Related
Hello everybody,
i would like to get some estimations regarding the quality of the GPS.
Please on the hardware- and the software end.
Last years i used a samsung I9300 and the GPS was fine.
Then i switched to an Elephone P9000. I think from the hardware end GPS was fine, but
it didn't work very well, maybe due to bad software? And it seems to be a common mediatek problem?
I didn't find anything in the internet, what do you think, does the GPS in p9 plus work well?
THX a lot,
Henning
As per my experience my P9 Plus has one of the best GPS I've ever experienced and it even works in the airplane pretty much accurately when comparing to airplane instruments. I'm based in SE Asia and have reception of American, Russian and few Chinese satellites and fix is pretty fast. No complaints here whatsoever.
Yes. GPS is great...
Hi,
in the meantime i also bought this phone.
I can confirm now that the GPS is very good.
It is even possible to see the two tracks on the road next by next if you drive
to a destination and come back the same way.
Also, had never this accurate GPS before...
lg
Henning
Model number?
Great to hear that you all have a good gps signal. I just bought the p9 plus too. But strangely the gps signal seems like "not so good" , in my opinion. The story has to begin with my previous Huawei's phone.
I had previously owned the mate 7, which it was came with KitKat version and the GPS worked flawlessly. I updated it to lollipop then and the GPS still work perfectly, once turn on the gps, it takes only seconds (yes, it's really seconds, less than 5 seconds to be more appropriate...) to locate where I am. Those day I enjoyed using the gps as it was super fast and accurate. But things changed after I updated it to marshmallow recently. It became very unstable, very inaccurate. So I install the app "GPS test" and found that the accuracy is upto 150 feets which is very inaccurate (I can assure that the accuracy on KitKat and lollipop were only few feets or the most 10 plus feets, It was really super fast and accurate previously....). I know that weather, such as cloudy situation will affect the accuracy, numbers of satellites working etc so I tried to find out if that's the case but nope, I compared it with my cheap Elephone gps and under the same time same condition, I open the app and tested the gps, Elephone gave me the accuracy of 12 feets !
Sometimes when I try to use maps, it even can't detect where I am and if it does, it shows a wrong location. So I thought it is the problem of marshmallow as I searched on other forum and discovered that people also facing gps issue on Nexus phone with marshmallow version. I tried fixing it with another app "gps status & toolbox" , and also found out that "use wifi to improve accuracy" had to be turned on but the accuracy still only about 50 plus feets.
Then I bought the p9 plus, and hope that everything shall be very good just like the mate 7 KitKat and lollipop version, but it is not! The accuracy is also 50 plus feets after doing all the improvement work as above. So dear fellows I would like to ask what is your version of marshmallow and what is the accuracy of your p9 plus? Mine is VIE-L29C20B100. I am thinking if my version is not updated to the latest? And if there is a latest version , does the gps work good?
Hey guys!
I´m not really pleased with the performance of the GPS on my P9 plus ... but the app itself could be to blame. I was traveling on the highway and the navigation got confused and thought i´m traveling on the road parallel to the highway (surely minimum 100m distance between them). I´m using OSMand+ for navigation and it worked fine with other phones so far. Which app are you using?
I use Google maps, it works great imho, I came from a Galaxy S5
Try to create a new user profile on the phone. Switch to the new user and check if the GPS still behaves as you mentioned.
Hi all,
just to give some updates on my findings. Recently I went through a youtube video comparing mate 9 and p 9 plus (https://www.youtube.com/watch?v=_0impUegGO0&t=2s), at time 10:32 it showed exactly the GPS app that I use to test the GPS signal and it also showed exactly the same results as my p9 plus. This being said, I believe there is no way we can further improve the GPS accuracy and I suspect it is due to mashmallow problem (as I had said KitKat and lollipop run very well in accuracy and Nexus user with mashmallow also complain their GPS accuracy is not good), not because phone GPS not good. So maybe we will have to wait till Huawei release firmware update for android Nougat and see if it improves the GPS accuracy.
