
I'm experiencing the same issue as mentioned by you can you please share how to fix the same. You can mail me @Parik****[email protected]

Convert Korean S10 to International

Hi,
I got a Samsung Galaxy S10 Exynos (SM-G973N), a Korean version. I am not in Korea and don't have Korean SIM so I can't use the phone (SIM card are not recognized).
I need some help to convert it to an international version, preferably an Android 11 version if possible. Current baseband is G973NKOU6FUF3.
Regards.

Hi, did you try to flash the firmware from your country/region? Just download the firmware with Frija if you are on Windows or samload if you are using Linux/Mac and flash with Odin. It's worth a try, cause the phone is basically the same of your country. Obviously since you are flashing a different region, you have to use CSC_OXM_XXXX and not the HOME_CSC_XXXXX. if it sounds confusing you can look at this topic here. Remember to use Smart Switch to backup all your files and apps.

Hi @Cobmaster, No I am actually worried about which firmware to download. The phone is originally from Korea. I don't want the Korean version, as it comes with apps and pre-loaded content in Korean. I would like a more global version. Can I use one from another country like the UK?
Thank you for your help. I used Frija to download the SKC and KOO firmwares.
Ps: For this model there are only Korean different Korean firmwares.

@koutei . I think you can safely download a UK or whatever you prefer, no problem at all.

Cobmaster said:
@koutei . I think you can safely download a UK or whatever you prefer, no problem at all.
Click to expand...
Click to collapse
I tried it, but Odin get stuck when I click on 'Start'.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

koutei said:
I tried it, but Odin get stuck when I click on 'Start'.View attachment 5392345
Click to expand...
Click to collapse
Did you use Odin 3.13?

Cobmaster said:
Did you use Odin 3.13?
Click to expand...
Click to collapse
No, I used Odin v3.14.1

koutei said:
No, I used Odin v3.14.1
Click to expand...
Click to collapse
It's weird. I need more info. Are you using a virtual machine? Which version of Windows? Are you using the stock cable?

Cobmaster said:
It's weird. I need more info. Are you using a virtual machine? Which version of Windows? Are you using the stock cable?
Click to expand...
Click to collapse
No VM. Windows 10. No, I am not because it jiggles and disconnects the phone.

Hi, did you managed to accomplish this? I've searched for days and tried several methods to no avail. I'm starting to think that it is not achievable. If any expert would confirm this, I guess I will abandon the idea . Thanks in advance

I'm also searching did you succeed this convert?
I have G970N (s10e korea) want convert international G970F firmware.
Is it possible? Some people says yes some people said no.

Hi,
I got a Samsung Galaxy S10 Exynos (SM-G973N), a Korean version. I am not in Korea and don't have Korean SIM so I can't use the phone (SIM card are not recognized).
I need some help to convert it to an international version, preferably an Android 11 version if possible. Current baseband is
G973NKSS7FUJ2
Could you help me
Thanks in advance

koutei said:
I tried it, but Odin get stuck when I click on 'Start'.View attachment 5392345
Click to expand...
Click to collapse
I found a reply from a user "billa" on another thread while searching for a way to flash a Global USA Note10+ from an AT&T carrier Note 10+ (Which was successfully done). Below was his/her reply. (I edited the first paragraph and included the modded Odin sourced from a YouTube video.)
You will need to use modded/patched Odin that has the model-ID and SHA hash check disabled, therefore allowing you to flash an unbranded "U1" firmware onto a branded "U" phone and vice versa.
As of now this works on most US Qualcom (QC) models, but an increasing number of international Exynos (EX) models now include a new RMM security which prevents this kind of cross-flashing unless you first disable the RMM, by flashing an RMM-Disabler package through TWRP.
Hope this helps!

koutei said:
Hi @Cobmaster, No I am actually worried about which firmware to download. The phone is originally from Korea. I don't want the Korean version, as it comes with apps and pre-loaded content in Korean. I would like a more global version. Can I use one from another country like the UK?
Thank you for your help. I used Frija to download the SKC and KOO firmwares.
Ps: For this model there are only Korean different Korean firmwares.
Click to expand...
Click to collapse
what was the solution Eventually because i have the same problem

Jantao said:
Hi,
I got a Samsung Galaxy S10 Exynos (SM-G973N), a Korean version. I am not in Korea and don't have Korean SIM so I can't use the phone (SIM card are not recognized).
I need some help to convert it to an international version, preferably an Android 11 version if possible. Current baseband is
G973NKSS7FUJ2
Could you help me
Thanks in advance
Click to expand...
Click to collapse
I have the same issue any solution?

