Hallo.
Recently I bought note 9, with android 9. I tried to upgrade via software update, but after "registering device" I have "process failed". I tried smart switch, but with no luck. I have launched Odin as an administrator, with different cables, but with no luck. I don't know if bootloader is unlocked (*#*#7378423*#*# gives me nothing)
model SM-N960F
baseband version N960FXXS4CSK2
csc N960FOXM4CSK2
I have tried the following roms
N960FXXU4DSLB
N960FXXS4DTA1
N960FXXS5DTB6
N960FXXU9FVH1
N960FOXM9FVG2
N960FXXSAFWB3
Depends of what I choose I results are similar:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 7041 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 7041 M
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1401)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 6936 M
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me, I would really like to have android 10.
I would stay on Pie. I have 2 stock N10+'S, one running Pie the newer one is on Q. The Pie variant is far less complex and easier to troubleshoot; Q adds dozens of new small system apps. Pie appears to get better SOT, both devices are optimized.
Q does a few nice tricks like better dark mode but is less functional with some apps like valuable Karma Firewall.
Pie is reasonably secure unless you do stupid things. This load will be 3 yo in June, still running fast and stable with minimal maintenance and no malware in that time.
The N9 doesn't have the speed of the N10+ and using Q may adversely effect performance. I would not expect any performance boost with Q, just the opposite. If the bootloader is upgraded no rollback to Pie will be possible. In my opinion you have more to lose than to gain by upgrading to Q. Both my N10+'s will remain on their factory loaded firmware*.
All that said Pie is still my preferred OS and it has no cpu cycle sucking scoped storage. Good as it gets.
*the N10+ running on Pie had the last updates for that version, the one running on Q is still the factory load version.
Related
I tried to update my old phone from 4.4.2 rooted to 5.0.1 and keep the root by having my cousin do it for me. Unfortunately, he used the guide on here for the normal S4 instead of the S4 Active, leaving me with a phone that says "System software not authorized by AT&T has been found on your phone" and "SECURE FAIL: KERNEL" in the corner. Google searches are fruitless. I have tried using this method, but upon starting ODIN I get this fail message and the following:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
If anyone could help me make my old phone work again, it would be very appreciated.
Hello everyone need some advice/help.
I have an ATT note 3 running 4.3 and I'm ready to upgrade to something newer due to issues. I'm looking to do 5.1.1 or 6.0 but someone told me 6.0 doesn't support call audio. I tried to download and flash from here : http://forum.xda-developers.com/galaxy-note-3/development/rom-unofficial-cyanogenmod-13-0-t3238064 under older versions
but the files do not show up in my Odin version is 3.10.7. I downloaded version cm13.0 20160128. I also downloaded banks dynamic g apps but still see nothing under the download files in odin. Any help is greatly appreciated. I can see the folders but they are all empty or do not contain files that odin recognizes.
So I am even worse off now. I did a factory reset and it wiped everything but it shows my phone is still rooted. It will not connect to play store and wont sync my gmail account though it lets me sign in now. It is also not reading the apps on the sd card. Please help!! It shows 5 gb of data on sd card but no apps.
Ok,
First this is if your note 3 is an AT&T branded device. The boot loader is locked so you can not use a CM 13 ROM. There are only certain workarounds we can do and ROM's to choose from. The highest we can go is OC1 and OC2. This is because we do not have a Kernel to allow us to go higher.
First things first, is to get your phone back to a usable state.
Go to this link http://forum.xda-developers.com/showthread.php?t=2703006
Read it beginning to end, download all the files and then reread the instructions again in the first post. It sounds like you need to start by going back to NC2 and work your way forward. go down to the section that starts like this.
This is from Carl1961, all thanks go to him! He has saved my bacon many times!
UPDATING TO LOLLIPOP AND KEEPING ROOT
FIRST DO THIS
1. You must have Safestrap Recovery working (you can boot to safestrap) If Not go to NC2 Files and Install NC2 Odin Files and get safestrap working.