However, having said that, I didn't really find the GPS signal "not good" in real life. I mean, when u use the GPS app test the GPS it gives "not good" accuracy, but when I open the map for navigation, what I experience so far is EXTRAORDINARY GOOD. I turn on the GPS and immediately switch on the map app, it instantly locate where I am, not even trying to "looking for GPS signal", really really fast, really instantly locate where I am. And it is super accurate. So I think maybe the GPS app is not something that we should use to gauge whether the phone GPS quality good or not, the real life performance will tell more truth. Just like Antutu does not always really reflect the real performance of the phone.
So for those who are having GPS problems when using map, I will suggest u all try to use another map app, maybe the problems really came from the map itself but not phone GPS problem. So for this moment I will stop looking for solution to improve the GPS accuracy (on the GPS app wise), and enjoy using my p9 plus, hope u guys too
Hi, as you say, forget tests, how does it actually work in real life.
Bought my wife one a few days ago and last 2 days testing gps driving around was only seconds to fix and no dropouts in about 1 hour driving. Thats my test.
Great phone by the way, and top quality finish.
If only it had an FM radio...
Sent from my HTC One_M8 dual sim using XDA-Developers mobile app
I find it's slow to lock or find a location, compared to my previous phone (Z Ultra).
If I'm somewhere (even outside, away from buildings, with clear view of the sky) it will take a good few seconds to lock onto my location. Old phone, and even my tablet, are almost instant, taking no more than 1-2 seconds.
This is using Google Maps.
Just a minor niggle, but can be annoying when in the car and needing to find directions quickly.
djyoshii said:
I find it's slow to lock or find a location, compared to my previous phone (Z Ultra).
If I'm somewhere (even outside, away from buildings, with clear view of the sky) it will take a good few seconds to lock onto my location. Old phone, and even my tablet, are almost instant, taking no more than 1-2 seconds.
This is using Google Maps.
Just a minor niggle, but can be annoying when in the car and needing to find directions quickly.
Click to expand...
Click to collapse
Staying outside, especially without any buildings around or an empty land, could be harder for the gps to locate you. I am guessing... This sounds not logic but let me tell what I found again...
Recently I use an app which provide public transport info. This app needs gps in order to locate where are you and provide the info for the public transport at the area you are standing at. Just when I switch on the app and yet to switch on gps, my gf helped me to press the "locate me" button and I was telling her don't do silly things as I haven't turn on gps. But right after that the phone located where I was! I was like ehhh...... how come.... I double check and confirmed that I didn't switch on gps!
So again, recently I am adjusting the phone settings hoping to lengthen the phone battery (even though it's already very good. I can use it for 2 days per charge ). I found something very annoying in one of the setting - location services. Numeral time I have chose the 1st option "use gps, wifi and mobile networks (high accuracy)" and it keeps set it back to the 2nd option " use wifi and mobile networks ". I thought it was a bug of the phone but then later when I relate it to the event happened earlier (the public transport event mentioned above), I was thinking could it because I never turn on gps? then I turned on gps and yes, it automatically switch to the 1st option, and when I switch off gps, it auto switch to 2nd option again.
I then realized that other day when the phone located me without turning on gps, I was close to the MRT station which provide free wifi. And I am not sure do you guys ever experience that sometimes when you switch on the map app without turning on gps, the map itself locate where u r (maybe not very accurate but it's at the bearby area), just that when u try to use the map it will ask u to switch on gps.
That being said, I suspect the phone continuously locate where we are by using the wifi router(if any, at the nearby place) because wifi router is location specific? (not sure, maybe expert know this...) and that's why when u don't switch on gps, it is already "pre-locate" where u r and only if u switch on gps it will immediately give u the accurate position. And that also means if u stay outside without any buildings (and so without wifi too), the phone could not pre-locate u and it will solely rely on gps and that's why take some time to locate where u r?
