My name is Kumar
I have an issue my X88 pro 10 android 11 cannot connect to a WiFi after key-in the password it shows check password and try again but when I try to connect to my mobile hot-spot it can connect. After try changing my password and reconnect back still show the same. May I know what is the problem. Or should I need to do any settings on router page. Please advice me.
Welcome to XDA Development and Enjoy the forums
Cheers
Related
Hi everyone,
I heard about this forum and hope you can help me to overcome my wi-fi issues.
I have TYTN II with WM6.0.
I have unsecure wireless connection at home and secure access point connection with certificate at work. For both of these networks, i can see the available network when i click wi-fi and when i click the available network and click connect, connecting appears on the screen and then it become available or unavailable instead of connected. However, i could connect a few times but the connection had gone in a fes minutes.
I tried to connect same AP's with my labtop, and i did.
Do you have any idea about my device's issues ?
Help me pls.
Thanks in advance.
Hi and welcome to the forum.
The first thing to try is this:
Start up your Communication Manager application
Tap on Settings > Wireless LAN
On the settings page, tap on the 'Power Mode' tab and make sure that the slider is all the way to the left ('Best Performance').
Close the settings page
Close Communication Manager
Try connecting again.
This worked for me!
Good luck.
http://forum.xda-developers.com/showthread.php?t=350206&highlight=cisco
it was about cisco WLSE! lucky me, i realized this post and fixed it on WLSE..
thanks anyway.
Regards to all members of xda forum
as the title says, I have a problem with connecting to any wifi network, already spent two days searching different forums, I've tried various CUSTOM ROM (zeus, miui, stock 2.2.2), but without success, currently using ParanoidAndroid V2.52...
i see all wifi network, when it connects just stuck on connecting, then disconnect... router is 100% OK, connects with PS3 or other device OK...
obviously a problem with the MAC address, in advanced wifi is set to always and my MAC address is 74:A7:22:E5:09: DA... but in the etc / wifi / nvram.txt in line macaddr = 00:90:4c:c5:00:34 ??? not same as orginal...
any help is welcomed :good: and sorry on my bad English
pemac1987 said:
Regards to all members of xda forum
as the title says, I have a problem with connecting to any wifi network, already spent two days searching different forums, I've tried various CUSTOM ROM (zeus, miui, stock 2.2.2), but without success, currently using ParanoidAndroid V2.52...
i see all wifi network, when it connects just stuck on connecting, then disconnect... router is 100% OK, connects with PS3 or other device OK...
obviously a problem with the MAC address, in advanced wifi is set to always and my MAC address is 74:A7:22:E5:09: DA... but in the etc / wifi / nvram.txt in line macaddr = 00:90:4c:c5:00:34 ??? not same as orginal...
any help is welcomed :good: and sorry on my bad English
Click to expand...
Click to collapse
Why dont you try to set your MAC adress then? But if it doesnt work with any ROM, what about your wifi device, might it be broken? Did you already try to connect to other wifi networks? Did it work there? What channel does your router use? Maybe change it to another (between 1-10 I would say) one and try again?
Happy answering and testing
N00BY0815 said:
Why dont you try to set your MAC adress then? But if it doesnt work with any ROM, what about your wifi device, might it be broken? Did you already try to connect to other wifi networks? Did it work there? What channel does your router use? Maybe change it to another (between 1-10 I would say) one and try again?
Happy answering and testing
Click to expand...
Click to collapse
thanks for the anwser
I think that wifi device is not broken, bcuz i connect 4-5 time in 2 days... but page from browser not open... maybe 100-200kb download and stuck... then disconnect...
how to rewrite the address in the etc / wifi / nvram.txt ... I tried with root manager and busybox tutorial from this forum but without success
EDIT: i made some progress... in router settings i change to United States (even I am in Europe - Bosnia) and channel 9... connect each time but not open any page in browser ???
The address in nvram.txt is a dummy MAC address and should interfere with the actually MAC address once it's fully powered on.
xonar_ said:
The address in nvram.txt is a dummy MAC address and should interfere with the actually MAC address once it's fully powered on.
Click to expand...
Click to collapse
today i connect (router settings: US, channel 9, mac address 74:A7:22:E5:09A) work 1h without any problem, full speed, then disconnect and all day can no longer connect with same settings :/
mac address in nvram.txt is 00:90:4c:c5:00:34 ???
is there any other rom to try
pemac1987 said:
today i connect (router settings: US, channel 9, mac address 74:A7:22:E5:09A) work 1h without any problem, full speed, then disconnect and all day can no longer connect with same settings :/
mac address in nvram.txt is 00:90:4c:c5:00:34 ???
is there any other rom to try
Click to expand...