Hi
Please what is the best solution to this problem? I have the same issue.

Hello, look here tried as explained
https://forum.xda-developers.com/t/...-only-no-need-of-paid-apps-boxes-etc.4481487/

Hi, I had the same issue, tried everything but couldn't get the network to work, gave up.
Finally found a working custom rom, now everything is working fine for 5 months.

kevinjr7 said:
Hi, I had the same issue, tried everything but couldn't get the network to work, gave up.
Finally found a working custom rom, now everything is working fine for 5 months.
Click to expand...
Click to collapse
I'll post a detailed steps on how to fix if anyone still needs it.

kevinjr7 said:
I'll post a detailed steps on how to fix if anyone still needs it.
Click to expand...
Click to collapse
please I still need it

Galaxy Note 8 has a reddish rectangular shape in the background.

Hi everyone, I have a Samsung galaxy note 8 SM-N950F/DS rooted from United Arab Emirates. I live in Tanzania. Everything works fine but I wish to unroot it back to its Stock rom mainly because of a reddish rectangular shape in the background with faintly visible Korean insignia (I think it's the developers signature or something, not sure). It also has no software update option (software update not active) so I'm stuck with April 1 2019 security patch update.
However I've some fears because honestly I don't know why it was rooted in the first place.
My fears are if I try to flash stock rom I may get stuck on bootloop or something worse and I wouldn't know how to go about it, I also fear losing its dual Sim option or even god-forbid IMEI. Can someone please walk me through the process, so I can get back to stock rom and finally get rid of this rectangular patch in the background Thanks in advance.

Dumelasimba said:
Hi everyone, I have a Samsung galaxy note 8 SM-N950F/DS rooted from United Arab Emirates. I live in Tanzania. Everything works fine but I wish to unroot it back to its Stock rom mainly because of a reddish rectangular shape in the background with faintly visible Korean insignia (I think it's the developers signature or something, not sure). It also has no software update option (software update not active) so I'm stuck with April 1 2019 security patch update.
However I've some fears because honestly I don't know why it was rooted in the first place.
My fears are if I try to flash stock rom I may get stuck on bootloop or something worse and I wouldn't know how to go about it, I also fear losing its dual Sim option or even god-forbid IMEI. Can someone please walk me through the process, so I can get back to stock rom and finally get rid of this rectangular patch in the background Thanks in advance.
Click to expand...
Click to collapse
I can give you the links that will tell you how to flash stock filmware and how to download the filmware but I can't guarantee that you won't come into any issues, however it is pretty safe to flash stock filmware. With the Korean insignia that you mentioned, does this always appear even when using different apps? If so this could be a screen burn in where flashing stock won't get rid of it.
To download stock filmware use this great PC program "Frija" just put in you model number and your CSC code and it will download the latest filmware (For your CSC code go to settings/about phone/software information/under service provider SW ver to see your 3 digit code, for example mine is BTU) It is a free program and you download at a decent speed.
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
Then just follow the steps in this post on how to download Odin and flash the filmware you downloaded using Odin. When selecting the CSC package for Odin use the one with "home" written in it as there are 2 in the zip file you download using Frija.
How to update your Samsung Galaxy smartphone and install official firmware
Follow these instructions to manually install Android updates through recovery, and full firmware using Odin on Samsung Galaxy smartphones.
www.xda-developers.com

Thank you very much sir, yes this red rectangular shape in the background is there permanently no matter which app I'm using and it's especially more visible when the screen is blank(white). Thanks for the PC app link. I'll try and post a reply here.
Screen burn?! I don't think so ( I could be wrong) but it's situated symmetrically in the middle of the screen covering the left to right. Upper and lower parts of the screen are left out. I'll try to post it's image though it may be difficult to see it because of it's faintness.

Dumelasimba said:
Thank you very much sir, yes this red rectangular shape in the background is there permanently no matter which app I'm using and it's especially more visible when the screen is blank(white). Thanks for the PC app link. I'll try and post a reply here.
Screen burn?! I don't think so ( I could be wrong) but it's situated symmetrically in the middle of the screen covering the left to right. Upper and lower parts of the screen are left out. I'll try to post it's image though it may be difficult to see it because of it's faintness.
Click to expand...
Click to collapse
Your welcome.
It does sound like screen burn in because it's always there regardless of the app being used.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

That's how the screen looks

Dumelasimba said:
That's how the screen looks
Click to expand...
Click to collapse
I can't see anything but that could be down to my eyes.