Anyway this weekend I will be going for a long distance trip and will test the gps to see if the phone give good gps signal
just back from the long journey vacation. The phone gps works flawlessly without dropping off at all. And time to locate also excellent within 2 seconds
So I just got my new Huawei P10. Installed all of my usual rubbish, then installed a network speed test app. Ran a test while in the same room as the router, connected to my 5Ghz (AC) WiFi (I'm on Virgin UK 200mbps). Maximum 31mbps download. Obviously concerned by this I turned off my WiFi, then turned it back on. Same again, maximum 31mbps download. I then switched to 2.4Ghz to try this. Maximum 7mbps download. I started to realise something wasn't right here. I got my old Moto E 2nd Gen, downloaded the same network speed test app and ran it. Obviously the Moto E 2nd Gen can only connect to 2.4Ghz WiFi. Maximum 40mbps download, about right for an old device like that.
I then performed a hard reset of my Huawei P10, didn't install anything at all except for the network speed test app, and ran it again using both the 5Ghz (AC) and 2.4Ghz. The results were the same, 31mbps maximum download on 5Ghz (AC) and 7mbps download on 2.4Ghz. I've tried restoring the router to factory defaults, I even tested in my brothers home (300mbps Virgin UK) and my daughters home (76mbps PlusNet), and the results were the same. I have no issues with any other devices in my home, just the P10. I'm on EE UK with 60mbps 4G, and running the speed test while connected to 4G gives me the full 60mbps. I've tried several different speed test apps, and the results are always the same.
Clearly there's something not right when the WiFi on an old Motorola out-performs a spanking new Huawei P10. I thought I would check here for solutions first before yelling and screaming at Carphone Warehouse. Any advise would be appreciated, thanks.
BR
Julie
P10 slow wifi
Hiya I'm in the same boat. Struggling to reach 30mbps on my new p10 where my iPhone 5 can reach 70+mbps on same network. I'm also struggling to find any answers online. So did you manage to find a solution?
Just tested my P10. I'm on 400/20 Unitymedia in Germany.
Router is in the next Room.
What's your Firmware?
Issue Resolved
Well it's fixed, no thanks to Huawei. It turns out I was several firmware versions behind. I assumed I was on the latest stable firmware version because neither the System Update or HiCare apps were offering an update. It was only after installing the FirmwareFinder that I was able to update from B133 to B175. This is a SIM Free device, surely B175 should have been offered OTA?
Cool! I'm glad you've got it fixed!
energy6uk said:
Well it's fixed, no thanks to Huawei. It turns out I was several firmware versions behind. I assumed I was on the latest stable firmware version because neither the System Update or HiCare apps were offering an update. It was only after installing the FirmwareFinder that I was able to update from B133 to B175. This is a SIM Free device, surely B175 should have been offered OTA?
Click to expand...
Click to collapse
How did you manage to get B175? I got the same EE device as you and FF offers me nothing. Still on B171.
greycounciller said:
How did you manage to get B175? I got the same EE device as you and FF offers me nothing. Still on B171.
Click to expand...
Click to collapse
I believe B175 is for SIM Free devices only. I have a friend who has an EE branded P10, and he's also only on B171. This is because B171 is the latest version made available by EE. Now looking forward to Oreo and all the problems that may bring :good:
How did you get the patch to install after Downloading it please?
I have the P10 since 2018 and run now on the official Android 9.1.0. The phone olway connect only to 45 Mbps on my 5 Ghz band. Dowvnloads seams not to be affected but uploade speed never get over the 45 Mbps limit. Other devices on the network dont have any speed problems. I noticed this behavior since the Android 9 update and I thinks Huawei intentionaly limits the wifi speed to make you think your device is outdated and make you by another, something like they did with the OIS stablilizer.