Click to collapse
The mac address in nvram.txt is dummy address. It's only used if it fails to get proper MAC address or haven't got it yet.
Perhaps it's hardware issue.
Sent from my LG-P970
xonar_ said:
The mac address in nvram.txt is dummy address. It's only used if it fails to get proper MAC address or haven't got it yet.
Perhaps it's hardware issue.
Sent from my LG-P970
Click to expand...
Click to collapse
everything is possible, I do not know what more to say ... Thanks for your help
all good
Hi,
I'm trying to connect to a WiFi network that is protected with WPA2 with PEAP / TTLS.
It simply is not working. No problems connecting with my HTC Desire though.
Anybody experiencing the same bug? I already installed the required root certificates, tried various combinations of user account / password. The thing is, that the network is provided by my university (Eduroam if you are familiar with that) and it is very annoying that I have to fall back to HSDPA consuming my data quota.
Cheers,
chross
Normally with eduroam wifi there isn't wpa2 or other key. Just connect your phone to it, open your browser and you will be redirect to the website of your university and then you can log with your id.
Envoyé depuis mon XT890
Yes!! This is the exact same problem I'm having with my university wifi
http://forum.xda-developers.com/showpost.php?p=33962871&postcount=2
I'd configure the settings on my uni wifi choosing PEAP and then MSCHAPV2 and put in my log in username and password according to the instruction and as soon as press connect or save it looses the signal immediately to very low and never connects. We also have eduroam as an alternative they tried that and same problem just doesn't want to connect.
It works perfect on my htc one x. I'm beginning to believe the phone has a bug.
It does have a bug. It doesn't connect to 802.11 n!
My problem was solved by reconfiguring my AVW Fritz!Box 7270 to 802.11 b+g only and limit the phones wifi frequency to 2,4ghz only. You can find that in advanced wifi configuration.
I'm lucky i only recognized this bug in my own wifi network and not others i don't have admin rights for...
eduroam works for me with PEAP/TTLS but I guess it's 802.11g
I'm on the 40002 rom, but worked also on the 31006
After receiving the 4.0.4 update yesterday, WiFi now works flawlessly.
Cheers,
chross
Hi there,
I got the same problem with my university network in hamburg. I updated the razor to android 4.0.4 (Stock-Rom: 81.5.40002.XT890.Retail.en.EU), also the phone is rooted but still not working. Our IT advices to use WPA2 Enterprise TTLS/PAP authenthication in combination with a t-com root certificate. Every time i safe these setting the wifi signal drops as told by previous posters and the connection fails. When i enter the settingspage again, all settings are reverted to default. This also happens, while trying to connect to eduroam
any further advices?
Thanks in advance!
I have no problems connecting to eduroam at Braunschweig and other citys. Maybe you can visit the IT Desk at your university?
jagwar1 said:
I have no problems connecting to eduroam at Braunschweig and other citys. Maybe you can visit the IT Desk at your university?
Click to expand...
Click to collapse
Yep, me and and a fellow student went there and told them about the problem. But they also gave up, after trying about an hour or so. It seems to be a general problem in the used android build, at least there are a lot of post reporting this at the google code repo -> code.google. com /p/android/issues/detail?id=15631 (sorry for that but I'm to new here to post links). I'll try the provided tips like changing the wpa_suplicant file tomorrow and report the results. Seems to be strange issue, if it works for you (and probably others), because a fellow student got the same Phone and has the same issues
Thought I'd just give an update as I have the same issue
Motorola knows about it, it's been reported to them before and said it'll be fixed with the next update.
Working smooth here with WPA2-Enterprise, PEAP and MSCHAPv2. Using it every day.
But I'm not using TTLS, you might want to disable that if you don't have a valid certificate for your mobile/user.
Also important, fill out the "anonymous user" field with your username. Depending on the RADIUS configuration of your IT this might be required.
[edit]
Just checked my mobile. I don't use a Phase 2 authentication, only EAP = PEAP, no certificates.
Got it working!
After 2 hours of searching the web and playing around, I got it working now, following this guide posted on google code repo:
Razr I (XT890), retail eu, running android 4.0.4 (stock), no root
after endless hours of trying i was able to connect to my university network a couple of minutes ago with the combination of two apps.