2. First Do a TWRP Backup if you have not done one.
3. download below files and copy to your SDCARD
"N900A_NL1_Stock_Rooted_Backup" from [How-To] Root N900AUCUDNL1 4.4.4 (12-24-2014) THANKS !!! @muniz_ri and copy to your TWRP backup folder (here is my TWRP Folder TWRP\BACKUPS\0b70b440\N900A_NL1_Stock_Rooted_Backu p
SM-N900A_NL1_Firmware_Recovery-Flashable.zip
N900A_NL1-OC1-KeepRoot_OTA.zip
UPDATE-SuperSU-v2.45.zip THANKS !!! @Chainfire
SM-N900A_N900AUCUEOC1_KERNEL_Recovery-Flashable.zip
1. Boot to safestrap recovery, Press Wipe and slide the slider to ok the wipe.
2. Restore Backup N900A_NL1_Stock_Rooted_Backup This gives us rooted NL1
3. Without leaving Recovery install SM-N900A_NL1_Firmware_Recovery-Flashable.zip This installs the NL1 firmware (or N900A_NL1-OC1-KeepRoot_OTA.zip will fail)
4. Without leaving Recovery install N900A_NL1-OC1-KeepRoot_OTA.zip
5. Without leaving Recovery install UPDATE-SuperSU-v2.45.zip to update SuperSu for Lollipop
6. Without leaving Recovery install SM-N900A_N900AUCUEOC1_KERNEL_Recovery-Flashable.zip to boot to New Lollipop Update.
Well I am trying to revert back to original 4.3 then upgrade and re root but I am getting error messages in odin.
ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N910AATT1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? These files were from wen I first rooted my phone in 2014.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N910AATT1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
vv<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Made it to here. On device it says SW REV CHECK FAIL : [sbl1] Fused 2> Binary 1
Try older version of ODIN. This is a common problem when using older files/system.
trying to reload the software on a note 8 and it keeps getting stuck here
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1210)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> abl.elf.lz4
Odin 3.12.1 & lz4 is the issue. Need to use Odin 13.3.1 for newer FWs that use lz4 compression.
shouren04 said:
Odin 3.12.1 & lz4 is the issue. Need to use Odin 13.3.1 for newer FWs that use lz4 compression.
Click to expand...
Click to collapse
13.3?
Oops, haha. 3.13.1
Greetings, I'm trying to flash the U1 firmware on my S10 that is currently ATT. I downloaded the drivers, files from iBowToAndroid's post, and used SmartSwitch for back up. I've factory reset prior to going into download mode as well. Here is the output I got from my latest attempt to get this done:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7527 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7527 M
<ID:0/004> SetupConnection.. (At this point, it stopped here for about 5 minutes before continuing
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help is greatly appreciated.
kdog2021 said:
Greetings, I'm trying to flash the U1 firmware on my S10 that is currently ATT. I downloaded the drivers, files from iBowToAndroid's post, and used SmartSwitch for back up. I've factory reset prior to going into download mode as well. Here is the output I got from my latest attempt to get this done:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7527 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7527 M
<ID:0/004> SetupConnection.. (At this point, it stopped here for about 5 minutes before continuing
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help is greatly appreciated.
Click to expand...
Click to collapse
Try Odin that I have attached and make sure that your current firmware on the phone and the one you are trying to flash are from within the same build/month or the firmware you are trying to flash is newer.
I have an unlocked AT&T Note 9 that is stuck on Android 8.1.0 Patch 11/1/18.
There is higher existing firmware I have found but I am having no luck getting it to update via OTA where it is on MetroPCS now, and smart switch says it is up to date. When I try to update using Odin 3.14 using a couple of different firmware's I get the same error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 7842 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7842 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Can anyone please help??? I have been reading and working on this for about a month now with no luck.
Try a computer with USB 2.0 or buy a USB 2.0 port hub.
dehart420 said:
I have an unlocked AT&T Note 9 that is stuck on Android 8.1.0 Patch 11/1/18.
There is higher existing firmware I have found but I am having no luck getting it to update via OTA where it is on MetroPCS now, and smart switch says it is up to date. When I try to update using Odin 3.14 using a couple of different firmware's I get the same error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 7842 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7842 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Can anyone please help??? I have been reading and working on this for about a month now with no luck.
Click to expand...
Click to collapse
You're trying to update to ARL1?