I have a Mi 9 and recently updated via OTA to Android 10 with the bundled MIUI 11. I'm now running MIUI 11.0.6.0 (QFAEUXM) Global Stable.
I just noticed that the Dual GPS option have disappeared from the drop down quick settings, and was replaced by just a "Location" toggle. I used a GPS checker app, and indeed, the dual GPS was somehow disabled or disappeared after the update as it was only showing L1 and E5 bands. For dual bands, the L5 and E5a should also be displayed on the GPS tracker app as well.
Is there a way I can enable the dual GPS back? It's not a major issue, but it will be disappointing as the dual-band GPS was really useful during the short time I used it prior to the update and also one of the reasons why I got this device.
Cherby21 said:
I have a Mi 9 and recently updated via OTA to Android 10 with the bundled MIUI 11. I'm now running MIUI 11.0.6.0 (QFAEUXM) Global Stable.
I just noticed that the Dual GPS option have disappeared from the drop down quick settings, and was replaced by just a "Location" toggle. I used a GPS checker app, and indeed, the dual GPS was somehow disabled or disappeared after the update as it was only showing L1 and E5 bands. For dual bands, the L5 and E5a should also be displayed on the GPS tracker app as well.
Is there a way I can enable the dual GPS back? It's not a major issue, but it will be disappointing as the dual-band GPS was really useful during the short time I used it prior to the update and also one of the reasons why I got this device.
Click to expand...
Click to collapse
I'm on xiaomi eu 9.11.28 and what i see is: L1 and L5 for GPS, L1 for GLONASS , E1 and E5a for Galileo, B1 for BeiDou and L1 and L5 for as i understand QZSS (Japan)
As i understand it's not the option was disappeared, it's just the icon has been changed
Hey, I am also on 11.0.6.0 and have noticed the same missing information and icons for dual GPS functionality. However, I ran the GPSTest app and you can check the attachment.. Just note that I am in the southern hemisphere and did the test indoors.
Double gps icon removed. All gps managers work.
Here's a screenshot from the GPSTest app. Not a single L5 or E5a frequency is shown.
Cherby21 said:
Here's a screenshot from the GPSTest app. Not a single L5 or E5a frequency is shown.
Click to expand...
Click to collapse
May be it's because of your region. Xiaomi love to make things available or not available depending on were you live.
Cherby21 said:
Here's a screenshot from the GPSTest app. Not a single L5 or E5a frequency is shown.
Click to expand...
Click to collapse
This just depends on your current location. As you can see from the flags you're receiving GPS, Glonass and Galileo satellites. Furthermore if you click 'Sky' in the menu you'll see the current satellites and their respective system in a celestial view.
Cheers
Toscha
Just wanted to chime in as a Pixel 4 user.
I get L5/E5a in the USA, but it isn't instant. I have to sit there with the GPSTest application open, and eventually it picks them up. It's not an instant lock even though L1 is instant, and usually not within 15 seconds, despite already having locked on to the satellites which output L5/E5a signals.
On top of that, the L5/E5a bands don't stay locked. After being locked for a short period (maybe 2 minutes?), then they all disappear, and then take some time to come back, then all eventually disappear again. I have GNSS duty cycling disabled in developer options. I think it's a bug, in addition to the minimum accuracy in Android being hard-coded to not calculate better than 12.4ft/3.8m for horizontal and 8.2ft/2.5m for vertical:
https://issuetracker.google.com/issues/146010208
Deleted
Jon8RFC said:
Just wanted to chime in as a Pixel 4 user.
I get L5/E5a in the USA, but it isn't instant. I have to sit there with the GPSTest application open, and eventually it picks them up. It's not an instant lock even though L1 is instant, and usually not within 15 seconds, despite already having locked on to the satellites which output L5/E5a signals.