1. WiFi Connection Manager
Enter SSID manually
Security "802.1x EAP"
EAP Method "PEAP"
Phase 2 authentication "MSCHAPV2"
Identity "your identity"
Anonymous identity "your identity"
password "your password".
2. WiFi Advanced Configuration Editor
Check Hidden SSID
Key Management: unselect IEEE8021X, select WPA_EAP
AUTH Protocols: select LEAP
Enterprise configuration: make sure Identity and Anonymous Identity are set to your identity, Enter your password
check whether the settings are saved in WIFI Advanced Configuration Editor. If not switch of stock WiFi and repeat step 2 (!!!). Now it should work.
Turn WiFi on and connect to network (Stock WiFi; don't care about settings there, phase 2 authentification is still not saved)
After switching the device off and back on it did still work. Same when leaving and returning to WiFi area.
hopefully it will keep on working. i just tested the browser and play store. didn't discover any problems so far.
Click to expand...
Click to collapse
Connection is stable, but there seem to be some problems regarding to the speed. Whatever it's usable for stuff you do regularly @university.
Hope that helps others, thanks to klemens
hey.qb said:
Hope that helps others, thanks to klemens
Click to expand...
Click to collapse
Thank you for sharing, this made me so happy!
It's those two apps which made my connection possible.
My eduroam configuration is quite different, but the apps did the trick. I fiddled with advanced wifi config editor alone for hours without any result.
Now I just hammered the config into those two apps and what can I say - proxydroid reported a connection a few seconds later.
I dont't know what Moto's Problem with 802.1X is.
Defy latest stock rom - no connection. With CM -> no problem.
Milestone 2 with stock rom - no connection. With CM -> no Problem.
Rarz I no connection with stock wifi manager . . .
My fellow students with their samsung devices seem so have no problem at all. ^^
(even Win Mobile 6 works, thats a little bit depressing)
btw, speed is fine here. 16Mbit up&down is more than I need on a phone.
Greetings from Kiel.
Hello guys
I'd like to ask if anyone of you came across this issue? Tethering doesn't seem to work. When I check WiFi AP mode it just stays at "Turning on WiFi" and doesn't change at all. I can see this network on my laptop, but when I connect to it DHCP doesn't seem to work, and even setting IP address manually + DNS names doesn't solve problem. There is no AP mode icon on the top bar on the phone. There are also issues with the USB Thetering, I have to turn on and of it multiple times before it works. Once turned on it says it's on on the phone, but computer doesn't recieve proper IP adress and DNS servers.
Anyone had similar problems?
Sorry to post in here, but as I'm less than 10 posts I can't post in the ROM's native post
szczypiorek said:
Hello guys
I'd like to ask if anyone of you came across this issue? Tethering doesn't seem to work. When I check WiFi AP mode it just stays at "Turning on WiFi" and doesn't change at all. I can see this network on my laptop, but when I connect to it DHCP doesn't seem to work, and even setting IP address manually + DNS names doesn't solve problem. There is no AP mode icon on the top bar on the phone. There are also issues with the USB Thetering, I have to turn on and of it multiple times before it works. Once turned on it says it's on on the phone, but computer doesn't recieve proper IP adress and DNS servers.
Anyone had similar problems?
Sorry to post in here, but as I'm less than 10 posts I can't post in the ROM's native post
Click to expand...
Click to collapse
That is a CyanogenMod 10 bug, and it wont work on any 4.1.2 ROM, however, usb tethering is working fine for me without any issues...hotspot doesn't work...
warrior1208 said:
That is a CyanogenMod 10 bug, and it wont work on any 4.1.2 ROM, however, usb tethering is working fine for me without any issues...hotspot doesn't work...
Click to expand...
Click to collapse
Yes, I noticed that in other thread which didn't load for me last time as I was using USB tethering while traveling with train so I had some service issues. Sorry to spam the board.
On the other hand, are there any plans to make miniCM on a base of 10.2CM? There are some features introduced in 10.2 like custom icons that I am interested in..
10.2 is not stable for our device... And the development has been abandoned.... So it's highly unlikely it would happen. But the devs are working on 4.4 so we should have that working soon.
Sent from my HTC Desire C using XDA Premium 4 mobile app
Hlo, i am using cr Droid OS in my lenovo-a7000 aio row. But my problem is it is taking forever to connect to wifi. It is either saying authentication problem, or password incorrect. My other androids are connecting smoothly. Can you please anyone help me? @AKS12 @hrdr
Go to settings and reset network settings and you're done, hope this helps.