On top of that, the L5/E5a bands don't stay locked. After being locked for a short period (maybe 2 minutes?), then they all disappear, and then take some time to come back, then all eventually disappear again. I have GNSS duty cycling disabled in developer options. I think it's a bug, in addition to the minimum accuracy in Android being hard-coded to not calculate better than 12.4ft/3.8m for horizontal and 8.2ft/2.5m for vertical:
https://issuetracker.google.com/issues/146010208
Click to expand...
Click to collapse
Same. I just noticed the L5 and E5a bands take a while to lock on, or at least only appear at certain times (mostly at night) on my region (Southeast Asia).
Jon8RFC said:
Just wanted to chime in as a Pixel 4 user.
I get L5/E5a in the USA, but it isn't instant. I have to sit there with the GPSTest application open, and eventually it picks them up. It's not an instant lock even though L1 is instant, and usually not within 15 seconds, despite already having locked on to the satellites which output L5/E5a signals.
On top of that, the L5/E5a bands don't stay locked. After being locked for a short period (maybe 2 minutes?), then they all disappear, and then take some time to come back, then all eventually disappear again. I have GNSS duty cycling disabled in developer options. I think it's a bug, in addition to the minimum accuracy in Android being hard-coded to not calculate better than 12.4ft/3.8m for horizontal and 8.2ft/2.5m for vertical:
https://issuetracker.google.com/issues/146010208
Click to expand...
Click to collapse
It's looks like app scanning for satellite signals. It's not like it's need just to find 3-4 satellites and calculate your location, it's looking for all available satellites and from all available systems (GPS, GLONASS, Galileo and etc.). So i don't think it's a bug it's just a scanning process and it takes some time.
In sky view you can see how statuses of satellites changes in live, so it's not only scan it's a live endless scan process
Here're two screenshots, linear distance of the measurement approx. 50 km. It's also different days (December 17, December 19) as well as different times (12:15 pm, 4 pm). However there're significantly less satellites on the latter screenshot. But in both cases L1 and L5, meaning dual frequency GNSS.
Cheers
Toscha
I have a Xiaomi Mi 9T Pro, Global version (I'm in Europe), running MIUI 11.0.3.0 Stable on Android 10. What I've noticed is that while I do have the Dual Frequency icon and the signals are tracked, they are not used. I'm sure that they were used before, but don't remember if it was before or after updating to Android 10. It does take a few seconds for L5/E5a frequencies to appear using GPSTest, but hen they appear without a problem. But they never show the flag "U", which means "Used". So it's pretty much the same as not having them. I'll test other days and outdoors to see if it's always the same.
I have my MI 8 recently updated to Android 10 MIUI 11.0.3.0 (QEAMIXM) Global Stable. After this, no Galileo Signal is available any more. Under Android 9 it was already working. Hope they will fix this issue.
Hello Friends of Pixel Experiences. Thank you, I congratulate you for your good work in the development of the different ROM's.
I need your help. I have a Moto G5S Plus, everything works perfectly, but I want the system not to place me Mac from random WiFi, I need the Mac address of my cell phone to be static. since I only connect my equipment in my home and where my family. Also, at home I have mac filtering on the router. Could someone help me to configure the cell (it could be by command console), since on the internet I found a video, but the options indicated in it do not appear on my cell phone.
Best Buy! World Premiere Sale with Coupon Code for POCO X3 NFC @ Aliexpress
[World Premiere Flash Sale In Stock] POCO X3 NFC Global Version Snapdragon 732G Xiaomi Smartphone 64MP Camera 5160mAh 33W Charge
18709 orders
Hello, I recently bought a Xiaomi Mi11T (MIUI 13 Global) , and since then I have noticed that when sharing internet, the internet on other devices is slow (1/2 mb/s ), after restarting the mobile the other devices are already at normal speed ( 40 mb/s ), but after about 5 minutes it becomes slow again.
I've had a search and some people also have the same problem but no resolution.
Does anyone have any ideas or solutions for this problem? Yeah, I need to share internet everyday to my Tablet and PC.